Page 4 | 23 : Sistemas y componentes de fluidos de uso general Código ICS, Publicado por: DIN

DIN 477:2021-04

Gas cylinder valves for cylinder test pressures up to 300 bar - Valve inlet and outlet connections
1/4/2021 - PDF - Alemán - DIN
Más información

145,14 €

Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections, German version EN 13555:2021
1/4/2021 - PDF - Alemán - DIN
Más información

116,64 €

DIN 86038-2:2021-04

Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 2: Loose flanges DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
1/4/2021 - PDF - Alemán - DIN
Más información

41,78 €

DIN 86341:2021-04

Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10
1/4/2021 - PDF - Alemán - DIN
Más información

41,78 €

DIN 86128-3:2021-04

Pipe couplings – Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
1/4/2021 - PDF - Alemán - DIN
Más información

56,17 €

DIN EN 12115:2021-04

Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification, German version EN 12115:2021
1/4/2021 - PDF - Alemán - DIN
Más información

140,00 €

DIN EN ISO 3861:2021-04

Rubber hoses and hose assemblies for sand and grit blasting - Specification (ISO 3861:2021), German version EN ISO 3861:2021
1/4/2021 - PDF - Alemán - DIN
Más información

77,20 €

DIN 86039:2021-04

Ships and marine technology - Flat gaskets for flange connections extra light duty - DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
1/4/2021 - PDF - Alemán - DIN
Más información

34,30 €

DIN EN ISO 15877-5:2021-03

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009 + Amd 1:2010 + Amd 2:2020), German and English version EN ISO 15877-5:2009 + A1:2010 + A2:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

91,03 €

DIN EN 13175:2021-03

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings, German version EN 13175:2019+A1:2020
1/3/2021 - PDF - Alemán - DIN
Más información

134,02 €

DIN EN ISO 15875-5:2021-03

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003 + Amd 1:2020), German and English version EN ISO 15875-5:2003 + A1:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

84,58 €

DIN EN ISO 15877-2:2021-03

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009 + Amd 1:2010 + Amd 2:2020), German and English version EN ISO 15877-2:2009 + A1:2010 + A2:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

105,42 €

DIN EN ISO 3949:2021-03

Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12), German version EN ISO 3949:2020
1/3/2021 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN 13953:2021-03

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG), German version EN 13953:2020
1/3/2021 - PDF - Alemán - DIN
Más información

84,58 €

DIN CEN/TS 16769:2021-03

LPG equipment and accessories - Terminology, Trilingual version CEN/TS 16769:2019
1/3/2021 - PDF - Inglés, Francés, Alemán - DIN
Más información

183,55 €

DIN EN ISO 7291:2021-03

Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010 + Amd 1:2015), German version EN ISO 7291:2010 + A1:2015
1/3/2021 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 20475:2021-03

Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018), German version EN ISO 20475:2020
1/3/2021 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 15875-2:2021-03

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007 + Amd 2:2020), German and English version EN ISO 15875-2:2003 + A1:2007 + A2:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

98,32 €

DIN EN ISO 22391-2:2021-03

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009 + Amd. 1:2020), German and English version EN ISO 22391-2:2009 + A1:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

98,32 €

DIN EN ISO 15876-2:2021-03

Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017 + Amd 1:2020), German and English version EN ISO 15876-2:2017 + A1:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

98,32 €

DIN EN ISO 15876-5:2021-03

Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017 + Amd. 1:2020), German and English version EN ISO 15876-5:2017 + A1:2020.
1/3/2021 - PDF - Inglés, Alemán - DIN
Más información

84,58 €

DIN EN 14772:2021-03

Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560, German version EN 14772:2021
1/3/2021 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN 1514-2:2021-03

Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges, German version EN 1514-2:2014+A1:2021
1/3/2021 - PDF - Alemán - DIN
Más información

77,20 €

DIN 7795:2021-03

Measuring compression set of elastomers in hot water
1/3/2021 - PDF - Alemán - DIN
Más información

63,27 €

DIN EN 12493:2021-02

LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture, German version EN 12493:2020
1/2/2021 - PDF - Alemán - DIN
Más información

145,14 €

DIN CEN ISO/TS 23818-1:2021-02

Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020), German version CEN ISO/TS 23818-1:2020
1/2/2021 - PDF - Alemán - DIN
Más información

120,56 €

DIN 86056:2021-02

Conduit pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
1/2/2021 - PDF - Alemán - DIN
Más información

56,17 €

DIN 4069:2021-02

Gas distribution grids - Indication labels.
1/2/2021 - PDF - Alemán - DIN
Más información

41,78 €

DIN 3606:2021-01

Pipe hoisting caps for casing pipes according to DIN 4918.
1/1/2021 - PDF - Alemán - DIN
Más información

34,30 €

DIN EN 15655-2:2021-01

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes, German version EN 15655-2:2020
1/1/2021 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 6259-2:2021-01

Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI) (ISO 6259-2:2020), German version EN ISO 6259-2:2020
1/1/2021 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN 13476-2:2020-12

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A, German version EN 13476-2:2018+A1:2020
1/12/2020 - PDF - Alemán - DIN
Más información

140,00 €

DIN EN 13476-3:2020-12

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B, German version EN 13476-3:2018+A1:2020
1/12/2020 - PDF - Alemán - DIN
Más información

140,00 €

DIN EN 12569:2020-12

Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests, German version EN 12569:2020
1/12/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN 13598-1:2020-12

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers, German version EN 13598-1:2020
1/12/2020 - PDF - Alemán - DIN
Más información

111,40 €

DIN EN 13598-2:2020-12

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers, German version EN 13598-2:2020
1/12/2020 - PDF - Alemán - DIN
Más información

105,42 €

DIN EN 12542:2020-12

LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> - Design and manufacture, German version EN 12542:2020
1/12/2020 - PDF - Alemán - DIN
Más información

162,06 €

DIN EN ISO 13088:2020-12

Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011 + Amd.1:2020), German version EN ISO 13088:2012 + A1:2020
1/12/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 11755:2020-12

Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 11755:2005), German version EN ISO 11755:2020
1/12/2020 - PDF - Alemán - DIN
Más información

56,17 €

DIN EN IEC 60704-2-7:2020-12

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans (IEC 60704-2-7:2020), German version EN IEC 60704-2-7:2020.
1/12/2020 - PDF - Alemán - DIN
Más información

98,32 €

DIN 30655-1:2020-12

Installation systems for gas installation inside buildings, consisting of multi-layer composite pipes and their corresponding fittings, for an operating pressure 100 mbar - Part 1: Requirements and testing, Text in German and English.
1/12/2020 - PDF - Inglés, Alemán - DIN
Más información

162,06 €

DIN 30655-2:2020-12

Installation systems for gas installation inside buildings, consisting of multi-layer composite pipes and their corresponding fittings, for an operating pressure 100 mbar - Part 2: Conformity assessment, Text in German and English.
1/12/2020 - PDF - Inglés, Alemán - DIN
Más información

98,32 €

DIN 30655-3:2020-12

Installation systems for gas installation inside buildings, consisting of multi-layer composite pipes and their corresponding fittings, for an operating pressure 100 mbar - Part 3: Conformity assessment for the use of alternative pipe materials, Text in German and English.
1/12/2020 - PDF - Inglés, Alemán - DIN
Más información

145,14 €

DIN 14334:2020-12

Solid couplings Storz System PN 16 for delivery and suction
1/12/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN 16436-1:2020-12

Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings, German version EN 16436-1:2014+A3:2020.
1/12/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN CEN/TR 13121-5:2020-11

GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel, German version CEN/TR 13121-5:2017
1/11/2020 - PDF - Alemán - DIN
Más información

120,56 €

DIN 35860:2020-11

Sampling valves in drinking water installations - Requirements and tests
1/11/2020 - PDF - Alemán - DIN
Más información

48,79 €

DIN EN 14276-1:2020-11

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements, German version EN 14276-1:2020
1/11/2020 - PDF - Alemán - DIN
Más información

195,79 €

DIN EN 14276-2:2020-11

Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements, German version EN 14276-2:2020
1/11/2020 - PDF - Alemán - DIN
Más información

105,42 €

DIN 3267:2020-11

Sanitary tapware - Flushing tubes for flush-valves
1/11/2020 - PDF - Alemán - DIN
Más información

34,30 €

DIN EN 16728:2020-11

LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection, German version EN 16728:2016+A2:2020
1/11/2020 - PDF - Alemán - DIN
Más información

134,02 €

DIN EN ISO 23208:2020-11

Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017 + Amd 1:2020), German version EN ISO 23208:2019 + A1:2020
1/11/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN CEN/TS 17176-7:2020-11

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity, German version CEN/TS 17176-7:2020.
1/11/2020 - PDF - Alemán - DIN
Más información

78,50 €

DIN 16463:2020-11

Determination of influence of chemical fluids on the long-term hydrostatic strength of pressure pipes made of thermoplastics materials
1/11/2020 - PDF - Alemán - DIN
Más información

48,79 €

DIN 4724:2020-11

Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
1/11/2020 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 8031:2020-11

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020), German version EN ISO 8031:2020
1/11/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN 15096:2020-10

Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification, German version EN 15096:2020
1/10/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN/TS 17026:2020-10

Unfired pressure vessels - Additional Requirements for pressure equipment and pressure components fabricated with additive manufacturing methods
1/10/2020 - PDF - Alemán - DIN
Más información

125,61 €

DIN EN ISO 10893-2:2020-10

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd 1:2020), German version EN ISO 10893-2:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 10893-8:2020-10

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd 1:2020), German version EN ISO 10893-8:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN ISO 10893-1:2020-10

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011 + Amd 1:2020), German version EN ISO 10893-1:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 10893-12:2020-10

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011 + Amd 1:2020), German version EN ISO 10893-12:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

63,27 €

DIN EN ISO 10893-10:2020-10

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd 1:2020), German version EN ISO 10893-10:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 10893-11:2020-10

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020), German version EN ISO 10893-11:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN ISO 10893-9:2020-10

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd 1:2020), German version EN ISO 10893-9:2011 + A1:2020
1/10/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN ISO 10893-3:2020-10

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011 + Amd 1:2019 + Amd 2:2020), German version EN ISO 10893-3:2011 + A1:2019 + A2:2020
1/10/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN 14451:2020-10

Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 10 to DN 50 inclusive - Family D, type A, German version EN 14451:2020
1/10/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 13259:2020-10

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020), German version EN ISO 13259:2020
1/10/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN/TS 26061:2020-09

Metallic tanks for the underground storage of liquids - Transport and installation
1/9/2020 - PDF - Alemán - DIN
Más información

33,36 €

DIN EN ISO 21809-1:2020-09

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018), German version EN ISO 21809-1:2018
1/9/2020 - PDF - Alemán - DIN
Más información

167,66 €

DIN EN ISO 21809-3:2020-09

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016 + Amd 1:2020), English version EN ISO 21809-3:2016 + A1:2020
1/9/2020 - PDF - Inglés, Alemán - DIN
Más información

248,22 €

DIN EN 14628-1:2020-09

Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings, German version EN 14628-1:2020
1/9/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 16148:2020-09

Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016 + Amd 1:2020), German version EN ISO 16148:2016 + A1:2020
1/9/2020 - PDF - Alemán - DIN
Más información

116,64 €

DIN EN ISO 20088-2:2020-09

Determination of the resistance to cryogenic spill of insulation materials - Part 2: Vapour exposure (ISO 20088-2:2020), German version EN ISO 20088-2:2020.
1/9/2020 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 7369:2020-09

Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020), German version EN ISO 7369:2020
1/9/2020 - PDF - Alemán - DIN
Más información

69,91 €

DIN EN 17414-1:2020-09

District cooling pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods, German version EN 17414-1:2020
1/9/2020 - PDF - Alemán - DIN
Más información

105,42 €

DIN EN 17414-2:2020-09

District cooling pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipe - Requirements and test methods, German version EN 17414-2:2020
1/9/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN 17414-3:2020-09

District cooling pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes - Requirements and test methods, German version EN 17414-3:2020
1/9/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN 14461-3:2020-08

Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
1/8/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN ISO 20361:2020-08

Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019), German version EN ISO 20361:2019 + A11:2020
1/8/2020 - PDF - Alemán - DIN
Más información

111,40 €

DIN EN 856:2020-08

Ruber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification, German version EN 856:2015+AC:2019
1/8/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 16964:2020-08

Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019), German version EN ISO 16964:2020
1/8/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN 16767:2020-08

Industrial valves - Metallic check valves, German version EN 16767:2020
1/8/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN CEN/TS 1451-2:2020-08

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1451-2:2019
1/8/2020 - PDF - Alemán - DIN
Más información

72,80 €

DIN CEN/TS 1852-2:2020-08

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1852-2:2019
1/8/2020 - PDF - Alemán - DIN
Más información

67,48 €

DIN CEN/TS 13476-4:2020-08

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity, German version CEN/TS 13476-4:2019
1/8/2020 - PDF - Alemán - DIN
Más información

84,49 €

DIN EN 14624:2020-08

Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants, German version EN 14624:2020
1/8/2020 - PDF - Alemán - DIN
Más información

111,40 €

DIN EN ISO 8659:2020-07

Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020), German version EN ISO 8659:2020
1/7/2020 - PDF - Alemán - DIN
Más información

63,27 €

DIN EN 1440:2020-07

LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection, German version EN 1440:2016+A2:2020
1/7/2020 - PDF - Alemán - DIN
Más información

98,32 €

DIN 11865:2020-07

Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Tees, elbows and reducers
1/7/2020 - PDF - Alemán - DIN
Más información

111,40 €

DIN EN 13766:2020-07

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification, German version EN 13766:2018+A1:2020
1/7/2020 - PDF - Alemán - DIN
Más información

98,32 €

DIN 3535-5:2020-07

Seals for gas supply — Part 5: Sealing materials of rubber, cork and synthetic fibres for gas fittings and gas appliances.
1/7/2020 - PDF - Alemán - DIN
Más información

56,17 €

DIN EN ISO 22109:2020-06

Industrial valves - Gearbox for valves (ISO 22109:2020), German version EN ISO 22109:2020
1/6/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN 12735-1:2020-06

Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems, German version EN 12735-1:2020
1/6/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 12759-4:2020-05

Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019), German version EN ISO 12759-4:2019
1/5/2020 - PDF - Alemán - DIN
Más información

105,42 €

DIN 4034-1:2020-04

Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 1: Requirements, test methods and marking for drains and sewers in addition to DIN EN 1917:2003-04.
1/4/2020 - PDF - Alemán - DIN
Más información

116,64 €

DIN 86259:2020-04

Ships and marine technology - Flanged gate valves extra light duty - DN 32 to DN 125, PN 10
1/4/2020 - PDF - Alemán - DIN
Más información

48,79 €

DIN EN 15202:2020-04

LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections, German version EN 15202:2019
1/4/2020 - PDF - Alemán - DIN
Más información

150,65 €

DIN 2413:2020-04

Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
1/4/2020 - PDF - Alemán - DIN
Más información

105,42 €

DIN 86201:2020-04

Connecting fittings for international fire-extinguishing shore connection - Nominal pressure 16
1/4/2020 - PDF - Alemán - DIN
Más información

41,78 €

DIN 86552:2020-03

Valves, screwed bonnet type of steel with 24°-connection with port end W according to DIN 3861
1/3/2020 - PDF - Alemán - DIN
Más información

63,27 €

DIN EN 14419:2020-03

District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems, German version EN 14419:2019
1/3/2020 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 10961:2020-03

Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019), German version EN ISO 10961:2019
1/3/2020 - PDF - Alemán - DIN
Más información

111,40 €

DIN 85389:2020-03

Ships and marine technology - Flanges on castings extra light duty - DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10 - Principles of design
1/3/2020 - PDF - Alemán - DIN
Más información

34,30 €

DIN 86200:2020-03

Fire extinguishing and wash deck installations - Hose couplings, armatures, hoses, accessories - Summary of types for shipbuilding
1/3/2020 - PDF - Alemán - DIN
Más información

41,78 €

DIN 87901:2020-02

Sniffle valves for pumps
1/2/2020 - PDF - Alemán - DIN
Más información

34,30 €

DIN 86260:2020-02

Shutt off valves for shipboard use - Made of red brass, with flanges, DN 15 to DN 500
1/2/2020 - PDF - Alemán - DIN
Más información

69,91 €

DIN EN ISO 9809-1:2020-02

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1100 MPa (ISO 9809-1:2019), German version EN ISO 9809-1:2019
1/2/2020 - PDF - Alemán - DIN
Más información

157,10 €

DIN EN ISO 9809-2:2020-02

Gas cylinders and tubes - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1100 MPa (ISO 9809-2:2019), German version EN ISO 9809-2:2019
1/2/2020 - PDF - Alemán - DIN
Más información

162,06 €

DIN EN ISO 9809-3:2020-02

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO 9809-3:2019), German version EN ISO 9809-3:2019
1/2/2020 - PDF - Alemán - DIN
Más información

150,65 €

DIN EN 14901-2:2020-02

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO), German version EN 14901-2:2019
1/2/2020 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN ISO 3183:2020-02

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019), German version EN ISO 3183:2019
1/2/2020 - PDF - Alemán - DIN
Más información

105,42 €

DIN 86261:2020-02

Non return valves for shipboard use - Cutt off type, made of red brass, with flanges, DN 15 to 500
1/2/2020 - PDF - Alemán - DIN
Más información

69,91 €

DIN EN 1971-2:2020-02

Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface, German version EN 1971-2:2019
1/2/2020 - PDF - Alemán - DIN
Más información

56,17 €

DIN EN 1971-1:2020-02

Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface, German version EN 1971-1:2019
1/2/2020 - PDF - Alemán - DIN
Más información

56,17 €

DIN EN 12954:2020-02

General principles of cathodic protection of buried or immersed onshore metallic structures, German version EN 12954:2019
1/2/2020 - PDF - Alemán - DIN
Más información

122,34 €

DIN EN 14901-1:2020-01

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty), German version EN 14901-1:2014+A1:2019
1/1/2020 - PDF - Alemán - DIN
Más información

84,58 €

DIN ISO 16611:2020-01

Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests (ISO 16611:2017)
1/1/2020 - PDF - Alemán - DIN
Más información

98,32 €

DIN 30654:2020-01

Sealing profiles of expanded PTFE for flanged joints in the gas supply.
1/1/2020 - PDF - Alemán - DIN
Más información

48,79 €

DIN EN 16125:2019-12

LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase, German version EN 16125:2019
1/12/2019 - PDF - Alemán - DIN
Más información

122,34 €

DIN EN ISO 16138:2019-12

Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006 + Amd 1:2019), German version EN ISO 16138:2006 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 21787:2019-12

Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006 + Amd 1:2019), German version EN ISO 21787:2006 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 16135:2019-12

Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006 + Amd 1:2019), German version EN ISO 16135:2006 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 16136:2019-12

Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006 + Amd 1:2019), German version EN ISO 16136:2006 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 16139:2019-12

Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006 + Amd 1:2019), German version EN ISO 16139:2006 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN 17248:2019-12

District heating and district cooling pipe systems - Terms and definitions, German version EN 17248:2019
1/12/2019 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN 286-4:2019-12

Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock, German and English version prEN 286-4:2019
1/12/2019 - PDF - Inglés, Alemán - DIN
Más información

134,02 €

DIN EN ISO 10462:2019-12

Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013 + Amd 1:2019), German version EN ISO 10462:2013 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 16137:2019-12

Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006 + Amd 1:2019), German version EN ISO 16137:2006 + A1:2019
1/12/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 1403:2019-12

Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019), German version EN ISO 1403:2019
1/12/2019 - PDF - Alemán - DIN
Más información

63,27 €

DIN EN 17150:2019-11

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes, German version EN 17150:2019
1/11/2019 - PDF - Alemán - DIN
Más información

63,27 €

DIN EN 17151:2019-11

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes, German version EN 17151:2019
1/11/2019 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN 13445-3/A16:2019-11

Unfired pressure vessels - Part 3: Design, German and English version EN 13445-3:2014/prA16:2019
1/11/2019 - PDF - Inglés, Alemán - DIN
Más información

116,64 €

DIN EN 13445-3/A19:2019-11

Unfired pressure vessels - Part 3: Design, German and English version EN 13445-3:2014/prA19:2019
1/11/2019 - PDF - Inglés, Alemán - DIN
Más información

41,78 €

DIN EN 286-3:2019-11

Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock, German and English version prEN 286-3:2019
1/11/2019 - PDF - Inglés, Alemán - DIN
Más información

145,14 €

DIN EN 286-1:2019-11

Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes, German and English version prEN 286-1:2019
1/11/2019 - PDF - Inglés, Alemán - DIN
Más información

179,53 €

DIN EN 286-2:2019-11

Simple unfired pressure vessels designed to contain air or nitrogen - Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers, German and English version prEN 286-2:2019
1/11/2019 - PDF - Inglés, Alemán - DIN
Más información

128,22 €

DIN EN IEC 60534-3-1:2019-11

Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2019), German version EN IEC 60534-3-1:2019.
1/11/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 11296-7:2019-11

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019), German version EN ISO 11296-7:2019
1/11/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN 14423:2019-11

Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar, German version EN 14423:2013+A2:2019
1/11/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN 14564:2019-10

Tanks for transport of dangerous goods - Terminology, German version EN 14564:2019
1/10/2019 - PDF - Alemán - DIN
Más información

116,64 €

DIN EN 764-7:2019-10

Pressure equipment - Part 7: Safety systems for unfired pressure equipment, German and English version prEN 764-7:2019
1/10/2019 - PDF - Inglés, Alemán - DIN
Más información

140,00 €

DIN 16892:2019-10

Crosslinked polyethylene (PE-X) pipes - General quality requirements, testing, Text in German and English
1/10/2019 - PDF - Inglés, Alemán - DIN
Más información

77,20 €

DIN 16728:2019-10

Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X) - Determination of the degree of crosslinking through rheological measurement of the storage modulus, Text in German and English
1/10/2019 - PDF - Inglés, Alemán - DIN
Más información

77,20 €

DIN 16893:2019-10

Crosslinked polyethylene (PE-X) pipes - Dimensions, Text in German and English
1/10/2019 - PDF - Inglés, Alemán - DIN
Más información

77,20 €

DIN 8906 Berichtigung 1:2019-10

PN 40 flared flange solderless compression couplings for use in refrigerating systems, Corrigendum 1
1/10/2019 - PDF - Alemán - DIN
Más información

0,00 €

DIN 3866 Berichtigung 1:2019-10

Refrigeration, threaded stem, 90° flared flanges for solderless compression couplings rated for PN 40, Corrigendum 1
1/10/2019 - PDF - Alemán - DIN
Más información

0,00 €

DIN 28150:2019-10

Divided lapped flange for glass lined welding necks - PN 10
1/10/2019 - PDF - Alemán - DIN
Más información

34,30 €

DIN EN 16436-2:2019-10

Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies, German version EN 16436-2:2018.
1/10/2019 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 14414:2019-09

Pump system energy assessment (ISO/ASME 14414:2019), German version EN ISO 14414:2019
1/9/2019 - PDF - Alemán - DIN
Más información

150,65 €

DIN EN 12807:2019-09

LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction, German version EN 12807:2019
1/9/2019 - PDF - Alemán - DIN
Más información

105,42 €

DIN CEN ISO/TS 21003-7*DIN SPEC 19851:2019-09

Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019), German and English version CEN ISO/TS 21003-7:2019.
1/9/2019 - PDF - Inglés, Alemán - DIN
Más información

107,20 €

DIN EN 1295-1:2019-08

Structural design of buried pipelines under various conditions of loading - Part 1: General requirements, German version EN 1295-1:2019
1/8/2019 - PDF - Alemán - DIN
Más información

105,42 €

DIN 1986-4:2019-08

Drainage systems on private ground - Part 4: Fields of application of sewage pipes and fittings of different materials
1/8/2019 - PDF - Alemán - DIN
Más información

56,17 €

DIN EN 13445-3/A14:2019-08

Unfired pressure vessels - Part 3: Design, German and English version EN 13445-3:2014/prA14:2019
1/8/2019 - PDF - Inglés, Alemán - DIN
Más información

140,00 €

DIN EN 10217-1:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German version EN 10217-1:2019
1/8/2019 - PDF - Alemán - DIN
Más información

128,22 €

DIN EN 10217-2:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-2:2019
1/8/2019 - PDF - Alemán - DIN
Más información

111,40 €

DIN EN 10217-3:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties, German version EN 10217-3:2019
1/8/2019 - PDF - Alemán - DIN
Más información

134,02 €

DIN EN 10217-4:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-4:2019
1/8/2019 - PDF - Alemán - DIN
Más información

105,42 €

DIN EN 10217-5:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-5:2019
1/8/2019 - PDF - Alemán - DIN
Más información

122,34 €

DIN EN 10217-6:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-6:2019
1/8/2019 - PDF - Alemán - DIN
Más información

122,34 €

DIN EN 17176-1:2019-07

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General, German version EN 17176-1:2019.
1/7/2019 - PDF - Alemán - DIN
Más información

77,20 €

DIN EN 17176-5:2019-07

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system, German version EN 17176-5:2019.
1/7/2019 - PDF - Alemán - DIN
Más información

69,91 €

DIN EN 12285-3:2019-06

Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings, German version EN 12285-3:2019
1/6/2019 - PDF - Alemán - DIN
Más información

111,40 €

DIN 30650 Berichtigung 1:2019-06

Odorant storage and transportation containers, safety requirements and tests, Corrigendum 1
1/6/2019 - PDF - Alemán - DIN
Más información

0,00 €

DIN EN 13445-3/A20:2019-06

Unfired pressure vessels - Part 3: Design, German and English version EN 13445-3:2014/prA20:2019
1/6/2019 - PDF - Inglés, Alemán - DIN
Más información

214,30 €

DIN EN 12817:2019-06

LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m<(hoch)3>, German version EN 12817:2019
1/6/2019 - PDF - Alemán - DIN
Más información

111,40 €

DIN EN 12819:2019-06

LPG equipment and accessories - Inspection and requalification of LPG pressure vessels greater than 13 m<(hoch)3>, German version EN 12819:2019
1/6/2019 - PDF - Alemán - DIN
Más información

105,42 €

DIN EN ISO 10893-6:2019-06

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019), German version EN ISO 10893-6:2019
1/6/2019 - PDF - Alemán - DIN
Más información

84,58 €

DIN EN ISO 10893-7:2019-06

Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019), German version EN ISO 10893-7:2019
1/6/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 21225-1:2019-06

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018), German version EN ISO 21225-1:2018.
1/6/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 21225-2:2019-06

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018), German version EN ISO 21225-2:2018.
1/6/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN ISO 15874-5:2019-06

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013 + Amd. 1:2018), German and English version EN ISO 15874-5:2013 + A1:2018.
1/6/2019 - PDF - Inglés, Alemán - DIN
Más información

111,40 €

DIN 73411-2 Berichtigung 1:2019-06

Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing, Corrigendum 1
1/6/2019 - PDF - Alemán - DIN
Más información

0,00 €

DIN 30690-1:2019-05

Construction elements in the gas supply system - Part 1: Requirements for construction elements in gas supply systems.
1/5/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN EN 13445-3/A15:2019-05

Unfired pressure vessels - Part 3: Design, German and English version EN 13445-3:2014/prA15:2019
1/5/2019 - PDF - Inglés, Alemán - DIN
Más información

84,58 €

DIN EN 13445-12:2019-05

Unfired pressure vessels - Part 12: Additional requirements for pressure vessels of copper and copper alloys, German and English version prEN 13445-12:2019
1/5/2019 - PDF - Inglés, Alemán - DIN
Más información

122,34 €

DIN EN ISO 11296-3:2019-05

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018), German version EN ISO 11296-3:2018
1/5/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN EN ISO 11297-3:2019-05

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018), German version EN ISO 11297-3:2018
1/5/2019 - PDF - Alemán - DIN
Más información

98,32 €

DIN 28139-1:2019-05

Welding necks for glass lined vessels - Part 1: Form H main flanges for clamp screw connections - Connecting dimensions
1/5/2019 - PDF - Alemán - DIN
Más información

41,78 €

DIN 28139-2:2019-05

Welding necks for glass lined vessels - Part 2: Form M manhole, handhole and assembly opening for clamp screw connections - Connecting dimensions
1/5/2019 - PDF - Alemán - DIN
Más información

34,30 €

DIN 30672-2:2019-05

Field coating materials for corrosion protection of buried pipelines - Part 2: Application and quality control on site
1/5/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN 30672-1:2019-05

Field coating materials for corrosion protection of buried pipelines - Part 1: Requirements and product testings
1/5/2019 - PDF - Alemán - DIN
Más información

69,91 €

DIN 30675-1:2019-05

External corrosion protection of buried pipes - Part 1: Corrosion protection systems and application for steel pipes
1/5/2019 - PDF - Alemán - DIN
Más información

105,42 €

DIN 30675-2:2019-05

External corrosion protection of buried pipes - Part 2: Corrosion protection systems and application for ductile iron pipes
1/5/2019 - PDF - Alemán - DIN
Más información

77,20 €

DIN CEN ISO/TS 22391-7*DIN SPEC 19576:2019-04

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018), German and English version CEN ISO/TS 22391-7:2018.
1/4/2019 - PDF - Inglés, Alemán - DIN
Más información

84,49 €

DIN CEN ISO/TS 15874-7*DIN SPEC 19717:2019-04

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018), German and English version CEN ISO/TS 15874-7:2018.
1/4/2019 - PDF - Inglés, Alemán - DIN
Más información

84,49 €

DIN CEN/TS 13445-501*DIN SPEC 2925:2019-04

Unfired pressure vessels - Part 501: Acoustic emission for pressure vessels, German version CEN/TS 13445-501:2018
1/4/2019 - PDF - Alemán - DIN
Más información

61,68 €

DIN EN 15655-1:2019-04

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings, German version EN 15655-1:2018
1/4/2019 - PDF - Alemán - DIN
Más información

91,03 €

DIN CEN ISO/TS 15875-7*DIN SPEC 19718:2019-04

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018), German and English version CEN ISO/TS 15875-7:2018.
1/4/2019 - PDF - Inglés, Alemán - DIN
Más información

84,49 €

DIN CEN ISO/TS 15876-7*DIN SPEC 19719:2019-04

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018), German and English version CEN ISO/TS 15876-7:2018.
1/4/2019 - PDF - Inglés, Alemán - DIN
Más información

84,49 €

DIN CEN ISO/TS 15877-7*DIN SPEC 1030:2019-04

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018), German and English version CEN ISO/TS 15877-7:2018.
1/4/2019 - PDF - Inglés, Alemán - DIN
Más información

84,49 €