23.040.10 : Caños de fundición de hierro y acero
-
ASTM A335/A335M-24 + Redline
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
1/4/2024 - PDF - Inglés -
Más información79,00 € -
ASTM A333/A333M-24 + Redline
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
1/4/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A335/A335M-24
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
1/4/2024 - PDF - Inglés -
Más información66,00 € -
DIN EN 10378:2024-04
Welded stainless steel square and rectangular tubes for mechanical, engineering and decorative use - Technical delivery conditions, German and English version prEN 10378:2024
1/4/2024 - PDF - Inglés, Alemán -
Más información99,35 € -
ASTM A333/A333M-24
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
1/4/2024 - PDF - Inglés -
Más información60,00 € -
BS ISO 16132:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
22/3/2024 - PDF - Inglés -
Más información326,00 € -
BS ISO 16132:2024
Ductile iron pipes and fittings. Seal coats for cement mortar linings
12/3/2024 - PDF - Inglés -
Más información250,00 € -
ASTM A813/A813M-24
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A270/A270M-24
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A369/A369M-24 + Redline
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A249/A249M-24 + Redline
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A688/A688M-24
Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A179/A179M-24
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
1/3/2024 - PDF - Inglés -
Más información52,00 € -
ASTM A312/A312M-24 + Redline
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
1/3/2024 - PDF - Inglés -
Más información79,00 € -
ASTM A53/A53M-24 + Redline
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
1/3/2024 - PDF - Inglés -
Más información103,00 € -
ASTM A409/A409M-24
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A813/A813M-24 + Redline
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A270/A270M-24 + Redline
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A790/A790M-24
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A358/A358M-24
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A688/A688M-24 + Redline
Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A179/A179M-24 + Redline
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
1/3/2024 - PDF - Inglés -
Más información63,00 € -
ASTM A369/A369M-24
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A249/A249M-24
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
1/3/2024 - PDF - Inglés -
Más información60,00 € -
ASTM A409/A409M-24 + Redline
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A312/A312M-24
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
1/3/2024 - PDF - Inglés -
Más información66,00 € -
ASTM A53/A53M-24
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
1/3/2024 - PDF - Inglés -
Más información86,00 € -
ASTM A790/A790M-24 + Redline
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
1/3/2024 - PDF - Inglés -
Más información71,00 € -
ASTM A358/A358M-24 + Redline
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
1/3/2024 - PDF - Inglés -
Más información71,00 € -
PD CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
26/2/2024 - PDF - Inglés -
Más información348,00 € -
CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation
21/2/2024 - PDF - Inglés -
Más información184,00 € -
BS ISO 4179:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
13/2/2024 - PDF - Inglés -
Más información382,00 € -
BS ISO 4179:2024
Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
7/2/2024 - PDF - Inglés -
Más información180,00 € -
BS EN 253:2019+A1:2023
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
12/1/2024 - PDF - Inglés -
Más información331,00 € -
411,00 €
-
UNE 36224-1:2023
Non-alloy steel tubes and accessories for the conveyance of aqueous liquids, including water for human consumption. Simplified criteria for classification by pressure classes. Part 1: Tubes
27/12/2023 - PDF - Español -
Más información52,00 € -
UNE-ISO 23991:2023
Irrigation applications of ductile iron pipelines — Product design and installation.
27/12/2023 - PDF - Español -
Más información82,00 € -
NBN EN 253:2019+A1:2023
Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
21/12/2023 - PDF - Francés -
Más información163,00 € -
NBN EN 253:2019+A1:2023
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
21/12/2023 - PDF - Inglés -
Más información163,00 € -
NF EN 253+A1, E39-011 (12/2023)
Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
1/12/2023 - Papel - Francés -
Más información108,33 € -
ASTM A450/A450M-23 + Redline
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
1/11/2023 - PDF - Inglés -
Más información71,00 € -
NF EN 13480-4/A2, E86-700-4/A2 (11/2023)
Metallic industrial piping - Part 4 : Fabrication and installation
1/11/2023 - Papel - Francés -
Más información31,00 € -
ASTM A381/A381M-23
Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
1/11/2023 - PDF - Inglés -
Más información52,00 € -
ASTM A450/A450M-23
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
1/11/2023 - PDF - Inglés -
Más información60,00 € -
NF EN 13480-4/A1, E86-700-4/A1 (11/2023)
Tuyauteries industrielles métalliques - Partie 4 : fabrication et installation
1/11/2023 - Papel - Francés -
Más información31,00 € -
ASTM A381/A381M-23 + Redline
Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
1/11/2023 - PDF - Inglés -
Más información63,00 € -
UNE-EN 14525:2023
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PVC-O, PE, Fibre-cement
11/10/2023 - PDF - Español -
Más información78,00 € -
UNE-EN 14525:2023
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PVC-O, PE, Fibre-cement
11/10/2023 - PDF - Inglés -
Más información93,60 € -
ASTM A519/A519M-23
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
1/9/2023 - PDF - Inglés -
Más información66,00 € -
ASTM A999/A999M-23
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
1/9/2023 - PDF - Inglés -
Más información60,00 € -
ASTM A519/A519M-23 + Redline
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
1/9/2023 - PDF - Inglés -
Más información79,00 € -
ASTM A999/A999M-23 + Redline
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
1/9/2023 - PDF - Inglés -
Más información72,00 € -
PR NF EN 15698-2, E39-017-2PR (08/2023)
Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pour les réseaux d'eau chaude enterrés directement - Partie 2 : assemblages de raccords et d'appareils de robinetterie manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
1/8/2023 - Papel - Inglés, Francés -
Más información80,50 € -
PR NF EN 15698-1, E39-017-1PR (08/2023)
Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pré-isolés pour les réseaux d'eau chaude enterrés directement - Partie 1 : assemblages de bitubes manufacturés pour tube de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
1/8/2023 - Papel - Inglés, Francés -
Más información80,50 € -
NBN ISO 24131-1:2023
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining ISO 24131-1:2023
21/6/2023 - PDF - Inglés -
Más información89,00 € -
NBN ISO 24131-2:2023
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining ISO 24131-2:2023
21/6/2023 - PDF - Inglés -
Más información89,00 € -
23/30461309 DC:2023
BS ISO 16132. Ductile iron pipes and fittings. Seal coats for cement mortar linings
7/6/2023 - PDF - Inglés -
Más información24,00 € -
PR NF EN 17970, A48-970PR (06/2023)
Tuyaux en fonte ductile - Assemblages automatiques pour systèmes de tuyaux en fonte ductile - Résistance à la pénétration des racines - Exigences et méthodes d'essai
1/6/2023 - Papel - Inglés, Francés -
Más información56,00 € -
PR NF EN 10216-2, A49-200-2PR (06/2023)
Tubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 2: Tubes en acier non allié et allié avec caractéristiques spécifiées à température élevée
1/6/2023 - Papel - Inglés, Francés -
Más información125,00 € -
UNE-EN 10357:2023
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
24/5/2023 - PDF - Español -
Más información60,00 € -
UNE-EN 10357:2023
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
24/5/2023 - PDF - Inglés -
Más información72,00 € -
DIN EN 17970:2023-05
Ductile iron pipes - Push-in joints for ductile iron pipe systems - Resistance against root intrusion - Requirements and test methods, German and English version prEN 17970:2023
1/5/2023 - PDF - Inglés, Alemán -
Más información65,89 € -
ASTM A1119/A1119M-23a + Redline
Standard Specification for Welded Partially Corrugated Stainless Steel Tube for Potable Water and General Service
1/5/2023 - PDF - Inglés -
Más información65,00 € -
ASTM A213/A213M-23 + Redline
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
1/5/2023 - PDF - Inglés -
Más información72,00 € -
DIN EN 10216-2:2023-05
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German and English version prEN 10216-2:2023
1/5/2023 - PDF - Inglés, Alemán -
Más información120,84 € -
ASTM A1119/A1119M-23a
Standard Specification for Welded Partially Corrugated Stainless Steel Tube for Potable Water and General Service
1/5/2023 - PDF - Inglés -
Más información54,00 € -
ASTM A213/A213M-23
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
1/5/2023 - PDF - Inglés -
Más información60,00 € -
23/30466158 DC:2023
BS EN 17970. Ductile iron pipes. Push-in joints for ductile iron pipe systems. Resistance against root intrusion. Requirements and test methods
18/4/2023 - PDF - Inglés -
Más información24,00 € -
23/30468096 DC:2023
BS EN 10216-2. Seamless steel tubes for pressure purposes. Technical delivery conditions Part 2. Non-alloy and alloy with specified elevated temperature properties
11/4/2023 - PDF - Inglés -
Más información24,00 € -
BS ISO 24131-2:2023
Internal protection by polymeric lining for ductile iron pipes. Requirements and test methods Epoxy
5/4/2023 - PDF - Inglés -
Más información180,00 € -
BS ISO 24131-1:2023
Internal protection by polymeric lining for ductile iron pipes. Requirements and test methods Polyurethane
5/4/2023 - PDF - Inglés -
Más información250,00 € -
PR NF EN 10217-1/A1, A49-201-1/A1PR (03/2023)
Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1 : tubes en acier non allié, soudés électriquement et soudés à l'arc immergé, avec caractéristiques spécifiées à température ambiante
1/3/2023 - Papel - Inglés, Francés -
Más información45,00 € -
23/30430401 DC:2023
BS ISO 4179. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
21/2/2023 - PDF - Inglés -
Más información24,00 € -
NBN ISO 4370:2023
Environmental life cycle assessment and recycling of ductile iron pipes for water applications ISO 4370:2022
1/2/2023 - PDF - Inglés -
Más información89,00 € -
DIN EN 10217-1/A1:2023-02
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German and English version EN 10217-1:2019/prA1:2023
1/2/2023 - PDF - Inglés, Alemán -
Más información39,35 € -
NBN ISO 23991:2023
Irrigation applications of ductile iron pipelines — Product design and installation ISO 23991:2022
1/2/2023 - PDF - Inglés -
Más información142,00 € -
NBN ISO 23991:2023
Canalisations en fonte ductile pour l'irrigation — Conception des produits et installation ISO 23991:2022
1/2/2023 - PDF - Francés -
Más información142,00 € -
23/30465607 DC:2023
BS EN 10217-1 AMD1. Welded steel tubes for pressure purposes. Technical delivery conditions Part 1. Electric welded and submerged arc non-alloy with specified room temperature properties
19/1/2023 - PDF - Inglés -
Más información24,00 € -
VdS 2100-45:2023-01
VdS Guidelines for Water Extinguishing Systems - Polymer Coated Pipelines - Requirements and Test Methods
1/1/2023 - - -
Más información26,88 € -
ASTM Volume 01.01 - Multi-User - Single-Site Online
Steel–Piping, Tubing, Fittings
The subscription ends 12 months from the day your order is processed.
1/1/2023 - Internet - Inglés -
Más información958,55 € -
NF EN 13480-3V1/A5, E86-700-3/A5 (12/2022)
Tuyauteries industrielles métalliques - Partie 3 : conception et calcul
1/12/2022 - Papel - Francés -
Más información78,50 € -
NF EN 17800, A48-800 (12/2022)
Coût du cycle de vie (CCV) et analyse du cycle de vie (ACV) pour les émissions de CO2 dans les systèmes de canalisations en fonte ductile
1/12/2022 - Papel - Francés -
Más información86,67 € -
ASTM A376/A376M-22
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
1/11/2022 - PDF - Inglés -
Más información54,00 € -
ASTM A376/A376M-22 + Redline
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
1/11/2022 - PDF - Inglés -
Más información65,00 € -
BS EN 14525:2022
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
31/10/2022 - PDF - Inglés -
Más información293,00 € -
BS EN 14525:2022 + Redline
Tracked Changes. Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
28/10/2022 - PDF - Inglés -
Más información382,00 € -
24,00 €
-
ASTM A674-22 + Redline
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe
1/10/2022 - PDF - Inglés -
Más información65,00 € -
DIN EN 10357:2022-10
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry, German version EN 10357:2022
1/10/2022 - PDF - Alemán -
Más información59,63 € -
ASTM B690-22
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy Seamless Pipe and Tube
1/10/2022 - PDF - Inglés -
Más información48,00 € -
ASTM A674-22
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe
1/10/2022 - PDF - Inglés -
Más información54,00 € -
ASTM B690-22 + Redline
Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy Seamless Pipe and Tube
1/10/2022 - PDF - Inglés -
Más información57,00 € -
BS EN 10357:2022 + Redline
Tracked Changes. Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
29/9/2022 - PDF - Inglés -
Más información235,00 € -
BS EN 10357:2022
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
8/9/2022 - PDF - Inglés -
Más información180,00 € -
SAE J 526:2022-09-08
Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming, and Brazing
8/9/2022 - PDF - Inglés -
Más información66,00 € -
ASTM A139/A139M-22 + Redline
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
1/9/2022 - PDF - Inglés -
Más información61,00 € -
ASTM A587-22 + Redline
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
1/9/2022 - PDF - Inglés -
Más información65,00 € -
ASTM A139/A139M-22
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
1/9/2022 - PDF - Inglés -
Más información51,00 € -
ASTM A587-22
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
1/9/2022 - PDF - Inglés -
Más información54,00 € -
NBN EN 10357:2022
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
26/8/2022 - PDF - Inglés -
Más información58,00 € -
NBN EN 10357:2022
Tubes soudés longitudinalement en acier inoxydable austénitique, ferritique et austéno-ferritique pour l'industrie alimentaire et chimique
26/8/2022 - PDF - Francés -
Más información58,00 € -
NBN EN 10357:2022
Austenitische, austenitisch-ferritische und ferritische längsnahtgeschweißte Rohre aus nichtrostendem Stahl für die Lebensmittel- und chemische Industrie
26/8/2022 - PDF - Alemán -
Más información58,00 € -
PD ISO/TR 4340:2022
Water aggressiveness evaluation and optimized lining choice
18/8/2022 - PDF - Inglés -
Más información250,00 € -
BS ISO 4370:2022
Environmental life cycle assessment and recycling of ductile iron pipes for water applications
4/8/2022 - PDF - Inglés -
Más información250,00 € -
PR NF EN 253/A1, E39-011/A1PR (08/2022)
Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
1/8/2022 - Papel - Inglés, Francés -
Más información56,00 € -
NF EN 10357, A49-249 (08/2022)
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
1/8/2022 - Papel - Francés -
Más información60,67 € -
UNE 53929:2022
Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
20/7/2022 - PDF - Español -
Más información93,00 € -
DIN EN 253/A1:2022-07
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene, German and English version EN 253:2019/prA1:2022
1/7/2022 - PDF - Inglés, Alemán -
Más información45,98 € -
22/30444825 DC:2022
BS EN 253 AMD1. District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
16/6/2022 - PDF - Inglés -
Más información24,00 € -
NBN ISO 21052:2022
Restrained joint systems for ductile iron pipelines ? Calculation rules for lengths to be restrained
13/6/2022 - PDF - Francés -
Más información121,00 € -
NBN ISO 21052:2022
Restrained joint systems for ductile iron pipelines — Calculation rules for lengths to be restrained ISO 21052:2021
13/6/2022 - PDF - Inglés -
Más información121,00 € -
UNE-EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
8/6/2022 - PDF - Español -
Más información103,00 € -
UNE-EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
8/6/2022 - PDF - Inglés -
Más información123,60 € -
ASTM E2096/E2096M-22
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
1/6/2022 - PDF - Inglés -
Más información51,00 € -
DIN EN 13941-2:2022-06
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation, German version EN 13941-2:2019+A1:2021
1/6/2022 - PDF - Alemán -
Más información184,58 € -
ASTM A798/A798M-22
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
1/6/2022 - PDF - Inglés -
Más información54,00 € -
ASTM E2096/E2096M-22 + Redline
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
1/6/2022 - PDF - Inglés -
Más información61,00 € -
ASTM A798/A798M-22 + Redline
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
1/6/2022 - PDF - Inglés -
Más información65,00 € -
DIN EN 13941-1:2022-06
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design, German version EN 13941-1:2019+A1:2021
1/6/2022 - PDF - Alemán -
Más información246,73 € -
BS ISO 23991:2022
Irrigation applications of ductile iron pipelines. Product design and installation
16/5/2022 - PDF - Inglés -
Más información293,00 € -
BS EN 877:2021 + Redline
Tracked Changes. Cast iron pipe systems and their components for the evacuation of water from works. characteristics and test methods
11/5/2022 - PDF - Inglés -
Más información454,00 € -
NF ISO 23991, A48-991 (05/2022)
Irrigation applications of ductile iron pipelines - Product design and installation
1/5/2022 - Papel - Francés -
Más información99,33 € -
BS ISO 21052:2021
Restrained joint systems for ductile iron pipelines. Calculation rules for lengths to be restrained
1/4/2022 - PDF - Inglés -
Más información293,00 € -
22/30437589 DC:2022
BS ISO 24131-1. Internal protection by polymeric lining for ductile iron pipes Part 1. polyurethane
28/3/2022 - PDF - Inglés -
Más información24,00 € -
22/30437592 DC:2022
BS ISO 24131-2. Internal protection by polymeric lining for ductile iron pipes Part 2. epoxy
28/3/2022 - PDF - Inglés -
Más información24,00 € -
ASTM E213-22 + Redline
Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
1/2/2022 - PDF - Inglés -
Más información68,00 € -
DIN 28177:2022-02
Structural tube (dimple tube) for heat transfer on process equipment - Dimensions and materials
1/2/2022 - PDF - Alemán -
Más información59,63 € -
UNE-EN 13941-1:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design (Endorsed by Asociación Española de Normalización in February of 2022.)
1/2/2022 - PDF - Inglés -
Más información174,00 € -
PR NF EN 15542, A48-854PR (02/2022)
Tuyaux, raccords et accessoires en fonte ductile - Revêtement extérieur en mortier de ciment pour tuyaux - Prescriptions et méthodes d'essais
1/2/2022 - Papel - Inglés, Francés -
Más información74,00 € -
UNE-EN 13941-2:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation (Endorsed by Asociación Española de Normalización in February of 2022.)
1/2/2022 - PDF - Inglés -
Más información131,00 € -
ASTM E213-22
Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
1/2/2022 - PDF - Inglés -
Más información57,00 € -
BS EN 10217-7:2021 + Redline
Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions Stainless
27/1/2022 - PDF - Inglés -
Más información432,00 € -
BS EN 13941-2:2019+A1:2021
District heating pipes. Design and installation of thermal insulated bonded single twin pipe systems for directly buried hot water networks Installation
7/1/2022 - PDF - Inglés -
Más información377,00 € -
BS EN 13941-1:2019+A1:2021
District heating pipes. Design and installation of thermal insulated bonded single twin pipe systems for directly buried hot water networks
7/1/2022 - PDF - Inglés -
Más información449,00 € -
VdS 2100-45:2022-01
VdS Guidelines for Water Extinguishing Systems - Polymer Coated Pipelines - Requirements and Test Methods
1/1/2022 - - -
Más información26,88 € -
UNE-EN 10217-7:2021
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
29/12/2021 - PDF - Inglés -
Más información104,40 € -
UNE-EN 10216-5:2021
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
29/12/2021 - PDF - Inglés -
Más información116,40 € -
UNE-EN 10217-7:2021
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
29/12/2021 - PDF - Español -
Más información87,00 € -
UNE-EN 10216-5:2021
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
29/12/2021 - PDF - Español -
Más información97,00 € -
NBN EN 13941-2:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation
18/12/2021 - PDF - Francés -
Más información205,00 € -
NBN EN 13941-1:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
18/12/2021 - PDF - Alemán -
Más información205,00 € -
NBN EN 13941-2:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation
18/12/2021 - PDF - Inglés -
Más información205,00 € -
NBN EN 13941-1:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
18/12/2021 - PDF - Inglés -
Más información205,00 € -
NBN EN 13941-1:2019+A1:2021
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design
18/12/2021 - PDF - Francés -
Más información205,00 € -
BS EN 10216-5:2021 + Redline
Tracked Changes. Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless
6/12/2021 - PDF - Inglés -
Más información454,00 € -
DVGW G 466-1:2021-12
High Pressure Gas Steel Pipelines for a Design Pressure of more than 16 bar, Operation and Maintenance
1/12/2021 - PDF - Alemán -
Más información88,96 € -
DIN 4927:2021-12
Flanged steel rising pipes for raising of water - Nominal diameter 50 to 200.
1/12/2021 - PDF - Alemán -
Más información45,98 € -
NF EN 13941-1+A1, E39-010-1 (12/2021)
Tuyaux de chauffage urbain - Conception et installation des systèmes bloqués de monotubes ou bitubes isolés thermiquement pour les réseaux d'eau chaude enterrés directement - Partie 1 : conception
1/12/2021 - Papel - Francés -
Más información206,00 € -
NF ISO 21052, A48-886 (12/2021)
Restrained joint systems for ductile iron pipelines - Calculation rules for lengths to be restrained
1/12/2021 - Papel - Francés -
Más información86,67 € -
NF EN 13941-2+A1, E39-010-2 (12/2021)
Tuyaux de chauffage urbain - Conception et installation des systèmes bloqués de tuyaux monotubes et bitubes isolés thermiquement pour les réseaux d'eau chaude enterrés directement - Partie 2 : installation
1/12/2021 - Papel - Francés -
Más información167,33 € -
BS EN 877:2021
Cast iron pipe systems and their components for the evacuation of water from works. characteristics and test methods
4/11/2021 - PDF - Inglés -
Más información348,00 € -
NF EN 13941-1/IN1, E39-010-1/IN1 (11/2021)
Tuyaux de chauffage urbain - Conception et installation des systèmes bloqués de monotubes ou bitubes isolés thermiquement pour les réseaux d'eau chaude enterrés directement - Partie 1 : conception
1/11/2021 - Papel - Francés -
Más información25,67 € -
ASTM A511/A511M-21a
Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
1/11/2021 - PDF - Inglés -
Más información57,00 € -
NF EN 12732, M50-022 (11/2021)
Gas infrastructure - Welding steel pipework - Functional requirements
1/11/2021 - Papel - Francés -
Más información154,67 € -
NF EN 13941-2/IN1, E39-010-2/IN1 (11/2021)
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2 : Installation
1/11/2021 - Papel - Francés -
Más información25,67 € -
ASTM A511/A511M-21a + Redline
Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
1/11/2021 - PDF - Inglés -
Más información68,00 € -
NF EN 13480-5/A2, E86-700-5/A2 (10/2021)
Metallic industrial piping - Part 5 : Inspection and testing
1/10/2021 - Papel - Francés -
Más información31,00 € -
48,00 €
-
NF EN 877, A48-720 (10/2021)
Cast iron pipes systems for the evacuation of water from works - Characteristics and test methods
1/10/2021 - Papel - Francés -
Más información130,67 € -
DVGW G 463:2021-10
High Pressure Gas Steel Pipelines for a Design Pressure of More Than 16 bar, Design and Construction
1/10/2021 - - -
Más informaciónDe: 88,96 € -
NF ISO 21051, A48-051 (09/2021)
Construction and installation of ductile iron pipeline system
1/9/2021 - Papel - Francés -
Más información130,67 € -
NF EN 13480-3 V1/A4, E86-700-3/A4 (09/2021)
Metallic industrial piping - Part 3 : Design and calculation
1/9/2021 - Papel - Francés -
Más información34,67 € -
ASTM A847/A847M-21 + Redline
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
1/9/2021 - PDF - Inglés -
Más información61,00 € -
ASTM A847/A847M-21
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
1/9/2021 - PDF - Inglés -
Más información51,00 € -
DVGW C 260:2021-08
Eigenschaften von Kohlenstoffdioxid und Kohlenstoffdioxidströmen
10/8/2021 - PDF - Alemán -
Más información65,18 € -
ASTM A501/A501M-21
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
1/8/2021 - PDF - Inglés -
Más información51,00 € -
ASTM A618/A618M-21
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
1/8/2021 - PDF - Inglés -
Más información51,00 € -
ASTM A501/A501M-21 + Redline
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
1/8/2021 - PDF - Inglés -
Más información61,00 € -
DVGW C 463:2021-08
Kohlenstoffdioxidleitungen aus Stahlrohren - Planung und Errichtung
1/8/2021 - PDF - Alemán -
Más información65,18 € -
ASTM A618/A618M-21 + Redline
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
1/8/2021 - PDF - Inglés -
Más información61,00 € -
API Std 1104:2021
Welding of Pipelines and Related Facilities, 22nd Edition, Includes Errata 1 (2023)
1/7/2021 - PDF sécurisé - Inglés -
Más información452,00 € -
NBN ISO 16132:2021
Ductile iron pipes and fittings — Seal coats for cement mortar linings ISO 16132:2016
2/6/2021 - PDF - Inglés -
Más información89,00 € -
DIN EN 10216-5:2021-06
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes, German version EN 10216-5:2021
1/6/2021 - PDF - Alemán -
Más información115,33 € -
DIN EN 10217-7:2021-06
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes, German version EN 10217-7:2021
1/6/2021 - PDF - Alemán -
Más información110,00 € -
UNE-EN 14628-1:2021
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
26/5/2021 - PDF - Español -
Más información74,00 € -
UNE-EN 14628-1:2021
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
26/5/2021 - PDF - Inglés -
Más información88,80 € -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
19/5/2021 - PDF - Inglés -
Más información40,80 € -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
19/5/2021 - PDF - Español -
Más información34,00 € -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
19/5/2021 - PDF - Español -
Más información34,00 € -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
19/5/2021 - PDF - Español -
Más información34,00 € -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
19/5/2021 - PDF - Inglés -
Más información40,80 € -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
19/5/2021 - PDF - Inglés -
Más información40,80 € -
BS EN 10217-4:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy with specified low temperature properties
14/5/2021 - PDF - Inglés -
Más información293,00 € -
BS EN 10217-2:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy and alloy with specified elevated temperature properties
14/5/2021 - PDF - Inglés -
Más información293,00 € -
BS EN 10217-7:2021
Welded steel tubes for pressure purposes. Technical delivery conditions Stainless
14/5/2021 - PDF - Inglés -
Más información331,00 € -
BS EN 10217-5:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy with specified elevated temperature properties
14/5/2021 - PDF - Inglés -
Más información331,00 € -
BS EN 10217-3:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded and submerged arc alloy fine grain with specified room, elevated low temperature properties
14/5/2021 - PDF - Inglés -
Más información348,00 € -
BS EN 10217-6:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy with specified low temperature properties
14/5/2021 - PDF - Inglés -
Más información293,00 € -
NBN ISO 8180:2021
Ductile iron pipelines — Polyethylene sleeving for site application ISO 8180:2020
13/5/2021 - PDF - Inglés -
Más información89,00 € -
BS EN 10217-1:2019
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded and submerged arc non-alloy with specified room temperature properties
13/5/2021 - PDF - Inglés -
Más información331,00 € -
UNE-EN 15655-2:2021
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
12/5/2021 - PDF - Inglés -
Más información81,60 € -
UNE-EN 15655-2:2021
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
12/5/2021 - PDF - Español -
Más información68,00 € -
BS EN 10216-5:2021
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless
5/5/2021 - PDF - Inglés -
Más información348,00 € -
ASTM A872/A872M-21 + Redline
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
1/5/2021 - PDF - Inglés -
Más información53,00 € -
ASTM A660/A660M-21 + Redline
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
1/5/2021 - PDF - Inglés -
Más información53,00 € -
ASTM A872/A872M-21
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
1/5/2021 - PDF - Inglés -
Más información46,00 € -
ASTM A660/A660M-21
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
1/5/2021 - PDF - Inglés -
Más información46,00 € -
NBN EN 10216-5:2021
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
23/4/2021 - PDF - Francés -
Más información163,00 € -
NBN EN 10217-7:2021
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
23/4/2021 - PDF - Inglés -
Más información163,00 € -
NBN EN 10217-7:2021
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
23/4/2021 - PDF - Francés -
Más información163,00 €