17.040.30 : Instrumentos de medición
-
UNE-EN ISO 3611:2024
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
10/4/2024 - PDF - Español - AENOR
Más información70,00 € -
UNE-EN ISO 3611:2024
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
10/4/2024 - PDF - Inglés - AENOR
Más información84,00 € -
BS EN 60061-3:1993+A60:2024
Lamp caps and holders together with gauges for the control of interchangeability safety Gauges
28/3/2024 - PDF - Inglés - BSI
Más información449,00 € -
DIN EN ISO 5059-1:2024-02
Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024), German and English version prEN ISO 5059-1:2024
1/2/2024 - PDF - Inglés, Alemán - DIN
Más información79,72 € -
PR NF EN ISO 5059-1, E11-098-1PR (02/2024)
Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel : micromètres d'intérieur - Partie 1 : Micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques
1/2/2024 - Papel - Inglés, Francés - AFNOR
Más información80,50 € -
24/30448290 DC:2024
BS ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers Part 1: Two-point micrometers. Design and metrological characteristics
2/1/2024 - PDF - Inglés - BSI
Más información24,00 € -
DIN EN ISO 9013/A1:2024-01
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/DAM 1:2023), German and English version EN ISO 9013:2017/prA1:2023
1/1/2024 - PDF - Inglés, Alemán - DIN
Más información32,34 € -
DIN EN ISO 10360-10:2023-11
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021), German version EN ISO 10360-10:2021
1/11/2023 - PDF - Alemán - DIN
Más información136,82 € -
DIN EN ISO 10360-13:2023-11
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021), German version EN ISO 10360-13:2021
1/11/2023 - PDF - Alemán - DIN
Más información152,71 € -
PR NF EN ISO 25178-602, E05-031-602PR (11/2023)
Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 602 : Conception et caractéristiques des instruments sans contact (à capteur confocal chromatique)
1/11/2023 - Papel - Inglés, Francés - AFNOR
Más información88,50 € -
PR NF EN ISO 25178-601, E05-031-601PR (11/2023)
Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 601 : Conception et caractéristiques des instruments à contact (à stylet)
1/11/2023 - Papel - Inglés, Francés - AFNOR
Más información88,50 € -
DIN EN ISO 5463:2023-09
Geometrical product specifications (GPS) - Form measuring equipment, Rotary axis form measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023), German and English version prEN ISO 5463:2023
1/9/2023 - PDF - Inglés, Alemán - DIN
Más información141,96 € -
DIN EN ISO 3611:2023-09
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023), German and English version EN ISO 3611:2023
1/9/2023 - PDF - Inglés, Alemán - DIN
Más información85,79 € -
PR NF EN ISO 5463, E11-108PR (09/2023)
Spécification géométrique des produits (GPS) - Équipements de mesure de forme , Instruments de mesure de forme à plateau tournant - Caractéristiques de conception et caractéristiques métrologiques
1/9/2023 - Papel - Inglés, Francés - AFNOR
Más información138,50 € -
NF E11-096 (08/2023)
Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des jauges de profondeur à coulisseau
1/8/2023 - Papel - Francés - AFNOR
Más información75,67 € -
NF E11-091 (08/2023)
Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des pieds à coulisse
1/8/2023 - Papel - Francés - AFNOR
Más información75,67 € -
23/30438188 DC:2023
BS EN ISO 5463. Geometrical product specifications (GPS). Form measuring equipment, Rotary axis form measuring instruments. Design and metrological characteristics
1/8/2023 - PDF - Inglés - BSI
Más información24,00 € -
UNE 82210:2023
Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
5/7/2023 - PDF - Español - AENOR
Más información71,00 € -
BS EN ISO 3611:2023 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
7/6/2023 - PDF - Inglés - BSI
Más información326,00 € -
BS EN ISO 3611:2023
Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
2/6/2023 - PDF - Inglés - BSI
Más información250,00 € -
NBN EN ISO 3611:2023
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur (ISO 3611:2023)
1/6/2023 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 3611:2023
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
1/6/2023 - PDF - Inglés - NBN
Más información89,00 € -
NF EN ISO 3611, E11-092 (05/2023)
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
1/5/2023 - Papel - Francés - AFNOR
Más información75,67 € -
DIN EN ISO 12179:2023-04
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021), German version EN ISO 12179:2022
1/4/2023 - PDF - Alemán - DIN
Más información92,62 € -
UNE-EN ISO 10360-10:2023
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
8/2/2023 - PDF - Español - AENOR
Más información100,00 € -
UNE-EN ISO 10360-10:2023
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
8/2/2023 - PDF - Inglés - AENOR
Más información120,00 € -
UNE-EN ISO 12179:2023
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
8/2/2023 - PDF - Español - AENOR
Más información74,00 € -
UNE-EN ISO 12179:2023
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
8/2/2023 - PDF - Inglés - AENOR
Más información88,80 € -
UNE-EN ISO 1:2022
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) (Endorsed by Asociación Española de Normalización in August of 2022.)
12/10/2022 - PDF - Inglés - AENOR
Más información42,00 € -
BS EN ISO 12179:2022 + Redline
Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
10/6/2022 - PDF - Inglés - BSI
Más información326,00 € -
BS EN ISO 12179:2022
Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
18/5/2022 - PDF - Inglés - BSI
Más información250,00 € -
UNE-EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021) (Endorsed by Asociación Española de Normalización in March of 2022.)
1/3/2022 - PDF - Inglés - AENOR
Más información100,00 € -
NBN EN ISO 12179:2022
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
22/1/2022 - PDF - Inglés - NBN
Más información121,00 € -
NBN EN ISO 12179:2022
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Kalibrierung von Tastschnittgeräten (ISO 12179:2021)
22/1/2022 - PDF - Alemán - NBN
Más información121,00 € -
VDI/VDE/DGQ 2618 Blatt 17.2:2022-01
Inspection of measuring and test equipment - Test instruction for length setting instruments
1/1/2022 - PDF - Inglés, Alemán - VDI
Más información89,84 € -
NF EN ISO 12179, E05-056 (01/2022)
Geometrical product specifications (GPS) - Surface texture : Profile method - Calibration of contact (stylus) instruments
1/1/2022 - Papel - Francés - AFNOR
Más información75,67 € -
BS EN ISO 10360-10:2021 + Redline
Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers
23/12/2021 - PDF - Inglés - BSI
Más información454,00 € -
ISO 12179:2021
Geometrical product specifications (GPS)
Surface texture: Profile method
20/12/2021 - Papel - Inglés - ISO
Más información148,00 € -
VDI/VDE 2617 Blatt 6.1:2021-11
Accuracy of coordinate measuring machines - Characteristics and their testing - Code of practice to the application of DIN EN ISO 10360-7 for coordinate measuring machines equipped with image processing systems
1/11/2021 - PDF - Inglés, Alemán - VDI
Más información125,94 € -
NF E11-099 (11/2021)
Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
1/11/2021 - Papel - Francés - AFNOR
Más información75,67 € -
BS EN ISO 10360-13:2021
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Optical 3D CMS
28/9/2021 - PDF - Inglés - BSI
Más información348,00 € -
NBN EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
24/9/2021 - PDF - Francés - NBN
Más información184,00 € -
NBN EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
24/9/2021 - PDF - Inglés - NBN
Más información184,00 € -
NBN EN ISO 10360-13:2021
Geometrische Produktspezifikationen (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmesssysteme (KMS) - Teil 13: Optische 3D KMS (ISO 10360-13:2021)
24/9/2021 - PDF - Alemán - NBN
Más información184,00 € -
NBN EN ISO 10360-10:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
18/9/2021 - PDF - Francés - NBN
Más información163,00 € -
NBN EN ISO 10360-10:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
18/9/2021 - PDF - Inglés - NBN
Más información163,00 € -
NBN EN ISO 10360-10:2021
Geometrische Produktspezifikationen (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmesssysteme (KMS) - Teil 10: Lasertracker (ISO 10360 10:2021)
18/9/2021 - PDF - Alemán - NBN
Más información163,00 € -
BS EN ISO 10360-10:2021
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers
17/9/2021 - PDF - Inglés - BSI
Más información348,00 € -
VDI/VDE/DGQ/DKD 2618 Blatt 5.1:2021-09
Inspection of measuring and test equipment - Test instruction for straight edges
1/9/2021 - PDF - Inglés, Alemán - VDI
Más información72,31 € -
NF EN ISO 10360-13, E11-150-13 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13 : Optical 3D CMS
1/9/2021 - Papel - Francés - AFNOR
Más información130,67 € -
NF EN ISO 10360-10, E11-150-10 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 : laser trackers for measuring point-to-point distances
1/9/2021 - Papel - Francés - AFNOR
Más información119,00 € -
VDI/VDE/DGQ 2618 Blatt 11.1:2021-08
Inspection of measuring and test equipment - Test instruction for mechanical dial gauges
1/8/2021 - PDF - Inglés, Alemán - VDI
Más información110,16 € -
VDI/VDE/DGQ/DKD 2618 Blatt 1.1:2021-07
Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principles
1/7/2021 - PDF - Inglés, Alemán - VDI
Más información121,61 € -
DIN 32877-2:2021-07
Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
1/7/2021 - PDF - Alemán - DIN
Más información104,95 € -
UNE-EN ISO 25178-72:2020/A1:2021
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
16/6/2021 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 25178-72:2020/A1:2021
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
16/6/2021 - PDF - Inglés - AENOR
Más información72,00 € -
VDI/VDE/DGQ/DKD 2618 Blatt 10.8:2021-06
Inspection of measuring and test equipment - Test instructions for internal micrometers with three-line-contact
1/6/2021 - PDF - Alemán - VDI
Más información72,31 € -
ASTM A1030/A1030M-21
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
1/5/2021 - PDF - Inglés - ASTM
Más información51,00 € -
ASTM A1030/A1030M-21 + Redline
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
1/5/2021 - PDF - Inglés - ASTM
Más información61,00 € -
ASTM D7759/D7759M-21
Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
1/5/2021 - PDF - Inglés - ASTM
Más información57,00 € -
ASTM D7759/D7759M-21 + Redline
Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
1/5/2021 - PDF - Inglés - ASTM
Más información68,00 € -
21/30378338 DC:2021
BS ENISO 10360-11. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Part 11. CMSs using the principle of X-ray computed tomography (CT)
8/4/2021 - PDF - Inglés - BSI
Más información24,00 € -
VDI/VDE/DGQ/DKD 2618 Blatt 11.4 Berichtigung:2021-04
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges, Corrigendum concerning standard VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08
1/4/2021 - PDF - Inglés, Alemán - VDI
Más información0,00 € -
UNE-EN ISO 5458:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
17/2/2021 - PDF - Español - AENOR
Más información96,00 € -
UNE-EN ISO 5458:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
17/2/2021 - PDF - Inglés - AENOR
Más información115,20 € -
VDI/VDE 2617 Blatt 6.2:2021-02
Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360-8 to coordinate measuring machines with optical distance sensors
1/2/2021 - PDF - Inglés, Alemán - VDI
Más información132,13 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27/1/2021 - PDF - Español - AENOR
Más información98,00 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27/1/2021 - PDF - Inglés - AENOR
Más información117,60 € -
ASTM D7299-20
Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
1/11/2020 - PDF - Inglés - ASTM
Más información51,00 € -
ASTM D7299-20 + Redline
Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
1/11/2020 - PDF - Inglés - ASTM
Más información61,00 € -
VDI/VDE 2617 Blatt 12.2:2020-10
Accuracy of coordinate measuring machines - Characteristics and their testing - Acceptance and reverification tests for optical CMM measuring microgeometries according to DIN EN ISO 10360-8 and VDI/VDE 2617 Part 6.2
1/10/2020 - PDF - Alemán - VDI
Más información89,84 € -
ASTM E1685-20
Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
1/10/2020 - PDF - Inglés - ASTM
Más información51,00 € -
ASTM E1685-20 + Redline
Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
1/10/2020 - PDF - Inglés - ASTM
Más información61,00 € -
VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges
1/8/2020 - PDF - Inglés, Alemán - VDI
Más información89,84 € -
UNE-EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
1/8/2020 - PDF - Inglés - AENOR
Más información68,00 € -
UNE-EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
1/7/2020 - PDF - Inglés - AENOR
Más información94,00 € -
NBN EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
25/6/2020 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
25/6/2020 - PDF - Alemán - NBN
Más información89,00 € -
NBN EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
25/6/2020 - PDF - Inglés - NBN
Más información89,00 € -
BS EN ISO 13385-2:2020 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
3/6/2020 - PDF - Inglés - BSI
Más información235,00 € -
BS EN ISO 13385-2:2020
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
1/6/2020 - PDF - Inglés - BSI
Más información180,00 € -
NBN EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
27/5/2020 - PDF - Francés - NBN
Más información163,00 € -
NBN EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
27/5/2020 - PDF - Alemán - NBN
Más información163,00 € -
NBN EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
27/5/2020 - PDF - Inglés - NBN
Más información163,00 € -
NF EN ISO 13385-2, E11-085-2 (05/2020)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : Jauges de profondeur , caractéristiques de conception et caractéristiques métrologiques
1/5/2020 - Papel - Francés - AFNOR
Más información75,67 € -
UNE-EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información65,00 € -
UNE-EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información69,00 € -
BS EN ISO 10360-5:2020
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
21/4/2020 - PDF - Inglés - BSI
Más información348,00 € -
NF EN ISO 10360-5, E11-150-5 (04/2020)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnelles (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisant un mode de mesurage par point discret et/ou par scan
1/4/2020 - Papel - Francés - AFNOR
Más información119,00 € -
DIN 32877-1:2020-04
Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
1/4/2020 - PDF - Alemán - DIN
Más información79,72 € -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
4/3/2020 - PDF - Español - AENOR
Más información74,00 € -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
4/3/2020 - PDF - Inglés - AENOR
Más información88,80 € -
DIN EN ISO 13385-1:2020-03
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019), German version EN ISO 13385-1:2019
1/3/2020 - PDF - Alemán - DIN
Más información85,79 € -
BS EN ISO 3040:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
26/2/2020 - PDF - Inglés - BSI
Más información382,00 € -
VDI/VDE-MT 2636:2020-01
Certification of courses and examinations in strain gauge measurement technology
1/1/2020 - PDF - Inglés, Alemán - VDI
Más información62,04 € -
NF E11-015 (12/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
1/12/2019 - Papel - Francés - AFNOR
Más información48,00 € -
BS EN ISO 14978:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
27/11/2019 - PDF - Inglés - BSI
Más información454,00 € -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
23/10/2019 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
23/10/2019 - PDF - Alemán - NBN
Más información89,00 € -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
23/10/2019 - PDF - Inglés - NBN
Más información89,00 € -
BS EN ISO 13385-1:2019
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
24/9/2019 - PDF - Inglés - BSI
Más información250,00 € -
NF EN ISO 13385-1, E11-085-1 (09/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : Pieds à coulisse, caractéristiques de conception et caractéristiques métrologiques
1/9/2019 - Papel - Francés - AFNOR
Más información75,50 € -
19/30400877 DC:2019
BS EN IEC 60061-3 AMD58. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
7/8/2019 - PDF - Inglés - BSI
Más información24,00 € -
DIN EN ISO 14978:2019-06
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018), German version EN ISO 14978:2018
1/6/2019 - PDF - Alemán - DIN
Más información126,26 € -
FD ISO/TR 230-11, E60-100-11 (06/2019)
Test code for machine tools - Part 11 : measuring instruments suitable for machine tool geometry tests
1/6/2019 - Papel - Francés - AFNOR
Más información192,00 € -
NF E11-098-1 (04/2019)
Geometrical Product Specifications (GPS) - Dimensional measuring equipments - Part 1 : internal micrometer with tow spindles - Metrological and design characteristics - Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel - Partie 1 : micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques
1/4/2019 - Papel - Francés - AFNOR
Más información60,67 € -
NF E11-098-2 (04/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
1/4/2019 - Papel - Francés - AFNOR
Más información48,00 € -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
27/3/2019 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
27/3/2019 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
27/3/2019 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
27/3/2019 - PDF - Inglés - AENOR
Más información81,60 € -
BS EN ISO 14978:2018
Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
21/3/2019 - PDF - Inglés - BSI
Más información348,00 € -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
30/1/2019 - PDF - Francés - NBN
Más información163,00 € -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
30/1/2019 - PDF - Alemán - NBN
Más información163,00 € -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
30/1/2019 - PDF - Inglés - NBN
Más información163,00 € -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
5/12/2018 - PDF - Español - AENOR
Más información71,00 € -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
5/12/2018 - PDF - Inglés - AENOR
Más información85,20 € -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
5/12/2018 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
5/12/2018 - PDF - Inglés - AENOR
Más información81,60 € -
NF EN ISO 14978, E11-001 (12/2018)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
1/12/2018 - Papel - Francés - AFNOR
Más información119,00 € -
ISO 14978:2018 (R2024)
Geometrical product specifications (GPS)
General concepts and requirements for GPS measuring equipment
28/11/2018 - Papel - Francés - ISO
Más información199,00 € -
VDI/VDE 2617 Blatt 8:2018-10
Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines
1/10/2018 - PDF - Inglés, Alemán - VDI
Más información154,13 € -
VDI/VDE 2631 Blatt 3:2018-09
Measurement of form - Properties and selection of filters
1/9/2018 - PDF - Inglés, Alemán - VDI
Más información89,84 € -
VDI/VDE 2617 Blatt 2.2:2018-07
Accuracy of coordinate measuring machines - Characteristics and their testing - Form measurement with coordinate measuring machines
1/7/2018 - PDF - Inglés, Alemán - VDI
Más información99,25 € -
DIN EN ISO 14253-1:2018-07
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017), German version EN ISO 14253-1:2017
1/7/2018 - PDF - Alemán - DIN
Más información92,62 € -
18/30379226 DC:2018
BS EN IEC 60061-3 AMD57. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
22/6/2018 - PDF - Inglés - BSI
Más información24,00 € -
18/30376927 DC:2018
BS EN 60061-3 AMD56. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
3/5/2018 - PDF - Inglés - BSI
Más información24,00 € -
VDI/VDE 2635 Blatt 2:2018-03
Experimental structure analysis - Recommendation on the implementation of strain measurements at high temperatures
1/3/2018 - PDF - Alemán - VDI
Más información99,25 € -
UNE-EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
1/3/2018 - PDF - Inglés - AENOR
Más información60,00 € -
TS B 0034-2:2018
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 2: Mobile type fuel oil flow meters
20/2/2018 - PDF - Japonés - JSA
Más información50,18 € -
TS B 0034-1:2018
Fuel oil flow meters - Measuring instruments used in transfer or certification - Part 1: Fuel oil flow meters
20/2/2018 - PDF - Japonés - JSA
Más información91,91 € -
DIN EN ISO 10360-12:2018-02
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016), German version EN ISO 10360-12:2016
1/2/2018 - PDF - Alemán - DIN
Más información126,26 € -
DIN EN ISO 10360-12:2018-02
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016), German version EN ISO 10360-12:2016
1/2/2018 - PDF - Inglés - DIN
Más información157,66 € -
36,27 €
-
36,27 €
-
113,00 €
-
0,00 €
-
NF EN ISO 14253-1, E10-201-1 (12/2017)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications - Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : Règles de décision pour contrôler la conformité ou la non - conformité à la spécification
1/12/2017 - Papel - Francés - AFNOR
Más información86,50 € -
UNE-EN 14359:2017
Gas-loaded accumulators for fluid power applications
25/10/2017 - PDF - Español - AENOR
Más información133,00 € -
UNE-EN 14359:2017
Gas-loaded accumulators for fluid power applications
25/10/2017 - PDF - Inglés - AENOR
Más información159,60 € -
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
26/7/2017 - PDF - Español - AENOR
Más información82,00 € -
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
26/7/2017 - PDF - Inglés - AENOR
Más información98,40 € -
UNE-EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
1/7/2017 - PDF - Inglés - AENOR
Más información69,00 € -
DIN EN ISO 9013:2017-05
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017), German version EN ISO 9013:2017
1/5/2017 - PDF - Inglés - DIN
Más información124,21 € -
DIN EN ISO 1938-2:2017-05
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017), German version EN ISO 1938-2:2017
1/5/2017 - PDF - Inglés - DIN
Más información91,12 € -
DIN EN ISO 9013:2017-05
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017), German version EN ISO 9013:2017
1/5/2017 - PDF - Alemán - DIN
Más información99,35 € -
DIN EN ISO 1938-2:2017-05
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017), German version EN ISO 1938-2:2017
1/5/2017 - PDF - Alemán - DIN
Más información72,80 € -
UNE-EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
1/5/2017 - PDF - Inglés - AENOR
Más información78,00 € -
0,00 €
-
UNE-EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
1/4/2017 - PDF - Inglés - AENOR
Más información87,00 € -
NBN EN ISO 1938-2:2017
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
22/3/2017 - PDF - Francés - NBN
Más información58,00 € -
NBN EN ISO 1938-2:2017
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
22/3/2017 - PDF - Inglés - NBN
Más información58,00 € -
NBN EN ISO 1938-2:2017
Geometrische Produktspezifikation (GPS) - Längenprüftechnik - Teil 2: Prüflehren für Rachenlehren (ISO 1938-2:2017)
22/3/2017 - PDF - Alemán - NBN
Más información58,00 € -
De: 36,27 €
-
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
1/3/2017 - PDF - Español - AENOR
Más información71,00 € -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
1/3/2017 - PDF - Inglés - AENOR
Más información85,20 € -
BS EN ISO 1938-2:2017
Geometrical product specifications (GPS). Dimensional measuring equipment. Reference disk gauges
28/2/2017 - PDF - Inglés - BSI
Más información180,00 € -
UNE-EN ISO 10360-8:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
18/1/2017 - PDF - Español - AENOR
Más información107,00 € -
UNE-EN ISO 10360-8:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
18/1/2017 - PDF - Inglés - AENOR
Más información128,40 € -
UNE-EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
14/12/2016 - PDF - Español - AENOR
Más información74,00 € -
UNE-EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
14/12/2016 - PDF - Inglés - AENOR
Más información88,80 € -
NF EN ISO 10360-12, E11-150-12 (12/2016)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12 : articulated arm coordinate measurement machines (CMM) - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 12 : MMT à bras articulés
1/12/2016 - Papel - Francés - AFNOR
Más información108,00 € -
BS EN ISO 10360-12:2016
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Articulated arm coordinate measurement machines (CMM)
30/11/2016 - PDF - Inglés - BSI
Más información348,00 € -
NBN EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
23/11/2016 - PDF - Francés - NBN
Más información163,00 € -
NBN EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
23/11/2016 - PDF - Alemán - NBN
Más información163,00 € -
NBN EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
23/11/2016 - PDF - Inglés - NBN
Más información163,00 € -
VDI/VDE/DGQ 2618 Blatt 11.4:2016-11
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauge
1/11/2016 - PDF - Alemán - VDI
Más información68,50 € -
VDI/VDE/DGQ 2618 Blatt 4.5:2016-11
Inspection of measuring and test equipment - Test instruction for setting standards for thread micrometers
1/11/2016 - PDF - Alemán - VDI
Más información49,38 € -
ISO 10360-12:2016 (R2021)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring systems (CMS)
30/9/2016 - Papel - Francés - ISO
Más información199,00 € -
JIS B 7741:2016
Calibration of extensometer systems used in uniaxial testing
22/8/2016 - PDF - Japonés - JSA
Más información50,18 € -
36,27 €
-
124,00 €
-
107,75 €
-
VDI/VDE 2631 Blatt 6:2016-08
Form measurement - Determination of the straightness deviation of the linear guide
1/8/2016 - PDF - Inglés, Alemán - VDI
Más información49,38 € -
BS EN ISO 3040:2016
Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
31/5/2016 - PDF - Inglés - BSI
Más información293,00 € -
NBN EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
27/5/2016 - PDF - Francés - NBN
Más información121,00 € -
NBN EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
27/5/2016 - PDF - Alemán - NBN
Más información121,00 € -
NBN EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
27/5/2016 - PDF - Inglés - NBN
Más información121,00 € -
58,50 €
-
BS EN ISO 25178-1:2016
Geometrical product specifications (GPS). Surface texture: Areal. Indication of surface texture
30/4/2016 - PDF - Inglés - BSI
Más información293,00 € -
NF E11-057 (04/2016)
Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem
1/4/2016 - Papel - Francés - AFNOR
Más información60,67 € -
NF E11-056 (04/2016)
Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger
1/4/2016 - Papel - Francés - AFNOR
Más información48,00 € -
NBN EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
24/12/2015 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
24/12/2015 - PDF - Alemán - NBN
Más información89,00 € -
NBN EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
24/12/2015 - PDF - Inglés - NBN
Más información89,00 € -
NF E11-021 (12/2015)
Steel gauges - Plain plug gauges (horology series) - Diameters from 0,1 mm to 3 mm
1/12/2015 - Papel - Francés - AFNOR
Más información34,67 € -
NF EN ISO 1938-1, E02-200-1 (12/2015)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size - Spécification géométrique des produits (GPS)
1/12/2015 - Papel - Francés - AFNOR
Más información99,00 € -
BS EN ISO 16610-60:2015
Geometrical Product Specification (GPS). Filtration. Linear areal filters: Basic concepts
30/11/2015 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 463:2006
Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
31/10/2015 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 13225:2012
Geometrical product specifications (GPS). Dimensional measuring equipment, Height gauges. Design and metrological characteristics
31/10/2015 - PDF - Inglés - BSI
Más información293,00 € -
BS EN ISO 9493:2010
Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
31/10/2015 - PDF - Inglés - BSI
Más información250,00 € -
VDI/VDE 2635 Blatt 1:2015-07
Experimental structure analysis - Metallic bonded resistance strain gauges - Characteristics and testing conditions
1/7/2015 - PDF - Inglés, Alemán - VDI
Más información128,38 € -
36,27 €
-
VDI/VDE/DGQ 2618 Blatt 17.1 Berichtigung:2015-06
Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines, Corrigendum concerning standard VDI/VDE/DGQ 2618 Part 17.1:2014-12
1/6/2015 - PDF - Inglés, Alemán - VDI
Más información0,00 € -
BS 4311-1:2007
Gauge blocks manufactured to imperial specification Specification and validation
28/2/2015 - PDF - Inglés - BSI
Más información180,00 € -
50,18 €
-
VDI/VDE/DGQ 2618 Blatt 17.1:2014-12
Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines
1/12/2014 - PDF - Inglés, Alemán - VDI
Más información82,13 € -
NF E02-314 (12/2014)
Steel gauges - Plug gauges for 5 % tapers - Calibres en acier
1/12/2014 - Papel - Francés - AFNOR
Más información48,00 € -
NF E02-316 (12/2014)
Steel gauges - 5 % taper rings with tapped hole - Calibres en acier
1/12/2014 - Papel - Francés - AFNOR
Más información48,00 € -
NF E02-318 (12/2014)
Steel gauges - 7/24 taper plug gauges - Calibres en acier
1/12/2014 - Papel - Francés - AFNOR
Más información48,00 €