SAE ®
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
-
87,00 €
-
87,00 €
-
124,00 €
-
SAE AMS 2420F:2022-07-19
Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
19/7/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 5866F:2022-07-19
Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (302) Spring Temper
19/7/2022 - PDF - Inglés -
Más información75,00 € -
SAE AS 3089C:2022-07-19
STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .3750-24 UNJF-3A X .3750-24 UNJF-3A
19/7/2022 - PDF - Inglés -
Más información47,00 € -
SAE AMS 4803F:2022-07-19
Zinc Alloy Castings, Die 4.0Al - 0.04Mg (AG40A) As Cast (Stabilized: Jul 2022)
19/7/2022 - PDF - Inglés -
Más información66,00 € -
SAE J 1843:2022-07-13
Accelerator Pedal Position Sensor for Use with Electronic Controls in Medium- and Heavy-Duty Vehicle Applications—Truck and Bus
13/7/2022 - PDF - Inglés -
Más información109,00 € -
54,00 €
-
SAE J 141:2022-07-08
Seat Belt Hardware Performance Requirements (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información60,00 € -
SAE AMS 5716L:2022-07-08
Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, Rings and Stock for Rings and Forgings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat Treated
8/7/2022 - PDF - Inglés -
Más información66,00 € -
SAE ARP 1538C:2022-07-08
Arresting Hook Installation, Land-Based Aircraft (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información89,00 € -
SAE J 1803:2022-07-08
Seat Belt Restraint System Hardware - Glossary of Terms (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información79,00 € -
SAE AMS 4922D:2022-07-08
Titanium Alloy, Seamless, Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and Precipitation Heat Treated
8/7/2022 - PDF - Inglés -
Más información79,00 € -
SAE AMS 4942H:2022-07-08
Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
8/7/2022 - PDF - Inglés -
Más información66,00 € -
SAE AIR 5271A:2022-07-08
A Guideline for Application of High-Density Fiber Optic Interconnects to Aerospace Platforms (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información158,00 € -
SAE J 383:2022-07-08
Motor Vehicle Seat Belt Anchorages - Design Recommendations (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información86,00 € -
SAE AMS 5666K:2022-07-08
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Extrusions, Rings, and Stock for Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed
8/7/2022 - PDF - Inglés -
Más información87,00 € -
98,00 €
-
SAE AMS 4203D:2022-07-08
Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7351) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información79,00 € -
SAE AMS 2368E:2022-07-08
Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
8/7/2022 - PDF - Inglés -
Más información66,00 € -
SAE AMS 2482F:2022-07-08
Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited
8/7/2022 - PDF - Inglés -
Más información87,00 € -
83,00 €
-
SAE J 384:2022-07-08
Motor Vehicle Seat Belt Anchorages - Test Procedure (Stabilized: Jul 2022)
8/7/2022 - PDF - Inglés -
Más información75,00 € -
39,00 €
-
SAE AMS 5821H:2022-07-06
Steel, Corrosion-Resistant, Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade (Stabilized: Jul 2022)
6/7/2022 - PDF - Inglés -
Más información75,00 € -
SAE AS 7458C:2022-07-06
Studs, Steel, Low Alloy, Heat-Resistant Normalized and Tempered, Roll Threaded 135000 psi Tensile Strength
6/7/2022 - PDF - Inglés -
Más información98,00 € -
66,00 €
-
SAE J 2014:2022-07-06
Pneumatic Tire/Wheel/Runflat Assembly Qualifications for Military Tactical Wheeled Vehicles
6/7/2022 - PDF - Inglés -
Más información146,00 € -
SAE J 3077:2022-07-06
Definitions and Data Sources for the Driver Vehicle Interface (DVI) (Stabilized: Jul 2022)
6/7/2022 - PDF - Inglés -
Más información143,00 € -
SAE AMS 7101/1:2022-07-06
Fused Filament Fabrication, Type 1, Class 1, Form 1, Grade 0, Natural Color Material for
6/7/2022 - PDF - Inglés -
Más información54,00 € -
SAE J 1609:2022-07-06
Air Reservoir Capacity Performance Guide - Trucks and Buses (Stabilized: Jul 2022)
6/7/2022 - PDF - Inglés -
Más información47,00 € -
SAE AIR 5699A:2022-07-06
A Guide for the Damaging Effects of Tire and Wheel Failures
6/7/2022 - PDF - Inglés -
Más información116,00 € -
SAE AMS 5599J:2022-07-06
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Annealed
6/7/2022 - PDF - Inglés -
Más información87,00 € -
SAE AMS 6280N:2022-07-06
Steel Bars, Forgings, Rings and Forging Stock 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)
6/7/2022 - PDF - Inglés -
Más información79,00 € -
SAE J 2580:2022-07-06
Identification and Installation of Air Brake System Components (Stabilized: Jul 2022)
6/7/2022 - PDF - Inglés -
Más información66,00 € -
89,00 €
-
96,00 €
-
SAE AMS 6424H:2022-07-06
Steel Bars, Forgings, Mechanical Tubing and Forging Stock 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C)
6/7/2022 - PDF - Inglés -
Más información79,00 € -
SAE J 2627:2022-07-06
Braking System Definitions - Truck and Bus (Stabilized: Jul 2022)
6/7/2022 - PDF - Inglés -
Más información96,00 € -
SAE J 1911:2022-07-06
Test Procedure for Air Reservoir Capacity - Truck and Bus (Stabilized: Jul 2022)
6/7/2022 - PDF - Inglés -
Más información66,00 € -
SAE AMS 4028J:2022-07-06
Aluminum Alloy Sheet and Plate 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-O) Annealed
6/7/2022 - PDF - Inglés -
Más información66,00 € -
131,00 €
-
SAE AS 81714/63E:2022-07-06
TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, STUD AND FLANGE TYPE MOUNTING, SERIES II
6/7/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 4971M:2022-07-06
Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable
6/7/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 5608H:2022-07-06
Cobalt Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated
6/7/2022 - PDF - Inglés -
Más información87,00 € -
SAE/USCAR-2-8:2022-06-30
PERFORMANCE SPECIFICATION FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS
30/6/2022 - PDF - Inglés -
Más información152,00 € -
39,00 €
-
SAE J 2779:2022-06-29
Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy
29/6/2022 - PDF - Inglés -
Más información60,00 € -
143,00 €
-
SAE AS 60491/6:2022-06-27
SLEEVE, CHAFE PROTECTION, WRAP-AROUND, SELF-CLOSING (-55 TO +175 °C)
27/6/2022 - PDF - Inglés -
Más información47,00 € -
SAE AIR 1389C:2022-06-27
FAR - Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft
27/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE AS 3087C:2022-06-27
STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .2500-28 UNJF-3A X .2500-28 UNJF-3A
27/6/2022 - PDF - Inglés -
Más información47,00 € -
87,00 €
-
119,00 €
-
SAE AS 21152E:2022-06-27
BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, HOLLOW SHANK, SELF-ALIGNING, AIRFRAME, TYPE III, -65 TO 300 °F
27/6/2022 - PDF - Inglés -
Más información47,00 € -
SAE AIR 4358A:2022-06-27
Steering Effect of Tilted, Free-Swiveling Nose Gears (Stabilized: Jun 2022)
27/6/2022 - PDF - Inglés -
Más información93,00 € -
SAE AS 9967B:2022-06-27
O-Ring Molded from AMS7273 Fluorosilicone (FVMQ) Rubber Material
27/6/2022 - PDF - Inglés -
Más información93,00 € -
SAE AS 21150F:2022-06-27
BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, SOLID SHANK, SELF-ALIGNING, AIRFRAME, TYPE I, -65 TO 300 °F
27/6/2022 - PDF - Inglés -
Más información47,00 € -
SAE ARP 1507B:2022-06-27
Helicopter Engine/Airframe Interface Document and Checklist
27/6/2022 - PDF - Inglés -
Más información111,00 € -
SAE J 2698:2022-06-22
Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus
22/6/2022 - PDF - Inglés -
Más información83,00 € -
SAE J 3102:2022-06-21
Ambulance Patient Compartment Structural Integrity Test to Support SAE J3027 Compliant Litter Systems
21/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE J 3027:2022-06-21
Ambulance Litter Integrity, Retention, and Patient Restraint
21/6/2022 - PDF - Inglés -
Más información86,00 € -
SAE J 3044:2022-06-21
Occupant Restraint and Equipment Mounting Integrity - Rear Impact Ambulance Patient Compartment
21/6/2022 - PDF - Inglés -
Más información54,00 € -
75,00 €
-
SAE J 2918:2022-06-20
Engine-Off Cab Heating and Air Conditioning Systems Test Procedure and Performance Requirements - Trucks with and without Sleepers
20/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE J 393:2022-06-20
Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles
20/6/2022 - PDF - Inglés -
Más información86,00 € -
SAE AMS 2631G:2022-06-20
Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet, and Plate
20/6/2022 - PDF - Inglés -
Más información103,00 € -
SAE AMS 5588H:2022-06-20
Nickel Alloy, Corrosion- and Heat-Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated
20/6/2022 - PDF - Inglés -
Más información70,00 € -
39,00 €
-
96,00 €
-
153,00 €
-
SAE AMS 5570R:2022-06-20
Steel, Corrosion- and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (321) Solution Heat Treated
20/6/2022 - PDF - Inglés -
Más información87,00 € -
SAE AS 3088C:2022-06-20
STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .3125-24 UNJF-3A X .3125-24 UNJF-3A
20/6/2022 - PDF - Inglés -
Más información47,00 € -
SAE J 2956:2022-06-20
Occupant Restraint and Equipment Mounting Integrity – Side Impact Ambulance Patient Compartment
20/6/2022 - PDF - Inglés -
Más información54,00 € -
SAE AMS 5581G:2022-06-20
Nickel Alloy, Corrosion- and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Annealed
20/6/2022 - PDF - Inglés -
Más información87,00 € -
SAE AS 22759/59:2022-06-20
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, FLUORIDE CONTROLLED, MEDIUM WEIGHT, SILVER-COATED COPPER, 200 °C, 600 VOLT, ROHS
20/6/2022 - PDF - Inglés -
Más información54,00 € -
SAE AS 604F:2022-06-20
Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic
20/6/2022 - PDF - Inglés -
Más información116,00 € -
SAE J 2917:2022-06-20
Occupant Restraint and Equipment Mounting Integrity – Frontal Impact Ambulance Patient Compartment
20/6/2022 - PDF - Inglés -
Más información54,00 € -
SAE AMS 4948:2022-06-20
Titanium Alloy, Hot Rolled Sheet and Strip 5Al - 1Fe Annealed
20/6/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 3086C:2022-06-20
STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .1900-32 UNJF-3A X .1900-32 UNJF-3A
20/6/2022 - PDF - Inglés -
Más información39,00 € -
70,00 €
-
SAE AIR 1351K:2022-06-20
Manufacturers’ Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories
20/6/2022 - PDF - Inglés -
Más información113,00 € -
SAE AMS 4720J:2022-06-20
Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)
20/6/2022 - PDF - Inglés -
Más información60,00 € -
SAE J 2646:2022-06-20
Cab Air-Conditioning Test Procedure - Heavy Trucks with and without Sleepers
20/6/2022 - PDF - Inglés -
Más información79,00 € -
SAE AMS 5556K:2022-06-20
Steel, Corrosion- and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (347) Solution Heat Treated
20/6/2022 - PDF - Inglés -
Más información79,00 € -
SAE AMS 2467A:2022-06-20
Hard Anodic Coating of Magnesium Alloys Alkaline Type, High Voltage
20/6/2022 - PDF - Inglés -
Más información79,00 € -
SAE AMS 3281G:2022-06-13
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
13/6/2022 - PDF - Inglés -
Más información98,00 € -
SAE AS 6070/3B:2022-06-13
CABLE, HIGH SPEED DATA QUAD, 24 AWG COPPER ALLOY, 110 OHM, 200 °C
13/6/2022 - PDF - Inglés -
Más información54,00 € -
SAE AS 22759/60:2022-06-13
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINEKD MODIFIED ETFE, FLUORIDE CONTROLLED, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
13/6/2022 - PDF - Inglés -
Más información54,00 € -
SAE AMS 3240L:2022-06-13
Elastomer: Chloroprene Rubber (CR) Weather Resistant 35 - 45
13/6/2022 - PDF - Inglés -
Más información79,00 € -
SAE J 3219:2022-06-13
Hydrogen Fuel Quality Screening Test of Chemicals for Fuel Cell Vehicles
13/6/2022 - PDF - Inglés -
Más información96,00 € -
SAE J 3231:2022-06-13
Deflection Measurement for Friction Materials Using Segment Applicator
13/6/2022 - PDF - Inglés -
Más información86,00 € -
SAE AS 8438/2:2022-06-13
Terminus, Fiber Optic, Expanded Beam, Single-Mode, Ball Lens, Removable, Rear Release Socket, Size 16, Harsh Environment, General Specification
13/6/2022 - PDF - Inglés -
Más información98,00 € -
86,00 €
-
SAE AMS 3241K:2022-06-13
Elastomer: Chloroprene Rubber (CR) Weather Resistant 55 - 65
13/6/2022 - PDF - Inglés -
Más información79,00 € -
89,00 €
-
89,00 €
-
SAE AS 8438/1:2022-06-09
Terminus, Fiber Optic, Expanded Beam, Single-Mode, Ball Lens, Removable, Rear Release Pin, Size 16, Harsh Environment, General Specification
9/6/2022 - PDF - Inglés -
Más información96,00 € -
SAE AMS 4333E:2022-06-09
Aluminum Alloy, Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
9/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 4133F:2022-06-09
Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
9/6/2022 - PDF - Inglés -
Más información79,00 € -
149,00 €
-
SAE AS 151701D:2022-06-09
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A
9/6/2022 - PDF - Inglés -
Más información39,00 € -
SAE J 3147:2022-06-09
Assessment of Evaluation Method Types to Determine Energy Efficiency of Multi-Vehicle Systems
9/6/2022 - PDF - Inglés -
Más información109,00 € -
SAE J 2878:2022-06-09
Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
9/6/2022 - PDF - Inglés -
Más información66,00 € -
SAE ARP 6175A:2022-06-09
Definition, Recognition, Troubleshooting, and Repair of Aircraft Hydraulic System External Leakage
9/6/2022 - PDF - Inglés -
Más información111,00 € -
SAE AMS 4327B:2022-06-02
Aluminum Alloy, Plate (2098-O) 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr Annealed
2/6/2022 - PDF - Inglés -
Más información66,00 € -
SAE AMS 5339H:2022-06-02
Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información89,00 € -
SAE AMS 4947:2022-06-02
Titanium Alloy, Cold Rolled Sheet and Strip 5Al - 1Fe Annealed
2/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 5746G:2022-06-02
Alloy, Corrosion- and Heat-Resistant, Bars and Forgings 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al - 31Fe (D979) Consumable Electrode Vacuum Melted Solution and Precipitation Heat Treated (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información83,00 € -
SAE AMS 5814D:2022-06-02
Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 5822E:2022-06-02
Steel, Corrosion and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 4213B:2022-06-02
Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged
2/6/2022 - PDF - Inglés -
Más información60,00 € -
SAE AMS 4960:2022-06-02
Titanium Alloy Powder Titanium Ti-5553 (Ti - 5Al - 5Mo - 5V - 3Cr)
2/6/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 126587C:2022-06-02
STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 UNS X .3750 - 24 UNF-3A
2/6/2022 - PDF - Inglés -
Más información39,00 € -
248,00 €
-
SAE AMS 2632C:2022-06-02
Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
2/6/2022 - PDF - Inglés -
Más información113,00 € -
SAE J 3060:2022-06-02
Automotive and Heavy Duty Storage Battery Vibration (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información87,00 € -
SAE AMS 5817G:2022-06-02
Steel, Corrosion- and Heat-Resistant, Welding Wire 13Cr - 2.0Ni - 3.0W (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 5823F:2022-06-02
Steel, Corrosion- and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 5829F:2022-06-02
Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5Al Vacuum Induction Melted (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información75,00 € -
SAE J 930:2022-06-02
Storage Batteries for Off-Road Self-Propelled Work Machines (Stabilized: Jun 2022)
2/6/2022 - PDF - Inglés -
Más información83,00 € -
105,00 €
-
SAE AS 4356B:2022-05-26
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 40 TO 90°
26/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 621D:2022-05-26
HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
26/5/2022 - PDF - Inglés -
Más información60,00 € -
SAE AS 625D:2022-05-26
HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 45 TO 90°, HEAVYWEIGHT
26/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 626D:2022-05-26
HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 TO 90°, HEAVYWEIGHT
26/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 4354B:2022-05-26
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 90°
26/5/2022 - PDF - Inglés -
Más información60,00 € -
66,00 €
-
SAE J 515:2022-05-26
Specification for O-Ring Materials Used with Hydraulic Connectors
26/5/2022 - PDF - Inglés -
Más información101,00 € -
SAE AS 622D:2022-05-26
HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
26/5/2022 - PDF - Inglés -
Más información66,00 € -
128,00 €
-
SAE AS 4355B:2022-05-26
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 45 TO 45°
26/5/2022 - PDF - Inglés -
Más información60,00 € -
124,00 €
-
SAE AS 623D:2022-05-26
HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 90°, HEAVYWEIGHT
26/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 624D:2022-05-26
HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 45° TO 45°, HEAVYWEIGHT
26/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE J 1502:2022-05-26
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
26/5/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 4933G:2022-05-26
Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized
26/5/2022 - PDF - Inglés -
Más información75,00 € -
SAE AIR 4783A:2022-05-24
Glossary of Terms - Aircraft Ground Refueling and Defueling
24/5/2022 - PDF - Inglés -
Más información101,00 € -
SAE AS 3405B:2022-05-24
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A
24/5/2022 - PDF - Inglés -
Más información47,00 € -
144,00 €
-
70,00 €
-
66,00 €
-
89,00 €
-
SAE AMS 6953A:2022-05-24
Titanium Alloy Sheet, 6Al – 4Sn – 3Nb – 0.5Mo – 0.3Si, Duplex Annealed
24/5/2022 - PDF - Inglés -
Más información75,00 € -
SAE AS 4353B:2022-05-24
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45°
24/5/2022 - PDF - Inglés -
Más información60,00 € -
SAE J 1351:2022-05-24
Hot Odor Test for Materials Used in Vehicle Interior Cabins
24/5/2022 - PDF - Inglés -
Más información87,00 € -
SAE AS 4357B:2022-05-24
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, 90° TO 90°
24/5/2022 - PDF - Inglés -
Más información60,00 € -
SAE ARP 6952:2022-05-24
Sizing Criteria for Stored Energy Systems Used for Emergency Braking
24/5/2022 - PDF - Inglés -
Más información119,00 € -
89,00 €
-
SAE AIR 4367B:2022-05-24
Aircraft Inflight Ice Detectors and Icing Rate Measuring Instruments
24/5/2022 - PDF - Inglés -
Más información116,00 € -
SAE AMS 3328D:2022-05-24
Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 35 - 45 Type “A” Durometer Hardness for Products Used in Engine Oil Systems/Fuel Systems
24/5/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 4978J:2022-05-24
Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed
24/5/2022 - PDF - Inglés -
Más información75,00 € -
139,00 €
-
142,00 €
-
SAE AS 4352B:2022-05-24
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT
24/5/2022 - PDF - Inglés -
Más información60,00 € -
SAE AS 91111D:2022-05-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
20/5/2022 - PDF - Inglés -
Más información39,00 € -
SAE AS 3554D:2022-05-20
NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, REDUCED HEIGHT 180 KSI, 1400 °F, UNS N07001
20/5/2022 - PDF - Inglés -
Más información47,00 € -
SAE J 2943:2022-05-20
Recommended Practice for Filter Weighing of Particulate Matter Emissions
20/5/2022 - PDF - Inglés -
Más información124,00 € -
SAE J 2360:2022-05-20
Automotive Gear Lubricants for Commercial and Military Use
20/5/2022 - PDF - Inglés -
Más información87,00 € -
SAE AMS 4951K:2022-05-20
Titanium Welding Wire Commercially Pure Environment Controlled Packaging
20/5/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 4181D:2022-05-19
Aluminum Alloy, Welding Wire, 7.0Si - 0.38Mg - 0.10Ti (4008 or 356)
19/5/2022 - PDF - Inglés -
Más información66,00 € -
86,00 €
-
SAE AMS 5554H:2022-05-16
Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated
16/5/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 4939D:2022-05-16
Titanium Alloy Sheet, Strip, and Plate 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated
16/5/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 4535E:2022-05-16
Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
16/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AMS 5580M:2022-05-16
Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed
16/5/2022 - PDF - Inglés -
Más información70,00 € -
SAE AS 1553B:2022-05-16
Performance Standard for Tube Support Loop-Cushioned Clamp (Stabilized: May 2022)
16/5/2022 - PDF - Inglés -
Más información70,00 € -
83,00 €
-
87,00 €
-
SAE AS 162501C:2022-05-16
STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G887400, .4375-14 UNS X .3750-24 UNF-3A (Stabilized: May 2022)
16/5/2022 - PDF - Inglés -
Más información54,00 € -
70,00 €
-
SAE AMS 7002A:2022-05-16
Process Requirements for Production of Metal Powder Feedstock for Use in Additive Manufacturing of Aerospace Parts
16/5/2022 - PDF - Inglés -
Más información113,00 € -
70,00 €
-
SAE J 1791:2022-05-16
Self-Propelled Sweepers and Scrubbers Dual Position Driving Controls and Displays (Stabilized: May 2022)
16/5/2022 - PDF - Inglés -
Más información70,00 € -
SAE AMS 5698H:2022-05-16
Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable
16/5/2022 - PDF - Inglés -
Más información70,00 € -
155,00 €
-
SAE AMS 7000A:2022-05-16
Laser-Powder Bed Fusion (L-PBF) Produced Parts, Nickel Alloy, Corrosion- and Heat-Resistant, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb Stress Relieved, Hot Isostatic Pressed and Solution Annealed
16/5/2022 - PDF - Inglés -
Más información75,00 € -
SAE AMS 5871G:2022-05-16
Iron-Nickel-Chromium Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated
16/5/2022 - PDF - Inglés -
Más información60,00 € -
SAE AMS 5679J:2022-05-16
Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe
16/5/2022 - PDF - Inglés -
Más información54,00 € -
SAE AMS 5935A:2022-05-16
Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12Cr - 10Ni - 2Mo - 0.9Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
16/5/2022 - PDF - Inglés -
Más información79,00 € -
SAE AS 3611C:2022-05-16
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN
16/5/2022 - PDF - Inglés -
Más información93,00 € -
SAE AS 158901C:2022-05-16
STUD, STEPPED, NECKED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A (Stabilized: May 2022)
16/5/2022 - PDF - Inglés -
Más información54,00 € -
SAE AMS 5699H:2022-05-16
Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable
16/5/2022 - PDF - Inglés -
Más información87,00 € -
SAE AS 1171B:2022-05-16
BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP (Stabilized: May 2022)
16/5/2022 - PDF - Inglés -
Más información47,00 € -
SAE MA 2039B:2022-05-16
PLUG, PORT - MJ THREAD, O-RING SEAL, AMS-5640, METRIC (Stabilized: May 2022)
16/5/2022 - PDF - Inglés -
Más información47,00 € -
SAE/USCAR-49:2022-05-10
PERFORMANCE SPECIFICATION FOR MINIATURE AUTOMOTIVE COAXIAL CONNECTORS
10/5/2022 - PDF - Inglés -
Más información128,00 € -
SAE AS 3076A:2022-05-09
RING - BACK UP, BOSS CONNECTION, POLYTETRAFLUORETHYLENE (Stabilized: May 2022)
9/5/2022 - PDF - Inglés -
Más información39,00 € -
SAE AS 115851C:2022-05-09
SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-20 UNC - 3A
9/5/2022 - PDF - Inglés -
Más información47,00 € -
SAE AMS 4233D:2022-05-09
Aluminum Alloy, Welding Wire 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201)
9/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 1001K:2022-05-09
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS
9/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 1008K:2022-05-09
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS
9/5/2022 - PDF - Inglés -
Más información70,00 € -
118,00 €
-
SAE AS 3269B:2022-05-09
SLEEVE HALF – REINFORCING, TUBE, SHOULDER (Stabilized: May 2022)
9/5/2022 - PDF - Inglés -
Más información54,00 € -
54,00 €
-
SAE AMS 5955C:2022-05-09
Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Forging Stock 10Cr - 12Ni - 2Mo - 1.45Al - 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
9/5/2022 - PDF - Inglés -
Más información79,00 € -
SAE AS 1002K:2022-05-09
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD AND INTERNAL PORT ON RUN, FLARELESS
9/5/2022 - PDF - Inglés -
Más información66,00 € -
SAE AS 1958A:2022-05-09
PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR (Stabilized: May 2022)
9/5/2022 - PDF - Inglés -
Más información47,00 € -
SAE AS 85421/2C:2022-05-09
FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE
9/5/2022 - PDF - Inglés -
Más información47,00 € -
SAE AIR 6813:2022-05-09
Landing Gear Manufacturing, Maintenance, Repair, and Overhaul Critical Processes
9/5/2022 - PDF - Inglés -
Más información130,00 €