23 : Sistemas y componentes de fluidos de uso general
-
NF EN ISO 14245/A1, M88-729/A1PR (02/2026)
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture automatique - Amendement 1
1/2/2026 - PDF - Francés - AFNOR
Más información59,00 € -
UNE-EN ISO 15493:2004/A11:2026
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series
14/1/2026 - - - AENOR
Más informaciónDe: 50,00 € -
NBN EN ISO 14245:2021/A1:2025
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing - Amendment 1 (ISO 14245:2021/Amd 1:2025)
18/12/2025 - - - NBN
Más información20,00 € -
ISO 14245:2021/Amd 1:2025
Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing
Amendment 1
5/12/2025 - - - ISO
Más información21,00 € -
241,50 €
-
UNE-EN ISO 5801:2019/A1:2025
Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/Amd 1:2025)
22/10/2025 - - - AENOR
Más informaciónDe: 62,00 € -
UNE-EN ISO 7866:2013/A2:2025
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 2 (ISO 7866:2012/Amd 2:2024)
15/10/2025 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 21922:2022/A1:2025
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking - Amendment 1 (ISO 21922:2021/Amd 1:2024)
10/9/2025 - - - AENOR
Más informaciónDe: 60,00 € -
NBN EN ISO 14246:2022/A1:2025
Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2022/Amd 1:2025)
4/9/2025 - - - NBN
Más información20,00 € -
NF EN ISO 14246/A1, E29-694/A1 (09/2025)
Bouteilles à gaz - Robinets de bouteilles à gaz - Essais de fabrication et contrôles - Amendement 1
1/9/2025 - PDF - Francés - AFNOR
Más información37,33 € -
ISO 14246:2022/Amd 1:2025
Gas cylinders — Cylinder valves — Manufacturing tests and examinations
Amendment 1
25/8/2025 - - - ISO
Más información21,00 € -
NF EN IEC 60335-2-34/A12, C73-834/A12 (07/2025)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-34 : exigences particulières pour les motocompresseurs
1/7/2025 - PDF - Francés - AFNOR
Más información150,50 € -
UNE-EN IEC 60335-2-80:2025/A11:2025
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
25/6/2025 - - - AENOR
Más informaciónDe: 69,00 € -
NBN EN ISO 15493:2003/A11:2025
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series
29/5/2025 - - - NBN
Más información20,00 € -
NF EN ISO 15493/A11, T54-947/A11 (05/2025)
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003/Amd 1:2016 + Cor 1:2004) - Systèmes de canalisations en matières plastiques pour les applications industrielles - Acrylonitrile-butadiène-styrène (ABS), poly(chlorure de vinyle) non plastifié (PVC-U) et poly(chlorure de vinyle) chloré (PVC-C) - Spécifications pour les composants et le système - Série métrique (ISO
1/5/2025 - PDF - Francés - AFNOR
Más información28,00 € -
NF EN IEC 60879/A1, C31-879/A1 (05/2025)
Ventilateurs de confort et régulateurs de vitesse pour applications domestiques et analogues - Méthodes de mesure de l'aptitude à la fonction
1/5/2025 - PDF - Francés - AFNOR
Más información59,33 € -
UNE-EN ISO 15995:2021/A1:2025
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/Amd 1:2024)
2/4/2025 - - - AENOR
Más informaciónDe: 69,00 € -
UNE-EN IEC 60335-2-40:2025/A11:2025
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
19/3/2025 - PDF - Español - AENOR
Más información72,00 € -
IEC 60879:2019/AMD1:2025
IEC 60879:2019/AMD1:2025 Amendment 1 - Comfort fans and regulators for household and similar purposes - Methods for measuring performance
17/3/2025 - PDF - Inglés, Francés - IEC
Más información23,00 € -
NBN ISO 16358-1:2013/A1:2025
Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Amendment 1
11/3/2025 - PDF - Inglés - NBN
Más información124,00 € -
NBN ISO 16358-1:2013/A2:2025
Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Amendment 2
11/3/2025 - PDF - Inglés - NBN
Más información20,00 € -
NBN EN ISO 5801:2017/A1:2025
Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/Amd 1:2025)
22/1/2025 - - - NBN
Más información20,00 € -
UNE-EN ISO 18119:2020/A2:2025
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 2 (ISO 18119:2018/Amd 2:2024)
15/1/2025 - - - AENOR
Más informaciónDe: 35,00 € -
ISO 5801:2017/Amd 1:2025
Fans — Performance testing using standardized airways
Amendment 1
10/1/2025 - - - ISO
Más información21,00 € -
NBN EN ISO 7866:2012/A2:2025
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 2 (ISO 7866:2012/Amd 2:2024)
8/1/2025 - - - NBN
Más información20,00 € -
NF EN ISO 7866/A2, E29-743/A2 (01/2025)
Bouteilles à gaz - Bouteilles à gaz sans soudure en alliage d'aluminium destinées à être rechargées - Conception, construction et essais - Amendement 2
1/1/2025 - PDF - Francés - AFNOR
Más información37,33 € -
NF EN ISO 5801/A1, E51-008/A1 (01/2025)
Ventilateurs - Essais aérauliques sur circuits normalisés - Amendement 1
1/1/2025 - PDF - Francés - AFNOR
Más información82,00 € -
ISO 16358-1:2013/Amd 2:2024
Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor
Amendment 2
13/12/2024 - PDF - Inglés - ISO
Más información21,00 € -
ISO 7866:2012/Amd 2:2024
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
Amendment 2
12/12/2024 - - - ISO
Más información21,00 € -
UNE-EN ISO 17871:2021/A1:2024
Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/Amd 1:2024)
11/12/2024 - - - AENOR
Más informaciónDe: 53,00 € -
NF EN ISO 21922/A1, E35-408/A1 (12/2024)
Systèmes de réfrigération et pompes à chaleur - Robinetterie - Exigences, essais et marquage - Amendement 1
1/12/2024 - PDF - Francés - AFNOR
Más información65,50 € -
NF EN IEC 60335-2-80/A11, C73-880/A11 (11/2024)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-80 : exigences particulières pour les ventilateurs
1/11/2024 - PDF - Francés - AFNOR
Más información95,67 € -
NF EN IEC 60335-2-40/A11, C73-840/A11 (11/2024)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : exigences particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
1/11/2024 - PDF - Francés - AFNOR
Más información111,67 € -
UNE-EN IEC 60335-2-51:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
25/9/2024 - - - AENOR
Más informaciónDe: 54,00 € -
NBN EN ISO 15995:2021/A1:2024
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/Amd 1:2024)
4/9/2024 - - - NBN
Más información20,00 € -
NF EN ISO 15995/A1, M88-730/A1 (09/2024)
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture manuelle - Amendement 1
1/9/2024 - PDF - Francés - AFNOR
Más información82,00 € -
ISO 15995:2021/Amd 1:2024
Gas cylinders — Specifications and testing of LPG cylinder valves — Manually operated
Amendment 1
22/8/2024 - - - ISO
Más información21,00 € -
NBN EN ISO 18119:2018/A2:2024
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 2 (ISO 18119:2018/Amd 2:2024)
19/6/2024 - - - NBN
Más información20,00 € -
ISO 18119:2018/Amd 2:2024
Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing
Amendment 2
5/6/2024 - - - ISO
Más información21,00 € -
UNE-EN ISO 10524-1:2019/A1:2024
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/Amd 1:2023)
5/6/2024 - - - AENOR
Más informaciónDe: 35,00 € -
NF EN ISO 18119/A2, E29-755/A2 (06/2024)
Bouteilles à gaz - Bouteilles et tubes à gaz en acier et en alliages d'aluminium, sans soudure - Contrôles et essais périodiques - Amendement 2
1/6/2024 - PDF - Francés - AFNOR
Más información37,33 € -
UNE-EN IEC 63086-1:2020/A1:2024
Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General requirements
8/5/2024 - - - AENOR
Más informaciónDe: 40,00 € -
ISO 21013-1:2021/Amd 1:2024
Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves
Amendment 1
4/5/2024 - PDF - Inglés - ISO
Más información21,00 € -
NBN EN ISO 17871:2020/A1:2024
Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/Amd 1:2024)
24/4/2024 - PDF - Francés - NBN
Más información20,00 € -
NBN EN ISO 17871:2020/A1:2024
Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/Amd 1:2024)
24/4/2024 - PDF - Inglés - NBN
Más información20,00 € -
NBN EN ISO 17871:2020/A1:2024
Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/Amd 1:2024)
24/4/2024 - - - NBN
Más información20,00 € -
UNE-EN ISO 11114-1:2021/A1:2024
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
17/4/2024 - - - AENOR
Más informaciónDe: 58,00 € -
ISO 17871:2020/Amd 1:2024
Gas cylinders — Quick-release cylinder valves — Specification and type testing
Amendment 1
15/4/2024 - - - ISO
Más información21,00 € -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10/4/2024 - - - AENOR
Más informaciónDe: 35,00 € -
NF EN ISO 17871/A1, E29-131/A1 (04/2024)
Bouteilles à gaz - Robinets de bouteilles à ouverture rapide - Spécifications et essais de type - Amendement 1
1/4/2024 - PDF - Francés - AFNOR
Más información52,00 € -
NBN ISO 16494-1:2022/Amd 1:2024
Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance — Amendment 1
29/2/2024 - PDF - Inglés - NBN
Más información20,00 € -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28/2/2024 - - - AENOR
Más informaciónDe: 69,00 € -
ISO 16494-1:2022/Amd 1:2023
Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance
Amendment 1
16/11/2023 - PDF - Inglés - ISO
Más información21,00 € -
UNE-CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
3/11/2023 - PDF - Inglés - AENOR
Más información76,00 € -
NF EN IEC 60335-2-51/A11, C73-851/A11 (11/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-51 : exigences particulières pour les pompes de circulation fixes pour installations de chauffage et de distribution d'eau
1/11/2023 - PDF - Francés - AFNOR
Más información59,33 € -
NF EN ISO 10524-1/A1, S95-159-1/A1 (11/2023)
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres - Amendement 1
1/11/2023 - PDF - Francés - AFNOR
Más información28,00 € -
NBN ISO 11119-3:2020/A1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners — Amendment 1
3/10/2023 - PDF - Inglés - NBN
Más información20,00 € -
NBN EN ISO 11114-1:2020/A1:2023
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
6/9/2023 - PDF - Francés - NBN
Más información20,00 € -
NBN EN ISO 11114-1:2020/A1:2023
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
6/9/2023 - PDF - Alemán - NBN
Más información20,00 € -
NBN EN ISO 11114-1:2020/A1:2023
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023)
6/9/2023 - PDF - Inglés - NBN
Más información20,00 € -
NF EN ISO 11114-1/A1, E29-648-1/A1 (09/2023)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 1 : matériaux métalliques - Amendement 1
1/9/2023 - PDF - Francés - AFNOR
Más información52,00 € -
NBN ISO 11119-2:2020/A1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1
23/8/2023 - PDF - Inglés - NBN
Más información20,00 € -
NBN EN ISO 11363-1:2018/A1:2023
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
16/8/2023 - PDF - Francés - NBN
Más información20,00 € -
NBN EN ISO 11363-1:2018/A1:2023
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
16/8/2023 - PDF - Alemán - NBN
Más información20,00 € -
NBN EN ISO 11363-1:2018/A1:2023
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
16/8/2023 - PDF - Inglés - NBN
Más información20,00 € -
ISO 11363-1:2018/Amd 1:2023
Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications
Amendment 1
9/8/2023 - - - ISO
Más información21,00 € -
NF EN ISO 11363-1/A1, E29-674-1/A1 (08/2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : spécifications - Amendement 1
1/8/2023 - PDF - Francés - AFNOR
Más información28,00 € -
IEC 63086-1:2020/AMD1:2023
IEC 63086-1:2020/AMD1:2023 Amendment 1 - Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General requirements
21/7/2023 - PDF - Inglés, Francés - IEC
Más información12,00 € -
ISO 11114-1:2020/Amd 1:2023
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials
Amendment 1
13/7/2023 - - - ISO
Más información21,00 € -
ISO 11119-3:2020/Amd 1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
Amendment 1
11/7/2023 - PDF - Inglés - ISO
Más información21,00 € -
UNE-EN ISO 10298:2021/A1:2023
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
7/6/2023 - - - AENOR
Más informaciónDe: 35,00 € -
ISO 11119-2:2020/Amd 1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
Amendment 1
11/5/2023 - PDF - Inglés - ISO
Más información21,00 € -
NF EN IEC 60335-2-40/A11, C73-840/A11 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : exigences particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
1/5/2023 - PDF - Francés - AFNOR
Más información95,67 € -
NF EN IEC 60335-2-34/A11, C73-834/A11 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-34 : exigences particulières pour les motocompresseurs
1/5/2023 - PDF - Francés - AFNOR
Más información59,33 € -
ISO 161-1:2018/Amd 1:2023
Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series
Amendment 1
25/4/2023 - PDF - Inglés - ISO
Más información21,00 € -
UNE-EN 60335-2-65:2005/A2:2023
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
15/3/2023 - - - AENOR
Más informaciónDe: 58,00 € -
UNE-EN 60335-2-65:2005/A12:2023
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
15/3/2023 - - - AENOR
Más informaciónDe: 35,00 € -
ISO 4427-2:2019/Amd 1:2023
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
Amendment 1
20/2/2023 - PDF - Inglés - ISO
Más información21,00 € -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
18/1/2023 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
18/1/2023 - - - AENOR
Más informaciónDe: 47,00 € -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
19/10/2022 - - - AENOR
Más informaciónDe: 75,00 € -
UNE-CEN/TS 17152-3:2022
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
12/10/2022 - PDF - Inglés - AENOR
Más información64,00 € -
UNE-CEN/TR 15120:2022
Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading (Endorsed by Asociación Española de Normalización in November of 2022.)
12/10/2022 - PDF - Inglés - AENOR
Más información89,00 € -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
12/10/2022 - PDF - Inglés - AENOR
Más información65,00 € -
UNE-CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
12/10/2022 - PDF - Inglés - AENOR
Más información72,00 € -
UNE-CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
12/10/2022 - PDF - Inglés - AENOR
Más información68,00 € -
UNE-CEN ISO/TS 23818-1:2020
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) (Endorsed by Asociación Española de Normalización in October of 2022.)
12/10/2022 - PDF - Inglés - AENOR
Más información95,00 € -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
28/9/2022 - - - AENOR
Más informaciónDe: 60,00 € -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
28/9/2022 - - - AENOR
Más informaciónDe: 60,00 € -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
28/9/2022 - - - AENOR
Más informaciónDe: 60,00 € -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
28/9/2022 - - - AENOR
Más informaciónDe: 59,00 € -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
28/9/2022 - - - AENOR
Más informaciónDe: 59,00 € -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
28/9/2022 - - - AENOR
Más informaciónDe: 69,00 € -
UNE-EN IEC 60335-2-41:2022/A11:2022
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
21/9/2022 - - - AENOR
Más informaciónDe: 69,00 € -
UNE-EN IEC 60335-2-41:2022/A11:2022
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
21/9/2022 - - - AENOR
Más informaciónDe: 69,00 € -
NF EN ISO 10298/A1, E29-646/A1 (09/2022)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - Amendement 1
1/9/2022 - PDF - Francés - AFNOR
Más información52,00 € -
ISO 21014:2019/Amd 1:2022
Cryogenic vessels — Cryogenic insulation performance
Amendment 1
29/8/2022 - PDF - Inglés - ISO
Más información21,00 € -
NF EN 60335-2-65/A12, C73-865/A12 (08/2022)
Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances
1/8/2022 - PDF - Francés - AFNOR
Más información37,33 € -
NF EN 60335-2-65/A2, C73-865/A2 (08/2022)
Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances
1/8/2022 - PDF - Francés - AFNOR
Más información52,00 € -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
2/7/2022 - PDF - Francés - NBN
Más información20,00 € -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
2/7/2022 - PDF - Francés - NBN
Más información20,00 € -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
2/7/2022 - PDF - Alemán - NBN
Más información20,00 € -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
2/7/2022 - PDF - Inglés - NBN
Más información20,00 € -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
2/7/2022 - PDF - Alemán - NBN
Más información20,00 € -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
2/7/2022 - PDF - Inglés - NBN
Más información20,00 € -
ISO 15874-2:2013/Amd 2:2022
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
Amendment 2: Impact test
13/6/2022 - - - ISO
Más información21,00 € -
ISO 15874-1:2013/Amd 1:2022
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
Amendment 1: Impact test
13/6/2022 - - - ISO
Más información21,00 € -
NBN ISO 9624:2019/A1:2022
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions — Amendment 1
13/6/2022 - PDF - Inglés - NBN
Más información20,00 € -
UNE-EN ISO 11439:2013/A1:2022
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
1/6/2022 - - - AENOR
Más informaciónDe: 62,00 € -
NF EN ISO 15874-1/A1, T54-938-1/A1 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : General - Amendment 1 : Impact test (ISO 15874-1:2013/DAM 1:2021)
1/6/2022 - PDF - Francés - AFNOR
Más información52,00 € -
NF EN ISO 15874-2/A2, T54-938-2/A2 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : Pipes - Amendement 2 : Impact test (ISO 15874-2:2013/DAM 2:2021)
1/6/2022 - PDF - Francés - AFNOR
Más información65,33 € -
ISO 20421-1:2019/Amd 1:2022
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing
Amendment 1
12/4/2022 - PDF - Inglés - ISO
Más información21,00 € -
UNE-CEN/TS 1555-7:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2022.)
1/4/2022 - PDF - Inglés - AENOR
Más información78,00 € -
NF ISO 10298/A1, E29-646/A1 (03/2022)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - AMENDEMENT 1
1/3/2022 - PDF - Francés - AFNOR
Más información28,00 € -
UNE-CEN/TS 13598-3:2021
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in February of 2022.)
1/2/2022 - PDF - Inglés - AENOR
Más información78,00 € -
UNE-EN ISO 18119:2020/A1:2021
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
29/12/2021 - - - AENOR
Más informaciónDe: 47,00 € -
NF EN IEC 60335-2-41/A11, C73-841/A11 (12/2021)
Household and similar electrical appliances - Safety - Particular requirements for pumps
1/12/2021 - PDF - Francés - AFNOR
Más información82,00 € -
VdTÜV WB 399/3 Supplement:2021-11
Unlegierter Stahl C 21, Werkstoff-Nr. 1.0432 Hersteller: Stabstahl, Schmiedestück, Flansch, Ring
30/11/2021 - PDF - Alemán - VDTUV
Más información25,00 € -
NBN EN ISO 11439:2013/A1:2021
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
27/11/2021 - - - NBN
Más información20,00 € -
UNE-EN ISO 16138:2007/A1:2021
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 54,00 € -
UNE-EN ISO 21787:2007/A1:2021
Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 59,00 € -
UNE-EN ISO 16138:2007/A1:2021
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 54,00 € -
UNE-EN ISO 16135:2007/A1:2021
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 58,00 € -
UNE-EN ISO 16139:2007/A1:2021
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 59,00 € -
UNE-EN ISO 16139:2007/A1:2021
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 59,00 € -
UNE-EN ISO 16137:2007/A1:2021
Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 58,00 € -
UNE-EN ISO 16136:2007/A1:2021
Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
3/11/2021 - - - AENOR
Más informaciónDe: 58,00 € -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
3/11/2021 - - - AENOR
Más informaciónDe: 53,00 € -
NF EN ISO 11439/A1, E29-733/A1 (11/2021)
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1
1/11/2021 - PDF - Francés - AFNOR
Más información65,33 € -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
29/10/2021 - - - NBN
Más información20,00 € -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
29/10/2021 - - - NBN
Más información20,00 € -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
29/10/2021 - - - NBN
Más información20,00 € -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
29/10/2021 - - - NBN
Más información20,00 € -
ISO 11439:2013/Amd 1:2021
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
Amendment 1
26/10/2021 - - - ISO
Más información21,00 € -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
16/10/2021 - - - NBN
Más información20,00 € -
ISO 15874-3:2013/Amd 2:2021
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
Amendment 2
13/10/2021 - - - ISO
Más información21,00 € -
ISO 15876-3:2017/Amd 2:2021
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
Amendment 2
13/10/2021 - - - ISO
Más información21,00 € -
ISO 21003-3:2008/Amd 1:2021
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
Amendment 1
13/10/2021 - - - ISO
Más información21,00 € -
ISO 22391-3:2009/Amd 2:2021
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
Amendment 2
13/10/2021 - - - ISO
Más información21,00 € -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
1/10/2021 - PDF - Francés - AFNOR
Más información82,00 € -
NF EN ISO 15874-3/A2, T54-938-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020)
1/10/2021 - PDF - Francés - AFNOR
Más información65,33 € -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
1/10/2021 - PDF - Francés - AFNOR
Más información65,33 € -
NF EN ISO 15876-3/A2, T54-944-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020)
1/10/2021 - PDF - Francés - AFNOR
Más información59,00 € -
NF EN ISO 21003-3/A1, T54-952-3/A1 (10/2021)
Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : Fittings - Amendment 1 (ISO 21003-3:2008/DAM 1:2020)
1/10/2021 - PDF - Francés - AFNOR
Más información65,33 € -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 40,00 € -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 40,00 € -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 40,00 € -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 50,00 € -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
29/9/2021 - - - AENOR
Más informaciónDe: 47,00 € -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 47,00 € -
UNE-EN ISO 7866:2013/A1:2021
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 40,00 € -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 50,00 € -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 40,00 € -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
29/9/2021 - - - AENOR
Más informaciónDe: 40,00 € -
ISO 9624:2019/Amd 1:2021
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions
Amendment 1
29/9/2021 - PDF - Inglés - ISO
Más información21,00 € -
ISO 15877-3:2009/Amd 2:2021
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
Amendment 2
28/9/2021 - - - ISO
Más información21,00 € -
UNE-EN ISO 23208:2020/A1:2021
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
15/9/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-CEN/TS 1046:2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
1/9/2021 - PDF - Inglés - AENOR
Más información72,00 € -
UNE 62422:2014/2M:2021
Construction of double skin tanks by transforming « in situ » steel tanks
14/7/2021 - PDF - Español - AENOR
Más información26,00 € -
NF M88-561/A1 (07/2021)
Secondary containments of thermoplastics static tanks for above ground storage of domestic heating oils, liquid fuels for movable heating appliance and diesel fuels - Blow moulded or rotationally moulded polyethylene (PE) or metallic secondary containments - Requirements and test methods - AMENDMENT 1 - Enveloppes secondaires de réservoirs statiques en thermoplastiques destinés au stockage non enterré de fioul domestique, combustible liquide pour appareil mobile de chauffage et gazole - Enveloppes secondaires en polyéthylène (PE) moulées par soufflage ou moulées par rotation ou métalliques -
1/7/2021 - PDF - Francés - AFNOR
Más información37,33 € -
NBN ISO 13253:2017/A1:2021
Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance — Amendment 1
17/6/2021 - PDF - Inglés - NBN
Más información20,00 € -
NBN ISO 15042:2017/A1:2021
Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance — Amendment 1
17/6/2021 - PDF - Inglés - NBN
Más información20,00 € -
NBN ISO 5151:2017/A1:2021
Non-ducted air conditioners and heat pumps — Testing and rating for performance — Amendment 1
17/6/2021 - PDF - Inglés - NBN
Más información20,00 € -
NBN ISO 18326:2018/A1:2021
Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct — Testing and rating for performance — Amendment 1
8/6/2021 - PDF - Inglés - NBN
Más información20,00 € -
NBN EN ISO 18119:2018/A1:2021
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
28/5/2021 - - - NBN
Más información20,00 € -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
28/5/2021 - - - NBN
Más información20,00 € -
UNE-EN ISO 13088:2013/A1:2021
Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection - Amendment 1 (ISO 13088:2011/Amd 1: 2020)
26/5/2021 - - - AENOR
Más informaciónDe: 35,00 € -
ISO 18326:2018/Amd 1:2021
Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct — Testing and rating for performance
Amendment 1
21/5/2021 - PDF - Inglés - ISO
Más información21,00 € -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
19/5/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
19/5/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
19/5/2021 - - - AENOR
Más informaciónDe: 35,00 € -
ISO 18119:2018/Amd 1:2021
Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing
Amendment 1
11/5/2021 - - - ISO
Más información21,00 € -
UNE-CEN/TS 12007-6:2021
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) (Endorsed by Asociación Española de Normalización in May of 2021.)
1/5/2021 - PDF - Inglés - AENOR
Más información70,00 € -
NF EN ISO 11296-4/A1, P16-364-4/A1 (05/2021)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes - Amendment 1 : updated definitions, marking requirements and procedure for alternative expression of flexural test results - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 4 : Tubage continu par tubes polymérisés sur place - AMENDEMENT 1 : Actualisation des définitions, des exigences de marquage, et de la procédure
1/5/2021 - PDF - Francés - AFNOR
Más información52,00 € -
UNE-CEN/TS 17606:2021
Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards (Endorsed by Asociación Española de Normalización in May of 2021.)
1/5/2021 - PDF - Inglés - AENOR
Más información58,00 € -
UNE-CEN/TS 17607:2021
Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards (Endorsed by Asociación Española de Normalización in May of 2021.)
1/5/2021 - PDF - Inglés - AENOR
Más información57,00 € -
NF EN ISO 18119/A1, E29-755/A1 (05/2021)
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1
1/5/2021 - PDF - Francés - AFNOR
Más información28,00 € -
UNE-EN ISO 16148:2016/A1:2021
Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 (ISO 16148:2016/Amd 1:2020)
28/4/2021 - - - AENOR
Más informaciónDe: 40,00 € -
UNE-CEN/TR 1591-2:2021 IN
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
14/4/2021 - - - AENOR
Más informaciónDe: 90,00 € -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
31/3/2021 - - - AENOR
Más informaciónDe: 35,00 € -
UNE 60402-1:2019/1M:2021
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 1: Regulators with an outlet MOP up to 0,10 bar with or without a low pressure cut-off safety valve with an equivalent flow rate up to 4,8 m3 (n)/h of air
3/3/2021 - PDF - Español - AENOR
Más información28,00 € -
UNE 60402-2:2019/1M:2021
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 2: Regulators for the second family gases, with an inlet MOP between 150 and 400 mbar and an outlet MOP up to 0,15 bar, with a low pressure cut-off safety valve, a high pressure cut-off safety valve and a relief valve for excess outlet pressure and with an equivalent flow rate up to 4,8 m3 (n)/h of air.
3/3/2021 - PDF - Español - AENOR
Más información35,00 € -
UNE 60404-1:2015/1M:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 1: Packages to built in, attach or place in enclosures with an equivalent nominal volume of flow up to 100 m3 (n)/h of natural gas.
3/3/2021 - PDF - Español - AENOR
Más información40,00 € -
UNE 60404-2:2010/1M:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 2: Regulation packages to place in small chest built in a public way with a nominal volume of flow equivalent up to 50 m3(n)/h of natural gas.
3/3/2021 - PDF - Español - AENOR
Más información26,00 € -
UNE-CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
1/3/2021 - PDF - Inglés - AENOR
Más información69,00 € -
UNE 60411:2019/1M:2021
Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
24/2/2021 - PDF - Español - AENOR
Más información28,00 € -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
17/2/2021 - - - AENOR
Más informaciónDe: 35,00 € -
ISO 11296-4:2018/Amd 1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
8/2/2021 - - - ISO
Más información21,00 € -
NBN EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
27/1/2021 - - - NBN
Más información20,00 € -
NBN EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
27/1/2021 - - - NBN
Más información20,00 € -
NBN EN ISO 22391-5:2009/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
27/1/2021 - - - NBN
Más información20,00 €
