Fibre optic interconnecting devices and passive components. connector optical interfaces End face geometry. Flat PC PPS rectangular ferrule multimode fibres
€193.00
Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
€88.00
IEC PAS 63267-3-31:2020 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-31: End face geometry - Flat PC PPS rectangular ferrule multimode fibres
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic (IEC 61300-2-46:2019); German version EN IEC 61300-2-46:2019.
€98.32
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
€171.00
Amendment 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
€11.00
Fibre optic interconnecting devices and passive components. Basic test measurement procedures Tests. Corrosive atmosphere (mixed gas)
Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications Singlemode fusion splice protectors
€299.00
VPX: Coaxial Interconnect on VPX, 8 Position SMPM Configuration
€27.50
€68.00
Dispositifs d'interconnexion et composants passifs fibroniques - Méthodes fondamentales d'essais et de mesures - Partie 2-54 : essais - Atmosphère corrosive (mélange de gaz)
€52.00
Fibre optic interconnecting devices and passive components. Basic test measurement procedures Examinations measurements. Switching time
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas)
€44.00
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre; German version EN 50377-18-1:2019
€116.64
Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-3 : singlemode optical fibre fusion splice protectors - Systèmes de gestion des fibres et enveloppes de protection destinés à être utilisés dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 3-3 : protecteurs d'épissures par fusion de fibres optiques unimodales
€126.00
