25.060.10 : Unidades modulares y otros dispositivos
-
BS ISO 9182-4:2023 + Redline
Tracked Changes. Tools for pressing. Guide pillars Type C, with taper lead and bush
7/9/2023 - PDF DRM - Inglés - BSI
Más información232,00 € -
BS ISO 9182-2:2023 + Redline
Tracked Changes. Tools for pressing. Guide pillars Type A, straight
7/9/2023 - PDF DRM - Inglés - BSI
Más información232,00 € -
BS ISO 9182-1:2023 + Redline
Tracked Changes. Tools for pressing. Guide pillars Types
6/9/2023 - PDF DRM - Inglés - BSI
Más información232,00 € -
BS ISO 9182-5:2023 + Redline
Tracked Changes. Tools for pressing. Guide pillars Type D, end-locking with flange
6/9/2023 - PDF DRM - Inglés - BSI
Más información232,00 € -
BS ISO 9182-4:2023
Tools for pressing. Guide pillars Type C, with taper lead and bush
22/8/2023 - PDF DRM - Inglés - BSI
Más información165,00 € -
BS ISO 9182-2:2023
Tools for pressing. Guide pillars Type A, straight
22/8/2023 - PDF DRM - Inglés - BSI
Más información165,00 € -
BS ISO 9182-5:2023
Tools for pressing. Guide pillars Type D, end-locking with flange
16/8/2023 - PDF DRM - Inglés - BSI
Más información165,00 € -
165,00 €
-
112,85 €
-
22/30441942 DC:2022
BS ISO 9182-4. Tools for pressing. Guide pillars Part 4. Type C, with taper lead and bush
30/8/2022 - PDF DRM - Inglés - BSI
Más información23,00 € -
22/30442026 DC:2022
BS ISO 9182-1. Tools for pressing. Guide pillars Part 1. Types
17/8/2022 - PDF DRM - Inglés - BSI
Más información23,00 € -
41,78 €
-
56,17 €
-
VDI 3356:2017-03
Guide pillars with lead-in chamfer in large stamping dies - Supplement to DIN 9833 und ISO 9182-3
1/3/2017 - PDF - Inglés, Alemán - VDI
Más información51,99 € -
34,30 €
-
DIN 9831-1:2013-01
Tools for pressing - Guide bushes for press tool sets - Part 1: Type AG, Type BG and Type CG, gliding bushes
1/1/2013 - PDF - Alemán - DIN
Más información48,79 € -
DIN 9831-2:2013-01
Tools for pressing - Guide bushes for press tool sets - Part 2: Type AW, Type BW and Type CW, ball cage bushes
1/1/2013 - PDF - Alemán - DIN
Más información48,79 € -
41,78 €
-
DIN 69010:2011-11
Transfer centers - Interface machine frame - Multi spindle heads and other modular units, Frame sizes and dimensions
1/11/2011 - PDF - Alemán - DIN
Más información84,58 € -
DIN ISO 11900-1:2011-10
Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
1/10/2011 - PDF - Alemán - DIN
Más información48,79 € -
DIN ISO 11900-1:2011-10
Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
1/10/2011 - PDF - Inglés - DIN
Más información61,12 € -
DIN ISO 11900-2:2011-10
Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008)
1/10/2011 - PDF - Alemán - DIN
Más información48,79 € -
DIN ISO 11900-2:2011-10
Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008)
1/10/2011 - PDF - Inglés - DIN
Más información61,12 € -
DIN ISO 16367:2010-09
Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
1/9/2010 - PDF - Alemán - DIN
Más información48,79 € -
DIN ISO 16367:2010-09
Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
1/9/2010 - PDF - Inglés - DIN
Más información61,12 € -
24,39 €
-
41,78 €
-
41,78 €
-
41,78 €
-
DIN 16760-1:2008-06
Tools for moulding - Part 1: Machined, undrilled plates
1/6/2008 - PDF - Alemán - DIN
Más información63,27 € -
NF ISO 299, E21-301 (02/2006)
Machine tool tables - T-slots and corresponding bolts - Tables de machines-outils
1/2/2006 - PDF - Francés - AFNOR
Más información28,00 € -
41,78 €
-
52,15 €
-
41,78 €
-
41,78 €
-
41,78 €
-
52,15 €
-
41,78 €
-
UNE 15219-1:1992 (R2021)
MODULAR UNITS FOR MACHINES TOOLS. WORKHOLDING PALLETS. PART 1: WORKHOLDING PALLETS UP TO 800 MM NOMINAL SIZE
30/12/1992 - PDF - Español - AENOR
Más información61,00 € -
UNE 15219-2:1992 (R2021)
MODULAR UNITS FOR MACHINES TOOLS. WORKHOLDING PALLETS. PART 2: WORKHOLDING PALLETS OF NOMINAL SIZE GREATER THAN 800 mm.
30/12/1992 - PDF - Español - AENOR
Más información62,00 € -
UNE 15416:1992
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE NOSES AND ADJUSTABLE ADAPTORS FOR MULTI-SPINDLE HEADS.
8/7/1992 - PDF - Español - AENOR
Más información28,00 € -
UNE 15417:1992
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. INTEGRAL WAY COLUMNS. FLOOR-MOUNTED TYPE.
8/7/1992 - PDF - Español - AENOR
Más información15,00 € -
ISO 8526-2:1990/Cor 1:1992
Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm
Technical Corrigendum 1
2/7/1992 - PDF - Inglés - ISO
Más información0,00 € -
DIN 69056-1:1992-01
Machine tools, slideways, dimensions of rectangular profile, type A, technical delivery conditions
1/1/1992 - PDF - Alemán - DIN
Más información56,17 € -
UNE 15208:1991
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. HEADSTOCKS.
23/1/1991 - PDF - Español - AENOR
Más información17,00 € -
UNE 15209:1991
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTISRINDLE HEADS FLANGES FOR MOUNTING AND TENON DRIVE.
10/1/1991 - PDF - Español - AENOR
Más información15,00 € -
UNE 15215:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. DRILLING UNITS WITH SLIDING SLEEVE AND MOVABLE SUPPORT.
10/12/1990 - PDF - Español - AENOR
Más información15,00 € -
UNE 15216:1990 (R2021)
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SUPPORT BRACKETS.
10/12/1990 - PDF - Español - AENOR
Más información15,00 € -
BS 6101-6:1990
Machine tool ball screws. Specification for ball nuts and principal dimensions of ball screws
30/11/1990 - PDF DRM - Inglés - BSI
Más información165,00 € -
UNE 15205:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. COLUMNS
22/11/1990 - PDF - Español - AENOR
Más información15,00 € -
UNE 15206:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. INTEGRAL WAY COLUMNS.
22/11/1990 - PDF - Español - AENOR
Más información15,00 € -
UNE 15207:1990 (R2021)
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. CASING AND IMPUT DRIVESHAFT DIMENSIONS.
22/11/1990 - PDF - Español - AENOR
Más información17,00 € -
UNE 15202:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. WING BASES FOR SLIDE UNITS.
13/11/1990 - PDF - Español - AENOR
Más información15,00 € -
UNE 15203:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. WING BASES FOR COLUMNS.
13/11/1990 - PDF - Español - AENOR
Más información15,00 € -
UNE 15204:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. CENTRE BASES.
13/11/1990 - PDF - Español - AENOR
Más información15,00 € -
UNE 15214:1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. DRILLING UNITS WITH SLIDING SLEEVE.
13/11/1990 - PDF - Español - AENOR
Más información15,00 € -
ISO 8526-1:1990 (R2021)
Modular units for machine tools — Workholding pallets
Part 1: Workholding pallets up to 800 mm nominal size
23/8/1990 - - - ISO
Más información115,00 € -
ISO 8526-2:1990 (R2021)
Modular units for machine tools — Workholding pallets
Part 2: Workholding pallets of nominal size greater than 800 mm
23/8/1990 - - - ISO
Más información115,00 € -
34,30 €
-
34,30 €
-
DIN 6357:1988-07
Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment
1/7/1988 - PDF - Alemán - DIN
Más información41,78 € -
DIN 55201-2:1987-12
Machine tools, pallets for machine tools, nominal sizes over 800 mm, form B
1/12/1987 - PDF - Alemán - DIN
Más información41,78 € -
ISO 2905:1985 (R2023)
Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
28/11/1985 - - - ISO
Más información51,00 € -
DIN 55201-1:1985-09
Machine tools, pallets for machine tools, nominal sizes up to 800 mm, form A
1/9/1985 - PDF - Alemán - DIN
Más información41,78 € -
DIN 69522:1985-09
Machine tools, modular units, wing bases for columns, constructional sizes
1/9/1985 - PDF - Alemán - DIN
Más información34,30 € -
DIN 69523:1985-09
Machine tools, modular units, wing bases for slide units, constructional sizes
1/9/1985 - PDF - Alemán - DIN
Más información34,30 € -
UNE 15201:1985 (R2021)
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SLIDE UNITS.
15/3/1985 - PDF - Español - AENOR
Más información18,00 € -
UNE 15211:1985
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE UNITS.
15/3/1985 - PDF - Español - AENOR
Más información15,00 € -
UNE 15210:1984 (R2021)
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. ROTARY TABLES AND MULTI-SIDED CENTRE BASES FOR ROTARY TABLES.
15/12/1984 - PDF - Español - AENOR
Más información18,00 € -
UNE 15212:1984
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE UNITS.
15/12/1984 - PDF - Español - AENOR
Más información15,00 € -
UNE 15213:1984
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE UNITS.
15/12/1984 - PDF - Español - AENOR
Más información15,00 € -
ISO 3589:1975/Amd 1:1982
Modular units for machine tool construction — Integral way columns
Amendment 1
1/6/1982 - - - ISO
Más información21,00 € -
ISO 2562:1973/Amd 1:1982
Modular units for machine tool construction — Slide units
Amendment 1
1/6/1982 - - - ISO
Más información21,00 € -
ISO 2912:1973/Amd 1:1982
Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions
Amendment 1
1/6/1982 - - - ISO
Más información21,00 € -
ISO 3970:1977/Amd 1:1982
Modular units for machine tool construction — Integral way columns — Floor-mounted type
Amendment 1
1/6/1982 - - - ISO
Más información21,00 € -
41,78 €
-
41,78 €
-
DIN 9816:1981-12
Centre post press tool sets with thick top tool holder
1/12/1981 - PDF - Alemán - DIN
Más información41,78 € -
41,78 €
-
41,78 €
-
BS 6101-1:1981
Machine tool ball screws. Methods of calculating dynamic and static load and life ratings
31/7/1981 - PDF DRM - Inglés - BSI
Más información165,00 € -
DIN 69513:1979-02
Machine tools, modular units, multi-sided centre bases for rotary tables, constructional sizes
1/2/1979 - PDF - Alemán - DIN
Más información24,39 € -
DIN 69521:1979-02
Machine Tools, Modular Units, Centre Bases for Longitudinal Cycle Machines, Constructional Sizes
1/2/1979 - PDF - Alemán - DIN
Más información24,39 € -
DIN 69521:1979-02
Machine Tools, Modular Units, Centre Bases for Longitudinal Cycle Machines, Constructional Sizes
1/2/1979 - PDF - Inglés - DIN
Más información30,37 € -
DIN 69524:1979-01
Machine Tools, Modular Units, Support Brackets, Constructural Sizes
1/1/1979 - PDF - Alemán - DIN
Más información24,39 € -
DIN 69524:1979-01
Machine Tools, Modular Units, Support Brackets, Constructural Sizes
1/1/1979 - PDF - Inglés - DIN
Más información30,37 € -
ISO 2891:1977 (R2023)
Modular units for machine tool construction — Centre bases and columns
1/10/1977 - - - ISO
Más información51,00 € -
DIN 803:1977-03
Machine Tools, Feeds for Machine Tools, Nominal Values, Limiting Values, Transmission Ratios
1/3/1977 - PDF - Alemán - DIN
Más información24,39 € -
DIN 803:1977-03
Machine Tools, Feeds for Machine Tools, Nominal Values, Limiting Values, Transmission Ratios
1/3/1977 - PDF - Inglés - DIN
Más información30,37 € -
DIN 804:1977-03
Machine Tools, On-load Speeds for Machine Tools, Nominal Values, Limiting Values, Transmission Ratios
1/3/1977 - PDF - Alemán - DIN
Más información24,39 € -
DIN 804:1977-03
Machine Tools, On-load Speeds for Machine Tools, Nominal Values, Limiting Values, Transmission Ratios
1/3/1977 - PDF - Inglés - DIN
Más información30,37 € -
ISO 3970:1977 (R2023)
Modular units for machine tool construction — Integral way columns — Floor-mounted type
1/3/1977 - - - ISO
Más información51,00 € -
51,00 €
-
51,00 €
-
ISO 3589:1975 (R2023)
Modular units for machine tool construction — Integral way columns
1/9/1975 - - - ISO
Más información51,00 € -
ISO 3371:1975 (R2021)
Modular units for machine tool construction — Rotary tables and multi-sided centre bases for rotary tables
1/9/1975 - - - ISO
Más información51,00 € -
ISO 3476:1975 (R2023)
Modular units for machine tool construction — Tenon drive and flanges for mounting multi- spindle heads
1/7/1975 - - - ISO
Más información51,00 € -
BS 3884-1:1974
Modular units for machine tools. Specification for basic units
22/4/1974 - PDF DRM - Inglés - BSI
Más información316,00 € -
ISO 2934:1973 (R2023)
Modular units for machine tool construction — Wing base for columns
1/12/1973 - - - ISO
Más información51,00 € -
ISO 2912:1973 (R2021)
Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions
1/12/1973 - - - ISO
Más información51,00 € -
51,00 €
-
ISO 2769:1973 (R2023)
Modular units for machine tool construction — Wing bases for slide units
1/5/1973 - - - ISO
Más información51,00 € -
51,00 €
