25.100.50 : Terrajas y machos de roscar
-
121,00 €
-
NBN ISO 2284:2021
Hand taps for parallel and taper pipe threads ? General dimensions and marking
7/6/2021 - PDF - Francés -
Más información58,00 € -
NBN ISO 8051:2021
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess ISO 8051:2016
7/6/2021 - PDF - Inglés -
Más información37,00 € -
121,00 €
-
NBN ISO 2284:2021
Hand taps for parallel and taper pipe threads — General dimensions and marking ISO 2284:2017
7/6/2021 - PDF - Inglés -
Más información58,00 € -
NBN ISO 8051:2021
Long shank taps with nominal diameters from M3 to M10 ? Full-diameter shank taps with recess
7/6/2021 - PDF - Francés -
Más información37,00 € -
DIN 382:2020-11
Hexagonal die-nuts - Dimensions, designation, material, type and labelling for hexagonal high-speed steel dies
1/11/2020 - PDF - Alemán -
Más información59,63 € -
34,67 €
-
DIN 4000-80:2019-03
Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies
1/3/2019 - PDF - Alemán -
Más información79,72 € -
DIN 4003-80:2019-03
Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies.
1/3/2019 - PDF - Alemán -
Más información92,62 € -
NF ISO 2284, E66-120 (12/2017)
Hand taps for parallel and taper pipe threads - General dimensions and marking
1/12/2017 - Papel - Francés -
Más información48,00 € -
83,85 €
-
BS ISO 2284:2017
Hand taps for parallel and taper pipe threads. General dimensions and marking
31/3/2017 - PDF - Inglés -
Más información180,00 € -
293,00 €
-
148,00 €
-
148,00 €
-
DIN EN ISO 4230:2017-03
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016), German version EN ISO 4230:2016
1/3/2017 - PDF - Inglés -
Más información57,57 € -
DIN EN ISO 4230:2017-03
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016), German version EN ISO 4230:2016
1/3/2017 - PDF - Alemán -
Más información45,98 € -
DIN EN ISO 4231:2017-03
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016), German Version EN ISO 4231:2016
1/3/2017 - PDF - Inglés -
Más información66,07 € -
NF EN ISO 4231, E66-153 (03/2017)
Hand - and machine-operated circular screwing dies for parallel pipe threads - G series
1/3/2017 - Papel - Francés -
Más información33,62 € -
DIN EN ISO 4231:2017-03
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016), German Version EN ISO 4231:2016
1/3/2017 - PDF - Alemán -
Más información52,90 € -
ISO 2284:2017 (R2022)
Hand taps for parallel and taper pipe threads
General dimensions and marking
24/2/2017 - Papel - Inglés -
Más información72,00 € -
ISO 2284:2017 (R2022)
Hand taps for parallel and taper pipe threads
General dimensions and marking
24/2/2017 - Papel - Francés -
Más información72,00 € -
UNE-EN ISO 4230:2017
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
22/2/2017 - PDF - Inglés -
Más información62,40 € -
UNE-EN ISO 4231:2017
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
22/2/2017 - PDF - Inglés -
Más información62,40 € -
UNE-EN ISO 4230:2017
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
22/2/2017 - PDF - Español -
Más información52,00 € -
UNE-EN ISO 4231:2017
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
22/2/2017 - PDF - Español -
Más información52,00 € -
NF EN ISO 4230, E66-154 (01/2017)
Hand - and machine-operated circular screwing dies for taper pipe threads - R series
1/1/2017 - Papel - Francés -
Más información33,62 € -
BS EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads. G series
31/12/2016 - PDF - Inglés -
Más información151,00 € -
NBN EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
21/12/2016 - PDF - Inglés -
Más información37,00 € -
NBN EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
21/12/2016 - PDF - Francés -
Más información37,00 € -
NBN EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
21/12/2016 - PDF - Inglés -
Más información37,00 € -
NBN EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
21/12/2016 - PDF - Francés -
Más información37,00 € -
NBN EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
21/12/2016 - PDF - Alemán -
Más información37,00 € -
NBN EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
21/12/2016 - PDF - Alemán -
Más información37,00 € -
BS EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads. R series
30/11/2016 - PDF - Inglés -
Más información151,00 € -
ISO 4231:2016 (R2022)
Hand- and machine-operated circular screwing dies for parallel pipe threads
G series
14/10/2016 - Papel - Inglés -
Más información48,00 € -
ISO 4231:2016 (R2022)
Hand- and machine-operated circular screwing dies for parallel pipe threads
G series
14/10/2016 - Papel - Francés -
Más información48,00 € -
ISO 4230:2016 (R2022)
Hand- and machine-operated circular screwing dies for taper pipe threads
R series
6/10/2016 - Papel - Francés -
Más información48,00 € -
ISO 4230:2016 (R2022)
Hand- and machine-operated circular screwing dies for taper pipe threads
R series
6/10/2016 - Papel - Inglés -
Más información48,00 € -
BS ISO 8051:2016
Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
30/9/2016 - PDF - Inglés -
Más información151,00 € -
ISO 8051:2016 (R2023)
Long shank taps with nominal diameters from M3 to M10
Full-diameter shank taps with recess
19/9/2016 - Papel - Inglés -
Más información48,00 € -
ISO 8051:2016 (R2023)
Long shank taps with nominal diameters from M3 to M10
Full-diameter shank taps with recess
19/9/2016 - Papel - Francés -
Más información48,00 € -
DIN 802-3:2016-03
Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
1/3/2016 - PDF - Alemán -
Más información52,90 € -
DIN 357:2016-02
Machine nut taps for coarse pitch metric ISO-threads M3 to M68
1/2/2016 - PDF - Alemán -
Más información39,35 € -
DIN 376:2016-02
Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68
1/2/2016 - PDF - Alemán -
Más información39,35 € -
DIN 374:2016-01
Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4
1/1/2016 - PDF - Alemán -
Más información39,35 € -
DIN 371:2016-01
Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25
1/1/2016 - PDF - Alemán -
Más información45,98 € -
DIN 352:2016-01
Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68
1/1/2016 - PDF - Alemán -
Más información45,98 € -
DIN 2181:2015-09
Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4
1/9/2015 - PDF - Alemán -
Más información39,35 € -
DIN 2197-2:2015-03
Screwing taps - Part 2: Technical delivery conditions for ground carbide taps
1/3/2015 - PDF - Alemán -
Más información79,72 € -
DIN 2175-1:2015-03
Cold-forming taps - Part 1: Technical delivery conditions for high-speed steel cold-forming taps
1/3/2015 - PDF - Alemán -
Más información59,63 € -
DIN 2197-1:2015-03
Screwing taps - Part 1: Technical delivery conditions for ground high-speed steel taps
1/3/2015 - PDF - Alemán -
Más información79,72 € -
DIN 2175-2:2015-03
Cold-forming taps - Part 2: Technical delivery conditions for carbide cold-forming taps
1/3/2015 - PDF - Alemán -
Más información52,90 € -
DIN 2184-1:2015-02
Taps and cold forming taps - Part 1: Long type, General plan of dimensions
1/2/2015 - PDF - Alemán -
Más información39,35 € -
DIN 802-4:2012-01
Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
1/1/2012 - PDF - Alemán -
Más información65,89 € -
DIN EN 61029-2-12 VDE 0740-512:2011-12
Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines (IEC 61029-2-12:2010, modified), German version EN 61029-2-12:2011
1/12/2011 - - -
Más informaciónDe: 53,63 € -
DIN 5157:2011-07
Sets of taps - Sets of 2 taps for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4
1/7/2011 - PDF - Alemán -
Más información39,35 € -
IEC 61029-2-12:2010
IEC 61029-2-12:2010 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines
26/5/2010 - PDF - Inglés, Francés -
Más información92,00 € -
ASME B18.29.1-2010 (R2017)
Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series)
1/1/2010 - PDF DRM - Inglés -
Más información41,00 € -
25,00 €
-
25,00 €
-
DIN 2189:2008-11
Cold-forming taps for pipe threads G 1/16 to G 1 - Dimensions
1/11/2008 - PDF - Alemán -
Más información32,34 € -
22,99 €
-
DIN 5156:2008-11
Machine taps for pipe threads G 1/16 to G 2 and Rp 1/16 to Rp 2
1/11/2008 - PDF - Alemán -
Más información32,34 € -
DIN 2174:2008-11
Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0,25 to M52 × 4 - Dimensions
1/11/2008 - PDF - Alemán -
Más información39,35 € -
DIN 40432:2008-11
Sets of taps - Sets of 2 taps for steel conduit thread Pg 7 to Pg 48
1/11/2008 - PDF - Alemán -
Más información32,34 € -
ASME B18.29.2M-2005 (R2017)
Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series)
1/1/2005 - PDF DRM - Inglés -
Más información37,00 € -
DIN 2184-2:2003-12
Screwing taps and cold forming taps - Part 2: Basic dimensions of short shank taps
1/12/2003 - PDF - Inglés -
Más información57,57 € -
DIN 2184-2:2003-12
Taps and cold forming taps - Part 2: Short type, General plan of dimensions
1/12/2003 - PDF - Alemán -
Más información45,98 € -
59,63 €
-
DIN 40435:2003-07
Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions
1/7/2003 - PDF - Alemán -
Más información39,35 € -
74,58 €
-
DIN 802-6:2003-07
Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
1/7/2003 - PDF - Alemán -
Más información52,90 € -
46,02 €
-
JIS B 0176-4:2002 (R2013)
Threading tools - Vocabulary Part 4: Thread rolling dies
20/7/2002 - PDF - Japonés -
Más información41,86 € -
JIS B 0176-2:2002 (R2013)
Threading tools - Vocabulary Part 2: Thread cutting dies
20/7/2002 - PDF - Japonés -
Más información41,86 € -
36,27 €
-
JIS B 4451/ERRATUM 1:2002
Hand-and machine-operated circular screwing dies (Erratum 1)
1/1/2002 - PDF - Japonés -
Más información0,00 € -
ISO 2283:2000 (R2023)
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in
Reduced shank taps
23/3/2000 - Papel - Francés -
Más información72,00 € -
ISO 2283:2000 (R2023)
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in
Reduced shank taps
23/3/2000 - Papel - Inglés -
Más información72,00 € -
DIN 802-5:1997-02
Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread, threads for interference fits according to DIN 8141-1, coarse and fine pitches, manufacturing tolerances on the threaded portion
1/2/1997 - PDF - Alemán -
Más información45,98 € -
DIN 802-5:1997-02
Manufacturing tolerances for the threaded portion of screwing taps - Ground taps for ISO metric threads - Interference fit threads as in DIN 8141-1
1/2/1997 - PDF - Inglés -
Más información57,57 € -
BS 949-2:1992
Screwing taps. Specification for unified ground thread taps. Manufacturing tolerances
15/12/1992 - PDF - Inglés -
Más información180,00 € -
37,00 €
-
NBN EN 22568:1992
Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
23/7/1992 - PDF - Holandés -
Más información58,00 € -
NBN EN 25967:1992
Taps and thread cutting - Nomenclature of the main types and terminology (ISO 5967:1981)
23/7/1992 - PDF - Alemán -
Más información121,00 € -
37,00 €
-
NBN EN 22857:1992
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
23/7/1992 - PDF - Francés -
Más información89,00 € -
NBN EN 25967:1992
Taps and thread cutting - Nomenclature of the main types and terminology (ISO 5967:1981)
23/7/1992 - PDF - Inglés -
Más información121,00 € -
NBN EN 22568:1992
Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
23/7/1992 - PDF - Francés -
Más información58,00 € -
NBN EN 25967:1992
Taps and thread cutting - Nomenclature of the main types and terminology (ISO 5967:1981)
23/7/1992 - PDF - Francés -
Más información121,00 € -
37,00 €
-
NBN EN 22857:1992
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
23/7/1992 - PDF - Holandés -
Más información89,00 € -
ISO 8830:1991 (R2018)
High-speed steel machine taps with ground threads
Technical specifications
17/10/1991 - Papel - Inglés -
Más información48,00 € -
ISO 8830:1991 (R2018)
High-speed steel machine taps with ground threads
Technical specifications
17/10/1991 - Papel - Francés -
Más información48,00 € -
UNE 16603:1991 (R2012)
TAPS AND THREAD CUTTING. NOMENCLATURE OF THE MAIN TYPES AND TERMINOLOGY.
10/1/1991 - PDF - Inglés -
Más información81,60 € -
UNE 16606:1991 (R2012)
HAND AND MACHINES OPERATED CIRCULAR SCREWING DIES AND HAND OPERATED DIE STOCKS.
10/1/1991 - PDF - Español -
Más información63,00 € -
UNE 16605:1991 (R2012)
GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
10/1/1991 - PDF - Español -
Más información70,00 € -
34,00 €
-
UNE 16606:1991 (R2012)
HAND AND MACHINES OPERATED CIRCULAR SCREWING DIES AND HAND OPERATED DIE STOCKS.
10/1/1991 - PDF - Inglés -
Más información75,60 € -
UNE 16603:1991 (R2012)
TAPS AND THREAD CUTTING. NOMENCLATURE OF THE MAIN TYPES AND TERMINOLOGY.
10/1/1991 - PDF - Español -
Más información68,00 € -
UNE 16605:1991 (R2012)
GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
10/1/1991 - PDF - Inglés -
Más información84,00 € -
40,80 €
-
ISO 5969:1979/Cor 1:1991
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
1/1/1991 - Papel - Francés -
Más información0,00 € -
ISO 5969:1979/Cor 1:1991
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
1/1/1991 - Papel - Inglés -
Más información0,00 € -
ISO 2857:1973/Cor 1:1990
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
12/10/1990 - Papel - Inglés -
Más información0,00 € -
DIN EN 25967:1990-07
Taps for thread cutting, nomenclature of the main types and terminology (ISO 5967:1981), german version EN 25967:1989
1/7/1990 - PDF - Inglés -
Más información107,48 € -
DIN EN 22857:1990-07
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches, manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986), german version EN 22857:1989
1/7/1990 - PDF - Alemán -
Más información85,79 € -
DIN EN 25968:1990-07
Circular screwing dies, terminology (ISO 5968:1981), german version EN 25968:1989
1/7/1990 - PDF - Inglés, Francés, Alemán -
Más información52,90 € -
DIN EN 25967:1990-07
Taps for thread cutting, nomenclature of the main types and terminology (ISO 5967:1981), german version EN 25967:1989
1/7/1990 - PDF - Inglés, Francés, Alemán -
Más información85,79 € -
DIN EN 25968:1990-07
Circular screwing dies, terminology (ISO 5968:1981), german version EN 25968:1989
1/7/1990 - PDF - Inglés -
Más información66,07 € -
250,00 €
-
BS 1127-5:1990
Screwing dies and dienuts. Specification for dimensions of hexagon dienuts
29/6/1990 - PDF - Inglés -
Más información151,00 € -
BS 1127-1:1990
Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
29/6/1990 - PDF - Inglés -
Más información180,00 € -
BS 949-4:1990
Screwing taps. Specification for metric ground thread taps: manufacturing tolerances
29/6/1990 - PDF - Inglés -
Más información250,00 € -
BS 1127-4:1990
Screwing dies and dienuts. Terminology for circular screwing dies
29/6/1990 - PDF - Inglés -
Más información151,00 € -
DIN EN 22568:1990-06
Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988), german version EN 22568:1989
1/6/1990 - PDF - Alemán -
Más información79,72 € -
DIN EN 22568:1990-06
Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988), german version EN 22568:1989
1/6/1990 - PDF - Inglés -
Más información99,44 € -
ISO 2568:1988 (R2023)
Hand- and machine-operated circular screwing dies and hand-operated die stocks
General information
24/11/1988 - Papel - Francés -
Más información72,00 € -
ISO 2568:1988 (R2023)
Hand- and machine-operated circular screwing dies and hand-operated die stocks
General information
24/11/1988 - Papel - Inglés -
Más información72,00 € -
48,00 €
-
48,00 €
-
DIN 40434:1987-09
Circular screwing dies for steel conduit thread, Pg 7 to Pg 48
1/9/1987 - PDF - Alemán -
Más información39,35 € -
ISO 2857:1973/Amd 2:1986
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
25/9/1986 - Papel - Inglés -
Más información21,00 € -
ISO 2857:1973/Amd 2:1986
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
25/9/1986 - Papel - Francés -
Más información21,00 € -
34,67 €
-
ISO 2857:1973/Amd 1:1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
1/7/1984 - Papel - Francés -
Más información21,00 € -
ISO 2857:1973/Amd 1:1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
1/7/1984 - Papel - Inglés -
Más información21,00 € -
ISO 5407:1981 (R2019)
As-sintered hardmetal pellets used in heading dies
Dimensions and tolerances
1/10/1981 - Papel - Francés -
Más información48,00 € -
ISO 5407:1981 (R2019)
As-sintered hardmetal pellets used in heading dies
Dimensions and tolerances
1/10/1981 - Papel - Inglés -
Más información48,00 € -
ISO 5969:1979 (R2022)
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
1/10/1979 - Papel - Inglés -
Más información72,00 € -
ISO 5969:1979 (R2022)
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
1/10/1979 - Papel - Francés -
Más información72,00 € -
22,99 €
-
28,60 €
-
BS 1813:1974
Specification for dimensions of conduit dies, diestocks and guides
17/5/1974 - PDF - Inglés -
Más información151,00 € -
ISO 2857:1973 (R2022)
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
1/12/1973 - Papel - Francés -
Más información110,00 € -
ISO 2857:1973 (R2022)
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
1/12/1973 - Papel - Inglés -
Más información110,00 € -
BS 3409-2:1966 (R2013)
Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) Diameters below ¼ in
31/1/1966 - PDF - Inglés -
Más información151,00 € -
BS 3409-1:1961 (R2013)
Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) Diameters ¼ in over
16/8/1961 - PDF - Inglés -
Más información180,00 €