25.080.10 : Tornos
-
DIN EN ISO 23125-1:2023-12
Machine tools safety - Turning machines - Part 1: Safety requirements (ISO/DIS 23125-1:2023), German and English version prEN ISO 23125-1:2023
1/12/2023 - PDF - Inglés, Alemán -
Más información216,26 € -
PR NF EN ISO 23125-1, E60-406-1PR (09/2023)
Sécurité des machines outils - Machines de tournage - Partie 1 : Exigences de sécurité
1/9/2023 - Papel - Inglés, Francés -
Más información188,50 € -
NBN ISO 13041-1:2021
Test conditions for numerically controlled turning machines and turning centres ? Part 1: Geometric tests for machines with horizontal workholding spindle(s)
7/6/2021 - PDF - Francés -
Más información163,00 € -
NBN ISO 13041-1:2021
Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with horizontal workholding spindle(s) ISO 13041-1:2020
7/6/2021 - PDF - Inglés -
Más información163,00 € -
DIN EN ISO 23125 Berichtigung 1:2016-08
Machine tools - Safety - Turning machines (ISO 23125:2015), German version EN ISO 23125:2015, Corrigendum to DIN EN ISO 23125:2015-04
1/8/2016 - PDF - Alemán -
Más información0,00 € -
DIN EN ISO 23125 Berichtigung 1:2016-08
Machine tools - Safety - Turning machines (ISO 23125:2015), German version EN ISO 23125:2015, Corrigendum to DIN EN ISO 23125:2015-04
1/8/2016 - PDF - Inglés -
Más información0,00 € -
NF ISO 13041-5, E60-160-5 (09/2015)
Test conditions for numerically controlled turning machines and turning centres - Part 5 : accuracy of speeds and interpolations
1/9/2015 - Papel - Francés -
Más información108,00 € -
UNE-EN ISO 23125:2015
Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
24/6/2015 - PDF - Español -
Más información126,00 € -
UNE-EN ISO 23125:2015
Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
24/6/2015 - PDF - Inglés -
Más información151,20 € -
154,67 €
-
DIN EN ISO 23125:2015-04
Machine tools - Safety - Turning machines (ISO 23125:2015), German version EN ISO 23125:2015
1/4/2015 - PDF - Alemán -
Más información169,25 € -
DIN EN ISO 23125:2015-04
Machine tools - Safety - Turning machines (ISO 23125:2015), German version EN ISO 23125:2015
1/4/2015 - PDF - Inglés -
Más información211,50 € -
55,77 €
-
45,98 €
-
46,02 €
-
96,00 €
-
UNE-ISO 1708:2012 (R2022)
Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy
26/9/2012 - PDF - Español -
Más información60,00 € -
UNE 15330:2008
Underfloor wheel lathe for the reprofiling of railway wheels. Test conditions. Testing of the accuracy.
29/10/2008 - PDF - Español -
Más información74,00 € -
JIS C 9029-2-6:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply
20/4/2006 - PDF - Japonés -
Más información25,00 € -
JIS B 6131:2004 (R2013)
Machine tools - Lathe tool posts - Overall internal height
20/4/2004 - PDF - Japonés -
Más información25,00 € -
BS ISO 6155:1998
Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
15/6/1998 - PDF - Inglés -
Más información293,00 € -
NF ISO 298, E62-105 (05/1997)
Machine tools. Lathe centres. Sizes for interchangeability. - Machines-outils
1/5/1997 - Papel - Francés -
Más información60,50 € -
UNE 15404:1997
MACHINE TOOLS. LATHE CENTRES. SIZES FOR INTERCHANGEABILITY.
20/3/1997 - PDF - Español -
Más información17,00 € -
UNE 15403:1994
MACHINE TOOLS. LATHE TOOL POSTS. OVERALL INTERNAL HEIGHT.
17/3/1994 - PDF - Español -
Más información14,00 € -
UNE 15329:1993 (R2021)
ACCEPTANCE CONDITIONS FOR COPYING ATTACHMENTS, INTEGRAL OR OTHERWISE, FOR LATHES. TESTING OF ACCURACY.
1/3/1993 - PDF - Español -
Más información53,00 € -
UNE 15322:1992 (R2022)
ACCEPTANCE CONDITIONS FOR VERTICAL TURNING AND BORING LATHES WITH ONE OR TWO COLUMNS AND A SINGLE FIXED OR MOVABLE TABLE. GENERAL INTRODUCTION AND TESTING OF THE ACCURACY.
13/5/1992 - PDF - Español -
Más información68,00 € -
ISO 1708:1989 (R2022)
Acceptance conditions for general purpose parallel lathes
Testing of the accuracy
19/10/1989 - Papel - Inglés -
Más información110,00 € -
ISO 1708:1989 (R2022)
Acceptance conditions for general purpose parallel lathes
Testing of the accuracy
19/10/1989 - Papel - Francés -
Más información110,00 € -
BS 4656-2:1988
Accuracy of machine tools and methods of test. Specification for copying lathes and copying attachments
30/12/1988 - PDF - Inglés -
Más información151,00 € -
BS 4656-28:1988
Accuracy of machine tools and methods of test. Specification for numerically controlled turning machines up to and including 1500 mm turning diameter
31/8/1988 - PDF - Inglés -
Más información250,00 € -
BS 4656-22:1988
Accuracy of machine tools and methods of test. Specification for vertical boring and turning lathes, single and double column types
31/5/1988 - PDF - Inglés -
Más información250,00 € -
BS 4656-35:1987
Accuracy of machine tools and methods of test. Specification for capstan, turret and automatic lathes, single spindle type less than 25 mm diameter capacity
30/11/1987 - PDF - Inglés -
Más información250,00 € -
ISO 8956:1986 (R2021)
Acceptance conditions for copying attachments, integral or otherwise, for lathes
Testing of the accuracy
19/6/1986 - Papel - Francés -
Más información72,00 € -
ISO 8956:1986 (R2021)
Acceptance conditions for copying attachments, integral or otherwise, for lathes
Testing of the accuracy
19/6/1986 - Papel - Inglés -
Más información72,00 € -
ISO 3655:1986 (R2022)
Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table
General introduction and testing of the accuracy
1/5/1986 - Papel - Inglés -
Más información110,00 € -
ISO 3655:1986 (R2022)
Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table
General introduction and testing of the accuracy
1/5/1986 - Papel - Francés -
Más información110,00 € -
DIN 69642:1985-09
Machine tools, modular units, single spindle facing and boring units, constructional sizes
1/9/1985 - PDF - Alemán -
Más información32,34 € -
BS 4656-1:1981
Accuracy of machine tools and methods of test. Specification for lathes, general purpose type
30/9/1981 - PDF - Inglés -
Más información180,00 € -
BS 4656-29:1981
Accuracy of machine tools and methods of test. Specification for automatic lathes, multi-spindle (indexing drum) type
30/9/1981 - PDF - Inglés -
Más información180,00 € -
DIN 8605:1976-06
Machine Tools, Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions
1/6/1976 - PDF - Alemán -
Más información39,35 € -
DIN 8607:1976-06
Machine Tools, Lathes of Normal Accuracy, Swing above 800 up to 1600 mm, Acceptance Conditions
1/6/1976 - PDF - Inglés -
Más información49,16 € -
DIN 8606:1976-06
Machine Tools, Lathes of Normal Accuracy, Swing up to 800 mm, Acceptance Conditions
1/6/1976 - PDF - Inglés -
Más información49,16 € -
DIN 8605:1976-06
Machine Tools, Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions
1/6/1976 - PDF - Inglés -
Más información49,16 € -
DIN 8607:1976-06
Machine Tools, Lathes of Normal Accuracy, Swing above 800 up to 1600 mm, Acceptance Conditions
1/6/1976 - PDF - Alemán -
Más información39,35 € -
DIN 8606:1976-06
Machine Tools, Lathes of Normal Accuracy, Swing up to 800 mm, Acceptance Conditions
1/6/1976 - PDF - Alemán -
Más información39,35 € -
48,00 €
-
48,00 €
-
BS 4442-1:1969
Specification for lathe spindle noses and faceplates. Types 'A' and 'Camlock'
31/3/1969 - PDF - Inglés -
Más información180,00 € -
17,00 €
-
17,00 €
-
17,00 €
-
17,00 €
-
UNE 15402-1:1967
LATHES. TERMS AND EQUIVALENCES. SPANISH-FRENCH-ENGLISH-GERMAN-ITALIAN.
15/1/1967 - PDF - Español -
Más información39,00 €