Informe USA
-
ASTM Research Report RR:D02-1813
A study was conducted to establish that ASTM D1319, with specific adjustments based on results from D86-T95, meets EPA requirements for use as an alternative method the volume percent of aromatics in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1814
A study was conducted to establish that ASTM D5580, with specific adjustments based on results from D86-T95, meets EPA requirements for use as an alternative method to determine the volume percent of aromatics in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1815
A study was conducted to establish that ASTM D5580 meets EPA requirements for use as an alternative method to determine the volume percent of benzene in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1816
A study was conducted to establish that ASTM D5769 meets EPA requirements for use as an alternative method to determine the volume percent of benzene in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1817
A study was conducted to establish that ASTM D6550 meets EPA requirements for use as an alternative method to determine the volume percent of olefins in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1818
A study was conducted to establish that ASTM D6839 meets EPA requirements for use as an alternative method to determine the volume percent of olefins in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1819
A study was conducted to establish that ASTM D4815 meets EPA requirements for use as an alternative method to determine the mass percent of ethanol in gasoline.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1820
This Research Report compiles the relevant information of the four research reports (D02-1780, D02-1787, D02-1788, D02-1790) which descibe the work of the Grand Design ILS. The intent of this report is to consolidate the pertinent information from the other research reports to make it easier for a user of D445 to find all critical precision information in one place.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D20-1264
An intralaboratory study was conducted by one laboratory testing four samples to establish a precision statement for ASTM D8019.
1/12/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:B08-1007
Interlaboratory Study to Establish Precision Statements for ASTM B975-15, Test Method For Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
15/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1122
Interlaboratory Study to Establish Precision Statements for ASTM E415-15, Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
15/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:G02-1015
Interlaboratory Study to Establish Precision Statements for ASTM G204-15, Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
15/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:B08-1008
Interlaboratory Study to Establish Precision Statements for ASTM B636-15, Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D18-1022
Intralaboratory Study to Establish Precision Statements for ASTM D7380- 15, Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:F02-1040
Interlaboratory Study to Establish Precision Statements for ASTM F3039- 15, Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información54,00 € -
ASTM Research Report RR:F11-1022
An interlaboratory study was conducted by eight laboratories testing four samples to establish precision statements for ASTM F2608.Process.
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F17-1053
Interlaboratory Study to Establish Precision Statements for ASTM F2634-15, Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F17-1054
An interlaboratory study was conducted by six laboratories testing one type of valve to establish precision statements for F1802.
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:G01-1027
An interlaboratory study was conducted by six laboratories testing five concrete samples to establish a precision statement for ASTM C876.
1/11/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:C16-1044
An interlaboratory study was conducted by seven laboratories testing five samples to establish precision statements for ASTM C550.
15/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1821
An interlaboratory study was conducted by sixteen laboratories testing ten samples to establish precision statements for ASTM D2983.
15/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E35-1010
Interlaboratory Study to Establish Precision Statements for ASTM E3031-15, Test Method for Determination of antibacterial activity on Ceramic Surfaces
15/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:B09-1023
Interlaboratory Study to Establish Precision Statements for ASTM B797-15, Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
1/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:C16-1043
An interlaboratory study was conducted by six laboratories testing one sample to establish precision statements for ASTM C209.
1/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1806
Interlaboratory Study to Establish Precision Statements for ASTM D7798-15, Test Method for Boiling Range Distribution of Petroleum Distillates With Final Boiling Points up to 538�,C by Ultra Fast Gas Chromatography (UF GC)
1/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D30-1008
Interlaboratory Study to Establish Precision Statements for ASTM D7291/D7291M-15, Through-Thickness Flatwise Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
1/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E28-1045
Interlaboratory Study to Establish Precision Statements for ASTM E2546-15, Standard Practice for Instrumented Indentation Testing
1/10/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D13-1140
Interlaboratory Study to Establish Precision Statements for ASTM D4685-15, Test Method for Pile Fabric Abrasion
1/8/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F40-1005
Interlaboratory Study to Establish Precision Statements for ASTM F2617-15, Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
1/8/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D13-1139
Interlaboratory Study to Establish Precision Statements for ASTM D8007-15, Test Method For Wale and Course Count of Weft Knitted Fabrics
1/7/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1056
Interlaboratory Study to Establish Precision Statements for ASTM D7504-15, Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
1/7/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:E01-1121
Interlaboratory Study for ASTM E1600, Test Method For Determination of Gold in Cyanide Solutions and ASTM D5673, Test Method for Elements in Water by Inductively Coupled Plasma�,Mass Spectrometry
1/7/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:F40-1004
Interlaboratory Study to Establish Precision Statements for ASTM F3078-15, Test Method For Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
1/7/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1804
Interlaboratory Study to Establish Precision Statements for ASTM D3240-15, Test Method for Undissolved Water in Aviation Turbine Fuels
15/6/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D02-1802
An interlaboratory study was conducted by two laboratories testing six samples to establish a precision statement for test method D7918.
1/6/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D11-1111
Interlaboratory Study to Establish Precision Statements for ASTM D3492-15, Specification for Rubber Contraceptives (Male Condoms)
1/6/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D18-1021
Intralaboratory Study to Establish Precision Statements for ASTM D7047-15, Test Method For Swell Volume of Plantago Insularis (Ovat, Psyllium)
1/6/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D19-1193
Interlaboratory Study for ASTM D7237, Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
1/6/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D27-1020
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D7151.
1/5/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:E37-1046
Interlaboratory Study to Establish Precision Statements for ASTM E2603-15, Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
1/5/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F40-1003
Interlaboratory Study to Estab sh Precision Statements for ASTM F3139-15, Test Method For Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
1/5/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E12-1008
An interlaboratory study was conducted by four laboratories testing sixteen samples to establish a precision statement for test method D4449.
1/4/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F02-1038
An interlaboratory study was conducted by ten laboratories testing three samples to establish a precision statement for test method F2981.
1/4/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:F02-1039
An interlaboratory study was conducted by four laboratories testing three samples to establish a precision statement for test method F3136.
1/4/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1053
An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for test method D2121.
15/3/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C08-1025
An interlaboratory study was conducted by twenty-two laboratories testing three samples to establish a precision statement for test method C704.
1/3/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D02-1798
It was hypothesized that blends of T Fuel and n-cetane, which is the D613 primary reference fuel having an assigned cetane number of 100, could be used to extend the rating procedure to cover the cetane number range from the T Fuel ARV to 100. This interlaboratory program was therefore undertaken to investigate the suitability of such blends for this purpose.
1/2/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D16-1055
Interlaboratory Study to Establish Precision Statements for ASTM D5917-15, Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
1/2/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D05-1045
An interlaboratory study was conducted by two laboratories testing five samples to establish a precision statement for test method D720.
1/1/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D35-1021
An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D4632.
1/1/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D35-1022
An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D4533.
1/1/2015 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1787
An interlaboratory study was conducted by forty-one laboratories testing twenty-three samples to establish a precision statement for test method D445.
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1788
An interlaboratory study was conducted to establish the precision of 40 �,C and 100 �,C kinematic viscosity measured using the manual method in D445 for base oils and formulated oils.
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1789
Interlaboratory Study to Determine Suitability of ASTM D445-11a Manual Method for Use with Diesel Fuels, Biodiesel Fuels and Biodiesel Fuel Blends
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1790
An interlaboratory study was conducted by forty laboratories testing seven samples to establish a precision statement for test method D445.
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1795
An interlaboratory study was conducted by twelve laboratories testing twenty-seven samples to establish a precision statement for test method D7861.
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1796
An interlaboratory study was conducted by seventeen laboratories testing twelve samples to establish a precision statement for test method D6423.
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1797
Interlaboratory Study to Establish Precision Statements for ASTM D7945, Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
15/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:C07-1009
An interlaboratory study was conducted by seven laboratories testing eight samples to establish a precision statement for C110-14.
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1791
An interlaboratory study was conducted by twelve laboratories testing eight samples to establish a precision statement for test method D2532.
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1792
Interlaboratory Study to Establish Precision Statements for ASTM D7972-14, Test Method for Three-Point Bend Strength of Carbon and Graphite
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1793
Test Method D7344 for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method) was one of the test methods that also participated in an interlaboratory study to estimate the precision of D1160 Distillation of Petroleum Products at Reduced Pressure when applied to biodiesel FAME (Fatty Acid Methyl Esters). This study ILS #472 is to develop the precision of D7344, and relative bias to D1160 then for D7344 when applied to biodiesel FAME (Fatty Acid Methyl Esters).
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1794
Test Method D7345 for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method) was one of the test methods that also participated in an interlaboratory study to estimate the precision of D1160 Distillation of Petroleum Products at Reduced Pressure when applied to biodiesel FAME (Fatty Acid Methyl Esters) . This study ILS #473 is to develop the precision of D7345, and relative bias to D1160 then for D7345 when applied to biodiesel FAME (Fatty Acid Methyl Esters).
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D16-1054
An intralaboratory study was conducted to Establish Repeatability Statement for ASTM D7977-14, Test Method For Polymer content of AMS (a-Methylstyrene)
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E06-1005
An interlaboratory study was conducted by one laboratory testing fourteen samples to establish a precision statement for test method E2141.
1/12/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D32-1042
An interlaboratory study was conducted by nine laboratories testing two samples to establish a precision statement for test method D7964.
1/11/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:B02-1000
The precision of this test method is based on an interlaboratory study of ASTM B982, Standard Test Method for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis , conducted in 2010. Eleven laboratories participated in this study. Each of the labs was asked to report five replicate test results on a total of four materials. Every �,test result�, reported represents a single determination or measurement. Practice E691 was followed for the design and analysis of the data, the details are given in ASTM Research Report No. B02-1000.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:B02-1001
The precision of this test method is based on an interlaboratory study of ASTM B982- New Specification for Sampling of Lead and Lead Alloys for Optical Emission, conducted in 2010. Each of ten laboratories tested a single material for nine elements. Every ",test result", represents an individual determination, and all participants were asked to report five test results for each element measured. Except for the testing of only a single type of material, Practice E 691 was followed for the study design and analysis of the data, the details are given in ASTM Research Report No. B02-1001.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C09-1045
This research report describes a Ruggedness Study that was conducted by one laboratory to evaluate the influence of seven factors on C39/C39M compressive strength and density values made by C1435/C1435M.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D02-1783
An interlaboratory study was conducted by eight laboratories testing eleven samples to establish a precision statement for test method D7525.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1784
An interlaboratory study was conducted by nine laboratories testing twelve samples to establish a precision statement for test method D6667.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1785
An interlaboratory study was conducted by thirty-four laboratories testing ten samples to establish a precision statement for test method D5800.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1786
An interlaboratory study was conducted by six laboratories testing eight samples to establish a precision statement for test method D3241.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D10-1016
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test method D3103.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D10-1017
An interlaboratory study was conducted by two laboratories testing two samples to establish a precision statement for test method D7860.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D30-1006
An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D7905.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F04-1014
An interlaboratory study was conducted by thirteen laboratories testing one sample to establish a precision statement for test method F2077.
1/10/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:B09-1021
An interlaboratory study was conducted by one laboratory testing two samples to establish a precision statement for test method B931.
1/9/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:B09-1022
An interlaboratory study was conducted by one laboratory testing three samples to establish a precision statement for test method B796.
1/9/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:C08-1024
An interlaboratory study was conducted by five laboratories testing three samples to establish a precision statement for test method C179.
1/9/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D05-1044
An interlaboratory study was conducted by sixteen laboratories testing twenty samples to establish a precision statement for test method D5341.
1/9/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D20-1263
An interlaboratory study was conducted by three laboratories testing six samples to establish a precision statement for test method D7823.
1/8/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D30-1007
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for test method D6641.
1/8/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D35-1019
An interlaboratory study was conducted by five laboratories testing three samples to establish a precision statement for test method D6575.
1/8/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D35-1020
An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method D6525.
1/8/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:G02-1014
Interlaboratory Study to Establish Precision Statements for ASTM G211-14, Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
15/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:C15-1000
An interlaboratory study was conducted by one laboratory testing forty-two samples to establish a precision statement for test method C1781.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C15-1001
An interlaboratory study was conducted by eight laboratories testing eleven samples to establish a precision statement for test method C67.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1779
An interlaboratory study was conducted by eleven laboratories testing eleven samples to establish a precision statement for test method D7946.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1780
An interlaboratory study was conducted by eight laboratories testing seven samples to establish a precision statement for test method D445.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D08-1017
An interlaboratory study was conducted by ten laboratories testing three samples to establish a precision statement for test method D36/D36M.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D16-1051
An interlaboratory study was conducted by five laboratories testing four samples to establish a precision statement for test method D2232.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F23-1010
An interlaboratory study was conducted by one laboratory testing three samples to establish a precision statement for test method F2961.
1/7/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D01-1178
Interlaboratory Study to Establish Precision Statements for ASTM D6886-14, Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
15/6/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:C16-1042
An interlaboratory study was conducted by one laboratory testing three samples to establish a precision statement for test method C1763.
1/5/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D02-1773
An interlaboratory study was conducted by twenty-six laboratories testing twelve samples to establish a precision statement for test method D7042.
1/5/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1778
An Interlaboratory Study was conducted to establish a precision statement for D7111, Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
1/5/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información102,90 € -
ASTM Research Report RR:D05-1043
An interlaboratory study was conducted by twenty-eight laboratories testing six samples to establish a precision statement for test method D7708.
1/5/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F08-1013
An interlaboratory study was conducted by six laboratories testing eighty-four samples to establish a precision statement for test method F1887.
1/5/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:B09-1020
An interlaboratory study was conducted by two laboratories testing three samples to establish a precision statement for test method B527.
1/4/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:C09-1043
A study was conducted by one laboratory to analyze the effects of seven factors on the precision of C1170 and establish a precision statement for the standard. 48 tests were conducted with replicate tests conducted on 24 different RCC mixtures.
1/4/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:C09-1044
An interlaboratory study was conducted by eight laboratories testing two samples to establish a precision statement for test method C567.
1/4/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D31-1021
Interlaboratory Study to Establish Precision Statements for ASTM D6657-2014, Test Method for pH of Wet Blue
1/4/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D31-1022
An interlaboratory study was conducted by nine laboratories testing sixteen samples to establish a precision statement for test method D7674.
1/4/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E06-1004
An interlaboratory study was conducted by one laboratory submitting a total of ten test results for Argon concentration to establish a precision statement for test method E2269.
1/4/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D15-1034
An intralaboratory study was conducted by one laboratory testing five samples to establish a precision statement for D7896.
1/2/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E35-1009
An interlaboratory study was conducted by seven laboratories testing four different materials for four different chemicals (five including isomers) to establish a precision statement for test method E2945.
1/2/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:E54-1000
An interlaboratory study was conducted by eight laboratories that tested two same-model detectors on three separate days using one common analyte (an explosive simulant) distributed at nine different concentrations to establish a precision statement for test method E2677.
1/2/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D22-1035
An interlaboratory study was conducted by twenty laboratories testing four samples to establish a precision statement for test method D7439.
15/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:F11-1021
An interlaboratory study was conducted by three laboratories testing a single type of vacuum cleaner by two different analytical methods to establish a precision statement for test method F2826.
15/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:A05-1005
An interlaboratory study was conducted by eight laboratories testing twenty known NIST samples of varying thicknesses to establish a precision statement for test method A1073.
1/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1176
An interlaboratory study was conducted by ten laboratories testing three different materials using two ink stain types in multiple colors to establish a precision statement for test method D7514.
1/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1177
An interlaboratory study was conducted by eleven laboratories testing five different property types to establish a precision statement for test method D4417.
1/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1770
An interlaboratory study was conducted by sixteen laboratories testing thirteen samples of LPG in duplicate to establish a precision statement for test method D2163.
1/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1772
An interlaboratory study was conducted by two laboratories testing forty-three (39 gasoline, 3 pure compounds and 1 blend of two pure compounds) samples of varying targeted results to establish a precision statement for test method D5188.
1/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D20-1262
An interlaboratory study was conducted by ten laboratories testing three samples of varying targeted results to establish a precision statement for test method D3575.
1/1/2014 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:F02-1035
Interlaboratory Study to Establish Precision Statements for ASTM F2476-13, Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co2TR) Through Barrier Materials Using An Infrared Detector
15/12/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1769
An interlaboratory study was conducted by thirteen laboratories testing 23 samples of varying targeted results to establish a precision statement for test method D7873.
1/12/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D04-1040
An interlaboratory study was conducted by six laboratories. Each of the labs was given 5 SGC pills that would yield 10 test specimens. Each of the labs was instructed to report a minimum of 8 replicate test results for three different test parameters to establish a precision statement for test method D7313.
1/12/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D20-1261
An interlaboratory study was conducted by nine laboratories, testing three materials to establish a precision statement for test method D6576.
15/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F02-1034
Interlaboratory Study to Establish Precision Statements for ASTM F3039-13, Test Method For Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
15/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:A01-1003
An interlaboratory study was conducted by three laboratories testing five samples of varying targeted results to establish a precision statement for test method A1038.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:C16-1041
An interlaboratory study to establish precision statements for C1104 was conducted by six laboratories, testing three types of fiber insulation. Every analyst was instructed to report triplicate test results in this study.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1144
An interlaboratory study was conducted by eight laboratories testing seven samples to establish a precision statement for test method D6132.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1173
An interlaboratory study was conducted by four laboratories testing four paints for porosity to establish a precision statement for test method D6583.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D01-1174
An interlaboratory study was conducted by ten laboratories testing one topcoat and three different primers for enamel holdout to establish precision statements for D7786. Every ",test result", represents an individual determination, and all participants were asked to report five replicate ",test results", for each analysis.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1175
An interlaboratory study was conducted by six laboratories testing eight samples of varying targeted results to establish a precision statement for test method D4446.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D09-1038
An interlaboratory study was conducted by two laboratories testing three samples of commercially available alliance separators varying targeted results to establish a precision statement for test method D7148.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D20-1260
An interlaboratory study was conducted by one laboratory testing six samples of varying targeted results to establish a precision statement for test method D1929.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:E04-1008
An interlaboratory study was conducted by seventeen laboratories testing one material to establish a precision statement for test method E2627.
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:E29-1001
Interlaboratory Study to Establish Precision Statements for ASTM E2427-13, Test Method for Acceptance by Performance Testing for Sieves
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F02-1034
Interlaboratory Study to Establish Precision Statements for ASTM F3039-13, Test Method For Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
1/11/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D05-1046
An interlaboratory study was conducted by eight laboratories testing twenty samples to establish a precision statement for test method D5373.
15/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1767
ASTM D4683-10, Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 degrees C [ILS No. 848] ASTM D5481-10, Test Method for Measuring Apparent Viscosity at High- Temperature and High-Shear Rate by Multicell Capillary Viscometer [ILS No. 849] ASTM D4741-12, Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer [ILS No. 850]
10/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:B09-1019
An interlaboratory study was conducted by one laboratory testing one material for alloy contamination and one material for iron contamination to establish a precision statement for test method B795. The laboratory reported fifteen replicate test results for each analysis.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:C14-1006
An interlaboratory study was conducted by six laboratories testing five samples of varying targeted results to establish a precision statement for test method F218.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1172
An interlaboratory study was conducted by eight laboratories testing four samples of varying targeted results to establish a precision statement for test method D7855/D7855M.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1766
An interlaboratory study was conducted by ten laboratories testing eleven types of Biodiesel (FAME) used to establish a precision statement for test method D1160.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D05-1042
Interlaboratory Study to Establish Precision Statements for ASTM D4239-13, Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High- Temperature Tube Furnace Combustion
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E35-1008
An interlaboratory study was conducted by eight laboratories testing three samples of varying targeted results to establish a precision statement for test method E2871.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:F02-1036
An interlaboratory study was conducted by twelve laboratories testing seven samples to establish a precision statement for test method F1249.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F02-1037
An interlaboratory study was conducted by eight laboratories testing seven samples to establish a precision statement for test method E398.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F27-1000
An interlaboratory study was conducted by one laboratory testing seven different types of snowboards to establish a precision statement for test method F3030.
1/10/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1765
An interlaboratory study was conducted by twelve laboratories testing 24 sulfur containing materials of varying targeted results used to establish a precision statement for test method D7039.
15/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:C08-1023
An interlaboratory study was conducted by five laboratories testing two samples of varying targeted results to establish a precision statement for test method C1445.
1/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1775
An interlaboratory study was conducted by ten laboratories testing twenty-six samples to establish a precision statement for test method D7279.
1/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D20-1258
An interlaboratory study was conducted by one laboratory testing two insulating materials in duplicate to establish a precision statement for test method D1822.
1/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D20-1259
An interlaboratory study was conducted by eight laboratories testing ten samples of varying targeted results to establish a precision statement for test method D1822.
1/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D34-1019
An interlaboratory study was conducted by three laboratories. A total of 68 samples from six different rock types (lithologies) were tested to establish a precision statement for test method D5744.
1/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:E37-1043
An interlaboratory study was conducted by four laboratories using the Flash Method for the measurement of thermal diffusivity using uranium dioxide (UO2) to establish a precision statement for test method E1461.
1/9/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1049
An interlaboratory study was conducted by one laboratory that tested one PTA sample and one qualified terephthalic acid (QTA) sample for 4-CBA and p-TOL which was used to establish a precision statement for test method D7881.
15/8/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1050
An interlaboratory study was conducted by one laboratory that tested one PTA sample and one qualified terephthalic acid (QTA) sample used to establish a precision statement for test method D7882.
15/8/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1047
An interlaboratory study was conducted by one laboratory testing 1 PTA sample and 1 QTA (Qualified Terephthalic Acid) sample used to establish a precision statement for test method D7883.
1/8/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:D16-1048
An interlaboratory study was conducted by one laboratory testing 1 PTA sample and 1 QTA (Qualified Terephthalic Acid) sample used to establish a precision statement for test method D7884.
1/8/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información56,70 € -
ASTM Research Report RR:F02-1033
An interlaboratory study was conducted by three laboratories testing three samples of varying targeted results to establish a precision statement for test method F3004.
1/8/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D13-1137
An interlaboratory study was conducted in 2010 by six laboratories. Each laboratory was asked to report the skew of six different fabrics to determine the precision of ASTM D7811.
1/7/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C01-1013
An interlaboratory study was conducted by thirteen laboratories testing six different types of cement, over seven days, by Method A and Method B to establish a precision statement for test methods C1702.
15/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1762
Inter Laboratory Study to Establish a Precision Statement for ASTM D7756-13, Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with liquid, On-Column Injection
15/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1763
An interlaboratory study was conducted by seven laboratories testing five materials that measure the concentration of Drag Reducing Additive (DRA) in jet fuel to establish a precision statement for test method D7872.
15/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D19-1191
An interlaboratory study was conducted by ten operators in eight laboratories testing six samples of varying targeted results used to establish a precision statement for test method D7284.
15/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1120
An interlaboratory study was conducted by eight laboratories testing six samples to establish a precision statement for test method E2371.
15/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:E08-1009
Interlaboratory Study to Establish Precision Statements for ASTM E2714-13, Test Method for Creep-Fatigue Testing
15/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información95,55 € -
ASTM Research Report RR:D01-1170
An interlaboratory study was conducted by eight laboratories, testing three or four different materials on ASTM D6037, Method A. Every ",test result", represents an individual determination, and all participants were asked to report five test results. Unabraded and abraded gloss were measured and reported with both 20°, and 60°, geometry for all samples.
1/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D01-1171
An interlaboratory study was conducted by six laboratories. There were six samples of varying targeted results to establish a precision statement for test method D6037.
1/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D16-1046
An interlaboratory study was conducted by two laboratories analyzing six samples, three times each establish a precision statement for test method D7871.
1/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E27-1007
An interlaboratory study was conducted in 2012 by ten laboratories, testing a single type of food grade starch. Each analyst was asked to report three test results to determine the precision of ASTM E2931.
1/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F08-1012
An intralaboratory study was conducted by nine analysts from a single laboratory, measuring the contrast of three different color marking combinations, to establish precision statements for F3022. Each analyst reported three replicate test results for every combination.
1/6/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C11-1002
Interlaboratory Study to Establish Precision Statements for ASTM C474-13, Test Methods for Joint Treatment Materials for Gypsum Board Construction
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1756
An interlaboratory study was conducted by eleven laboratories, testing fourteen B100 samples of varying targeted results to establish a precision statement for test method D6584.
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D02-1759
Interlaboratory Study to Establish Precision Statements for ASTM D7319-13, Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Butanol by Direct Injection Suppressed Ion Chromatography
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D02-1760
This research report was conducted for ASTM method D2887 for Committee D02 and Subcommittee D02.04.0H and the purpose is to determine the values through ILS of reference gas oil lot 2G and is included in Table 3 of D2887. There were 67 participants for the ILS which 35 sets of data were returned for statically analysis. The results are included in this research report.
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1761
An Interlaboratory Study (ILS 158-WK23046) was conducted to establish a precision statement for D2887-06a (Boiling Range Distribution of Petroleum Fractions by Gas Chromatography) in the Accelerated mode as is described in Appendix X6 ,This mode of operation results in a time savings of 50%. In addition the columns described can be used without dissolving the sample in Carbon Disulfide. Also the samples used for the precision statement included Biodiesel Mixtures in the range from 5% to 20% (B5,B10 and B20). During the balloting of the appendix it was determined that a precision statement would be required in order to validate these new mode of carrying out the method.
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:E20-1003
An interlaboratory study was conducted by six laboratories, testing three different types of connectors, to establish precision statements for E2820. Every analyst was instructed to report three replicate test results in this study.
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:G04-1002
An interlaboratory study was conducted by six laboratories. Each laboratory conducted a series of tests on the same non-metallic material (PTFE) to establish a precision statement for test method G0074.
1/5/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D20-1257
An interlaboratory study was conducted by six laboratories testing four different polyurethane materials to establish precision statements for D4890. Every ",test result", represents an individual determination. Each laboratory reported three replicate test results for each material.
1/4/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1119
An interlaboratory study was conducted by seven laboratories testing a set of calibration mixtures and samples of standard calcium carbonate and ferrous sulfate, calibration mixtures (-1.00%, 0%, 0.200%, 1.00%, and 2.00 % calcium carbonate) and test materials (D, L, M, N, O, and P).
1/4/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:E37-1042
An interlaboratory study was conducted by three laboratories analyzing a total of three powdered compounds by three unique methods as part of this study to establish precision statements for E2551. Every test result represents an individual determination, and each lab was asked to report triplicate results for each compound.
1/4/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:F40-1002
Interlaboratory Study 609 (originally ILS 208) was conducted in two parts. The first activity was to obtain quantitative results for six glass bead materials to enable the task group to assign reference values using test methods independent of the X-ray fluorescence (XRF) method under development. With reference values, a bias statement can be included in the new standard. The second activity of ILS 609 was conducted to establish a precision and bias statement for the XRF results used to validate F2980 Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence.
15/2/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D01-1169
An interlaboratory study was conducted by eleven laboratories, analyzing materials representing five different property types to establish precision statements. Each ",test result", reported represents an individual determination and the participating labs reported three replicate ",test results", for each material type.
1/2/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D16-1045
An interlaboratory study was conducted by two laboratories analyzing 5 samples, three times each, to establish precision statements for D7266. One laboratory analyzed the samples on two different instruments.
1/2/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:G01-1026
An interlaboratory study was conducted by eight laboratories to establish a precision statement for test method G5. Each laboratory was sent four samples and told to test each sample once in accordance with the Standard G5 potentiodynamic test procedure to give quadruplicate test results from each laboratory.
1/2/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:C01-1012
An interlaboratory study was conducted by ten laboratories, testing a single type of material, to establish a precision statement for C1012. Every analyst was instructed to report triplicate test results in this study.
1/1/2013 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:C09-1042
An interlaboratory study was conducted by ten laboratories, testing two gradations of stone to establish a precision statement for test method C535.
15/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:C16-1040
An interlaboratory study to establish precision statements for E96-12 was conducted by six laboratories, analyzing four different materials. Each ",test result", reported represents an individual determination and all participants reported three replicate test results for every material.
15/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1751
An interlaboratory study was conducted to establish precision statements for D7577 in 2011 by seven laboratories, testing ten gasoline mixtures with ratings from 1 to 5. Each ",test result", reported represents an individual determination, and all participants were asked to report duplicate ",test results", for each mixture.
1/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1754
Interlaboratory Study to Establish Precision Statements for ASTM D7795-12, New Test Method to Measure Acidity In Ethanol and Ethanol Blends
1/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1758
Historically most commercially-available spark-ignition engine fuels have contained no or relatively low concentrations of oxygenated compounds, e.g., until recently, such fuels sold in the U.S. contained ethanol at concentrations of 10 volume-% or less. However, because of recent government action to encourage greater use of renewable fuel components, the concentration of ethanol in spark-ignition engine fuels is expected to increase in the U.S and other regions. Because of their limited production in the past, little is known about the applicability to these higher ethanol fuels of the standard laboratory tests that have traditionally been used to measure the properties of spark-ignition engine fuels. One such property is the octane rating of the fuel, which is measured by ASTM D2699, �,Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel,�, and ASTM D2700, �,Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel.�, Octane testing of fuels containing more than 10 volume-% ethanol has been quite limited in the past, and little is known about the precision of these test methods when applied to higher ethanol content blends. This inter-laboratory test program was therefore undertaken to assess the applicability and precision of D2699 and D2700 when these methods are used to determine octane ratings of the higher ethanol fuels expected in the near future. More specifically, the purposes of this inter-laboratory test program were: a. to demonstrate that test methods D2699 and D2700 as currently practiced are applicable to spark-ignition engine fuels containing up to 25 volume-% ethanol, and b. to determine the precision of D2699 and D2700 when fuels containing up to 25 volume-% ethanol are tested.
1/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información115,50 € -
ASTM Research Report RR:D16-1044
An interlaboratory study was conducted in 2011 by eight laboratories. Each laboratory tested up to five different levels of three hydrocarbons. Three laboratories ran samples twice using either different instruments or different calibration standards, resulting in eleven sets of results.
1/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:E01-1118
The ILS for E572 Test Method for Analysis of Stainless Steels by X-ray Fluorescence Spectrometry was started back in the 1980s and has had several coordinators for the study. In 2011, it was discovered that erroneous values were published in the precision and bias statement in E572. No copy of the original research report has been found. The report submitted by the participating laboratories were reevaluated and the results can be found in this research report.
1/12/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información89,25 € -
ASTM Research Report RR:D01-1165
An interlaboratory study was conducted in 2012 by six laboratories, testing four different surface preparations to establish a precision statement for ASTM D7682.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1166
An interlaboratory study was conducted in 2012 by seven laboratories, testing four different thermoplastic materials to establish a precision statement for ASTM D4797.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D01-1167
An interlaboratory study was conducted in 2011 by eleven laboratories testing samples prepared on three different representative coil industry metal substrates. Each substrate was coated with three different target coating weights (low, intermediate, and high) of either of two different Ti-containing commercial coil dry-in-place metal pretreatments.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:D02-1747
The objective of this round robin was to evaluate the precision of a new automated smoke point test apparatus and at to revise the precision of the current manual IP 57 test method. The test method used for this ILS was based on the IP 57 with the addition of dedicated sections for the automated procedure.SC-B-10 decided to include two domestic kerosines in this particular exercise to take the opportunity to determine the precision of both procedures for these types of samples that were not part of the scope of the current IP 57. The inter laboratory study was performed from November 2011 to February 2012, with 11 manual labs, 13 automated labs, 15 different samples tested in blind duplicate. The results were evaluated for precision according to the statistical procedures given in IP 367 (EN ISO 4259) as implemented in ASTM D02 computer program D2PP.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1748
An interlaboratory study was conducted by eleven laboratories, testing ten different materials to establish a precision statement for ASTM D7061.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1749
An interlaboratory study was conducted by eight laboratories, testing twenty one different materials to establish a precision statement for ASTM D5501.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D02-1750
An interlaboratory study was conducted by twenty laboratories, testing twelve jet fuel samples to establish a precision statement for test method D7042.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:F02-1032
An interlaboratory study was conducted in 2012 by twelve laboratories. Of the twelve laboratories that participated, seven tested the edge dip option, and five tested the eye dropper method. Each participant analyzed 100 randomly coded samples (50 produced with channels and 50 without channels) for each of five materials. Every analyst reported results to indicate the presence or absence of a channel. The results were tabulated as the number identified correctly, false positives, and false negatives, the details are given in this ASTM Research Report.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 € -
ASTM Research Report RR:G01-1025
An interlaboratory study was conducted by ten laboratories, testing one set of carbon steel sample to establish a precision statement for test method G202.
1/11/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:C16-1039
An interlaboratory study was conducted by two laboratories, the density, settling, and shrinkage of two different materials, in three size variations to establish a precision statement for ASTM C1497.
1/9/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información81,90 € -
ASTM Research Report RR:D31-1015
An intralaboratory study was conducted by one laboratory, reporting five replicate test results for six different specimen types to establish precision statements for D7816.
1/9/2012 - PDF DRM non imprimable - Inglés - ASTM
Más información63,00 €
