ASTM
-
ASTM Research Report RR:D02-1475
An interlaboratory study was conducted for test method D5453 to establish a precision statement for sulfur content in gasoline, diesel, bio-diesel and kerosene.
3/1/2000 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D27-1013
An interlaboratory study was conducted by thirty-six laboratories which tested nine materials to establish the precision statement of test method D4059.
3/1/2000 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E05-1009
An interlaboratory study was conducted by six laboratories testing ninety-six specimens to establish a precision statement for test method E1352.
3/1/2000 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:F02-1015
An interlaboratory study was conducted by six laboratories which tested 6 materials to establish the precision statement of test method F2013.
3/1/2000 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1473
The test development of the Sequence IVA has followed a logical process that has yielded a precise test capable of evaluating lubricants for valvetrain wear which has correlated to the camshaft wear of the ASTM Sequence VE.
16/12/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:C08-1015
An interlaboratory study was conducted by a single laboratory testing a refractory mortar to establish a precision statement for test method C1445.
14/12/1999 - PDF - Inglés - ASTM
Más información50,40 € -
ASTM Research Report RR:D02-1470
An interlaboratory study was conducted to determine precision values for the D3230 test method.
14/12/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:G02-1011
An interlaboratory study was conducted by five laboratories testing three lubricated and unlubricated plastic web samples to establish a precision statement for test method G164.
2/12/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D27-1012
An interlaboratory study was conducted by thirty six laboratories testing six samples to establish a precision statement for test method D1533.
1/12/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1468
An interlaboratory study was conducted to establish the precision statement for the drivability index in test method D4814.
26/10/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1465
An interlaboratory study was conducted for test method D5453 to establish a precision statement for gasoline.
27/9/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1466
An interlaboratory study was conducted for test method D381 to establish a precision statement that is applicable to modern gasoline',s which contain can contain oxygenated compounds and are required to contain deposit control additives.
27/9/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:E15-1057
An interlaboratory study was conducted by a single laboratory testing a 1-ton cylinder of liquid chlorine to establish a precision statement for test method E2037. The average concentration of bromine chloride by this method was 129 ppm. One analyst performed two to six analyses on each of seven days for a total of 24 determinations.
27/9/1999 - PDF - Inglés - ASTM
Más información50,40 € -
ASTM Research Report RR:E15-1058
An interlaboratory study was conducted by a single laboratory testing a one-ton cylinder of liquid chlorine containing approximately 0.2. ppm nitrogen trichloride to establish a precision statement for test method E2036.
27/9/1999 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1462
This report describes an interlaboratory study for test method D5800 to establish precision for Procedure C Selby-Noack Volatility Test.
3/9/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1463
This report describes an interlaboratory study was carried out to establish a precision statement for test method D6468.
3/9/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1464
An interlaboratory study was conducted by ten laboratories and used three pure chemicals, one pure hydrocarbon, three fuels and three lubricating oils to establish a precision statement for test method D6450.
3/9/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1459
An interlaboratory study was conducted for test method D5293 to establish precision with CCS-2B (manual) over the temperature range from -5 to -30 degree C and viscosity range from 1560 to 10,200 mPa(s).
13/8/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1460
This report describes an interlaboratory study for D6481 to establish precision for the determination of phosphorus, sulfur, calcium and zinc in lubricating oils by EDXRF.
13/8/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D04-1016
An interlaboratory study was conducted by ten laboratories testing three materials which ranged from approximately 92 to 99 % NaCl to establish a precision statement the rapid method for chemical analysis of sodium chloride found in standard specification D632.
29/7/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1457
An interlaboratory study was conducted to establish the reproducibility of ?O.N.-bar values for n = 5 in test method D2885.
28/7/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1456
This research report describes an interlaboratory study to establish precision for test method D5453 for UVF/X-ray equivalence.
23/7/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C09-1022
An interlaboratory study was performed by fifteen volunteer technicians to establish a precision statement for test method C143/C143M.
20/7/1999 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D04-1015
An interlaboratory study was conducted by six laboratories to establish a precision statement for the edge coverage test in the standard specification D3963/D3963M.
20/7/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F06-1005
An interlaboratory study was conducted by six laboratories testing seven samples to establish a precision statement for test method F970.
20/7/1999 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D01-1109
An interlaboratory study of the viscosity of a standard oil at one temperature and the melt viscosity of three resins each at 2 different temperatures was run by 10 laboratories for D6267.
9/7/1999 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:F11-1012
An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method F558.
6/7/1999 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D01-1112
An interlaboratory study of the Mettler cup and ball softening point of three hydrocarbon resins was conducted in 1998, in accordance with Practice E 691, by 10 laboratories.
9/6/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1113
An interlaboratory study of the ring and ball-softening point of rosin and three resins was run in by 9 laboratories for E28.
9/6/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D04-1014
A journal entry on an interlaboratory study that was conducted by twelve laboratories testing an asphalt mixture to establish a precision statement for test method D5581.
9/6/1999 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1451
Research report D02-1451 describes an interlaboratory study for test method D6417 to establish precision for results between 1.8 and 19.8 % of volatility at 371 degree C.
4/6/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1454
This report describes an interlaboratory study to establish precision for test method D6425.
4/6/1999 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1455
This report describes an interlaboratory study that shows how suspended water in hazy samples in Groups 1 and 2 can be removed by the addition of anhydrous sodium sulfate and separating the liquid sample from the drying agent by decanting without statistically affecting the results of the test for test method D86.
26/5/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D13-1103
An interlaboratory study was conducted by six laboratories testing three materials to establish a precision statement for test method D5344.
11/5/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1111
An interlaboratory study was conducted by seven laboratories testing nine materials to establish a precision statement for test method D6387.
16/4/1999 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D13-1102
An intralaboratory study was conducted by a laboratory testing seven flame resistant woven fabrics to establish a precision statement for test method D6413.
16/4/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1026
An interlaboratory study performed by seven laboratories which tested four materials to establish the precision statement of test method D5776.
16/4/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D30-1001
An interlaboratory study was conducted by nine laboratories testing three materials to establish a precision statement for test method D5528.
14/4/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D04-1013
An Inter-Laboratory Study was conducted to establish precision statements for ASTM D6390, Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures.
4/4/1999 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:F02-1012
An interlaboratory study was conducted by two laboratories testing four materials to establish a precision statement for test method F1927.
24/3/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1450
The precision of the test method D6443 was determined by statistical analysis of an interlaboratory study. In this study, nine laboratories analyzed eleven oils and three additives in duplicate.
3/3/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1452
An interlaboratory study was conducted for test method D6371, a re-analysis of data collected in a 1988 interlaboratory study to present a precision statement for the practice of testing diesel fuels and heating oils for cold filter plugging point.
3/3/1999 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D13-1101
An interlaboratory study was conducted by four laboratories testing five materials to establish a precision statement for test method D5736.
3/3/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:F08-1005
An interlaboratory study was conducted by nine laboratories which tested six materials to establish the precision statement of test method F1647.
4/2/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1448
An interlaboratory study to establish a precision and bias statement for the Gelation Index and the Gelation Index Temperature in test method D5133.
26/1/1999 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:E01-1027
An interlaboratory study was conducted by seven laboratories which tested twelve materials to establish the precision statement of test method E1999.
25/1/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:F07-1005
An interlaboratory study was conducted by six laboratories which tested four materials to establish the precision statement of test method F1863.
25/1/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:C14-1001
An interlaboratory study on a study of the precision of ASTM C-429. Fifteen laboratories performed dry sieve analysis on six commonly used glass melting sands.
22/1/1999 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:C09-1018
Ten laboratories participated in an interlaboratory study to evaluate the precision of the test method C1399.
19/1/1999 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1446
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for test method D6379.
19/1/1999 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1447
An interlaboratory study was conducted by twelve laboratories testing four oil samples and four fully formulated lubricant samples to establish a precision statement for test method D6375.
19/1/1999 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D11-1089
An interlaboratory study was conducted by thirteen laboratories testing three materials containing 35% carbon black to establish a precision statement for test method D6370.
19/1/1999 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1444
An interlaboratory study was conducted by laboratories analyzing thirteen sample sets to establish a precision statement for test method D2500. The sample sets were comprised of various distillate fuels and lubricating oils with temperature range from -1 to -37�,C.
30/12/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1025
An interlaboratory study was conducted by fourteen laboratories testing five samples to establish a precision statement for test method D6563.
30/12/1998 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1443
An interlaboratory study for test method D5968 to establish precision for oil temperatures in diesel engines at 135 degrees C.
24/11/1998 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D05-1023
An interlaboratory study was conducted by eight laboratories testing ten carbon samples to establish a precision statement for test method D6316.
24/11/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D20-1203
An interlaboratory study was conducted by six laboratories testing five materials to establish a precision statement for test method D2843.
13/10/1998 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D35-1005
An interlaboratory study was conducted by ten laboratories which tested two materials to establish the precision statement of test method D5993.
13/10/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D16-1024
An interlaboratory study performed by fourteen laboratories which tested six materials to establish the precision statement of test method D6069.
3/10/1998 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:E01-1023
An interlaboratory study was conducted by eight laboratories which tested 10 materials to establish the precision statement of test method E1915.
28/9/1998 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:F08-1004
An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method F1720.
28/9/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1436
This research report describes an interlaboratory study for test method D6304 to establish the precision of determination of water in liquid petroleum products using coulometric Karl Fischer titration procedure.
11/9/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D20-1202
An interlaboratory study was conducted by fifteen laboratories testing four materials to establish a precision statement for test method D648.
11/9/1998 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:E15-1053
An interlaboratory study was conducted by seven laboratories testing one sample of chlorothiophene to establish a precision statement for test method E256.
11/9/1998 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D11-1087
An interlaboratory study was conducted by seven laboratories to establish a precision statement for test method D3484.
1/9/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1431
An interlaboratory study using each of the procedures (filter instruments, FTIR instruments with PLS calibration, and FTIR instruments with CLS calibration) for test method D6277 was conducted to establish a precision statement.
24/8/1998 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D02-1458
An interlaboratory study was conducted for test method D6470 to establish precision by testing 3 desalted crude oils, neat and spiked with two standard salt solutions, at three different concentrations up to a level of 0.14% NaCl on crude.
13/8/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E01-1025
An interlaboratory study was conducted by eleven laboratories which tested four materials to establish the precision statement of test method E1938.
11/8/1998 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1432
An interlaboratory study for test method D6293 was conducted by five laboratories testing thirty-five samples to establish precision statements.
5/8/1998 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1434
An interlaboratory study for test method D1264 to update the precision statement on greases.
5/8/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D35-1004
An interlaboratory study was conducted by ten laboratories which tested three materials to establish the precision statement of test method D5887.
5/8/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E15-1052
An interlaboratory study was conducted by ten laboratories testing five samples to establish a precision statement for the test methods in E534.
5/8/1998 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:C16-1023
An interlaboratory study was conducted by three laboratories, testing two materials to establish a precision statement for Test Method C1374, Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation.
4/8/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C09-1017
Research report C09-1017 describes an interlaboratory study to determine the within-laboratory precision of the length change method of determining freeze-thaw resistance of beams subjected to rapid freezing and thawing, and establish precision statements for C666.
29/7/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E33-1008
An interlaboratory study was conducted by ten laboratories which tested the same 2 noise sources in a room using the same instruments to establish the precision statement of test method E1574.
21/7/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F07-1004
An interlaboratory study was conducted by six laboratories which tested four materials to establish the precision statement of test method F1863.
21/7/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1428
An interlaboratory study which covered a set of 21 gasolines excluding M-85 and M-100 to establish a precision statement for Case II in test method D2622.
9/7/1998 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:E15-1051
An interlaboratory study was conducted by one laboratory which tested four materials to establish the precision statement of test method E538.
9/7/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1426
An interlaboratory study was conducted by six laboratories testing nine oil samples to establish a precision statement for test method D6278.
25/6/1998 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D05-1022
An interlaboratory study was conducted by seven laboratories testing six cokes to establish a precision statement for test method D5341.
24/6/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:B09-1009
The following precision data were developed using the procedures contained in Test Method E 194, standard test method for acid-insoluble content of copper and iron powders, from an interlaboratory study that performed six sets of tests.
15/6/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1433
An interlaboratory study for test method D6296 conducted by six laboratories to calculate a precision statement.
12/6/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:G01-1020
An interlaboratory study was conducted by ten laboratories which tested four grades of stainless steels to determine their Critical Pitting Temperatures and establish the precision statement of test method G150.
12/6/1998 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D20-1201
An interlaboratory study was conducted by seven laboratories testing three materials to establish a precision statement for test method D1621.
29/5/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D19-1162
An interlaboratory study was conducted by nine laboratories testing samples which were prepared by dispersing a specially prepared dry powder in approximately 350mL of distilled water so that a precision statement could be established for test method D3977.
27/5/1998 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D19-1163
An interlaboratory study was conducted by ten laboratories which tested ten materials to establish the precision statement of test method D5997.
27/5/1998 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:C08-1013
An interlaboratory study was run in which randomly drawn test specimens of two materials (tabular alumina and Mucosa 47) were tested for true specific gravity by gas comparison pycnometer to establish precision statements for test method C604.
2/4/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1108
An interlaboratory study performed by six laboratories on five samples to determine the precision values of Color Samples with Pt-Co Color less than 25 in D1209.
2/4/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1421
An interlaboratory study for test method D445 was conducted to determine the precision of manual and automatic instruments in measuring kinematic viscosity at 100 degrees C of high viscosity lube additive samples.
25/2/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1420
An interlaboratory study was conducted for D445 to determine the precision of the determination of kinematic viscosity of jet fuels by D445 at -20 degree C.
23/2/1998 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1422
An interlaboratory study for test method D445 to determine the precision of manual and automatic viscometers in measuring the viscosity range from 1.5 to 12 mm squared/s at 40 degrees C.
23/2/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E37-1023
An interlaboratory study was conducted by eight laboratories which tested two materials to establish the precision statement of test method E1719.
23/2/1998 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1419
An interlaboratory study for test method D6217 was conducted by thirteen laboratories which tested nine test fuels to establish precision.
11/2/1998 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:E01-1022
An interlaboratory study was conducted by twelve laboratories which tested 19 materials to establish the precision statement of test method E415.
11/2/1998 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:F07-1003
An interlaboratory study was conducted by twenty laboratories which tested five materials to establish the precision statement of test method F1165.
3/2/1998 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D20-1200
An interlaboratory study was conducted by seven laboratories testing six polyethylene resins to establish a precision statement for test method D1693.
28/1/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D14-1007
An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method D6195.
14/1/1998 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F23-1003
An interlaboratory study was conducted by six laboratories which tested five randomly drawn samples to establish the precision statement of test method F1819.
14/1/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1445
This research report describes an interlaboratory study for test method D6352 to develop precision statements by testing done on eight samples which were analyzed on three different column liquid phases.
7/1/1998 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F17-1043
An interlaboratory study was conducted by seven laboratories testing ten samples to establish a precision statement for test method F1473.
30/11/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1519
An interlaboratory study was conducted by ten laboratories testing ten samples to establish a precision statement for test method D6729.
20/11/1997 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:F01-1014
An interlaboratory study was conducted by six laboratories testing nine samples to establish a precision statement for test method F996.
17/11/1997 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:G02-1010
Research report G02-1010 describes two interlaboratory studies testing the response of materials to reciprocating sliding motions, one involving dry sliding, and the other involving sliding lubricated with hot mineral oil, in order to establish a precision statement for test method G133.
17/11/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1106
An interlaboratory study was conducted by fifteen laboratories testing three samples to establish a precision and bias statement for test method D6166.
11/11/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1021
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method E1917.
7/11/1997 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D12-1012
An interlaboratory study was conducted by seven laboratories testing seven materials to establish a precision statement for test method D6173.
4/11/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D13-1098
Two interlaboratory studies were conducted to establish precision statements for D5363. ILS A was conducted by five laboratories testing 2 woven fabrics and 3 knit fabrics to determine if significant interlaboratory differences existed when using the BBTM and to determine if the BBTM could separate the fabrics into several different groups or classes. ILS B was conducted by four laboratories testing two fabric samples to determine if significant interlaboratory differences did exist.
27/10/1997 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1414
An interlaboratory study was conducted by nine laboratories testing twelve samples to establish a precision statement for test method D6120.
2/9/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1413
An interlaboratory study was conducted by ten laboratories testing ten liquid waste samples to establish a precision statement for test method D6160.
29/8/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1084
An interlaboratory study was conducted to establish precision statements for ASTM D6147, Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer- Determination of Force Decay (Stress Relaxation) in Compression.
5/8/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:C16-1022
An interlaboratory study was conducted by seven companies testing material from a production run of one product. Each received approximately 1000 pounds of product. A series of three tests were conducted at different weights persq.ft. (.575, 1.150, 1.575). Each weight was blown and measured immediately after three times, and an average thickness was determined to establish a precision statement for Test Method C1374.
1/8/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1520
An interlaboratory study was conducted by 21 laboratories testing samples to establish a precision statement for test method D6733.
1/8/1997 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:E37-1021
An interlaboratory study was conducted in 1988-89 by nine laboratories testing powdered poly(tetrafluoroethylene) using thermogravimetric analyzers to establish a precision statement for test method E1641.
31/7/1997 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1411
An interlaboratory study was conducted by fifteen laboratories testing nine fuel samples to establish a precision statement for test methods D6078 and D6079.
29/7/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1412
An interlaboratory study was conducted by seven laboratories testing fourteen hydrocarbon impurities in ethylene samples to establish a precision statement for test method D6159.
29/7/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1021
An interlaboratory study was conducted by seven laboratories testing three phenol samples to establish a precision statement for test method D6142.
29/7/1997 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D16-1022
An interlaboratory study was conducted by six laboratories testing a single sample to establish a precision statement for test method D6144.
29/7/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1081
An interlaboratory study was conducted by three laboratories testing five materials to establish a precision statement for test method D6047.
25/7/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E15-1050
An interlaboratory study was conducted by eight laboratories testing hydroxylated compounds to establish a precision statement for test method E1899.
17/7/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1449
An interlaboratory study was conducted by thirteen laboratories testing six lubricating oil samples to establish a precision statement for test method D2711.
3/7/1997 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:F11-1011
An interlaboratory study was conducted by ten laboratories testing carpet cleaners to establish a precision statement for test method F1334.
3/7/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1410
An interlaboratory study was conducted by eighteen laboratories testing eight grease samples to establish a precision statement for test method D5706 and D5707.
2/7/1997 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D11-1079
An interlaboratory study was conducted by sixteen laboratories testing five rubber samples to establish a precision statement for test method D5963.
24/6/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D10-1011
An interlaboratory study was conducted by six laboratories testing resonant responses of a blower to establish a precision statement for test method D3580.
3/6/1997 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:F11-1010
An interlaboratory study was conducted by nine laboratories testing carpet cleaners to establish a precision statement for test method F608.
9/5/1997 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D20-1193
An interlaboratory study was conducted by eleven laboratories testing two materials to establish a precision statement for test method D6042.
6/5/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D20-1198
An interlaboratory study was conducted by thirteen laboratories testing three materials to establish a precision statement for the standard specification D1056.
1/5/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1008
An interlaboratory study was conducted by six laboratories, testing three coatings to establish a precision statement for Test Method D3359 Procedures A &, B.
29/4/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D10-1010
An interlaboratory study was conducted by nine laboratories testing 90 samples, ten of each nine strap materials to establish a precision statement for specification D3950.
26/4/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D11-1083
An interlaboratory study was conducted by six laboratories testing two materials to establish a precision statement for test methods D5044 and D5051.
24/4/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1409
An interlaboratory study was conducted by fifteen laboratories testing eight samples to establish a precision statement for test method D2272.
22/4/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D10-1009
An interlaboratory study was conducted by ten laboratories testing three materials to establish a precision statement for specification D3953.
22/4/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D19-1157
An interlaboratory study was conducted by thirteen laboratories tested 21-32 sample spike solutions to establish a precision statement for test method D5673.
15/4/1997 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D19-1156
An interlaboratory study was conducted by seven laboratories testing four carbon samples to establish a precision statement for test method D5904.
1/4/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D30-1003
Four laboratories participated in the ruggedness testing portion of this investigation. The ASTM D 3039 Tensile Test method was used to test four composite materials including a glass/epoxy uni-tape, carbon/toughened epoxy uni-tape, aramid/epoxy fabric and a glass/epoxy uni-tape which is believed to be strain rate sensitive. These materials were tested at a variety of different lay-ups and specimen configurations to accomplish the stated objectives. Laboratories were requested to provide failure strength, failure strain and chord modulus data for each of the specimens tested by their facility. The interlaboratory study portion of this investigation was conducted using the ASTM D3039 Tensile Test method on six composite materials in a variety of lay-up configurations. The materials tested included: IM-6/3501-6 uni-tape, glass/epoxy uni-tape, carbon/toughened epoxy fabric, Toray carbon/epoxy uni-tape, Toho carbon/epoxy uni-tape and glass/polypropylene unitape. An average of five replicates per test condition were tested by the participating laboratories. The number of participating test laboratories ranged from five to nine depending on the material type. Laboratories were requested to provide failure strength, failure strain, chord modulus and failure mode for each of the specimens tested at their facility. Laboratories were requested to provide failure strength, failure strain and chord modulus data for each of the specimens test by their facility.
1/4/1997 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:E37-1018
An interlaboratory study was conducted by ten laboratories testing two samples to establish a precision statement for test method E1858.
26/3/1997 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:E37-1019
An interlaboratory study was conducted by nine laboratories comparing the thermal analyzer clock to a traceable secondary reference time piece of accuracy to establish a precision statement for test method E1860.
26/3/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1408
An interlaboratory study was conducted by seven laboratories testing ten samples to establish a precision statement for specification D4171.
25/3/1997 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D20-1195
An interlaboratory study was conducted by ten laboratories testing two samples to establish a precision statement for test method D6099.
25/3/1997 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D16-1020
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test methods D2360 and D5917.
12/3/1997 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:C09-1012
An interlaboratory study was conducted by eleven laboratories testing four concrete samples to establish a precision statement for test method C1084.
5/3/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D19-1155
An interlaboratory study was conducted by sixteen analysts in nine laboratories testing five samples to establish a precision statement for test method D5916.
9/2/1997 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D05-1020
An interlaboratory study was conducted by twelve laboratories testing twelve coal samples to establish a precision statement for test methods D5865, D3173, D3174 and D4239.
5/2/1997 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D06-1003
An interlaboratory study was conducted in June/July 1996 by twenty laboratories testing six grades of materials to establish a precision statement for D5725.
5/2/1997 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1406
An interlaboratory study was conducted by 27 laboratories testing nine samples to establish a precision statement for test method D2887.
24/1/1997 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D11-1082
An interlaboratory study was conducted by six laboratories testing six polymer grade samples to establish a precision statement for test method D6049.
14/1/1997 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D15-1019
An interlaboratory study was conducted by twelve laboratories testing six samples to establish a precision statement for test method D5828.
8/1/1997 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1404
An interlaboratory study was conducted by thirteen laboratories testing six samples to establish a precision statement for test method D4684.
6/1/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D05-1035
An interlaboratory study was conducted by fourteen laboratories which tested fifteen materials to establish the precision and bias statement of test method D6349.
1/1/1997 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D19-1160
An interlaboratory study was conducted by seventeen laboratories testing six samples to establish a precision statement for test method D6071.
27/12/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E28-1016
An interlaboratory study was conducted by eight laboratories testing two steel materials to establish a precision statement for test method E517.
27/12/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1018
An interlaboratory study was conducted by seventeen laboratories testing seven samples to establish a precision statement for test method E1852.
17/12/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1017
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method E1834.
9/12/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1019
An interlaboratory study was conducted by testing the procedure of analysis of Nickel Alloys by flame atomic absorption spectrometry for a series of 8 elements to establish a precision statement for test method E1835.
9/12/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E37-1017
An interlaboratory study was conducted by six laboratories testing samples to establish a precision statement for test method E1582.
8/11/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1403
An interlaboratory study was conducted by eleven laboratories testing five samples to establish a precision statement for test method D5763.
4/11/1996 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:E01-1020
An interlaboratory study was conducted by thirty-one laboratories testing eight samples to establish a precision statement for test method E1898.
4/11/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C28-1001
An interlaboratory study was conducted by three individuals testing three machines to establish a precision statement for test method C1161.
24/9/1996 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:C28-1002
An interlaboratory study was conducted by seventeen laboratories to develop precision statements for ASTM test method C1322.
24/9/1996 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:C28-1003
An interlaboratory study was conducted by eleven laboratories testing samples of steel, Tungsten Carbide, and Silicon Nitride to establish a precision statement for test method C1326.
24/9/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F01-1013
An interlaboratory study was conducted by eight laboratories testing three materials to establish a precision statement for test method F1593.
29/8/1996 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D24-1030
An interlaboratory study was conducted by eight laboratories testing four materials to establish a precision statement for test method D3191.
26/8/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D24-1031
An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for test method D3192.
26/8/1996 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:C28-1000
An interlaboratory study was conducted by eight laboratories testing four advanced ceramic samples to establish a precision statement for test method C1259.
19/8/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1101
An interlaboratory study was conducted by nine laboratories testing three samples to establish a precision and bias statement for test method D5974.
15/8/1996 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D20-1190
An interlaboratory study was conducted by seven laboratories testing a polyisocyanurate and a polystyrene sample to establish a precision statement for test method D2842.
9/8/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D19-1174
An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method D6239.
12/7/1996 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:F07-1002
An interlaboratory study was conducted by three laboratories testing for windscreen positioning and angular deviation to establish a precision statement for test method F801.
2/7/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:G04-1001
An interlaboratory study was conducted by six laboratories testing three cleaning materials to establish a precision statement for test method G122.
1/7/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1102
An interlaboratory study was conducted by seventeen laboratories testing three samples to establish a precision and bias statement for test method D1065.
21/6/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F08-1003
An interlaboratory study was conducted by six laboratories testing six samples to establish a precision statement for test method F1702.
12/6/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:G02-1008
An interlaboratory study was conducted by forty laboratories testing samples to establish a precision statement for steel versus steel ball wear scar diameter results and steel versus steel ball friction results in test method G99.
4/6/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1391
There are two laboratory tests available for the determination of High Temperature Deposits. The tests are the Thermo-Oxidation Engine Oil Simulation Test (TEOST) and the Hot Tube Test (HTT). This report describes three interlaboratory studies that were conducted to determine the precision of the methods. The first study is a preliminary (first) round robin held in February 1995, on the TEOST. Three reference oils were analyzed by seven participating laboratories. The second study is a full (second) round robin on the TEOST held in June 1995. Nine laboratories participated by analyzing seven reference oils. The third study in this report is a round robin on the HTT. The same seven reference oils used in the second TEOST round robin were analyzed by ten participating laboratories.
3/6/1996 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D02-1388
An interlaboratory study was conducted by sixteen laboratories testing thirteen samples to establish a precision statement for test method D5186.
30/5/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D34-1011
An interlaboratory study was conducted by eight participants testing a sand and an organic soil spiked with various concentrations of diesel fuel to establish a precision statement for test method D5831.
21/5/1996 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1387
An interlaboratory study was conducted by thirteen laboratories testing four hydrocarbon samples to establish a precision statement for test method D4052.
20/5/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E15-1048
An interlaboratory study was conducted by eight laboratories testing a single sample of acrylonitrile to establish a precision statement for test method E1784.
15/5/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E15-1049
An interlaboratory study was conducted by seven laboratories testing two samples of acrylonitrile to establish a precision statement for test method E1788.
15/5/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D05-1019
An Interlaboratory Study was conducted to establish precision statements for ASTM D5515, Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer.
9/5/1996 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D20-1188
An interlaboratory study was conducted by seven laboratories testing polyamide 66 material to establish a precision statement for test method D3801.
7/5/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D35-1003
An interlaboratory study was conducted by nine laboratories testing four samples to establish a precision statement for test method D5885.
17/4/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E15-1045
An interlaboratory study was conducted by a single laboratory testing three streams of liquid chlorine to establish a precision statement for test method E1786.
12/4/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D28-1005
An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D2854.
8/4/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E15-1044
An interlaboratory study was conducted by nine laboratories testing one sample of di-tert-butyl-peroxide to establish the precision statement for test method E475.
22/3/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1385
An interlaboratory study was conducted by thirty-five laboratories testing fourteen samples to establish a precision statement for test methods D5091, D4305, and D5972.
20/3/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F06-1003
An interlaboratory study was conducted by six laboratories testing three categories of unprinted resilient sheet flooring which contained low, medium and high levels of stabilizers to establish precision statements for test methods F1515 and F1514.
18/3/1996 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1384
An interlaboratory study was conducted by five laboratories testing nine fuel samples to establish a precision statement for test method D5452.
8/3/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1405
An interlaboratory study was conducted by a single laboratory testing a single sample containing a nominal sulfur concentration of 0.2 ppm to establish a precision statement for test method D4045.
29/2/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1382
An interlaboratory study was conducted by six laboratories testing samples to establish a precision statement for test method D5769.
16/2/1996 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D20-1192
An interlaboratory study was conducted by ten laboratories testing nine samples to establish a precision statement for test method D5017. An earlier round robin, conducted by ten laboratories testing six samples is also included in this report.
13/2/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1078
This report describes an interlaboratory study to establish precision statements for ASTM D5902. A test program was completed to measure the residual unsaturation in HNBR by iodine number and infrared spectrophotometry. This report deals with the iodine number approach only. Seven laboratories tested three different HNBR samples with unsaturation levels of <1%, approximately 2% and approximately 5% were used. The iodine results were measured in duplicate on two difference days.
7/2/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D11-1080
An interlaboratory study was conducted to establish precision statements for ASTM D3403, Standard Test Methods for Rubber- Evaluation of IR (Isoprene Rubber).
5/2/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1379
An interlaboratory study was conducted by one laboratory testing oil samples to establish a precision statement for test method D4485.
29/1/1996 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1103
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test method D6038.
22/1/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C24-1053
An interlaboratory study was conducted by four laboratories testing three samples to establish a precision statement for test method C1501.
18/1/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1096
An interlaboratory study was conducted by five laboratories testing five samples to establish a precision statement for test method D4017.
11/1/1996 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D01-1097
An interlaboratory study was conducted by five laboratories testing three ink samples to establish a precision and bias statement for test method D5909.
11/1/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F23-1002
An interlaboratory study was conducted by six laboratories testing nine samples to establish a precision statement for test method F1670 and F1671.
9/1/1996 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1378
An interlaboratory study was conducted by eight laboratories testing thirteen oil samples to establish a precision statement for test method D5481, D4683, and D4741.
5/1/1996 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D04-1012
An interlaboratory study was conducted by twelve laboratories testing samples of aggregate and asphalt cement to establish a precision statement for test method D5581.
1/1/1996 - PDF - Inglés - ASTM
Más información56,70 €