21.040.30 : Roscas especiales
-
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10/4/2024 - PDF - Español - AENOR
Más información34,00 € -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10/4/2024 - PDF - Inglés - AENOR
Más información40,80 € -
DIN EN ISO 11363-1:2023-11
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018 + Amd 1:2023), German version EN ISO 11363-1:2018 + A1:2023
1/11/2023 - PDF - Alemán - DIN
Más información72,80 € -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
31/10/2023 - PDF - Español - AENOR
Más información63,00 € -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
31/10/2023 - PDF - Inglés - AENOR
Más información75,60 € -
BS EN ISO 11363-1:2018+A1:2023
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
23/8/2023 - PDF - Inglés - BSI
Más información180,00 € -
NF EN ISO 11363-1/A1, E29-674-1/A1 (08/2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : spécifications - Amendement 1
1/8/2023 - Papel - Francés - AFNOR
Más información25,67 € -
23/30464431 DC:2023
BS EN ISO 11363-1 AMD 1. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Part Specifications
27/1/2023 - PDF - Inglés - BSI
Más información24,00 € -
BS EN ISO 15245-1:2021 + Redline
Tracked Changes. Gas cylinders. Parallel threads for connection of valves to gas cylinders Specification
2/12/2021 - PDF - Inglés - BSI
Más información235,00 € -
DIN EN ISO 15245-1:2021-09
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021), German version EN ISO 15245-1:2021
1/9/2021 - PDF - Alemán - DIN
Más información72,80 € -
BS EN ISO 15245-1:2021
Gas cylinders. Parallel threads for connection of valves to gas cylinders Specification
21/6/2021 - PDF - Inglés - BSI
Más información180,00 € -
45,98 €
-
52,90 €
-
DIN 513-3:2020-12
Metric buttress threads - Part 3: Deviations and tolerances
1/12/2020 - PDF - Alemán - DIN
Más información79,72 € -
NF ISO 1501/A1, E03-500/A1 (05/2020)
ISO miniature screw threads - Amendment 1 : the figure for the tolerance zone of external thread
1/5/2020 - Papel - Francés - AFNOR
Más información25,50 € -
BS EN ISO 11363-2:2017 + Redline
Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
26/2/2020 - PDF - Inglés - BSI
Más información326,00 € -
250,00 €
-
PR NF EN ISO 2702, E25-650-1PR (05/2019)
Fixations - Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques et physiques
1/5/2019 - Papel - Inglés, Francés - AFNOR
Más información60,48 € -
UNE-EN ISO 11363-1:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
3/5/2018 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 11363-1:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
3/5/2018 - PDF - Inglés - AENOR
Más información72,00 € -
DIN EN ISO 11363-2:2018-03
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017), German version EN ISO 11363-2:2017
1/3/2018 - PDF - Inglés - DIN
Más información107,48 € -
DIN EN ISO 11363-2:2018-03
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017), German version EN ISO 11363-2:2017
1/3/2018 - PDF - Alemán - DIN
Más información85,79 € -
UNE-EN ISO 11363-2:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
21/2/2018 - PDF - Español - AENOR
Más información70,00 € -
UNE-EN ISO 11363-2:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
21/2/2018 - PDF - Inglés - AENOR
Más información84,00 € -
NF EN ISO 11363-1, E29-674-1 (02/2018)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1 : specifications
1/2/2018 - Papel - Francés - AFNOR
Más información58,62 € -
BS EN ISO 11363-2:2017
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
17/1/2018 - PDF - Inglés - BSI
Más información250,00 € -
NF EN ISO 11363-2, E29-674-2 (12/2017)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2 : inspection gauges
1/12/2017 - Papel - Francés - AFNOR
Más información73,23 € -
36,27 €
-
DIN 3852-21:2016-09
Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
1/9/2016 - PDF - Alemán - DIN
Más información59,63 € -
DIN ISO 6696:2016-07
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
1/7/2016 - PDF - Alemán - DIN
Más información59,63 € -
DIN ISO 8488:2016-07
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
1/7/2016 - PDF - Alemán - DIN
Más información59,63 € -
DIN ISO 6696:2016-07
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
1/7/2016 - PDF - Inglés - DIN
Más información74,58 € -
DIN ISO 8488:2016-07
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
1/7/2016 - PDF - Inglés - DIN
Más información74,58 € -
BS EN 10226-2:2005
Pipe threads where pressure tight joints are made on the Taper external and taper internal threads. Dimensions, tolerances designation
30/4/2016 - PDF - Inglés - BSI
Más información180,00 € -
BS EN 10226-3:2005
Pipes threads where pressure-tight joints are made on the Verification by means of limit gauges
30/4/2016 - PDF - Inglés - BSI
Más información293,00 € -
DIN 7500-2:2016-04
Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
1/4/2016 - PDF - Alemán - DIN
Más información32,34 € -
DIN 7500-2:2016-04
Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
1/4/2016 - PDF - Inglés - DIN
Más información40,56 € -
25,00 €
-
UNE-EN ISO 1179-1:2014
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
22/1/2014 - PDF - Español - AENOR
Más información57,00 € -
UNE-EN ISO 1179-1:2014
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
22/1/2014 - PDF - Inglés - AENOR
Más información68,40 € -
0,00 €
-
62,00 €
-
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
1/4/2011 - PDF - Alemán - DIN
Más información32,34 € -
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
1/4/2011 - PDF - Inglés - DIN
Más información40,56 € -
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
1/4/2011 - PDF - Alemán - DIN
Más información32,34 € -
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
1/4/2011 - PDF - Inglés - DIN
Más información40,56 € -
55,77 €
-
BS EN 10226-1:2004
Pipe threads where pressure tight joints are made on the Taper external and parallel internal threads. Dimensions, tolerances designation
31/10/2010 - PDF - Inglés - BSI
Más información180,00 € -
0,00 €
-
BS 919-1:2007
Screw gauge limits and tolerances Specification for gauges screw threads of unified form
30/9/2009 - PDF - Inglés - BSI
Más información348,00 € -
75,50 €
-
UNE-EN ISO 1179-3:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
13/5/2009 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 1179-3:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
13/5/2009 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 1179-4:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
13/5/2009 - PDF - Español - AENOR
Más información57,00 € -
UNE-EN ISO 1179-4:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
13/5/2009 - PDF - Inglés - AENOR
Más información68,40 € -
110,00 €
-
110,00 €
-
BS 93:2008 (R2013)
British Association (B.A.) screw threads. Requirements
30/9/2008 - PDF - Inglés - BSI
Más información250,00 € -
UNE-EN 60423:2008
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
23/4/2008 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN 60423:2008
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
23/4/2008 - PDF - Inglés - AENOR
Más información72,00 € -
ISO 7-1:1994/Cor 1:2007
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
2/8/2007 - Papel - Inglés - ISO
Más información0,00 € -
ISO 7-1:1994/Cor 1:2007
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
2/8/2007 - Papel - Francés - ISO
Más información0,00 € -
DIN EN 10226-3 Berichtigung 1:2006-10
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges, German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
1/10/2006 - PDF - Alemán - DIN
Más información0,00 € -
UNE-EN 10226-3:2005 (R2014)
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
21/12/2005 - PDF - Español - AENOR
Más información79,00 € -
UNE-EN 10226-3:2005 (R2014)
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
21/12/2005 - PDF - Inglés - AENOR
Más información94,80 € -
NF EN 10226-2, E03-004-2 (12/2005)
Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation
1/12/2005 - Papel - Francés - AFNOR
Más información75,50 € -
UNE-EN 10226-2:2005 (R2019)
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
16/11/2005 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN 10226-2:2005 (R2019)
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
16/11/2005 - PDF - Inglés - AENOR
Más información72,00 € -
DIN EN 10226-2:2005-11
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation, German version EN 10226-2:2005
1/11/2005 - PDF - Alemán - DIN
Más información65,89 € -
DIN EN 10226-2:2005-11
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
1/11/2005 - PDF - Inglés - DIN
Más información82,52 € -
NBN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
30/9/2005 - PDF - Francés - NBN
Más información89,00 € -
NBN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
30/9/2005 - PDF - Alemán - NBN
Más información89,00 € -
NBN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
30/9/2005 - PDF - Inglés - NBN
Más información89,00 € -
DIN 3858:2005-08
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
1/8/2005 - PDF - Alemán - DIN
Más información52,90 € -
DIN 3858:2005-08
Whitworth pipe threads for pipe couplings - Parallel internal threads and taper external threads - Dimensions
1/8/2005 - PDF - Inglés - DIN
Más información66,07 € -
NF EN 10226-3, E03-004-3 (07/2005)
Pipe threads where pressure tight joints are made on the threads - Part 3 : verification by means of limit gauges
1/7/2005 - Papel - Francés - AFNOR
Más información108,33 € -
DIN EN 10226-3:2005-05
Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges, German version EN 10226-3:2005
1/5/2005 - PDF - Alemán - DIN
Más información104,95 € -
DIN EN 10226-3:2005-05
Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges
1/5/2005 - PDF - Inglés - DIN
Más información131,40 € -
NBN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
1/4/2005 - PDF - Francés - NBN
Más información142,00 € -
NBN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
1/4/2005 - PDF - Alemán - NBN
Más información142,00 € -
NBN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
1/4/2005 - PDF - Inglés - NBN
Más información142,00 € -
UNE-EN 10226-1:2004 (R2019)
Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
17/12/2004 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN 10226-1:2004 (R2019)
Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
17/12/2004 - PDF - Inglés - AENOR
Más información72,00 € -
39,35 €
-
NF EN 10226-1, E03-004-1 (11/2004)
Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation
1/11/2004 - Papel - Francés - AFNOR
Más información60,50 € -
DIN EN 10226-1:2004-10
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation, German version EN 10226-1:2004
1/10/2004 - PDF - Alemán - DIN
Más información65,89 € -
DIN EN 10226-1:2004-10
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
1/10/2004 - PDF - Inglés - DIN
Más información82,52 € -
NBN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
31/8/2004 - PDF - Francés - NBN
Más información58,00 € -
NBN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
31/8/2004 - PDF - Alemán - NBN
Más información58,00 € -
NBN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
31/8/2004 - PDF - Inglés - NBN
Más información58,00 € -
NF EN ISO 228-2, E03-005-2 (11/2003)
Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges
1/11/2003 - Papel - Francés - AFNOR
Más información86,50 € -
UNE-EN ISO 228-1:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
26/9/2003 - PDF - Español - AENOR
Más información52,00 € -
UNE-EN ISO 228-1:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
26/9/2003 - PDF - Inglés - AENOR
Más información62,40 € -
UNE-EN ISO 228-2:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
26/9/2003 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 228-2:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
26/9/2003 - PDF - Inglés - AENOR
Más información81,60 € -
DIN 263-3:2003-06
Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges, Thread dimensions and permissible wear of thread gauge
1/6/2003 - PDF - Alemán - DIN
Más información39,35 € -
NF EN ISO 228-1, E03-005-1 (06/2003)
Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation
1/6/2003 - Papel - Francés - AFNOR
Más información75,50 € -
DIN EN ISO 228-1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000), German version EN ISO 228-1:2003
1/5/2003 - PDF - Alemán - DIN
Más información59,63 € -
DIN EN ISO 228-1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000), German version EN ISO 228-1:2003
1/5/2003 - PDF - Inglés - DIN
Más información74,58 € -
DIN EN ISO 228-2:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987), German version EN ISO 228-2:2003
1/5/2003 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 228-2:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987), German version EN ISO 228-2:2003
1/5/2003 - PDF - Inglés - DIN
Más información99,44 € -
DIN EN ISO 228-1 Beiblatt 1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation, Limits of size
1/5/2003 - PDF - Alemán - DIN
Más información32,34 € -
DIN EN ISO 228-1 Beiblatt 1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation, Limits of size
1/5/2003 - PDF - Inglés - DIN
Más información40,56 € -
NBN EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
31/3/2003 - PDF - Francés - NBN
Más información58,00 € -
NBN EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
31/3/2003 - PDF - Alemán - NBN
Más información58,00 € -
NBN EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
31/3/2003 - PDF - Inglés - NBN
Más información58,00 € -
NBN EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
31/3/2003 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
31/3/2003 - PDF - Alemán - NBN
Más información89,00 € -
NBN EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
31/3/2003 - PDF - Inglés - NBN
Más información89,00 € -
JIS B 1060:2003 (R2013)
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
20/3/2003 - PDF - Japonés - JSA
Más información32,50 € -
BS EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the Verification by means of limit gauges
26/2/2003 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the Dimensions, tolerances and designation
26/2/2003 - PDF - Inglés - BSI
Más información180,00 € -
DIN EN ISO 15245-2:2002-04
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001), German version EN ISO 15245-2:2001
1/4/2002 - PDF - Alemán - DIN
Más información52,90 € -
DIN EN ISO 15245-2:2002-04
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001), German version EN ISO 15245-2:2001
1/4/2002 - PDF - Inglés - DIN
Más información66,07 € -
BS EN ISO 15245-2:2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders Gauge inspection
11/3/2002 - PDF - Inglés - BSI
Más información180,00 € -
JIS B 1059:2001 (R2016)
Drilling screws with tapping screw thread - Mechanical and functional properties
20/12/2001 - PDF - Japonés - JSA
Más información32,50 € -
ISO 7-2:2000 (R2022)
Pipe threads where pressure-tight joints are made on the threads
Part 2: Verification by means of limit gauges
21/9/2000 - Papel - Francés - ISO
Más información174,00 € -
ISO 228-1:2000 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 1: Dimensions, tolerances and designation
21/9/2000 - Papel - Francés - ISO
Más información72,00 € -
ISO 228-1:2000 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 1: Dimensions, tolerances and designation
21/9/2000 - Papel - Inglés - ISO
Más información72,00 € -
ISO 7-2:2000 (R2022)
Pipe threads where pressure-tight joints are made on the threads
Part 2: Verification by means of limit gauges
21/9/2000 - Papel - Inglés - ISO
Más información174,00 € -
34,00 €
-
40,80 €
-
DIN 263-1:2000-03
Single- and double-start acme thread with clearance for rail vehicles - Part 1: Dimensions
1/3/2000 - PDF - Alemán - DIN
Más información32,34 € -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999), German version EN ISO 10666:1999
1/2/2000 - PDF - Alemán - DIN
Más información52,90 € -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999), German version EN ISO 10666:1999
1/2/2000 - PDF - Inglés - DIN
Más información66,07 € -
37,00 €
-
37,00 €
-
37,00 €
-
151,00 €
-
DIN EN ISO 1478:1999-12
Tapping screw thread (ISO 1478:1999), German version EN ISO 1478:1999
1/12/1999 - PDF - Alemán - DIN
Más información39,35 € -
DIN EN ISO 1478:1999-12
Tapping screw thread (ISO 1478:1999), German version EN ISO 1478:1999
1/12/1999 - PDF - Inglés - DIN
Más información49,16 € -
48,00 €
-
48,00 €
-
32,50 €
-
32,50 €
-
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers, thread sizes
1/4/1998 - PDF - Alemán - DIN
Más información39,35 € -
DIN 168-1:1998-04
Glass container knuckle thread finishes - Thread sizes
1/4/1998 - PDF - Inglés - DIN
Más información49,16 € -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
1/11/1997 - PDF - Alemán - DIN
Más información45,98 € -
DIN 405-1:1997-11
General-purpose knuckle threads - Profiles and nominal sizes
1/11/1997 - PDF - Inglés - DIN
Más información57,57 € -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
1/11/1997 - PDF - Alemán - DIN
Más información45,98 € -
57,57 €
-
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
1/11/1997 - PDF - Alemán - DIN
Más información65,89 € -
DIN 405-3:1997-11
General purpose knuckle threads - Gauges for external and internal threads - Types, profiles and tolerances
1/11/1997 - PDF - Inglés - DIN
Más información82,52 € -
99,00 €
-
32,50 €
-
ISO 7-1:1994 (R2020)
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
12/5/1994 - Papel - Francés - ISO
Más información72,00 € -
ISO 7-1:1994 (R2020)
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
12/5/1994 - Papel - Inglés - ISO
Más información72,00 € -
DIN 6341-2:1993-10
Draw-in collets, thread of the collets, nominal size, limit deviations
1/10/1993 - PDF - Alemán - DIN
Más información45,98 € -
NF F00-016 (06/1992)
General railway equipment. Round screw threads. Sizes and tolerances. - Matériel ferroviaire en général
1/6/1992 - Papel - Francés - AFNOR
Más información48,00 € -
NF F00-017 (06/1992) (R2012)
General railway equipment. Round screw threads. Verification. - Matériel ferroviaire en général
1/6/1992 - Papel - Francés - AFNOR
Más información75,67 € -
NF F00-032 (06/1992) (R2012)
General railway equipment. Round screw threads. Profile. - Matériel ferroviaire en général
1/6/1992 - Papel - Francés - AFNOR
Más información34,67 € -
DIN 2781:1990-09
Machine tools; buttress thread 45°, single start, for hydraulic presses
1/9/1990 - PDF - Alemán - DIN
Más información32,34 € -
DIN 20314:1990-06
Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
1/6/1990 - PDF - Alemán - DIN
Más información32,34 € -
25,00 €
-
DIN 55525:1988-11
Preferred threads, for plastic and glass containers with unified screw cap, buttress thread, dimensions
1/11/1988 - PDF - Alemán - DIN
Más información39,35 € -
77,00 €
-
35,00 €
-
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
20/8/1987 - Papel - Francés - ISO
Más información110,00 € -
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
20/8/1987 - Papel - Inglés - ISO
Más información110,00 € -
UNE 68054:1986 (R2021)
EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTION THREADING
15/11/1986 - PDF - Español - AENOR
Más información14,00 € -
25,00 €
-
BS 4185-10:1977
Machine tool components. Trapezoidal threads for lead and feed screw assemblies
31/3/1977 - PDF - Inglés - BSI
Más información151,00 € -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - Alemán - DIN
Más información32,34 € -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - Inglés - DIN
Más información40,56 € -
DIN 5606-2:1975-03
Gauging of threads on workpieces for railway vehicles, round thread, acme thread, rounded acme thread
1/3/1975 - PDF - Alemán - DIN
Más información22,99 € -
22,99 €
-
28,60 €
-
22,99 €
-
28,60 €
-
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
1/5/1973 - PDF - Alemán - DIN
Más información22,99 € -
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
1/5/1973 - PDF - Inglés - DIN
Más información28,60 € -
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
1/5/1973 - PDF - Alemán - DIN
Más información22,99 € -
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
1/5/1973 - PDF - Inglés - DIN
Más información28,60 € -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
1/5/1973 - PDF - Alemán - DIN
Más información22,99 € -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
1/5/1973 - PDF - Inglés - DIN
Más información28,60 € -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
1/5/1973 - PDF - Alemán - DIN
Más información22,99 € -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
1/5/1973 - PDF - Inglés - DIN
Más información28,60 € -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
1/5/1973 - PDF - Alemán - DIN
Más información22,99 € -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
1/5/1973 - PDF - Inglés - DIN
Más información28,60 € -
42,00 €
-
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
1/11/1972 - PDF - Alemán - DIN
Más información22,99 € -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
1/11/1972 - PDF - Inglés - DIN
Más información28,60 € -
22,99 €
-
28,60 €
-
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
1/11/1970 - PDF - Alemán - DIN
Más información22,99 € -
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
1/11/1970 - PDF - Inglés - DIN
Más información28,60 € -
22,99 €
-
28,60 €
-
NF L40-102 (05/1966) (R2011)
Aircraft fluid installations. Connectors, axial sealing, male thread fittings. Sim thread (rech.)
1/5/1966 - Papel - Francés - AFNOR
Más información25,67 € -
NF L22-040 (12/1956) (R2011)
Aircraft fasteners. Manufacturing tolerances (rech.).
1/12/1956 - Papel - Francés - AFNOR
Más información25,67 € -
NF L05-210 (10/1956) (R2011)
Screw thread tolerances. Selection for aircraft industry (rech.).
1/10/1956 - Papel - Francés - AFNOR
Más información25,50 € -
25,50 €
-
25,50 €
-
NF L05-110 (03/1953) (R2008)
Screw threads. Selection for aircraft industry (rech.).
1/3/1953 - Papel - Francés - AFNOR
Más información25,50 € -
25,50 €
-
BS 811:1950
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
24/5/1950 - PDF - Inglés - BSI
Más información250,00 €