| Nombre | apoyo | Revisión | Disponibilidad | Fecha de emisión | Precio | ||
|---|---|---|---|---|---|---|---|
|
Papel |
Inglés |
Vigente |
15/9/2015 |
1.884,00 € |
|
||
Detalles
1 Scope
1.1 These requirements cover LED equipment that is an integral part of a luminaire or other lighting equipment. These requirements cover components including LED drivers, controllers, arrays (modules), and packages as defined within this standard.
1.1.0 LED equipment covered by this standard are intended for operation in the visible light spectrum between 400 – 700 nm.
Special Use LED arrays as described in Supplement sj have intended applications other than general illumination and may operate outside of the visible light spectrum.
1.1.1 LED controllers covered in this standard are intended to be:
a) Integral to the luminaire, or
b) Located remotely from the luminaire when the LED controller is supplied from and controls the luminaire using only Class 2 circuits.
1.1.2 These requirements do not cover LED controllers intended for installation inside a remote electrical outlet box containing Class 1 circuits.
1.1.3 These requirements do not cover LED controllers within the scopes of the following standards:
a) Standard for Safety for Plug-In Locking Type Photocontrols for Use with Area Lighting, UL 773, or
b) Standard for Safety for Solid-State Dimming Controls, UL 1472.
1.2 These lighting products are intended for installation on branch circuits of 600 V nominal or less in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and for connection to isolated (non-utility connected) power sources such as generators, batteries, fuel cells, solar cells, and the like.
1.3 LED equipment is utilized in lighting products that comply with the end-product standards listed below. The requirements in this standard are intended to supplement those in other end-product standards. Included are:
a) Electric Signs, UL 48,
b) Portable Electric Luminaires, UL 153,
c) Underwater Luminaires and Submersible Junction Boxes, UL 676,
d) Emergency Lighting and Power Equipment, UL 924,
e) Stage and Studio Luminaires and Connector Strips, UL 1573,
f) Track Lighting Systems, UL 1574,
g) Luminaires, UL 1598,
h) Direct Plug-In Nightlights, UL 1786,
i) Low Voltage Landscape Lighting Systems, UL 1838,
j) Self-Ballasted Lamps and Lamp Adapters, UL 1993,
k) Luminous Egress Path Marking Systems, UL 1994, and
l) Low Voltage Lighting Systems, UL 2108.
1.4 The requirements in this standard do not anticipate additional construction, performance and marking considerations for the following end-applications: LED equipment subject to weather (outdoor use), LED equipment installed in air handling spaces or in other environmental air spaces (plenums) and LED equipment used in fire rated installations. LED equipment with such end-applications is subject to additional evaluation per applicable standards.
Información adicional
| Autor | Underwriters Laboratories (UL) |
|---|---|
| Publicado por | UL |
| Tipo de Documento | Norma |
| Edición | 2 |
| ICS | 29.140.01 : Lámparas en general
29.140.40 : Luminarias |
| Número de páginas | 133 |
| Reemplaza | UL 8750 (2009-11-18) |
| modificado por | Révisions (2021-01-05) , (2020-09-11) (2020-04-28), (2019-07-30), (2018-08-22),(2018-02-06), (2018-02-05), (2017-12-18), (2017-07-27), (2016-10-21), (2017-08-17), (2016-11-23),(2019-10-11) |
| Peso(kg.) | 0.3261 |
| Palabra clave | UL 8750 |
| ANSI Approved |
