25.040.10 : Centros de mecanizado
-
NBN ISO 10791-2:2023
Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis)
22/9/2023 - PDF - Francés - NBN
Más información205,00 € -
NBN ISO 10791-2:2023
Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis)
22/9/2023 - PDF - Inglés - NBN
Más información205,00 € -
BS ISO 10791-2:2023 + Redline
Tracked Changes. Test conditions for machining centres Geometric tests machines with vertical spindle (vertical Z-axis)
8/6/2023 - PDF - Inglés - BSI
Más información586,00 € -
BS ISO 10791-2:2023
Test conditions for machining centres Geometric tests machines with vertical spindle (vertical Z-axis)
7/6/2023 - PDF - Inglés - BSI
Más información449,00 € -
NF ISO 10791-2, E60-172-2 (06/2023)
Conditions d'essai pour centres d'usinage - Partie 2 : essais géométriques des machines à broche verticale (axe Z vertical)
1/6/2023 - PDF - Francés - AFNOR
Más información207,67 € -
ISO 10791-2:2023
Test conditions for machining centres
Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis)
21/4/2023 - - - ISO
Más información261,00 € -
NBN ISO 10791-10:2023
Test conditions for machining centres — Part 10: Evaluation of thermal distortions
6/2/2023 - PDF - Francés - NBN
Más información163,00 € -
NBN ISO 10791-10:2023
Test conditions for machining centres — Part 10: Evaluation of thermal distortions
6/2/2023 - PDF - Inglés - NBN
Más información163,00 € -
NF ISO 10791-10, E60-172-10 (12/2022)
Test conditions for machining centres - Part 10 : Evaluation of thermal distortions
1/12/2022 - PDF - Francés - AFNOR
Más información128,67 € -
BS ISO 10791-10:2022
Test conditions for machining centres Evaluation of thermal distortions
31/10/2022 - PDF DRM - Inglés - BSI
Más información374,00 € -
BS ISO 10791-10:2022 + Redline
Tracked Changes. Test conditions for machining centres Evaluation of thermal distortions
13/10/2022 - PDF DRM - Inglés - BSI
Más información524,00 € -
ISO 10791-10:2022
Test conditions for machining centres
Part 10: Evaluation of thermal distortions
22/9/2022 - - - ISO
Más información208,00 € -
NBN ISO 10791-7:2021
Test conditions for machining centres — Part 7: Accuracy of finished test pieces
7/6/2021 - - - NBN
Más información163,00 € -
NBN ISO 17543-1:2021
Machine tools — Test conditions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)
7/6/2021 - - - NBN
Más información163,00 € -
NBN ISO 10791-7:2021
Test conditions for machining centres — Part 7: Accuracy of finished test pieces
7/6/2021 - - - NBN
Más información163,00 € -
NF ISO 10791-7, E60-172-7 (06/2020)
Test conditions for machining centres - Part 7 : accuracy of finished test pieces
1/6/2020 - PDF - Francés - AFNOR
Más información128,67 € -
BS ISO 17543-1:2020
Machine tools. Test conditions for universal spindle heads Accessory machines with horizontal (horizontal Z-axis)
15/4/2020 - PDF DRM - Inglés - BSI
Más información374,00 € -
ISO 17543-1:2020 (R2025)
Machine tools — Test conditions for universal spindle heads
Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)
31/3/2020 - - - ISO
Más información208,00 € -
BS ISO 10791-1:2015 + Redline
Tracked Changes. Test conditions for machining centres Geometric tests machines with horizontal spindle (horizontal Z-axis)
26/2/2020 - PDF - Inglés - BSI
Más información492,00 € -
BS ISO 10791-7:2020
Test conditions for machining centres Accuracy of finished test pieces
6/2/2020 - PDF DRM - Inglés - BSI
Más información374,00 € -
ISO 10791-7:2020 (R2025)
Test conditions for machining centres
Part 7: Accuracy of finished test pieces
29/1/2020 - - - ISO
Más información208,00 € -
16/30327831 DC:2016
BS ISO 10791-7 AMD1. Test conditions for machining centres. Part 7. Accuracy of finished test pieces
29/9/2016 - PDF DRM - Inglés - BSI
Más información23,00 € -
NF ISO 10791-1, E60-172-1 (03/2016)
Test conditions for machining centres - Part 1 : geometric tests for machines with horizontal spindle (horizontal Z-axis)
1/3/2016 - PDF - Francés - AFNOR
Más información167,33 € -
UNE-EN ISO 11064-4:2013
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) (Endorsed by AENOR in April of 2015.)
1/4/2015 - PDF - Inglés - AENOR
Más información76,00 € -
BS ISO 10791-1:2015
Test conditions for machining centres. Geometric tests for machines with horizontal spindle (horizontal Z-axis)
28/2/2015 - PDF - Inglés - BSI
Más información377,00 € -
BS ISO 10791-6:2014
Test conditions for machining centres. Accuracy of speeds and interpolations
31/1/2015 - PDF - Inglés - BSI
Más información348,00 € -
ISO 10791-1:2015 (R2023)
Test conditions for machining centres
Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
21/1/2015 - - - ISO
Más información261,00 € -
ISO 10791-6:2014 (R2020)
Test conditions for machining centres
Part 6: Accuracy of speeds and interpolations
5/12/2014 - - - ISO
Más información208,00 € -
UNE-EN ISO 11064-5:2008
Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) (Endorsed by AENOR in December of 2009.)
1/12/2009 - PDF - Inglés - AENOR
Más información88,00 € -
NF ISO 10791-4, E60-172-4 (03/2006)
Test conditions for machining centres. Part 4 : accuracy and repetability of positioning of linear and rotary axes.
1/3/2006 - PDF - Francés - AFNOR
Más información52,00 € -
ASME B5.54-2005 (R2020)
Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers
25/3/2005 - Papier - Inglés - ASME
Más información115,00 € -
UNE 15450-2:2004
Machine-tools. Test conditions for machining centres. Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z axis).
12/3/2004 - PDF - Español - AENOR
Más información92,00 € -
UNE 15450-8:2003 ERRATUM
Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
21/11/2003 - PDF - Español - AENOR
Más información0,00 € -
UNE 15450-9:2003
Machine-tools. Test conditions for machining centres. Part 9: Evaluation of the operating times of tool change and pallet change.
31/10/2003 - PDF - Español - AENOR
Más información61,00 € -
BS ISO 10791-8:2001
Test conditions for machining centres Evaluation of contouring performance in the three coordinate planes
15/6/2001 - PDF DRM - Inglés - BSI
Más información165,00 € -
NF ISO 10791-8, E60-172-8 (06/2001)
Test conditions for machining centres - Part 8 : evaluation of the contouring performance in the three coordinate planes
1/6/2001 - PDF - Francés - AFNOR
Más información37,33 € -
BS ISO 10791-9:2001
Test conditions for machining centres Evaluation of the operating times tool change and pallet
15/5/2001 - PDF DRM - Inglés - BSI
Más información269,00 € -
UNE 15450-8:2001
Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
29/3/2001 - PDF - Español - AENOR
Más información53,00 € -
ISO 10791-8:2001 (R2023)
Test conditions for machining centres
Part 8: Evaluation of contouring performance in the three coordinate planes
29/3/2001 - - - ISO
Más información51,00 € -
ISO 10791-9:2001 (R2023)
Test conditions for machining centres
Part 9: Evaluation of the operating times of tool change and pallet change
15/3/2001 - - - ISO
Más información115,00 € -
NBN EN ISO 11064-2:2001
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
6/2/2001 - PDF - Francés - NBN
Más información92,00 € -
NBN EN ISO 11064-2:2001
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
6/2/2001 - PDF - Alemán - NBN
Más información92,00 € -
NBN EN ISO 11064-2:2001
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
6/2/2001 - PDF - Inglés - NBN
Más información92,00 € -
NBN EN ISO 11064-1:2001
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
6/2/2001 - PDF - Francés - NBN
Más información145,00 € -
NBN EN ISO 11064-1:2001
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
6/2/2001 - PDF - Alemán - NBN
Más información145,00 € -
NBN EN ISO 11064-1:2001
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
6/2/2001 - PDF - Inglés - NBN
Más información145,00 € -
DIN ISO 10791-4:2001-01
Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
1/1/2001 - PDF - Alemán - DIN
Más información48,79 € -
DIN ISO 10791-4:2001-01
Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
1/1/2001 - PDF - Inglés - DIN
Más información61,12 € -
DIN ISO 10791-3:2001-01
Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998)
1/1/2001 - PDF - Alemán - DIN
Más información116,64 € -
DIN ISO 10791-3:2001-01
Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998)
1/1/2001 - PDF - Inglés - DIN
Más información146,26 € -
UNE 15450-5:2000
Machine-tools. Test conditions of machining centres. Part 5: Accuracy and repeatability of positioning of working-holding pallets.
10/11/2000 - PDF - Español - AENOR
Más información54,00 € -
UNE 15450-1:2000
Machine-tools. Test conditions of machining centres. Part 1: Geometric test for machines with horizontal spindle and with accessory heads (horizontal Z axis).
30/9/2000 - PDF - Español - AENOR
Más información107,00 € -
UNE 15450-3:2000
Machine-tools. Test conditions of machining centres. Part 3: Geometric test for machines with integral indexable or continuous universal heads (horizontal Z axis).
30/9/2000 - PDF - Español - AENOR
Más información100,00 € -
UNE 15450-4:2000
Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.
21/9/2000 - PDF - Español - AENOR
Más información53,00 € -
ISO 10791-3:1998/Cor 1:1999
Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
Technical Corrigendum 1
11/11/1999 - PDF - Inglés - ISO
Más información0,00 € -
NF ISO 10791-3, E60-172-3 (04/1999)
Test conditions for machining centres. Part 3 : geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis).
1/4/1999 - PDF - Francés - AFNOR
Más información128,67 € -
BS ISO 10791-3:1998
Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
15/3/1999 - PDF - Inglés - BSI
Más información348,00 € -
IEC TR 60877:1999
IEC TR 60877:1999 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
7/1/1999 - PDF - Inglés, Francés - IEC
Más información93,00 € -
ISO 10791-3:1998 (R2025)
Test conditions for machining centres
Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
20/12/1998 - - - ISO
Más información208,00 € -
BS ISO 10791-4:1998
Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes
15/8/1998 - PDF - Inglés - BSI
Más información151,00 € -
NF ISO 10791-5, E60-172-5 (08/1998)
Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.
1/8/1998 - PDF - Francés - AFNOR
Más información52,00 € -
ISO 10791-4:1998 (R2025)
Test conditions for machining centres
Part 4: Accuracy and repeatability of positioning of linear and rotary axes
18/6/1998 - - - ISO
Más información77,00 € -
BS ISO 10791-5:1998
Test conditions for machining centres. Accuracy and repeatability of positioning of work-holding pallets
15/5/1998 - PDF DRM - Inglés - BSI
Más información193,00 € -
ISO 10791-5:1998 (R2020)
Test conditions for machining centres
Part 5: Accuracy and repeatability of positioning of work-holding pallets
26/2/1998 - - - ISO
Más información77,00 € -
ISO 9524:1993 (R2017)
Machine tools — Front faces of spindle holders for machining centres — Functional dimensions
9/9/1993 - - - ISO
Más información77,00 € -
NF F01-014 (11/1974) (R2009)
Railway transport equipment. Type A and C machining centres for axles.
1/11/1974 - PDF - Francés - AFNOR
Más información28,00 €
