Informe USA
-
ASTM Research Report RR:D20-1111
An interlaboratory study was conducted by five laboratories testing resin and nitrile rubber samples to establish a precision statement for test method D4322.
12/12/1983 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D20-1109
An interlaboratory study was conducted by seven laboratories testing four samples to establish a precision statement for test method D747.
11/10/1983 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D20-1103
A round robin study has been conducted to formulate a precision and accuracy statement for the proposed new method ",Package Yield of Film",. These results include data from six laboratories. In the study four materials (polyethylene 0.0025", nominal thickness, polypropylene 0.001", nominal thickness, polyester 0.0005", nominal thickness, and polyester 0.002", nominal thickness were used. Two methods of sample preparation were used in the round. The details are listed in the attached protocol. Differences in the reported values do not appear to be related to sampling method (straight edge versus template). Use of the two methods of sample preparation resulted in ten data sets.
11/10/1983 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1034
An interlaboratory study was conducted by five laboratories testing paint samples to establish a precision statement for test method D4145.
10/10/1983 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D20-1108
An interlaboratory study was conducted by eight laboratories testing six polyol samples to establish a precision statement for test method D4273.
23/9/1983 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1024
An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for test method D1415.
8/9/1983 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D19-1099
An interlaboratory study was conducted by twelve operators in nine laboratories testing samples in four levels of concentration added to both reagent water and matrix water of their choice to establish a precision statement for test method D4193.
8/9/1983 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1166
An interlaboratory study was conducted by six laboratories testing petroleum coke samples to establish a precision statement for test method D4292.
25/7/1983 - PDF - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D20-1105
An interlaboratory study was conducted by five laboratories testing four samples to establish a precision statement for test method D1622.
15/6/1983 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1091
An interlaboratory study was conducted by nine laboratories testing five alloy samples to establish a precision statement for test method E350.
10/5/1983 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D01-1033
An interlaboratory study was conducted by fourteen laboratories testing three methanol samples to establish a precision statement for test method D1363.
29/4/1983 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D20-1101
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision and bias statement for test method D882.
13/4/1983 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D05-1005
An interlaboratory study was conducted by six laboratories testing seven coal samples to establish a precision statement for test method D4208.
28/2/1983 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:G04-1000
This research report records the pertinent test data which resulted from an interlaboratory testing program conducted to assess the reproducibility of a given oxygen mechanical impact tester and among different testers of different designs. These testers constituted all the known tester facilities available at the time the round robin study was conducted. This research report acts as supporting data for test method G86.
12/1/1983 - PDF - Inglés - ASTM
Más información63,00 € -
102,00 €
-
102,00 €
-
ASTM Research Report RR:D32-1004
Supporting Data for ASTM D4179, Test for Single Pellet Crush Strength of Formed Catalyst Shapes
25/10/1982 - PDF - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1160
An interlaboratory study was conducted by eight laboratories testing seven kerosene samples to establish a precision statement for test method D187.
29/6/1982 - PDF - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1150
A round robin was conducted by seven laboratories to establish supporting data for ASTM D2893.
10/5/1982 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1088
Interlaboratory Study to Establish Precision Statements for ASTM E478, Standard Test Methods for Chemical Analysis of Copper Alloys
17/3/1982 - PDF - Inglés - ASTM
Más información50,40 € -
ASTM Research Report RR:E01-1077
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
5/2/1982 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1087
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
5/2/1982 - PDF - Inglés - ASTM
Más información50,40 € -
ASTM Research Report RR:D11-1021
An interlaboratory study was conducted to establish precision statements for ASTM D3900, Methods for Rubber, Raw Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers).
4/2/1982 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D11-1019
An Interlaboratory Study was conducted to establish precision statements for ASTM D4075, Test for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals.
20/8/1981 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D09-1009
An interlaboratory test program was conducted to determine the precision that would result from the use of a test method for the bondability of insulated wire to potting compounds. This test method is for inclusion in ASTM D3032 on Hookup Wire Insulation. A joint test program was carried out with members of ASTM D9 Subcommittee 16 and the A-2H Committee of the Society of Automotive Engineers participating in specimen preparation and test. Four ASTM members and three A-2H members participated in the program.
22/7/1981 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1135
An interlaboratory study was conducted by fourteen laboratories testing two sample blends across three series to establish a precision statement for test method D2670.
18/6/1981 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D09-1007
Research Report D09-1007 contains supporting data for ASTM D1676, Testing Film-Insulated Magnet Wire.
7/4/1981 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D09-1007
Research Report D09-1007 contains supporting data for ASTM D1676, Testing Film-Insulated Magnet Wire.
1/4/1981 - - - ASTM
Más informaciónDe: 81,90 € -
102,00 €
-
ASTM Research Report RR:D01-1026
An interlaboratory study was conducted by fifteen laboratories testing fifteen samples to establish a precision statement for test method D2369.
16/12/1980 - PDF - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D20-1084
An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D882.
1/10/1980 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E01-1083
Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
27/8/1980 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1084
Interlaboratory Study to Establish Precision Statements for ASTM E353, Standard Test Methods for Chemical Analysis of Stainless, Heat- Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
27/8/1980 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1133
An interlaboratory study was conducted by five laboratories testing ten samples to establish a precision statement for test method D3944.
26/8/1980 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1074
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
9/1/1980 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D01-1020
Interlaboratory Study to Establish Precision Statements for ASTM D1614, Test for Alkalinity in Acetone
21/5/1979 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1108
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D3342.
25/4/1979 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1016
Interlaboratory Study to Establish Precision Statements for ASTM D3125, Test for Methyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters
20/10/1978 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1070
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
8/9/1978 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1054
An interlaboratory study was conducted to establish a precision statement for ASTM D3702. There were 5 labs with 4 tests each in Round Robin No. 1, 6 labs with 2 tests each in Round Robins No. 2a and 2b, and 2 labs with 6 tests each n Round Robin No. 3. Tests marked with * were used in calculations.
18/8/1978 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1056
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D3705.
18/8/1978 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1014
An interlaboratory study was conducted by seven laboratories testing five samples to establish a precision statement for test method D3427.
31/1/1978 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1067
Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
21/10/1977 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E05-1002
An interlaboratory study was conducted by twenty one laboratories testing fifteen samples to establish a precision statement for test method E662.
3/10/1977 - PDF - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:C08-1004
The data analyzed in this report was collected in 1971 as part of a Round-Robin study of the test method C863 by five different laboratories, which tested three samples each of five different materials. The variable measured is percent volume expansion. The test temperature was 1100 degrees Celsius.
19/7/1977 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D20-1064
An interlaboratory study was conducted by three laboratories testing three materials to establish a precision statement for test method D570.
19/7/1977 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1012
An Interlaboratory Study was conducted to establish precision statements for ASTM D3616, Test for Rubber, Raw - Determination of Gel, Swelling Index, and Dilute Solution Viscosity.
6/7/1977 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1036
An interlaboratory study was conducted by six laboratories testing fifteen samples to establish a precision statement for test method D3120.
15/2/1977 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1026
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method D943.
24/8/1976 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1066
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
4/8/1976 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1013
An interlaboratory study was conducted by five laboratories testing seven samples to establish a precision statement for test method D2624. Three Ethyl and two Maihak meters were used to measure the electrical conductivity of each sample.
11/9/1975 - PDF - Inglés - ASTM
Más información81,90 € -
AGARDograph N° 205
Review of Anthropometric Data of German Air Force and United States Air Force Flying Personnel 1967-1968.
Advisory Group for Aerospace Research and Development Paris (France)
1/4/1975 - PDF - Inglés - NTIS
Más información25,00 € -
ASTM Research Report RR:D11-1004
An Interlaboratory Study was conducted to establish precision statements for ASTM D471, Test for Change in Properties of Elastomeric Vulcanizates Resulting from Immersion in Liquids.
22/4/1974 - PDF - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1000
An Interlaboratory Study was conducted to establish precision statements for ASTM D297, Chemical Analysis of Rubber Products (Sulfur).
24/9/1973 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E01-1062
Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
16/10/1972 - PDF - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E15-0028
An interlaboratory study was conducted by seven laboratories which analyzed mixtures of ethylene, diethylene, and triethylene glycols to establish a precision statement for test method D1209.
4/1/1966 - PDF - Inglés - ASTM
Más información115,50 € -
2.295,00 €
-
2.295,00 €
-
2.295,00 €
-
13.500,00 €
-
4.950,00 €
-
8.120,00 €
-
4.950,00 €
-
3.745,00 €
-
4.200,00 €
-
2.495,00 €
-
2.495,00 €
-
1.625,00 €
-
1.825,00 €
-
1.625,00 €
-
1.625,00 €
-
1.900,00 €
-
1.900,00 €
-
1.900,00 €
-
1.900,00 €
-
1.625,00 €
-
1.825,00 €
-
1.475,00 €
-
1.625,00 €
-
1.625,00 €
-
1.900,00 €
-
1.625,00 €
-
1.900,00 €
-
1.825,00 €
-
1.825,00 €
-
1.825,01 €
-
1.475,00 €
-
1.625,00 €
-
1.825,00 €
-
1.475,00 €
-
1.825,00 €
-
1.475,00 €
-
1.625,00 €
-
1.625,00 €
-
1.475,00 €
-
1.475,00 €
-
1.625,00 €
-
1.475,00 €
-
1.475,00 €
-
1.475,00 €
-
1.825,01 €
-
1.825,00 €
-
1.625,00 €
-
1.625,00 €
-
1.825,00 €
-
1.625,00 €
-
1.900,00 €
-
1.825,00 €
-
1.900,00 €
-
1.825,01 €
-
1.900,00 €
-
1.900,00 €
-
1.825,00 €
-
1.475,00 €
-
1.625,00 €
-
1.625,00 €
-
1.900,00 €
-
1.625,00 €
-
1.825,00 €
-
1.625,00 €
-
1.825,00 €
-
1.625,00 €
-
1.625,00 €
-
1.625,00 €
-
2.495,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
450,00 €
-
2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
2.620,00 €
-
2.620,00 €
-
2.620,00 €
-
2.620,00 €
-
2.620,00 €
-
2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €
-
2.620,00 €
-
De: 2.620,00 €
-
De: 2.620,00 €