23 : Sistemas y componentes de fluidos de uso general
-
BS EN 15542:2026
Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods
6/3/2026 - PDF DRM - Inglés - BSI
Más información269,00 € -
PD CEN ISO/TS 23818-3:2026
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Unplasticised poly(vinyl chloride) (PVC-U) material
6/3/2026 - PDF DRM - Inglés - BSI
Más información269,00 € -
26/30500473 DC:2026
BS ISO 24993 Plastics — Rotational moulded polyethylene water storage tanks
4/3/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 17104:2026 + Redline
Tracked Changes. Rotary tools for threaded fasteners. Impulse and impulsing tools. Performance test method
4/3/2026 - PDF DRM - Inglés - BSI
Más información499,00 € -
BS EN ISO 21809-2:2026
Oil and gas industries including lower carbon energy. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy
3/3/2026 - PDF DRM - Inglés - BSI
Más información404,00 € -
BS EN 13807:2026
Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing
3/3/2026 - PDF DRM - Inglés - BSI
Más información316,00 € -
193,00 €
-
316,00 €
-
BS EN ISO 5210:2026
Industrial valves. Multi-turn actuator attachments
2/3/2026 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 17104:2026
Rotary tools for threaded fasteners. Impulse and impulsing tools. Performance test method
26/2/2026 - PDF DRM - Inglés - BSI
Más información355,00 € -
BS EN ISO 11295:2026 + Redline
Tracked Changes. Plastics piping systems used for the rehabilitation of pipelines. Classification and overview of strategic, tactical and operational activities
24/2/2026 - PDF DRM - Inglés - BSI
Más información566,00 € -
26/30502310 DC:2026
BS EN ISO 10156:2017/Amd 1 Gas cylinders — Gases and gas mixtures Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets. AMENDMENT 1
24/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 18107:2026
Variable refrigerant flow air-to-air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors and energy performance mapping approach
20/2/2026 - PDF DRM - Inglés - BSI
Más información404,00 € -
26/30556426 DC:2026
BS EN IEC 60335-2-65/AMD1 Amendment 1 - Household and similar electrical appliances Safety Part 2-65: Particular requirements for air-cleaning
20/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 21809-4:2026 + Redline
Tracked Changes. Oil and gas industries including lower carbon energy. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene (2-layer PE)
19/2/2026 - PDF DRM - Inglés - BSI
Más información566,00 € -
26/30515773 DC:2026
BS ISO 12759-3:2019/Amd 1 Fans — Efficiency classification for fans Part 3: without drives at maximum operating speed Amendment
18/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30504632 DC:2026
BS ISO 19251-2 Thermoplastic pipes for the conveyance of fluid — Hydroaxial tension (HAT) method Part 2: Determination resistance pipe/pipe or pipe/fitting fitting/fitting assemblies to longitudinal stress rupture
17/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30504730 DC:2026
BS ISO 19251-1 Thermoplastic pipes for the conveyance of fluid — Hydroaxial tension (HAT) method Part 1: Determination longitudinal tensile strength pipe or pipe/pipe pipe/fitting assemblies
17/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30507182 DC:2026
BS ISO 8139. Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
16/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30515777 DC:2026
BS EN ISO 12759-4:2019/Amd 1 Fans — Efficiency classification for fans Part 4: Driven at maximum operating speed
16/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30497580 DC:2026
BS ISO 25096. Cryogenic pipeline systems with automatic nitrogen supply and distribution systems. Design, installation, and testing
16/2/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN ISO 11295:2026
Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities
13/2/2026 - PDF DRM - Inglés - BSI
Más información404,00 € -
BS EN ISO 11300-1:2026
Piping systems for rehabilitation of underground drains, sewers and water supply networks Polyethylene (PE) material
13/2/2026 - PDF DRM - Inglés - BSI
Más información374,00 € -
BS EN ISO 11300-3:2026
Piping systems for rehabilitation of underground drains, sewers and water supply networks Unplasticized poly (vinyl chloride) (PVC-U) material
13/2/2026 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 20145:2026 + Redline
Tracked Changes. Pneumatic fluid power. Test methods for measuring acoustic emission pressure levels of exhaust silencers
13/2/2026 - PDF DRM - Inglés - BSI
Más información443,00 € -
26/30556002 DC:2026
BS EN ISO 15494 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) —Metric series for specifications for components and the system
12/2/2026 - PDF DRM - Inglés - BSI
Más información42,00 € -
BS ISO 21809-4:2026
Oil and gas industries including lower carbon energy. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene (2-layer PE)
11/2/2026 - PDF DRM - Inglés - BSI
Más información404,00 € -
BS ISO 20145:2026
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
10/2/2026 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS EN ISO 2507:2026
Thermoplastics pipes and fittings. Vicat softening temperature. General test method and test conditions for vinyl chloride-based (PVC-U, PVC-C, PVC-HI) and acrylonitrile-based (ABS, ASA) pipes and fittings fittings
6/2/2026 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS ISO 16611:2026 + Redline
Tracked Changes. Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
6/2/2026 - PDF DRM - Inglés - BSI
Más información443,00 € -
BS ISO 16611:2026
Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
30/1/2026 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS ISO 1436:2026 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
28/1/2026 - PDF DRM - Inglés - BSI
Más información271,00 € -
BS ISO 5222-3:2026
Heat recovery ventilators and energy ventilators — Testing calculating methods for performance factor Annual sensible heating cooling factors of heat (HRVs)
27/1/2026 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS ISO 1436:2026
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
23/1/2026 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS EN 13385:2025 + Redline
Tracked Changes. Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs) for compressed and liquefied gases (excluding acetylene). Inspection at time of filling
23/1/2026 - PDF DRM - Inglés - BSI
Más información232,00 € -
BS ISO 7685:2026 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness
23/1/2026 - PDF DRM - Inglés - BSI
Más información271,00 € -
26/30495932 DC:2026
BS ISO 8434-2 Metallic tube connections for fluid power and general use Part 2: 37 degree flared connectors
19/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30516379 DC:2026
BS EN 17248 District heating and district cooling pipe systems - Terms and definitions
15/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30494102 DC:2026
BS EN ISO 17871:2020/A2 Gas cylinders — Quick-release cylinder valves — Specification and type testing — Amendment 2
15/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30494474 DC:2026
BS EN ISO 17879 Gas cylinders — Self-closing cylinder valves — Specification and type testing
15/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30502306 DC:2026
BS EN ISO 11117:2019/Amd 1 Gas cylinders — Valve protection caps and guards — Design, construction and tests - Amendment 1
15/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30502757 DC:2026
BS ISO 10146 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
15/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30495935 DC:2026
BS ISO 6162-1 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric inch screws Part 1: connectors, ports mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 (350 bar), DN 13 127
13/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30484810 DC:2026
BS ISO 19884-1 Gaseous Hydrogen - Pressure vessels for stationary storage Part 1: general requirements
13/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 13385:2025
Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs) for compressed and liquefied gases (excluding acetylene). Inspection at time of filling
13/1/2026 - PDF DRM - Inglés - BSI
Más información165,00 € -
26/30502760 DC:2026
BS EN ISO 13760 Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
13/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30492741 DC:2026
BS ISO 9853 Thermoplastics piping systems — Crushing test for moulded fittings
13/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 7685:2026
Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness
12/1/2026 - PDF DRM - Inglés - BSI
Más información193,00 € -
26/30502752 DC:2026
BS ISO 6964 Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
12/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30550945 DC:2026
PD 5500:2024+A3. Specification for unfired pressure vessels
9/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30507185 DC:2026
BS ISO 15524 Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
8/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30494700 DC:2026
BS EN ISO 20769-1 Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- gamma rays Part 1: Tangential radiographic
7/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 4407:2025 + Redline
Tracked Changes. Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope
7/1/2026 - PDF DRM - Inglés - BSI
Más información443,00 € -
BS EN 161:2022+A1:2025
Automatic shut-off valves for gas burners and gas appliances
5/1/2026 - PDF DRM - Inglés - BSI
Más información404,00 € -
BS EN ISO 14245:2021+A1:2025
Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
5/1/2026 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS EN 10284:2025 + Redline
Tracked Changes. Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
5/1/2026 - PDF DRM - Inglés - BSI
Más información378,00 € -
26/30507859 DC:2026
BS EN ISO 1403 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification
2/1/2026 - PDF DRM - Inglés - BSI
Más información23,00 € -
26/30552149 DC:2025
BS ISO 7986 Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of rod seals used in oil hydraulic reciprocating applications
29/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 12285-4:2025
Workshop fabricated steel tanks Part 4: Vertical cylindrical single skin and double for the aboveground storage of flammable nonflammable water polluting liquids other than heating cooling buildings
23/12/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS ISO 21224:2025
Evaluation of centreline segregation of continuously cast slabs
19/12/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS EN 12186:2025 + Redline
Tracked Changes. Gas infrastructure. Gas pressure control stations for transmission and distribution. Functional requirements
19/12/2025 - PDF DRM - Inglés - BSI
Más información524,00 € -
25/30545512 DC:2025
BS EN 13480-4:2024/A1 Metallic industrial piping Part 4: Fabrication and installation
18/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30546934 DC:2025
BS EN 17151-2 Plastics piping systems for non-pressure underground conveyance and storage of surface water Part 2: Test method determination creep behaviour boxes
18/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30546937 DC:2025
BS EN 17151-1 Plastics piping systems for non-pressure underground conveyance and storage of surface water Part 1: Test method determination long-term compression strength boxes
18/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30546940 DC:2025
BS EN 17152-1 Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used infiltration, attenuation Part 1: Specifications storm boxes made PP PVC-U
18/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30544094 DC:2025
BS EN 12805 LPG equipment and accessories - Automotive LPG components - Containers
18/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 4407:2025
Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
18/12/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
25/30499772 DC:2025
BS 5970 Installation of thermal insulation systems on pipework, ductwork and associated equipment for all applications in the temperature range of -40 °C to +700 °C .Code of practice
15/12/2025 - PDF DRM - Inglés - BSI
Más información42,00 € -
26/30512157 DC:2025
BS ISO 21026-1 Heat supply network — Vocabulary Part 1: System
15/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
PD CEN/TS 18209:2025
LPG equipment and accessories — Cylinders transportation racks controls
15/12/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS EN 12186:2025
Gas infrastructure — Gas pressure control stations for transmission and distribution — Functional requirements
15/12/2025 - PDF DRM - Inglés - BSI
Más información374,00 € -
BS EN 10284:2025
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
15/12/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 3601-2:2025 + Redline
Tracked Changes. Fluid power systems. O-rings Housing dimensions for general applications
12/12/2025 - PDF DRM - Inglés - BSI
Más información524,00 € -
25/30544520 DC:2025
BS EN 13480-2:2024/A1 Metallic industrial piping Part 2: Materials
11/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30515924 DC:2025
BS EN 13445-2:2021+A1:2023/A2 Unfired pressure vessels Part 2: Materials
11/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 3601-2:2025
Fluid power systems — O-rings Housing dimensions for general applications
8/12/2025 - PDF DRM - Inglés - BSI
Más información374,00 € -
25/30544517 DC:2025
BS EN 13480-5:2024/A1 Metallic industrial piping Part 5: Inspection and testing
4/12/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 13954:2025 + Redline
Tracked Changes. Plastics pipes and fittings. Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
28/11/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
25/30544514 DC:2025
BS EN 19:2023/A1 Industrial valves - Marking of metallic valves
27/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30490355 DC:2025
BS EN ISO 11300-4 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 4: Thermoplastic composite materials
24/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30480656 DC:2025
BS EN ISO 21010 Cryogenic vessels — Gas/material compatibility
24/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30480663 DC:2025
BS EN ISO 21029-1 Cryogenic vessels — Transportable vacuum insulated of not more than 1 000 litres volume Part 1: Design, fabrication, inspection and tests
24/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 13079:2025 + Redline
Tracked Changes. Devices to prevent pollution by backflow of potable water. Air gap with injector. Family A. Type D
21/11/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
404,00 €
-
BS ISO 13954:2025
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
20/11/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS ISO 5222-1:2025 + Redline
Tracked Changes. Heat recovery ventilators and energy ventilators. Testing calculating methods for performance factor Sensible heating seasonal factors of heat (HRVs)
17/11/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
BS ISO 13956:2025 + Redline
Tracked Changes. Plastics pipes and fittings. Decohesion test of polyethylene (PE) saddle fusion joints. Evaluation of ductility of fusion joint interface by tear test
17/11/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
BS EN ISO 24490:2025 + Redline
Tracked Changes. Cryogenic vessels. Centrifugal pumps for cryogenic service
14/11/2025 - PDF DRM - Inglés - BSI
Más información499,00 € -
25/30492653 DC:2025
BS EN ISO 13350 Fans — Performance testing of jet fans
14/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 13956:2025
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
11/11/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS EN 13079:2025
Devices to prevent pollution by backflow of potable water — Air gap with injector — Family A — Type D
10/11/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS ISO 13347-2:2025 + Redline
Tracked Changes. Fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method
7/11/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
BS EN 13476-1:2025
Plastics piping systems for non-pressure underground drains and sewers. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) General requirements performance characteristics
6/11/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS EN ISO 24490:2025
Cryogenic vessels — Centrifugal pumps for cryogenic service
6/11/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
25/30515635 DC:2025
BS EN 489-2 District heating pipes - Factory made flexible pipe systems - Joint casing systems
6/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30507081 DC:2025
BS EN 1762 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
6/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30512985 DC:2025
BS EN 14420-7 Hose fittings with clamp units Part 7: Cam locking couplings
6/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30530714 DC:2025
BS EN 14624 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
6/11/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 5222-1:2025
Heat recovery ventilators and energy ventilators. Testing calculating methods for performance factor Sensible heating seasonal factors of heat (HRVs)
4/11/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 13347-2:2025
Fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method
31/10/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
25/30502110 DC:2025
BS ISO 11500:2022/Amd 1 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle. Amendment 1
30/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30505825 DC:2025
BS EN 295-8 Vitrified clay pipe systems for drains and sewers Part 8: Requirements the use of vitrified components in rehabilitation drainage conditions application methods existing
23/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 18488:2025 + Redline
Tracked Changes. Polyethylene (PE) materials for piping systems. Determination of strain hardening modulus in relation to slow crack growth. Test method
23/10/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
24/30466238 DC:2025
BS ISO 19078 Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
22/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30547871 DC:2025
BS ISO 19078 Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
22/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 1555-2:2025 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
21/10/2025 - PDF DRM - Inglés - BSI
Más información443,00 € -
25/30474109 DC:2025
BS ISO 18869 Hydraulic fluid power — Test methods for couplings actuated with or without tools
20/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 13476-1:2025 + Redline
Tracked Changes. Plastics piping systems for non-pressure underground drains and sewers. Structured-wall of plasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) General requirements performance characteristics
16/10/2025 - PDF DRM - Inglés - BSI
Más información420,00 € -
25/30491899 DC:2025
BS ISO 17519 Gas cylinders — Refillable permanently mounted composite large tubes for transportation
16/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30499973 DC:2025
BS ISO 27327-1 Fans — Air curtain units Part 1: Laboratory methods of testing for aerodynamic performance rating
16/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 18488:2025
Polyethylene (PE) materials for piping systems. Determination of strain hardening modulus in relation to slow crack growth. Test method
16/10/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS EN 1555-4:2025 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves
16/10/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
PD CEN/TS 1401-2:2025 + Redline
Tracked Changes. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance the assessment of conformity
15/10/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
25/30500385 DC:2025
BS EN ISO 18489 Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
15/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 1555-1:2025 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
14/10/2025 - PDF DRM - Inglés - BSI
Más información443,00 € -
25/30501130 DC:2025
Draft BS EN 18213-1 District heating and district cooling pipes - Bonded single twin pipe systems for directly buried hot cold water networks Part 1: Qualification testing of fitter
10/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30512402 DC:2025
Draft BS EN 18213-2 District heating and district cooling pipes - Bonded single twin pipe systems for directly buried hot cold water networks Part 2: Qualification testing of PE-Welder
10/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 13476-1:2025
Plastics piping systems for non-pressure underground drains and sewers. Structured-wall of plasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) General requirements performance characteristics
9/10/2025 - PDF DRM - Inglés - BSI
Más información299,00 € -
BS EN 1555-1:2025
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
9/10/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS EN 1555-2:2025
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) Pipes
9/10/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS EN 1555-4:2025
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves
9/10/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 24690:2025
Glass reinforced thermosetting plastic (GRP) pipes. Test method for the determination of long-term pressure endurance strength
7/10/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
PD CEN/TS 1401-2:2025
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance the assessment of conformity
6/10/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
25/30515134 DC:2025
Draft BS EN 14564 Tanks for transport of dangerous goods - Terminology
3/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 16903:2025
Plastic piping systems buried outside the building structure. Environmental product declarations. Product category rules complementary to EN 15804
3/10/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS EN 16904:2025
Plastics piping systems inside the building structure. Environmental product declarations. Product category rules complementary to EN 15804
3/10/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
25/30497205 DC:2025
Draft BS ISO 24994 Plastics piping systems - Determination of selected metal and semi-metal migration values of plastic pipes, fittings and their joints
1/10/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
2.203,00 €
-
BS ISO 21684:2025
Fans. Laboratory test methods for air circulating fans
29/9/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
25/30516682 DC:2025
Draft BS EN 13160-4 Leak detection systems Part 4: Requirements and test/assessment methods for sensor-based leak
25/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30516688 DC:2025
BS EN 13160-3 Leak detection systems Part 3: Requirements and test/assessment methods for liquid tanks
25/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30516685 DC:2025
Draft BS EN 13160-2 Leak detection systems Part 2: Requirements and test/assessment methods for pressure vacuum
25/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30516691 DC:2025
Draft BS EN 13160-7 Leak detection systems Part 7: Requirements and test/assessment methods for interstitial spaces, leak linings jackets
25/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 10471:2025 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
19/9/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
25/30479473 DC:2025
BS ISO 3669 Vacuum technology — Dimensions of knife-edge flanges
19/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30505382 DC:2025
BS ISO 21360-4 Vacuum technology — Standard methods for measuring vacuum-pump performance Part 4: Turbomolecular vacuum pumps
18/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 10378:2025
Welded stainless steel square and rectangular tubes for mechanical and structural engineering and decorative use. Technical delivery conditions
12/9/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
25/30486261 DC:2025
BS EN ISO 23097 Industrial valves — Pneumatic part-turn actuators — General requirements
11/9/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 13616-2:2016+A1:2025
Overfill prevention devices for static tanks liquid fuels without a closure device
10/9/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS EN ISO 14246:2022+A1:2025
Gas cylinders. Cylinder valves. Manufacturing tests and examinations
9/9/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
25/30481842 DC:2025
BS EN 14015 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
4/9/2025 - PDF DRM - Inglés - BSI
Más información77,00 € -
BS ISO 8426-2:2025 + Redline
Tracked Changes. Hydraulic fluid power. Determination of derived displacement positive pumps and motors Zero-pressure intercept method
3/9/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
BS ISO 10471:2025
Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
2/9/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
BS ISO 8426-1:2025
Hydraulic fluid power. Determination of derived displacement positive pumps and motors Two-step Toet method
29/8/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 8426-2:2025
Hydraulic fluid power. Determination of derived displacement positive pumps and motors Zero-pressure intercept method
29/8/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
25/30503004 DC:2025
BS ISO 23648 Plastics - Fire performance test on water-filled plastic pipes
29/8/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
566,00 €
-
BS EN 13616-1:2025 + Redline
Tracked Changes. Overfill prevention devices for static tanks liquid fuels with closure device
26/8/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
25/30479463 DC:2025
BS ISO 27893 Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
26/8/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30521462 DC:2025
BS EN 12516-3 Industrial valves - Shell design strength Part 3: Experimental method
21/8/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30521465 DC:2025
BS EN 12266-1 Industrial valves - Testing of metallic Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements
21/8/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 13616-1:2025
Overfill prevention devices for static tanks liquid fuels with closure device
21/8/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
404,00 €
-
BS EN ISO 13341:2025 + Redline
Tracked Changes. Gas cylinders. Fitting of valves to gas cylinders
19/8/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
BS EN ISO 13341:2025
Gas cylinders. Fitting of valves to gas cylinders
12/8/2025 - PDF DRM - Inglés - BSI
Más información193,00 € -
25/30543263 DC:2025
BS EN ISO 18623-1 Air compressors and compressed air systems Part 1: compressor safety requirements
12/8/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30479466 DC:2025
BS ISO 3567 Vacuum gauges — Calibration by direct comparison with a reference gauge
8/8/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN ISO 18984:2025
Ball valves for thermoplastics piping systems for hot and cold water installations under pressure. Types, dimensions and requirements
7/8/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
25/30515381 DC:2025
BS EN ISO 21809-3 Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field joint
5/8/2025 - PDF DRM - Inglés - BSI
Más información42,00 € -
BS ISO 13347-1:2025 + Redline
Tracked Changes. Fans. Determination of fan sound power levels under standardized laboratory conditions General overview
4/8/2025 - PDF DRM - Inglés - BSI
Más información499,00 € -
BS EN 334:2019+A1:2024
Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
30/7/2025 - PDF DRM - Inglés - BSI
Más información404,00 € -
BS ISO 13347-1:2025
Fans. Determination of fan sound power levels under standardized laboratory conditions General overview
28/7/2025 - PDF DRM - Inglés - BSI
Más información355,00 € -
BS EN IEC 60335-2-80:2024+A11:2024
Household and similar electrical appliances. Safety Particular requirements for fans
25/7/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS ISO 13347-4:2025 + Redline
Tracked Changes. Fans. Determination of fan sound power levels under standardized laboratory conditions Sound intensity method
25/7/2025 - PDF DRM - Inglés - BSI
Más información443,00 € -
BS EN 14986:2024
Design of fans working in potentially explosive atmospheres
25/7/2025 - PDF DRM - Inglés - BSI
Más información374,00 € -
BS EN 1106:2022+A1:2023
Manually operated taps for gas burning appliances
23/7/2025 - PDF DRM - Inglés - BSI
Más información355,00 € -
BS 5911-1:2021
Concrete pipes and ancillary concrete Unreinforced reinforced (including jacking pipes) fittings with flexible joints (complementary to BS EN 1916:2002). Specification
23/7/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
PD CEN/TS 17152-4:2025 + Redline
Tracked Changes. Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used infiltration, attenuation Guidance structural design modular
21/7/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
BS EN ISO 18752:2025 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
21/7/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
BS ISO 13347-4:2025
Fans. Determination of fan sound power levels under standardized laboratory conditions Sound intensity method
17/7/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
BS ISO 7368:2025 + Redline
Tracked Changes. Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
16/7/2025 - PDF DRM - Inglés - BSI
Más información499,00 € -
BS EN ISO 18752:2025
Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
15/7/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
25/30502735 DC:2025
BS ISO 7685 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial ring stiffness
14/7/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30482146 DC:2025
BS ISO 6358-1:2013/Amd 2 Pneumatic fluid power — Determination of flow-rate characteristics components using compressible fluids Part 1: General rules and test methods for steady-state flow. AMENDMENT 2: Annex C - Evaluation measurement uncertaint
11/7/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30482149 DC:2025
BS ISO 6358-2:2019/Amd 1 Pneumatic fluid power — Determination of flow-rate characteristics components using compressible fluids Part 2: Alternative test methods - Amendment 1: compre
11/7/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30512315 DC:2025
BS EN 752:2017/A1 Drain and sewer systems outside buildings - Sewer system management
10/7/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
PD CEN/TS 17152-4:2025
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used infiltration, attenuation Guidance structural design modular
4/7/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 7368:2025
Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
4/7/2025 - PDF DRM - Inglés - BSI
Más información355,00 € -
25/30514755 DC:2025
BS EN 13953 LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
3/7/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30440238 DC:2025
BS EN 593 Industrial valves - Metallic butterfly valves
26/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 13348:2025 + Redline
Tracked Changes. Fans. Tolerances, methods of conversion and technical data presentation
25/6/2025 - PDF DRM - Inglés - BSI
Más información566,00 € -
BS ISO 12101:2025
Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Classification system and qualification procedures for type testing of stem seals for valves
24/6/2025 - PDF DRM - Inglés - BSI
Más información316,00 € -
25/30481894 DC:2025
BS ISO 25780 Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
24/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 12176-2:2025 + Redline
Tracked Changes. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Electrofusion
20/6/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
25/30511659 DC:2025
Draft BS EN 60704-2-7 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Part 2-7. Particular requirements fans
19/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30507395 DC:2025
BS ISO 12176-6 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems Part 6: Electrofusion Control Unit (ECU) function testing
19/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 24033:2025 + Redline
Tracked Changes. Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
19/6/2025 - PDF DRM - Inglés - BSI
Más información378,00 € -
25/30482152 DC:2025
BS ISO 20145 Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
18/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS ISO 12176-2:2025
Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Electrofusion
17/6/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS EN 1705:2025 + Redline
Tracked Changes. Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow
16/6/2025 - PDF DRM - Inglés - BSI
Más información271,00 € -
BS ISO 24033:2025
Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
16/6/2025 - PDF DRM - Inglés - BSI
Más información269,00 € -
BS ISO 13348:2025
Fans. Tolerances, methods of conversion and technical data presentation
12/6/2025 - PDF DRM - Inglés - BSI
Más información404,00 € -
25/30515408 DC:2025
BS EN IEC 60335-2-40/AMD1/FRAG2 Amendment 1 - Household and similar electrical appliances Safety Part 2-40: Particular requirements for heat pumps, air-conditioners dehumidifiers (Fragment 2)
6/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30506853 DC:2025
BS EN 1594:2024/A1 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
5/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30512988 DC:2025
BS EN 17649:2022/A1 Gas infrastructure - Safety Management System (SMS), Pipeline Integrity Management System (PIMS) and Compressor station integrity management system (CIMS) - Functional requirements
5/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
25/30483281 DC:2025
BS ISO 7986 Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of rod seals used in oil hydraulic reciprocating applications
5/6/2025 - PDF DRM - Inglés - BSI
Más información23,00 € -
BS EN 126:2025 + Redline
Tracked Changes. Safety and control devices for burners and appliances burning gaseous fuels. Multifunctional controls
4/6/2025 - PDF DRM - Inglés - BSI
Más información443,00 € -
BS EN ISO 15493:2003+A11:2025
Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
3/6/2025 - PDF DRM - Inglés - BSI
Más información404,00 € -
BS EN 10216-2:2024
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy with specified elevated temperature properties
3/6/2025 - PDF DRM - Inglés - BSI
Más información374,00 € -
BS EN 15714-4:2025 + Redline
Tracked Changes. Industrial valves. Actuators Hydraulic part-turn actuators for industrial Basic requirements
2/6/2025 - PDF DRM - Inglés - BSI
Más información443,00 €
