01.100.20 : Dibujo de ingeniería mecánica

Elementos 1 a 200 de un total de 354

En sentido ascendente
por página

Lista  Parrilla 

Página:
  1. 1
  2. 2
  • DIN 3966-1:2025-06

    Involute cylindrical gears - Part 1: Information on drawings to obtain the gear required
    1/6/2025 - PDF - Alemán - DIN
    Más información
    74,95 €

  • BS ISO 10110-6:2025

    Optics and photonics. Preparation of drawings for optical elements systems Centring tilt tolerances
    30/5/2025 - PDF - Inglés - BSI
    Más información
    312,00 €

  • ISO 10110-6:2025

    Optics and photonics — Preparation of drawings for optical elements and systems
    29/5/2025 - - - ISO
    Más información
    178,00 €

  • BS ISO 10110-11:2025 + Redline

    Tracked Changes. Optics and photonics. Preparation of drawings for optical elements systems Non-toleranced data
    11/4/2025 - PDF - Inglés - BSI
    Más información
    227,00 €

  • BS ISO 10110-11:2025

    Optics and photonics. Preparation of drawings for optical elements systems Non-toleranced data
    3/4/2025 - PDF - Inglés - BSI
    Más información
    162,00 €

  • NF ISO 10110-11, S10-008-11 (04/2025)

    Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 11 : données non tolérancées
    1/4/2025 - Papier - Francés - AFNOR
    Más información
    49,33 €

  • ISO 10110-11:2025

    Optics and photonics — Preparation of drawings for optical elements and systems
    28/3/2025 - - - ISO
    Más información
    49,00 €

  • NBN ISO 13444:2024

    Technical product documentation (TPD) — Dimensioning and indication of knurling
    8/12/2024 - - - NBN
    Más información
    58,00 €

  • DIN ISO 10110-16:2024-12

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 16: Diffractive surfaces (ISO 10110-16:2023)
    1/12/2024 - PDF - Alemán - DIN
    Más información
    108,13 €

  • BS EN ISO 5459:2024 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    22/10/2024 - PDF - Inglés - BSI
    Más información
    559,00 €

  • BS EN ISO 5459:2024

    Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    16/10/2024 - PDF - Inglés - BSI
    Más información
    399,00 €

  • ISO 5459:2024

    Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
    4/10/2024 - - - ISO
    Más información
    254,00 €

  • NF EN ISO 5459, E04-554 (10/2024)

    Spécification géométrique des produits (GPS) - Tolérancement géométrique - Références spécifiées et systèmes de références spécifiées
    1/10/2024 - Papier - Francés - AFNOR
    Más información
    191,00 €

  • DIN EN ISO 5459:2024-06

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO/FDIS 5459:2024), German and English version prEN ISO 5459:2024
    1/6/2024 - PDF - Inglés, Alemán - DIN
    Más información
    241,03 €

  • 33,08 €

  • PR NF ISO 10110-6, S10-008-6PR (03/2024)

    Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 6 : tolérances de centrage et d'inclinaison
    1/3/2024 - Papier - Inglés, Francés - AFNOR
    Más información
    111,00 €

  • 24/30453598 DC:2024

    BS ISO 10110-11 Optics and photonics. Preparation of drawings for optical elements systems Non-toleranced data
    25/1/2024 - PDF - Inglés - BSI
    Más información
    24,00 €

  • 24/30447806 DC:2024

    BS ISO 10110-6 Optics and photonics - Preparation of drawings for optical elements systems Part 6: Centring tilt tolerances
    11/1/2024 - PDF - Inglés - BSI
    Más información
    24,00 €

  • NBN ISO 10110-16:2023

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
    17/10/2023 - PDF - Francés - NBN
    Más información
    142,00 €

  • NBN ISO 10110-16:2023

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
    17/10/2023 - PDF - Inglés - NBN
    Más información
    142,00 €

  • BS ISO 10110-16:2023

    Optics and photonics. Preparation of drawings for optical elements systems Diffractive surfaces
    12/7/2023 - PDF - Inglés - BSI
    Más información
    312,00 €

  • ISO 10110-16:2023

    Optics and photonics — Preparation of drawings for optical elements and systems
    10/7/2023 - - - ISO
    Más información
    178,00 €

  • NF ISO 10110-16, S10-008-16 (07/2023)

    Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 16 : surfaces diffractives
    1/7/2023 - Papier - Francés - AFNOR
    Más información
    102,33 €

  • UNE-EN ISO 21920-3:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
    7/6/2023 - - - AENOR
    Más información
    De: 88,00 €

  • UNE-EN ISO 21920-1:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
    7/6/2023 - - - AENOR
    Más información
    De: 114,00 €

  • UNE-EN ISO 2692:2023

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
    8/2/2023 - - - AENOR
    Más información
    De: 115,00 €

  • BS EN ISO 2692:2021 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    4/1/2023 - PDF - Inglés - BSI
    Más información
    520,00 €

  • DIN 509:2022-12

    Technical product documentation - Relief grooves - Types, dimensions and tolerances
    1/12/2022 - PDF - Alemán - DIN
    Más información
    61,40 €

  • VG 95001-8:2022-11

    Drawing set - Part 8: Code letters for type of documents, Text in German and English
    1/11/2022 - PDF - Inglés, Alemán - DIN
    Más información
    61,40 €

  • 22/30449684 DC:2022

    BS EN ISO 5459:2011 AMD1. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    27/10/2022 - PDF - Inglés - BSI
    Más información
    24,00 €

  • DIN EN ISO 2692:2022-08

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021), German version EN ISO 2692:2021
    1/8/2022 - PDF - Alemán - DIN
    Más información
    162,80 €

  • DIN SPEC 91411:2022-08

    Requirements for the technical representation of magnetic measurement scales in design drawings
    1/8/2022 - PDF - Alemán - DIN
    Más información
    0,00 €

  • BS EN ISO 2553:2019

    Welding and allied processes. Symbolic representation on drawings. Welded joints
    20/7/2022 - PDF - Inglés - BSI
    Más información
    370,00 €

  • DIN EN ISO 7083:2022-07

    Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021), German version EN ISO 7083:2021
    1/7/2022 - PDF - Alemán - DIN
    Más información
    208,04 €

  • DIN EN ISO 2553:2022-07

    Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09), German version EN ISO 2553:2019
    1/7/2022 - PDF - Alemán - DIN
    Más información
    146,26 €

  • 33,08 €

  • 22/30430316 DC:2022

    BS ISO 10110-16. Optics and photonics. Preparation of drawings for optical elements systems Part 16. Diffractive surfaces
    30/5/2022 - PDF - Inglés - BSI
    Más información
    24,00 €

  • ASME Y14.8-2022

    Castings, Forgings, and Molded Parts
    1/1/2022 - PDF DRM - Inglés - ASME
    Más información
    89,00 €

  • DIN EN ISO 6410-3:2021-12

    Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021), German version EN ISO 6410-3:2021
    1/12/2021 - PDF - Alemán - DIN
    Más información
    61,40 €

  • DIN ISO 10110-12:2021-09

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces (ISO 10110-12:2019)
    1/9/2021 - PDF - Alemán - DIN
    Más información
    95,42 €

  • BS EN ISO 2692:2021 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    2/7/2021 - PDF - Inglés - BSI
    Más información
    520,00 €

  • BS EN ISO 2692:2021 ExComm - SET

    Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    2/7/2021 - PDF - Inglés - BSI
    Más información
    102,00 €

  • DIN ISO 10110-8:2021-07

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture (ISO 10110-8:2019)
    1/7/2021 - PDF - Alemán - DIN
    Más información
    95,42 €

  • UNE-EN ISO 7083:2021

    Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021) (Endorsed by Asociación Española de Normalización in July of 2021.)
    1/7/2021 - PDF - Inglés - AENOR
    Más información
    140,00 €

  • BS EN ISO 2692:2021 ExComm

    Expert Commentary for BS EN ISO 2692:2021. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    30/6/2021 - PDF - Inglés - BSI
    Más información
    102,00 €

  • BS EN ISO 2692:2021

    Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    29/6/2021 - PDF - Inglés - BSI
    Más información
    370,00 €

  • NBN EN ISO 2692:2021

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
    28/6/2021 - - - NBN
    Más información
    184,00 €

  • BS EN ISO 6410-3:2021 + Redline

    Tracked Changes. Technical drawings. Screw threads and threaded parts Simplified representation
    14/6/2021 - PDF - Inglés - BSI
    Más información
    227,00 €

  • ISO 2692:2021

    Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    10/6/2021 - - - ISO
    Más información
    229,00 €

  • BS EN ISO 7083:2021 + Redline

    Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions
    9/6/2021 - PDF - Inglés - BSI
    Más información
    559,00 €

  • BS EN ISO 7083:2021

    Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions
    1/6/2021 - PDF - Inglés - BSI
    Más información
    399,00 €

  • NF EN ISO 2692, E04-555 (06/2021)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    1/6/2021 - Papier - Francés - AFNOR
    Más información
    134,50 €

  • NBN ISO 10110-11:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
    29/5/2021 - - - NBN
    Más información
    37,00 €

  • NBN ISO 10110-12:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
    29/5/2021 - - - NBN
    Más información
    121,00 €

  • NBN ISO 10110-8:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture
    29/5/2021 - - - NBN
    Más información
    121,00 €

  • NBN ISO 10110-9:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
    29/5/2021 - - - NBN
    Más información
    58,00 €

  • NBN ISO 10110-1:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
    29/5/2021 - - - NBN
    Más información
    163,00 €

  • NBN ISO 10110-18:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
    29/5/2021 - - - NBN
    Más información
    121,00 €

  • NBN ISO 10110-7:2021

    Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
    29/5/2021 - - - NBN
    Más información
    58,00 €

  • NBN EN ISO 7083:2021

    Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)
    28/5/2021 - - - NBN
    Más información
    205,00 €

  • ISO 7083:2021

    Technical product documentation — Symbols used in technical product documentation — Proportions and dimensions
    14/5/2021 - - - ISO
    Más información
    254,00 €

  • UNE-EN ISO 6410-3:2021

    Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021) (Endorsed by Asociación Española de Normalización in May of 2021.)
    1/5/2021 - PDF - Inglés - AENOR
    Más información
    62,00 €

  • BS EN ISO 6410-3:2021

    Technical drawings. Screw threads and threaded parts Simplified representation
    13/4/2021 - PDF - Inglés - BSI
    Más información
    162,00 €

  • NBN EN ISO 6410-3:2021

    Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021)
    9/4/2021 - - - NBN
    Más información
    37,00 €

  • NF EN ISO 6410-3, E04-012-3 (04/2021)

    Technical drawings - Screw threads and threaded parts - Part 3 : simplified representation
    1/4/2021 - Papier - Francés - AFNOR
    Más información
    35,67 €

  • ISO 6410-3:2021

    Technical drawings — Screw threads and threaded parts
    22/3/2021 - - - ISO
    Más información
    49,00 €

  • UNE-EN ISO 5458:2021

    Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
    17/2/2021 - - - AENOR
    Más información
    De: 101,00 €

  • ASME Y14.24-2020

    Types and Applications of Engineering Drawings
    27/10/2020 - - - ASME
    Más información
    204,00 €

  • DIN ISO 10110-1:2020-09

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 1: General (ISO 10110-1:2019)
    1/9/2020 - PDF - Alemán - DIN
    Más información
    130,09 €

  • NF ISO 10110-8, S10-008-8 (05/2020)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 8 : surface texture - Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 8 : État de surface
    1/5/2020 - Papier - Francés - AFNOR
    Más información
    89,33 €

  • NF ISO 10110-12, S10-008-12 (05/2020)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 12 : aspheric surfaces
    1/5/2020 - Papier - Francés - AFNOR
    Más información
    89,33 €

  • UNE-EN ISO 2553:2020

    Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09)
    15/4/2020 - - - AENOR
    Más información
    De: 116,00 €

  • NF ISO 10110-1, S10-008-1 (04/2020)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 1 : general
    1/4/2020 - Papier - Francés - AFNOR
    Más información
    122,67 €

  • BS EN ISO 6412-3:2018 + Redline

    Tracked Changes. Technical product documentation. Simplified representation of pipelines Terminal features ventilation and drainage systems
    26/2/2020 - PDF - Inglés - BSI
    Más información
    227,00 €

  • BS ISO 10110-9:2016 + Redline

    Tracked Changes. Optics and photonics. Preparation of drawings for optical elements systems Surface treatment coating
    26/2/2020 - PDF - Inglés - BSI
    Más información
    269,00 €

  • BS EN ISO 6412-1:2018 + Redline

    Tracked Changes. Technical product documentation. Simplified representation of pipelines General rules and orthogonal
    26/2/2020 - PDF - Inglés - BSI
    Más información
    269,00 €

  • BS EN ISO 6412-2:2018 + Redline

    Tracked Changes. Technical product documentation. Simplified representation of pipelines Isometric projection
    26/2/2020 - PDF - Inglés - BSI
    Más información
    269,00 €

  • BS ISO 10110-14:2018 + Redline

    Tracked Changes. Optics and photonics. Preparation of drawings for optical elements systems Wavefront deformation tolerance
    26/2/2020 - PDF - Inglés - BSI
    Más información
    269,00 €

  • BS ISO 10110-7:2017 + Redline

    Tracked Changes. Optics and photonics. Preparation of drawings for optical elements systems Surface imperfections
    25/2/2020 - PDF - Inglés - BSI
    Más información
    373,00 €

  • BS EN ISO 1660:2017 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
    24/2/2020 - PDF - Inglés - BSI
    Más información
    520,00 €

  • BS ISO 10110-5:2015 + Redline

    Tracked Changes. Optics and photonics. Preparation of drawings for optical elements systems Surface form tolerances
    24/2/2020 - PDF - Inglés - BSI
    Más información
    373,00 €

  • BS EN ISO 1101:2017 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
    24/2/2020 - PDF - Inglés - BSI
    Más información
    559,00 €

  • BS EN ISO 6413:2018 + Redline

    Tracked Changes. Technical product documentation. Representation of splines and serrations
    24/2/2020 - PDF - Inglés - BSI
    Más información
    269,00 €

  • DIN EN ISO 18388:2020-01

    Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016), German version EN ISO 18388:2019
    1/1/2020 - PDF - Alemán - DIN
    Más información
    67,85 €

  • BS ISO 10110-12:2019

    Optics and photonics. Preparation of drawings for optical elements systems Aspheric surfaces
    29/11/2019 - PDF - Inglés - BSI
    Más información
    312,00 €

  • NBN EN ISO 13715:2019

    Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
    28/11/2019 - - - NBN
    Más información
    121,00 €

  • ISO 10110-12:2019 (R2025)

    Optics and photonics — Preparation of drawings for optical elements and systems
    26/11/2019 - - - ISO
    Más información
    152,00 €

  • BS ISO 10110-8:2019

    Optics and photonics. Preparation of drawings for optical elements systems Surface texture
    22/11/2019 - PDF - Inglés - BSI
    Más información
    266,00 €

  • ISO 10110-8:2019 (R2025)

    Optics and photonics — Preparation of drawings for optical elements and systems
    15/11/2019 - - - ISO
    Más información
    152,00 €

  • UNE-EN ISO 18388:2019

    Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016) (Endorsed by Asociación Española de Normalización in November of 2019.)
    1/11/2019 - PDF - Inglés - AENOR
    Más información
    63,00 €

  • UNE-EN ISO 13715:2019

    Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017) (Endorsed by Asociación Española de Normalización in November of 2019.)
    1/11/2019 - PDF - Inglés - AENOR
    Más información
    74,00 €

  • BS EN ISO 13715:2019

    Technical product documentation. Edges of undefined shape. Indication and dimensioning
    29/10/2019 - PDF - Inglés - BSI
    Más información
    266,00 €

  • NBN EN ISO 18388:2019

    Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016)
    23/10/2019 - - - NBN
    Más información
    58,00 €

  • BS EN ISO 18388:2019

    Technical product documentation (TPD). Relief grooves. Types and dimensioning
    16/10/2019 - PDF - Inglés - BSI
    Más información
    191,00 €

  • BS ISO 10110-1:2019

    Optics and photonics. Preparation of drawings for optical elements systems General
    11/10/2019 - PDF - Inglés - BSI
    Más información
    370,00 €

  • ISO 10110-1:2019

    Optics and photonics — Preparation of drawings for optical elements and systems
    10/10/2019 - - - ISO
    Más información
    204,00 €

  • NF EN ISO 13715, E04-132 (10/2019)

    Technical product documentation - Edges of undefined shape - Indication and dimensioning
    1/10/2019 - Papier - Francés - AFNOR
    Más información
    89,00 €

  • NF EN ISO 18388, E04-567 (10/2019)

    Technical product documentation (TPD) - Relief grooves - Types and dimensioning
    1/10/2019 - Papier - Francés - AFNOR
    Más información
    60,50 €

  • DIN ISO 10110-18:2019-09

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae (ISO 10110-18:2018)
    1/9/2019 - PDF - Alemán - DIN
    Más información
    95,42 €

  • DIN ISO 10110-14:2019-09

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance (ISO 10110-14:2018)
    1/9/2019 - PDF - Alemán - DIN
    Más información
    74,95 €

  • NF ISO 10110-18, S10-008-18 (06/2019)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 18 : stress birefringence, bubbles and inclusions, homogeneity, and striae - Indications sur les dessins pour éléments et systèmes optiques - Partie 18 : Imperfections du matériau - Biréfringence sous contrainte, bulles et inclusions, et homogénéité et stries
    1/6/2019 - Papier - Francés - AFNOR
    Más información
    89,33 €

  • NBN EN ISO 2553:2019

    Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09)
    23/5/2019 - - - NBN
    Más información
    184,00 €

  • ISO 2553:2019

    Welding and allied processes — Symbolic representation on drawings — Welded joints
    18/3/2019 - - - ISO
    Más información
    229,00 €

  • BS ISO 10110-18:2018

    Optics and photonics. Preparation of drawings for optical elements systems Stress birefringence, bubbles inclusions, homogeneity, striae
    5/12/2018 - PDF - Inglés - BSI
    Más información
    266,00 €

  • ISO 10110-18:2018

    Optics and photonics — Preparation of drawings for optical elements and systems
    3/12/2018 - - - ISO
    Más información
    152,00 €

  • DIN EN ISO 6413:2018-12

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018), German version EN ISO 6413:2018
    1/12/2018 - PDF - Alemán - DIN
    Más información
    74,95 €

  • NF ISO 10110-14, S10-008-14 (12/2018)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 14 : wavefront deformation tolerance - Optique et photonique - Préparation des dessins pour éléments et systèmes optiques - Partie 14 : Tolérance de déformation du front d’onde
    1/12/2018 - Papier - Francés - AFNOR
    Más información
    78,00 €

  • UNE-EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018) (Endorsed by Asociación Española de Normalización in December of 2018.)
    1/12/2018 - PDF - Inglés - AENOR
    Más información
    66,00 €

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    27/11/2018 - - - NBN
    Más información
    58,00 €

  • BS EN ISO 6413:2018

    Technical product documentation. Representation of splines and serrations
    30/10/2018 - PDF - Inglés - BSI
    Más información
    191,00 €

  • BS ISO 10110-14:2018

    Optics and photonics. Preparation of drawings for optical elements systems Wavefront deformation tolerance
    26/10/2018 - PDF - Inglés - BSI
    Más información
    191,00 €

  • ISO 10110-14:2018 (R2023)

    Optics and photonics — Preparation of drawings for optical elements and systems
    25/10/2018 - - - ISO
    Más información
    75,00 €

  • DIN 1912-4:2018-10

    Graphical representation - Welding, soldering - Part 4: Concepts and terms for soldered and brazed joints and seams
    1/10/2018 - PDF - Alemán - DIN
    Más información
    54,49 €

  • NF EN ISO 6413, E04-119 (10/2018)

    Technical product documentation - Representation of splines and serrations - Dessins techniques - Représentation des cannelures et des dentelures
    1/10/2018 - Papier - Francés - AFNOR
    Más información
    62,33 €

  • ISO 6413:2018 (R2024)

    Technical product documentation — Representation of splines and serrations
    19/9/2018 - - - ISO
    Más información
    75,00 €

  • DIN ISO 15787:2018-08

    Technical product documentation - Heat-treated ferrous parts - Presentation and indications (ISO 15787:2016)
    1/8/2018 - PDF - Alemán - DIN
    Más información
    108,13 €

  • DIN ISO 10110-7:2018-05

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections (ISO 10110-7:2017)
    1/5/2018 - PDF - Inglés - DIN
    Más información
    93,83 €

  • DIN ISO 10110-7:2018-05

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections (ISO 10110-7:2017)
    1/5/2018 - PDF - Alemán - DIN
    Más información
    74,95 €

  • BS EN ISO 6412-2:2018

    Technical product documentation. Simplified representation of pipelines Isometric projection
    5/3/2018 - PDF - Inglés - BSI
    Más información
    191,00 €

  • UNE-EN ISO 6412-1:2018

    Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
    1/3/2018 - PDF - Inglés - AENOR
    Más información
    60,00 €

  • UNE-EN ISO 6412-2:2018

    Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
    1/3/2018 - PDF - Inglés - AENOR
    Más información
    62,00 €

  • UNE-EN ISO 6412-3:2018

    Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
    1/3/2018 - PDF - Inglés - AENOR
    Más información
    35,00 €

  • BS EN ISO 6412-3:2018

    Technical product documentation. Simplified representation of pipelines Terminal features ventilation and drainage systems
    21/2/2018 - PDF - Inglés - BSI
    Más información
    162,00 €

  • BS EN ISO 6412-1:2018

    Technical product documentation. Simplified representation of pipelines General rules and orthogonal
    20/2/2018 - PDF - Inglés - BSI
    Más información
    191,00 €

  • NF EN ISO 6412-1, E04-118-1 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 1 : general rules and orthogonal representation - Dessins techniques - Représentation simplifiée des tuyaux et lignes de tuyauteries - Partie 1 : Règles générales et représentation orthogonale
    1/2/2018 - Papier - Francés - AFNOR
    Más información
    58,62 €

  • NF EN ISO 6412-2, E04-118-2 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 2 : isometric projection - Dessins techniques - Représentation simplifiée des tuyaux et lignes de tuyauteries - Partie 2 : Projection isométrique
    1/2/2018 - Papier - Francés - AFNOR
    Más información
    73,23 €

  • NF EN ISO 6412-3, E04-118-3 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 3 : terminal features of ventilation and drainage systems - Dessins techniques - Représentation simplifiée des tuyaux et lignes de tuyauteries - Partie 3 : Accessoires pour les systèmes de ventilation et de drainage
    1/2/2018 - Papier - Francés - AFNOR
    Más información
    46,55 €

  • DIN 3966-3:2018-01

    Worms and worm wheel - Part 3: Information to be given to the manufacturer by the purchaser in order to obtain the gear required
    1/1/2018 - PDF - Alemán - DIN
    Más información
    67,85 €

  • NF ISO 10110-7, S10-008-7 (11/2017)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 7 : surface imperfections - Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 7 : Tolérances d'imperfection de surface
    1/11/2017 - Papier - Francés - AFNOR
    Más información
    62,00 €

  • BS ISO 10110-7:2017

    Optics and photonics. Preparation of drawings for optical elements systems Surface imperfections
    12/9/2017 - PDF - Inglés - BSI
    Más información
    266,00 €

  • ISO 10110-7:2017 (R2022)

    Optics and photonics — Preparation of drawings for optical elements and systems
    16/8/2017 - - - ISO
    Más información
    75,00 €

  • NF EN ISO 1101, E04-552 (04/2017)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
    1/4/2017 - Papier - Francés - AFNOR
    Más información
    204,00 €

  • NF EN ISO 1660, E04-556 (04/2017)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing - Spécification géométrique des produits (GPS)
    1/4/2017 - Papier - Francés - AFNOR
    Más información
    122,67 €

  • UNE-EN ISO 1101:2017

    Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
    1/4/2017 - PDF - Inglés - AENOR
    Más información
    168,00 €

  • ISO 13715:2017 (R2024)

    Technical product documentation — Edges of undefined shape — Indication and dimensioning
    17/3/2017 - - - ISO
    Más información
    152,00 €

  • BS EN ISO 1660:2017

    Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
    28/2/2017 - PDF - Inglés - BSI
    Más información
    370,00 €

  • BS EN ISO 1101:2017

    Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
    28/2/2017 - PDF - Inglés - BSI
    Más información
    399,00 €

  • ISO 1101:2017

    Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
    1/2/2017 - - - ISO
    Más información
    254,00 €

  • ISO 1660:2017 (R2022)

    Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
    1/2/2017 - - - ISO
    Más información
    204,00 €

  • UNE 1063:2016

    Identification of pipelines according to the fluid conveyed
    21/12/2016 - PDF - Español - AENOR
    Más información
    58,00 €

  • UNE-EN ISO 3040:2016

    Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
    14/12/2016 - - - AENOR
    Más información
    De: 77,00 €

  • DIN ISO 10110-9:2016-12

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:2016)
    1/12/2016 - PDF - Alemán - DIN
    Más información
    61,40 €

  • DIN ISO 10110-11:2016-12

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:2016)
    1/12/2016 - PDF - Alemán - DIN
    Más información
    47,38 €

  • DIN ISO 10110-9:2016-12

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:2016)
    1/12/2016 - PDF - Inglés - DIN
    Más información
    76,82 €

  • DIN ISO 10110-11:2016-12

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:2016)
    1/12/2016 - PDF - Inglés - DIN
    Más información
    59,35 €

  • BS ISO 15787:2016

    Technical product documentation. Heat-treated ferrous parts. Presentation and indications
    30/9/2016 - PDF - Inglés - BSI
    Más información
    312,00 €

  • DIN ISO 17533:2016-09

    Welding for aerospace applications - Welding information in design documents (ISO 17533:2015)
    1/9/2016 - PDF - Alemán - DIN
    Más información
    40,56 €

  • DIN ISO 17533:2016-09

    Welding for aerospace applications - Welding information in design documents (ISO 17533:2015)
    1/9/2016 - PDF - Inglés - DIN
    Más información
    50,65 €

  • NF ISO 10110-9, S10-008-9 (09/2016)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 9 : surface treatment and coating
    1/9/2016 - Papier - Francés - AFNOR
    Más información
    62,33 €

  • ISO 15787:2016 (R2024)

    Technical product documentation — Heat-treated ferrous parts — Presentation and indications
    26/8/2016 - - - ISO
    Más información
    178,00 €

  • BS ISO 10110-9:2016

    Optics and photonics. Preparation of drawings for optical elements and systems. Surface treatment and coating
    31/7/2016 - PDF - Inglés - BSI
    Más información
    191,00 €

  • ISO 10110-9:2016

    Optics and photonics — Preparation of drawings for optical elements and systems
    7/7/2016 - - - ISO
    Más información
    75,00 €

  • DIN ISO 10110-6:2016-06

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:2015)
    1/6/2016 - PDF - Alemán - DIN
    Más información
    88,41 €

  • DIN ISO 10110-6:2016-06

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:2015)
    1/6/2016 - PDF - Inglés - DIN
    Más información
    110,75 €

  • ISO 3040:2016 (R2021)

    Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
    11/4/2016 - - - ISO
    Más información
    152,00 €

  • DIN ISO 10110-19:2016-04

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 19: General description of surfaces and components (ISO 10110-19:2015)
    1/4/2016 - PDF - Alemán - DIN
    Más información
    74,95 €

  • DIN ISO 10110-5:2016-04

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:2015)
    1/4/2016 - PDF - Alemán - DIN
    Más información
    95,42 €

  • DIN ISO 10110-19:2016-04

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 19: General description of surfaces and components (ISO 10110-19:2015)
    1/4/2016 - PDF - Inglés - DIN
    Más información
    93,83 €

  • DIN ISO 10110-5:2016-04

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:2015)
    1/4/2016 - PDF - Inglés - DIN
    Más información
    119,44 €

  • 16/30314605 DC:2016

    BS EN ISO 5459. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    29/3/2016 - PDF - Inglés - BSI
    Más información
    44,00 €

  • ISO 18388:2016

    Technical product documentation (TPD) — Relief grooves — Types and dimensioning
    11/2/2016 - - - ISO
    Más información
    75,00 €

  • NF ISO 10110-6, S10-008-6 (10/2015)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 6 : centring tolerances - Optique et photonique
    1/10/2015 - Papier - Francés - AFNOR
    Más información
    89,33 €

  • NF ISO 10110-5, S10-008-5 (10/2015)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances - Optique et photonique
    1/10/2015 - Papier - Francés - AFNOR
    Más información
    89,33 €

  • NF ISO 10110-19, S10-008-19 (10/2015)

    Optics and photonics - Preparation of drawings for optical elements and systems - Part 19 : general description of surfaces and components - Optique et photonique
    1/10/2015 - Papier - Francés - AFNOR
    Más información
    78,00 €

  • BS ISO 10110-5:2015

    Optics and photonics. Preparation of drawings for optical elements and systems. Surface form tolerances
    31/8/2015 - PDF - Inglés - BSI
    Más información
    266,00 €

  • BS ISO 10110-19:2015

    Optics and photonics. Preparation of drawings for optical elements and systems. General description of surfaces and components
    31/7/2015 - PDF - Inglés - BSI
    Más información
    191,00 €

  • ISO 10110-5:2015

    Optics and photonics — Preparation of drawings for optical elements and systems
    23/7/2015 - - - ISO
    Más información
    152,00 €

  • ISO 10110-19:2015

    Optics and photonics — Preparation of drawings for optical elements and systems
    23/7/2015 - - - ISO
    Más información
    75,00 €

  • UNE-EN ISO 10579:2015

    Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
    17/6/2015 - - - AENOR
    Más información
    De: 53,00 €

  • BS ISO 17599:2015

    Technical product documentation (TPD). General requirements of digital mock-up for mechanical products
    28/2/2015 - PDF - Inglés - BSI
    Más información
    312,00 €

  • ISO 17599:2015 (R2024)

    Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products
    15/1/2015 - Papier - Inglés - ISO
    Más información
    152,00 €

  • DIN ISO 15786:2014-12

    Technical drawings - Simplified representation and dimensioning of holes (ISO 15786:2008)
    1/12/2014 - PDF - Alemán - DIN
    Más información
    82,15 €

  • DIN ISO 15786:2014-12

    Technical drawings - Simplified representation and dimensioning of holes (ISO 15786:2008)
    1/12/2014 - PDF - Inglés - DIN
    Más información
    102,43 €

  • NF EN ISO 10579, E04-565 (11/2013)

    Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts - Spécification géométrique des produits (GPS)
    1/11/2013 - Papier - Francés - AFNOR
    Más información
    49,33 €

  • BS EN ISO 10579:2013

    Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
    30/9/2013 - PDF - Inglés - BSI
    Más información
    191,00 €

  • NBN EN ISO 10579:2013

    Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
    20/9/2013 - PDF - Francés - NBN
    Más información
    37,00 €

  • NBN EN ISO 10579:2013

    Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
    20/9/2013 - PDF - Alemán - NBN
    Más información
    37,00 €

  • NBN EN ISO 10579:2013

    Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
    20/9/2013 - PDF - Inglés - NBN
    Más información
    37,00 €

  • BS ISO 128-15:2013

    Technical product documentation (TPD). General principles of presentation. Presentation of shipbuilding drawings
    31/7/2013 - PDF - Inglés - BSI
    Más información
    191,00 €

  • ISO 128-15:2013 (R2020)

    Technical product documentation (TPD) — General principles of presentation
    25/6/2013 - Papier - Inglés - ISO
    Más información
    75,00 €

  • DIN EN ISO 5459:2013-05

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011), German version EN ISO 5459:2011
    1/5/2013 - PDF - Inglés - DIN
    Más información
    237,66 €

  • DIN EN ISO 5459:2013-05

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011), German version EN ISO 5459:2011
    1/5/2013 - PDF - Alemán - DIN
    Más información
    190,09 €

  • BS ISO 16249:2013

    Springs. Symbols
    30/4/2013 - PDF - Inglés - BSI
    Más información
    266,00 €

  • ISO 16249:2013

    Springs — Symbols
    9/4/2013 - Papier - Inglés - ISO
    Más información
    152,00 €

  • BS ISO 13444:2012

    Technical product documentation (TPD). Dimensioning and indication of knurling
    31/8/2012 - PDF - Inglés - BSI
    Más información
    191,00 €

  • 12/30262704 DC:2012

    BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
    13/8/2012 - PDF - Inglés - BSI
    Más información
    24,00 €

  • ISO 13444:2012 (R2024)

    Technical product documentation (TPD) — Dimensioning and indication of knurling
    2/8/2012 - - - ISO
    Más información
    75,00 €

  • UNE-EN ISO 8015:2012

    Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    20/6/2012 - - - AENOR
    Más información
    De: 62,00 €

  • DIN 32869-3:2012-06

    Technical product documentation - Three-dimensional CAD-models - Part 3: Features
    1/6/2012 - PDF - Alemán - DIN
    Más información
    88,41 €

  • ISO 10579:2010/Cor 1:2011

    Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
    23/11/2011 - Papier - Inglés - ISO
    Más información
    0,00 €

  • BS EN ISO 8015:2011

    Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
    30/9/2011 - PDF - Inglés - BSI
    Más información
    191,00 €

  • Métrologie avec les normes ISO

    Manuel de tolérancement. Volume 5
    12/8/2011 - Papier - Francés - HERMES
    Más información
    94,79 €

  • NF EN ISO 8015, E04-561 (08/2011)

    Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules - Spécification géométrique des produits (GPS)
    1/8/2011 - Papier - Francés - AFNOR
    Más información
    62,33 €

  • NBN EN ISO 8015:2011

    Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    29/7/2011 - PDF - Francés - NBN
    Más información
    58,00 €

  • NBN EN ISO 8015:2011

    Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    29/7/2011 - PDF - Alemán - NBN
    Más información
    58,00 €

  • NBN EN ISO 8015:2011

    Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
    29/7/2011 - PDF - Inglés - NBN
    Más información
    58,00 €

  • ISO 8015:2011

    Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
    23/5/2011 - - - ISO
    Más información
    75,00 €

  • DD ISO/TS 128-71:2010

    Technical product documentation (TPD). General principles of presentation. Simplified representation for mechanical engineering drawings
    30/4/2011 - PDF - Inglés - BSI
    Más información
    191,00 €

  • DIN 65118:2010-09

    Welding in aerospace - Welded metallic components - Indications in design documents and general design requirements
    1/9/2010 - PDF - Inglés, Alemán - DIN
    Más información
    61,40 €

  • ISO/TS 128-71:2010 (R2024)

    Technical product documentation (TPD) — General principles of presentation
    19/8/2010 - Papier - Inglés - ISO
    Más información
    75,00 €

Elementos 1 a 200 de un total de 354

En sentido ascendente
por página

Lista  Parrilla 

Página:
  1. 1
  2. 2