Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003
€150.65
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003.
€56.17
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests and overload tests - endurance tests and overload tests - Test 10d: Electrical overload (connectors) (IEC 60512-10-4:2003); German version EN 60512-10-4:2003.
Multipole Connectors with Blade Contacts 3 × 1 mm; Dimensions
€34.30
Multipole connectors with blade contacts 2,5 mm × 1 mm; locating and detent parts
€24.39
Electric communication engineering; three-pole plug, 5.75 mm diameter
Solderless connections - Part 6: Insulation piercing connections; general requirements, test methods and practical guidance (IEC 60352-6:1997); German version EN 60352-6:1997.
€91.03
Solderless connections - Part 1: Wrapped connections; general requirements, test methods and practical guidance (IEC 60352-1:1997); German version EN 60352-1:1997
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998
€116.64
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997
€128.22
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14-17:1998
€41.78
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification: General requirements and guide for the preparation of detail specifications, with assessed quality (IEC 60603-1:1991 + A1:1992); German version EN 60603-1:1998
€105.42
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (O,1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987); German version EN 60603-3:1998
€98.32
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987); German version EN 60603-4:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987); German version EN 60603-5:1998
€122.34
