Connectors for frequencies below 3 MHz use with printed boards Two-part connectors boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
€404.00
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors basic grid of 2,54 mm (0,1 in), square male contacts 0,63 x
€374.00
Connectors for frequencies below 3 MHz use with printed boards Edge-socket connectors and board 2,54 mm (0,1 in) contact spacing single or double-sided of 1,6 (0,063 nominal thickness
€316.00
Connectors for frequencies below 3 MHz use with printed boards Edge-socket connectors and two-part double-sided 2,54 mm (0,1 mm) spacing
Connectors for frequencies below 3 MHz use with printed boards Two-part connectors having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations that same spacing
€269.00
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997
€128.22
Domestic and similar electronic equipment interconnection requirements : peritelevision connector.
€82.00
Solderless connections - Part 1: Wrapped connections; general requirements, test methods and practical guidance (IEC 60352-1:1997); German version EN 60352-1:1997
€91.03
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998
€116.64
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
€88.00
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
€286.00
Connectors with assessed quality, for use in D.C. Low-frequency analogue and in digital high-speed data applications. Part 3 : rectangular connectors. Section 101 : detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line.
€184.00
Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 15 : essais mécaniques des contacts et des sorties. Section 8 : essai 15h : résistance du système de rétention des contacts à l'utilisation des outils.
€37.33
Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 12 : essais de soudure. Section 6 : essai 12f : étanchéité aux flux et solvants de nettoyage dans une machine à souder.
€77.67
SECTIONAL SPECIFICATION: RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ.
€90.00
