23.160 : Tecnología del vacío
-
BS ISO 21360-6:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Cryogenic vacuum pumps
14/12/2023 - PDF - Inglés -
Más información180,00 € -
PD ISO/TS 6737:2023
Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
7/12/2023 - PDF - Inglés -
Más información250,00 € -
BS ISO 21360-5:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Non-evaporable getter (NEG) vacuum pumps
30/11/2023 - PDF - Inglés -
Más información293,00 € -
DIN 28430:2023-09
Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam
1/9/2023 - PDF - Alemán -
Más información72,80 € -
22/30449834 DC:2022
BS ISO 21360-6. Vacuum technology. Standard methods for measuring vacuum-pump performance Part 6. Cryo vacuum pumps
5/12/2022 - PDF - Inglés -
Más información24,00 € -
22/30449831 DC:2022
BS ISO 21360-5. Vacuum technology. Standard methods for measuring vacuum-pump performance Part 5. NEG vacuum pumps
31/10/2022 - PDF - Inglés -
Más información24,00 € -
BS ISO 24477:2022
Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
20/8/2022 - PDF - Inglés -
Más información180,00 € -
65,89 €
-
ASTM E834-21
Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
1/4/2021 - PDF - Inglés -
Más información51,00 € -
ASTM E834-21 + Redline
Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
1/4/2021 - PDF - Inglés -
Más información61,00 € -
BS ISO 21358:2020 + Redline
Tracked Changes. Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
12/11/2020 - PDF - Inglés -
Más información197,00 € -
BS ISO 9803-1:2020 + Redline
Tracked Changes. Vacuum technology. Mounting dimensions of pipeline fittings Non knife-edge flange type
12/11/2020 - PDF - Inglés -
Más información197,00 € -
BS ISO 9803-2:2020 + Redline
Tracked Changes. Vacuum technology. Mounting dimensions of pipeline fittings Knife-edge flange type
12/11/2020 - PDF - Inglés -
Más información197,00 € -
BS ISO 2861:2020 + Redline
Tracked Changes. Vacuum technology. Dimensions of clamped-type quick-release couplings
12/11/2020 - PDF - Inglés -
Más información197,00 € -
BS ISO 21360-1:2020
Vacuum technology. Standard methods for measuring vacuum-pump performance General description
17/6/2020 - PDF - Inglés -
Más información293,00 € -
BS ISO 21360-2:2020
Vacuum technology. Standard methods for measuring vacuum-pump performance Positive displacement vacuum pumps
17/6/2020 - PDF - Inglés -
Más información250,00 € -
180,00 €
-
180,00 €
-
BS ISO 2861:2020
Vacuum technology. Dimensions of clamped-type quick-release couplings
21/2/2020 - PDF - Inglés -
Más información151,00 € -
BS ISO 21358:2020
Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
3/2/2020 - PDF - Inglés -
Más información151,00 € -
BS ISO 9803-2:2020
Vacuum technology. Mounting dimensions of pipeline fittings Knife-edge flange type
21/1/2020 - PDF - Inglés -
Más información151,00 € -
180,00 €
-
BS ISO 9803-1:2020
Vacuum technology. Mounting dimensions of pipeline fittings Non knife-edge flange type
16/1/2020 - PDF - Inglés -
Más información151,00 € -
180,00 €
-
NF ISO 21360-3, X10-510-3 (06/2019)
Vacuum technology - Standard methods for measuring vacuum pump performance - Part 3 : specific parameters for mechanical booster vacuum pumps
1/6/2019 - Papel - Francés -
Más información75,50 € -
BS ISO 20146:2019
Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
12/3/2019 - PDF - Inglés -
Más información250,00 € -
DIN 28431:2019-03
Vacuum technology - acceptance specifications for liquid ring vacuum pumps
1/3/2019 - PDF - Alemán -
Más información72,80 € -
BS ISO 21360-3:2019
Vacuum technology. Standard methods for measuring vacuum pump performance Specific parameters mechanical booster pumps
1/2/2019 - PDF - Inglés -
Más información250,00 € -
110,00 €
-
110,00 €
-
ISO 21360-3:2019
Vacuum technology
Standard methods for measuring vacuum pump performance
30/1/2019 - Papel - Francés -
Más información110,00 € -
ISO 21360-3:2019
Vacuum technology
Standard methods for measuring vacuum pump performance
30/1/2019 - Papel - Inglés -
Más información110,00 € -
NF ISO 21360-4, X10-510-4 (11/2018)
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 4 : Turbomolecular vacuum pumps
1/11/2018 - Papel - Francés -
Más información60,50 € -
BS ISO 21360-4:2018
Vacuum technology. Standard methods for measuring vacuum-pump performance Turbomolecular vacuum pumps
23/8/2018 - PDF - Inglés -
Más información180,00 € -
ISO 21360-4:2018 (R2024)
Vacuum technology
Standard methods for measuring vacuum-pump performance
31/7/2018 - Papel - Inglés -
Más información72,00 € -
ISO 21360-4:2018 (R2024)
Vacuum technology
Standard methods for measuring vacuum-pump performance
31/7/2018 - Papel - Francés -
Más información72,00 € -
PD ISO/TS 20177:2018
Vacuum technology. Vacuum gauges. Procedures to measure and report outgassing rates
13/6/2018 - PDF - Inglés -
Más información331,00 € -
199,00 €
-
PD ISO/TS 20175:2018
Vacuum technology. Vacuum gauges. Characterization of quadrupole mass spectrometers for partial pressure measurement
8/5/2018 - PDF - Inglés -
Más información250,00 € -
148,00 €
-
BS ISO 19685:2017
Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for Pirani gauges
27/9/2017 - PDF - Inglés -
Más información180,00 € -
110,00 €
-
DIN ISO 21360-1:2016-09
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description (ISO 21360-1:2012)
1/9/2016 - PDF - Alemán -
Más información99,35 € -
DIN ISO 21360-1:2016-09
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description (ISO 21360-1:2012)
1/9/2016 - PDF - Inglés -
Más información124,21 € -
GB/T 32218-2015
Vacuum technology―Test methods for leak rates of vacuum system (English Version)
10/12/2015 - PDF - Inglés -
Más información264,00 € -
GB/T 32221-2015
Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification (English Version)
10/12/2015 - PDF - Inglés -
Más información341,00 € -
JIS B 8329-2:2015
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 2: Positive displacement vacuum pumps
20/11/2015 - PDF - Japonés -
Más información25,00 € -
JIS B 8329-1:2015
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description
20/11/2015 - PDF - Japonés -
Más información41,86 € -
DIN ISO 3567:2015-05
Vacuum gauges - Calibration by direct comparison with a reference gauge (ISO 3567:2011)
1/5/2015 - PDF - Alemán -
Más información72,80 € -
ASTM E595-15(2021)
Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
1/5/2015 - PDF - Inglés -
Más información51,00 € -
DIN ISO 3567:2015-05
Vacuum gauges - Calibration by direct comparison with a reference gauge (ISO 3567:2011)
1/5/2015 - PDF - Inglés -
Más información91,12 € -
ASTM E595-15(2021) + Redline
Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
1/1/2015 - PDF - Inglés -
Más información61,00 € -
DIN 28429:2014-05
Vacuum technology - Acceptance specifications for ion getter pumps
1/5/2014 - PDF - Alemán -
Más información59,63 € -
BS ISO 3529-3:2014
Vacuum technology. Vocabulary. Total and partial pressure vacuum gauges
30/4/2014 - PDF - Inglés -
Más información180,00 € -
72,00 €
-
DIN EN 1012-3:2014-04
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
1/4/2014 - PDF - Inglés -
Más información252,71 € -
DIN EN 1012-3:2014-04
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors, German version EN 1012-3:2013
1/4/2014 - PDF - Alemán -
Más información201,96 € -
NBN EN 1012-3:2014
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
31/1/2014 - PDF - Inglés -
Más información205,00 € -
NBN EN 1012-3:2014
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
31/1/2014 - PDF - Francés -
Más información205,00 € -
NBN EN 1012-3:2014
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
31/1/2014 - PDF - Alemán -
Más información205,00 € -
JIS Z 8129:2014
Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges
20/1/2014 - PDF - Japonés -
Más información41,86 € -
UNE-EN 1012-3:2013 (R2019)
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - Inglés -
Más información137,00 € -
NF EN 1012-3, E51-290-3 (01/2014)
Compressors and vaccum pumps - Safety requirements - Part 3 : process compressors - Compresseurs et pompes à vide
1/1/2014 - Papel - Francés -
Más información185,50 € -
BS EN 1012-3:2013
Compressors and vacuum pumps. Safety requirements. Process compressors
30/11/2013 - PDF - Inglés -
Más información398,00 € -
0,00 €
-
NF ISO 27893, X10-525 (06/2013)
Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge - Technique du vide
1/6/2013 - Papel - Francés -
Más información75,50 € -
DIN 28400-3:2013-06
Vacuum technology - Terms and definitions - Part 3: Vacuum gauges
1/6/2013 - PDF - Alemán -
Más información72,80 € -
NF ISO 3567, X10-524 (06/2013)
Vacuum gauges - Calibration by direct comparison with a reference gauge - Manomètres
1/6/2013 - Papel - Francés -
Más información75,50 € -
BS ISO 14291:2012
Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers
31/8/2012 - PDF - Inglés -
Más información250,00 € -
ISO 14291:2012 (R2023)
Vacuum gauges
Definitions and specifications for quadrupole mass spectrometers
6/7/2012 - Papel - Inglés -
Más información110,00 € -
BS ISO 3567:2011
Vacuum gauges. Calibration by direct comparison with a reference gauge
31/1/2012 - PDF - Inglés -
Más información250,00 € -
ISO 3567:2011
Vacuum gauges
Calibration by direct comparison with a reference gauge
9/12/2011 - Papel - Inglés -
Más información110,00 € -
ISO 3567:2011
Vacuum gauges
Calibration by direct comparison with a reference gauge
9/12/2011 - Papel - Francés -
Más información110,00 € -
DIN EN 1012-2:2011-12
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
1/12/2011 - PDF - Inglés -
Más información124,21 € -
DIN EN 1012-2:2011-12
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps, German version EN 1012-2:1996+A1:2009
1/12/2011 - PDF - Alemán -
Más información99,35 € -
BS ISO 27893:2011
Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
31/8/2011 - PDF - Inglés -
Más información250,00 € -
110,00 €
-
110,00 €
-
UNE-EN 1012-1:2011
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
16/3/2011 - PDF - Inglés -
Más información98,40 € -
UNE-EN 1012-1:2011
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
16/3/2011 - PDF - Español -
Más información82,00 € -
DIN EN 1012-1:2011-02
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors, German version EN 1012-1:2010
1/2/2011 - PDF - Alemán -
Más información110,00 € -
DIN EN 1012-1:2011-02
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
1/2/2011 - PDF - Inglés -
Más información137,85 € -
GB/T 16709.1-2010
Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type (English Version)
23/12/2010 - PDF - Inglés -
Más información110,00 € -
GB/T 16709.2-2010
Vacuum technology- Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type (English Version)
23/12/2010 - PDF - Inglés -
Más información110,00 € -
NF EN 1012-1, E51-290-1 (12/2010)
Compressors and vacuum pumps - Safety requirements - Part 1 : air compressors - Compresseurs et pompes à vide
1/12/2010 - Papel - Francés -
Más información99,33 € -
BS EN 1012-1:2010
Compressors and vacuum pumps. Safety requirements. Air compressors
31/10/2010 - PDF - Inglés -
Más información293,00 € -
NBN EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
29/10/2010 - PDF - Alemán -
Más información163,00 € -
NBN EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
29/10/2010 - PDF - Inglés -
Más información163,00 € -
NBN EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
29/10/2010 - PDF - Francés -
Más información163,00 € -
BS ISO 27894:2009
Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges
31/3/2010 - PDF - Inglés -
Más información250,00 € -
BS ISO 27892:2010
Vacuum technology. Turbomolecular pumps. Measurement of rapid shutdown torque
28/2/2010 - PDF - Inglés -
Más información250,00 € -
UNE-EN 1012-2:1996+A1:2010 (R2019)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
17/2/2010 - PDF - Inglés -
Más información87,60 € -
UNE-EN 1012-2:1996+A1:2010 (R2019)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
17/2/2010 - PDF - Español -
Más información73,00 € -
180,00 €
-
110,00 €
-
110,00 €
-
ASTM E2734/E2734M-10(2018)
Standard Specification for Dimensions of Knife-Edge Flanges
1/1/2010 - PDF - Inglés -
Más información46,00 € -
ASTM E2734/E2734M-10(2018) + Redline
Standard Specification for Dimensions of Knife-Edge Flanges
1/1/2010 - PDF - Inglés -
Más información53,00 € -
BS EN 1012-2:1996+A1:2009
Compressors and vacuum pumps. Safety requirements Vacuum pumps
31/12/2009 - PDF - Inglés -
Más información293,00 € -
NF EN 1012-2/IN1, E51-290-2/IN1 (12/2009)
Compressors and vacuum pumps - Safety requirements - Part 2 : vacuum pumps - Compresseurs et pompes à vide
1/12/2009 - Papel - Francés -
Más información23,00 € -
NF EN 1012-2+A1, E51-290-2 (12/2009)
Compressors and vacuum pumps - Safety requirements - Part 2 : Vacuum pumps - Compresseurs et pompes à vide
1/12/2009 - Papel - Francés -
Más información86,67 € -
72,00 €
-
148,00 €
-
NBN EN 1012-2+A1:2010
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
20/11/2009 - PDF - Alemán -
Más información142,00 € -
NBN EN 1012-2+A1:2010
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
20/11/2009 - PDF - Inglés -
Más información142,00 € -
NBN EN 1012-2+A1:2010
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
20/11/2009 - PDF - Francés -
Más información142,00 € -
JIS B 8328:2009 (R2014)
Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics
24/9/2009 - PDF - Japonés -
Más información25,00 € -
25,00 €
-
DIN EN ISO 2151:2009-01
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004), German version EN ISO 2151:2008
1/1/2009 - PDF - Alemán -
Más información99,35 € -
DIN EN ISO 2151:2009-01
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004), German version EN ISO 2151:2008
1/1/2009 - PDF - Inglés -
Más información124,21 € -
1.221,00 €
-
ASTM F2647-07(2023) + Redline
Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
1/1/2007 - PDF - Inglés -
Más información65,00 € -
ASTM D4991-07(2023) + Redline
Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
1/1/2007 - PDF - Inglés -
Más información57,00 € -
ASTM F2647-07(2023)
Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
1/1/2007 - PDF - Inglés -
Más información54,00 € -
ASTM D4991-07(2023)
Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
1/1/2007 - PDF - Inglés -
Más información48,00 € -
36,27 €
-
DIN 28400-8:1997-11
Vacuum technology - Terms and definitions - Part 8: Vacuum systems, components and accessories
1/11/1997 - PDF - Alemán -
Más información45,98 € -
ISO 1608-1:1993 (R2022)
Vapour vacuum pumps
Measurement of performance characteristics
25/11/1993 - Papel - Inglés -
Más información48,00 € -
ISO 1608-1:1993 (R2022)
Vapour vacuum pumps
Measurement of performance characteristics
25/11/1993 - Papel - Francés -
Más información48,00 € -
DIN 28400-1:1990-05
Vacuum technology, terms and definitions, general terms
1/5/1990 - PDF - Inglés, Francés, Alemán -
Más información52,90 € -
ISO 1608-2:1989
Vapour vacuum pumps
Measurement of performance characteristics
30/11/1989 - Papel - Francés -
Más información48,00 € -
ISO 1608-2:1989
Vapour vacuum pumps
Measurement of performance characteristics
30/11/1989 - Papel - Inglés -
Más información48,00 € -
57,57 €
-
45,98 €
-
DIN 28403:1986-09
Vacuum technology, quick release couplings, clamped type couplings
1/9/1986 - PDF - Inglés -
Más información40,56 € -
DIN 28403:1986-09
Vacuum technology, quick release couplings, clamped type couplings
1/9/1986 - PDF - Alemán -
Más información32,34 € -
DIN 28427:1983-02
Vacuum technology, acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid <1 mbar
1/2/1983 - PDF - Alemán -
Más información52,90 € -
DIN 28400 Beiblatt 1:1982-10
Vacuum technology, terms and definitions, alphabetical index
1/10/1982 - PDF - Alemán -
Más información85,79 € -
22,99 €
-
DIN 28400-5:1981-03
Vacuum technology, terms and definitions, vacuum drying and lyophilisation
1/3/1981 - PDF - Alemán -
Más información45,98 € -
DIN 28400-6:1980-10
Vacuum technology, terms and definitions, surface analysis techniques
1/10/1980 - PDF - Alemán -
Más información45,98 € -
65,89 €
-
ISO 3530:1979 (R2021)
Vacuum technology
Mass-spectrometer-type leak-detector calibration
1/9/1979 - Papel - Inglés -
Más información72,00 € -
ISO 3530:1979 (R2021)
Vacuum technology
Mass-spectrometer-type leak-detector calibration
1/9/1979 - Papel - Francés -
Más información72,00 € -
DIN 28400-7:1978-07
Vakuum technology, terms and definitions, vacuum metallurgie
1/7/1978 - PDF - Alemán -
Más información39,35 € -
22,99 €
-
Adjunct to E595 Test Method for Total Mass Loss and Collected Volatile
Condensable Materials from Outgassing in a Vacuum Environment
25/4/2024 - Papel - Inglés -
Más información110,66 €