Especificación geométrica de productos (GPS)
La especificación geométrica del producto (GPS) es un método estándar que tiene como objetivo definir para una pieza lo que es admisible para que sus características geométricas y funcionales sean buenas. Estas especificaciones pueden dar forma, dimensiones, acabado superficial, etc. de esta habitación.
¡El código ICS 17.040.40 agrupa todos los estándares sobre el tema!
|
Para que industrias :
- Automotor
- Aeronáutica
- Ferrocarril
Encuentra nuestra selección :
|
|
-
BS EN ISO 286-2:2010
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations holes shafts
31/8/2013 - PDF - Inglés - BSI
Más información348,00 € -
BS EN ISO 286-1:2010
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
31/8/2013 - PDF - Inglés - BSI
Más información331,00 € -
NF E02-352 (08/2013)
Geometrical product specifications (GPS) - General tolerances (dimensional and geometrical) for cutted and bended workpieces - Spécification géométrique des produits (GPS)
1/8/2013 - Papel - Francés - AFNOR
Más información99,33 € -
ISO 14253-2:2011/Cor 1:2013
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
15/7/2013 - Papel - Inglés - ISO
Más información0,00 € -
ISO 14253-2:2011/Cor 1:2013
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
15/7/2013 - Papel - Francés - ISO
Más información0,00 € -
PD ISO/TS 17863:2013
Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
30/6/2013 - PDF - Inglés - BSI
Más información250,00 € -
DIN EN ISO 16610-21:2013-06
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011), German version EN ISO 16610-21:2012
1/6/2013 - PDF - Inglés - DIN
Más información115,98 € -
DIN EN ISO 16610-21:2013-06
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011), German version EN ISO 16610-21:2012
1/6/2013 - PDF - Alemán - DIN
Más información92,62 € -
BS EN ISO 16610-85:2013
Geometrical product specifications (GPS). Filtration. Morphological areal filters: Segmentation
31/5/2013 - PDF - Inglés - BSI
Más información293,00 € -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
8/5/2013 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
8/5/2013 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
8/5/2013 - PDF - Español - AENOR
Más información71,00 € -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
8/5/2013 - PDF - Inglés - AENOR
Más información85,20 € -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
8/5/2013 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
8/5/2013 - PDF - Inglés - AENOR
Más información81,60 € -
DIN EN ISO 5459:2013-05
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011), German version EN ISO 5459:2011
1/5/2013 - PDF - Inglés - DIN
Más información230,75 € -
DIN EN ISO 16610-85:2013-05
Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013), German version EN ISO 16610-85:2013
1/5/2013 - PDF - Alemán - DIN
Más información99,35 € -
DIN EN ISO 16610-85:2013-05
Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013), German version EN ISO 16610-85:2013
1/5/2013 - PDF - Inglés - DIN
Más información124,21 € -
DIN EN ISO 5459:2013-05
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011), German version EN ISO 5459:2011
1/5/2013 - PDF - Alemán - DIN
Más información184,58 € -
ISO/TS 17863:2013 (R2022)
Geometrical product specification (GPS)
Tolerancing of moveable assemblies
18/4/2013 - Papel - Francés - ISO
Más información110,00 € -
ISO/TS 17863:2013 (R2022)
Geometrical product specification (GPS)
Tolerancing of moveable assemblies
18/4/2013 - Papel - Inglés - ISO
Más información110,00 € -
13/30272930 DC:2013
BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
15/4/2013 - PDF - Inglés - BSI
Más información24,00 € -
DIN EN ISO 17450-2:2013-04
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012), German version EN ISO 17450-2:2012
1/4/2013 - PDF - Alemán - DIN
Más información85,79 € -
DIN EN ISO 17450-2:2013-04
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012), German version EN ISO 17450-2:2012
1/4/2013 - PDF - Inglés - DIN
Más información107,48 € -
DIN EN ISO 5436-2:2013-04
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012), German version EN ISO 5436-2:2012
1/4/2013 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 5436-2:2013-04
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012), German version EN ISO 5436-2:2012
1/4/2013 - PDF - Inglés - DIN
Más información99,44 € -
JIS B 0601:2013 (R2017)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
21/3/2013 - PDF - Japonés - JSA
Más información46,02 € -
FD ISO/TR 14253-6, E10-201-6 (03/2013)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6 : generalized decision rules for the acceptance and rejection of instruments and workpieces - Spécification géométrique des produits (GPS)
1/3/2013 - Papel - Francés - AFNOR
Más información75,67 € -
13/30273328 DC:2013
BS ISO 16610-32. Geometrical product specifications (GPS). Filtration. Part 32. Robust profile filters: Spline filters
14/1/2013 - PDF - Inglés - BSI
Más información24,00 € -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
19/12/2012 - PDF - Español - AENOR
Más información74,00 € -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
19/12/2012 - PDF - Inglés - AENOR
Más información88,80 € -
DIN EN ISO 13102:2012-12
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012), German version EN ISO 13102:2012
1/12/2012 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 13102:2012-12
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012), German version EN ISO 13102:2012
1/12/2012 - PDF - Inglés - DIN
Más información91,12 € -
NF E04-009 (12/2012)
Geometrical product specification (GPS) - Hierarchical organization of product/process characteristics - Spécification géométrique des produits (GPS)
1/12/2012 - Papel - Francés - AFNOR
Más información99,33 € -
NF EN ISO 5436-2, E05-053-2 (12/2012)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Measurement standards - Part 2 : software measurement standards - Spécification géométrique des produits (GPS)
1/12/2012 - Papel - Francés - AFNOR
Más información75,67 € -
ISO/TR 14253-6:2012
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
15/11/2012 - Papel - Francés - ISO
Más información110,00 € -
ISO/TR 14253-6:2012
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
15/11/2012 - Papel - Inglés - ISO
Más información110,00 € -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
14/11/2012 - PDF - Español - AENOR
Más información104,00 € -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
14/11/2012 - PDF - Inglés - AENOR
Más información124,80 € -
DIN EN ISO 25178-3:2012-11
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012), German version EN ISO 25178-3:2012
1/11/2012 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 25178-3:2012-11
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012), German version EN ISO 25178-3:2012
1/11/2012 - PDF - Inglés - DIN
Más información99,44 € -
NF EN ISO 16610-21, E05-040-21 (11/2012)
Geometrical product specifications (GPS) - Filtration - Part 21 : linear profile filters : gaussian filters - Spécification géométrique des produits (GPS)
1/11/2012 - Papel - Francés - AFNOR
Más información86,67 € -
NF EN ISO 17450-2, E04-001-2 (11/2012)
Geometrical product specifications (GPS) - General concepts - Part 2 : basic tenets, specifications, operators, uncertainties and ambiguities - Spécification géométrique des produits (GPS)
1/11/2012 - Papel - Francés - AFNOR
Más información75,67 € -
BS EN ISO 17450-2:2012
Geometrical product specifications (GPS). General concepts. Basic tenets, specifications, operators, uncertainties and ambiguities
31/10/2012 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 5436-2:2012
Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards. Software measurement standards
31/10/2012 - PDF - Inglés - BSI
Más información250,00 € -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
3/10/2012 - PDF - Español - AENOR
Más información126,00 € -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
3/10/2012 - PDF - Inglés - AENOR
Más información151,20 € -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
3/10/2012 - PDF - Español - AENOR
Más información63,00 € -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
3/10/2012 - PDF - Inglés - AENOR
Más información75,60 € -
NF EN ISO 13102, E11-058 (10/2012)
Geometrical product specifications (GPS) - dimensional measuring equipment : electronic digital-indicator gauge - Design and metrological characteristics - Spécification géométrique des produits (GPS)
1/10/2012 - Papel - Francés - AFNOR
Más información75,67 € -
BS EN ISO 13102:2012
Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
30/9/2012 - PDF - Inglés - BSI
Más información250,00 € -
ISO 17450-2:2012 (R2023)
Geometrical product specifications (GPS)
General concepts
24/9/2012 - Papel - Francés - ISO
Más información110,00 € -
ISO 17450-2:2012 (R2023)
Geometrical product specifications (GPS)
General concepts
24/9/2012 - Papel - Inglés - ISO
Más información110,00 € -
BS EN ISO 16610-21:2012
Geometrical product specifications (GPS). Filtration. Linear profile filters: Gaussian filters
31/8/2012 - PDF - Inglés - BSI
Más información293,00 € -
12/30262704 DC:2012
BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
13/8/2012 - PDF - Inglés - BSI
Más información24,00 € -
DIN EN ISO 13225:2012-08
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012), German version EN ISO 13225:2012
1/8/2012 - PDF - Alemán - DIN
Más información92,62 € -
DIN EN ISO 13225:2012-08
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012), German version EN ISO 13225:2012
1/8/2012 - PDF - Inglés - DIN
Más información115,98 € -
BS EN ISO 25178-3:2012
Geometrical product specifications (GPS). Surface texture: Areal. Specification operators
31/7/2012 - PDF - Inglés - BSI
Más información250,00 € -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
25/7/2012 - PDF - Español - AENOR
Más información124,00 € -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
25/7/2012 - PDF - Inglés - AENOR
Más información148,80 € -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
11/7/2012 - PDF - Español - AENOR
Más información53,00 € -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
11/7/2012 - PDF - Inglés - AENOR
Más información63,60 € -
NF EN ISO 13225, E11-106 (07/2012)
Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics - Spécification géométrique des produits (GPS)
1/7/2012 - Papel - Francés - AFNOR
Más información86,67 € -
UNE-EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) (Endorsed by AENOR in July of 2012.)
1/7/2012 - PDF - Inglés - AENOR
Más información66,00 € -
UNE-EN ISO 22432:2011
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) (Endorsed by AENOR in July of 2012.)
1/7/2012 - PDF - Inglés - AENOR
Más información90,00 € -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
20/6/2012 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
20/6/2012 - PDF - Inglés - AENOR
Más información72,00 € -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
13/6/2012 - PDF - Español - AENOR
Más información87,00 € -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
13/6/2012 - PDF - Inglés - AENOR
Más información104,40 € -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - Inglés - AENOR
Más información72,00 € -
DIN EN ISO 17450-1:2012-04
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011), German version EN ISO 17450-1:2011
1/4/2012 - PDF - Alemán - DIN
Más información148,04 € -
DIN EN ISO 17450-1:2012-04
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011), German version EN ISO 17450-1:2011
1/4/2012 - PDF - Inglés - DIN
Más información184,86 € -
DIN EN ISO 1119:2012-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011), German version EN ISO 1119:2011
1/4/2012 - PDF - Alemán - DIN
Más información65,89 € -
DIN EN ISO 1119:2012-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011), German version EN ISO 1119:2011
1/4/2012 - PDF - Inglés - DIN
Más información82,52 € -
DIN EN ISO 22432:2012-03
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011), German version EN ISO 22432:2011
1/3/2012 - PDF - Alemán - DIN
Más información131,96 € -
DIN EN ISO 22432:2012-03
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011), German version EN ISO 22432:2011
1/3/2012 - PDF - Inglés - DIN
Más información164,95 € -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
15/2/2012 - PDF - Español - AENOR
Más información63,00 € -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
15/2/2012 - PDF - Inglés - AENOR
Más información75,60 € -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
8/2/2012 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
8/2/2012 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
8/2/2012 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
8/2/2012 - PDF - Inglés - AENOR
Más información72,00 € -
12/30242157 DC:2012
BS EN ISO 14253-1 AMD1. Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
6/2/2012 - PDF - Inglés - BSI
Más información24,00 € -
NF EN ISO 17450-1, E04-001-1 (02/2012)
Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification - Spécification géométrique des produits (GPS)
1/2/2012 - Papel - Francés - AFNOR
Más información144,67 € -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
1/2/2012 - PDF - Español - AENOR
Más información70,00 € -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
1/2/2012 - PDF - Inglés - AENOR
Más información84,00 € -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
1/2/2012 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
1/2/2012 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
1/2/2012 - PDF - Español - AENOR
Más información63,00 € -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
1/2/2012 - PDF - Inglés - AENOR
Más información75,60 € -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
1/2/2012 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
1/2/2012 - PDF - Inglés - AENOR
Más información72,00 € -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
1/2/2012 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
1/2/2012 - PDF - Inglés - AENOR
Más información81,60 € -
BS EN ISO 17450-1:2011
Geometrical product specifications (GPS). General concepts. Model for geometrical specification and verification
31/1/2012 - PDF - Inglés - BSI
Más información377,00 € -
BS EN ISO 1119:2011
Geometrical product specifications (GPS). Series of conical tapers and taper angles
31/1/2012 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 22432:2011
Geometrical product specifications (GPS). Features utilized in specification and verification
31/12/2011 - PDF - Inglés - BSI
Más información348,00 € -
ISO 17450-1:2011 (R2022)
Geometrical product specifications (GPS)
General concepts
5/12/2011 - Papel - Francés - ISO
Más información223,00 € -
ISO 17450-1:2011 (R2022)
Geometrical product specifications (GPS)
General concepts
5/12/2011 - Papel - Inglés - ISO
Más información223,00 € -
DIN EN ISO 25378:2011-12
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011), German version EN ISO 25378:2011
1/12/2011 - PDF - Alemán - DIN
Más información141,96 € -
DIN EN ISO 25378:2011-12
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011), German version EN ISO 25378:2011
1/12/2011 - PDF - Inglés - DIN
Más información177,38 € -
NF EN ISO 15530-3, E11-160-3 (12/2011)
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards - Spécification géométrique des produits (GPS)
1/12/2011 - Papel - Francés - AFNOR
Más información75,67 € -
ISO 22432:2011 (R2022)
Geometrical product specifications (GPS)
Features utilized in specification and verification
8/11/2011 - Papel - Francés - ISO
Más información199,00 € -
ISO 22432:2011 (R2022)
Geometrical product specifications (GPS)
Features utilized in specification and verification
8/11/2011 - Papel - Inglés - ISO
Más información199,00 € -
NF EN ISO 5459, E04-554 (11/2011)
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems - Spécification géométrique des produits (GPS)
1/11/2011 - Papel - Francés - AFNOR
Más información154,67 € -
BS EN ISO 15530-3:2011
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards
31/10/2011 - PDF - Inglés - BSI
Más información250,00 € -
DIN EN ISO 14253-3:2011-10
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011), German version EN ISO 14253-3:2011
1/10/2011 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 14253-3:2011-10
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011), German version EN ISO 14253-3:2011
1/10/2011 - PDF - Inglés - DIN
Más información91,12 € -
BS EN ISO 8015:2011
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
30/9/2011 - PDF - Inglés - BSI
Más información180,00 € -
DIN EN ISO 8015:2011-09
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011), German version EN ISO 8015:2011
1/9/2011 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 8015:2011-09
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011), German version EN ISO 8015:2011
1/9/2011 - PDF - Inglés - DIN
Más información91,12 € -
DIN EN ISO 10360-7:2011-09
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011), German version EN ISO 10360-7:2011
1/9/2011 - PDF - Alemán - DIN
Más información120,84 € -
DIN EN ISO 10360-7:2011-09
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011), German version EN ISO 10360-7:2011
1/9/2011 - PDF - Inglés - DIN
Más información150,93 € -
BS EN ISO 5459:2011
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
31/8/2011 - PDF - Inglés - BSI
Más información377,00 € -
NF EN ISO 8015, E04-561 (08/2011)
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules - Spécification géométrique des produits (GPS)
1/8/2011 - Papel - Francés - AFNOR
Más información60,50 € -
NF EN ISO 10360-7, E11-150-7 (08/2011)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems - Spécification géométrique des produits (GPS)
1/8/2011 - Papel - Francés - AFNOR
Más información108,00 € -
DIN EN ISO 12781-1:2011-07
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011), German version EN ISO 12781-1:2011
1/7/2011 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 12781-1:2011-07
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011), German version EN ISO 12781-1:2011
1/7/2011 - PDF - Inglés - DIN
Más información91,12 € -
DIN EN ISO 12781-2:2011-07
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011), German version EN ISO 12781-2:2011
1/7/2011 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 12781-2:2011-07
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011), German version EN ISO 12781-2:2011
1/7/2011 - PDF - Inglés - DIN
Más información99,44 € -
DIN EN ISO 12180-1:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011), German version EN ISO 12180-1:2011
1/7/2011 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 12180-1:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011), German version EN ISO 12180-1:2011
1/7/2011 - PDF - Inglés - DIN
Más información99,44 € -
DIN EN ISO 12180-2:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011), German version EN ISO 12180-2:2011
1/7/2011 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 12180-2:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011), German version EN ISO 12180-2:2011
1/7/2011 - PDF - Inglés - DIN
Más información91,12 € -
DIN EN ISO 12181-1:2011-07
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011), German version EN ISO 12181-1:2011
1/7/2011 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 12181-1:2011-07
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011), German version EN ISO 12181-1:2011
1/7/2011 - PDF - Inglés - DIN
Más información99,44 € -
DIN EN ISO 12181-2:2011-07
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011), German version EN ISO 12181-2:2011
1/7/2011 - PDF - Alemán - DIN
Más información65,89 € -
DIN EN ISO 12181-2:2011-07
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011), German version EN ISO 12181-2:2011
1/7/2011 - PDF - Inglés - DIN
Más información82,52 € -
DIN EN ISO 12780-2:2011-07
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011), German version EN ISO 12780-2:2011
1/7/2011 - PDF - Alemán - DIN
Más información65,89 € -
DIN EN ISO 12780-2:2011-07
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011), German version EN ISO 12780-2:2011
1/7/2011 - PDF - Inglés - DIN
Más información82,52 € -
NF EN ISO 14253-3, E10-201-3 (07/2011)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3 : guidelines for achieving agreements on measurement uncertainty statements - Spécification géométrique des produits (GPS)
1/7/2011 - Papel - Francés - AFNOR
Más información75,67 € -
NF EN ISO 14253-2, E10-201-2 (07/2011)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 : guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Spécification géométrique des produits (GPS)
1/7/2011 - Papel - Francés - AFNOR
Más información144,67 € -
BS EN ISO 10360-7:2011
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs equipped with imaging probing systems
30/6/2011 - PDF - Inglés - BSI
Más información331,00 € -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
17/6/2011 - PDF - Francés - NBN
Más información205,00 € -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
17/6/2011 - PDF - Alemán - NBN
Más información205,00 € -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
17/6/2011 - PDF - Inglés - NBN
Más información205,00 € -
NF EN ISO 25378, E04-571 (06/2011)
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions - Spécification géométrique des produits
1/6/2011 - Papel - Francés - AFNOR
Más información144,67 € -
BS EN ISO 25378:2011
Geometrical product specifications (GPS). Characteristics and conditions. Definitions
31/5/2011 - PDF - Inglés - BSI
Más información348,00 € -
BS EN ISO 12180-1:2011
Geometrical product specifications (GPS). Cylindricity. Vocabulary and parameters of cylindrical form
31/5/2011 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 14253-3:2011
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidelines for achieving agreements on measurement uncertainty statements
31/5/2011 - PDF - Inglés - BSI
Más información250,00 € -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
11/5/2011 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
11/5/2011 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
11/5/2011 - PDF - Español - AENOR
Más información77,00 € -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
11/5/2011 - PDF - Inglés - AENOR
Más información92,40 € -
UNE-EN ISO 25178-701:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
11/5/2011 - PDF - Español - AENOR
Más información74,00 € -
UNE-EN ISO 25178-701:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
11/5/2011 - PDF - Inglés - AENOR
Más información88,80 € -
NF EN ISO 12181-1, E10-113-1 (05/2011)
Geometrical product specifications (GPS) - Roundness - Part 1 : vocabulary and parameters of roundness - Spécification géométrique des produits (GPS)
1/5/2011 - Papel - Francés - AFNOR
Más información75,67 € -
NF EN ISO 12181-2, E10-113-2 (05/2011)
Geometrical product specifications (GPS) - Roundness - Part 2 : specification operators - Spécification géométrique des produits (GPS)
1/5/2011 - Papel - Francés - AFNOR
Más información60,67 € -
BS EN ISO 12180-2:2011
Geometrical product specifications (GPS). Cylindricity. Specification operators
30/4/2011 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 12181-1:2011
Geometrical product specifications (GPS). Roundness. Vocabulary and parameters of roundness
30/4/2011 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 12181-2:2011
Geometrical product specifications (GPS). Roundness. Specification operators
30/4/2011 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 12780-1:2011
Geometrical product specifications (GPS). Straightness. Vocabulary and parameters of straightness
30/4/2011 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 12780-2:2011
Geometrical product specifications (GPS). Straightness. Specification operators
30/4/2011 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 12781-1:2011
Geometrical product specifications (GPS). Flatness. Vocabulary and parameters of flatness
30/4/2011 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 12781-2:2011
Geometrical product specifications (GPS). Flatness. Specification operators
30/4/2011 - PDF - Inglés - BSI
Más información250,00 € -
ISO 14253-3:2011 (R2021)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
12/4/2011 - Papel - Francés - ISO
Más información72,00 € -
ISO 14253-2:2011 (R2023)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
12/4/2011 - Papel - Francés - ISO
Más información223,00 € -
ISO 14253-3:2011 (R2021)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
12/4/2011 - Papel - Inglés - ISO
Más información72,00 € -
DIN EN ISO 14406:2011-04
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010), German version EN ISO 14406:2010
1/4/2011 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 14406:2011-04
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010), German version EN ISO 14406:2010
1/4/2011 - PDF - Inglés - DIN
Más información99,44 € -
ISO 25378:2011 (R2021)
Geometrical product specifications (GPS)
Characteristics and conditions
29/3/2011 - Papel - Francés - ISO
Más información223,00 € -
ISO 25378:2011 (R2021)
Geometrical product specifications (GPS)
Characteristics and conditions
29/3/2011 - Papel - Inglés - ISO
Más información223,00 € -
UNE-EN ISO 286-2:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
2/3/2011 - PDF - Español - AENOR
Más información99,00 € -
UNE-EN ISO 286-2:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
2/3/2011 - PDF - Inglés - AENOR
Más información118,80 € -
DIN EN ISO 3611:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010), German version EN ISO 3611:2010
1/3/2011 - PDF - Alemán - DIN
Más información92,62 € -
DIN EN ISO 3611:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010), German version EN ISO 3611:2010
1/3/2011 - PDF - Inglés - DIN
Más información115,98 € -
DIN EN ISO 9493:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010), German version EN ISO 9493:2010
1/3/2011 - PDF - Alemán - DIN
Más información85,79 € -
DIN EN ISO 9493:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010), German version EN ISO 9493:2010
1/3/2011 - PDF - Inglés - DIN
Más información107,48 € -
UNE-EN ISO 286-1:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
23/2/2011 - PDF - Español - AENOR
Más información85,00 € -
UNE-EN ISO 286-1:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
23/2/2011 - PDF - Inglés - AENOR
Más información102,00 € -
NF EN ISO 9493, E11-054 (02/2011)
Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics - Spécification géométrique des produits (GPS)
1/2/2011 - Papel - Francés - AFNOR
Más información86,67 € -
250,00 €
-
DIN EN ISO 25178-601:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010), German version EN ISO 25178-601:2010
1/1/2011 - PDF - Alemán - DIN
Más información85,79 € -
DIN EN ISO 25178-601:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010), German version EN ISO 25178-601:2010
1/1/2011 - PDF - Inglés - DIN
Más información107,48 € -
DIN EN ISO 25178-602:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010), German version EN ISO 25178-602:2010
1/1/2011 - PDF - Alemán - DIN
Más información104,95 € -
DIN EN ISO 25178-602:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010), German version EN ISO 25178-602:2010
1/1/2011 - PDF - Inglés - DIN
Más información131,40 € -
DIN EN ISO 25178-701:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010), German version EN ISO 25178-701:2010
1/1/2011 - PDF - Alemán - DIN
Más información99,35 € -
DIN EN ISO 25178-701:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010), German version EN ISO 25178-701:2010
1/1/2011 - PDF - Inglés - DIN
Más información124,21 € -
UNE-EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
15/12/2010 - PDF - Español - AENOR
Más información77,00 € -
UNE-EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
15/12/2010 - PDF - Inglés - AENOR
Más información92,40 € -
UNE-EN ISO 25178-6:2010
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
15/12/2010 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 25178-6:2010
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
15/12/2010 - PDF - Inglés - AENOR
Más información72,00 € -
ISO 14406:2010 (R2022)
Geometrical product specifications (GPS)
Extraction
9/12/2010 - Papel - Francés - ISO
Más información110,00 € -
110,00 €
-
DIN CEN ISO/TS 14253-4*DIN SPEC 1177:2010-11
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010), German version CEN ISO/TS 14253-4:2010
1/11/2010 - PDF - Alemán - DIN
Más información63,64 € -
JIS B 0642:2010 (R2015)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
21/9/2010 - PDF - Japonés - JSA
Más información46,02 € -
NF EN ISO 286-2, E02-100-2 (09/2010)
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts - Spécification géométrique des produits (GPS)
1/9/2010 - Papel - Francés - AFNOR
Más información130,67 € -
NF EN ISO 286-1, E02-100-1 (09/2010)
Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits - Spécification géométrique des produits (GPS)
1/9/2010 - Papel - Francés - AFNOR
Más información108,33 € -
NF EN ISO 25178-602, E05-031-602 (08/2010)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments - Spécification géométrique des produits (GPS)
1/8/2010 - Papel - Francés - AFNOR
Más información99,33 € -
NF EN ISO 25178-701, E05-031-701 (08/2010)
Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments - Spécification géométrique des produits (GPS)
1/8/2010 - Papel - Francés - AFNOR
Más información86,50 € -
NF EN ISO 25178-601, E05-031-601 (08/2010)
Geometrical product specifications (GPS) - Surface texture : areal - Part 601 : nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS)
1/8/2010 - Papel - Francés - AFNOR
Más información75,67 € -
BS EN ISO 25178-601:2010
Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of contact (stylus) instruments
31/7/2010 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 25178-602:2010
Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of non-contact (confocal chromatic probe) instruments
31/7/2010 - PDF - Inglés - BSI
Más información293,00 € -
BS EN ISO 25178-701:2010
Geometrical product specifications (GPS). Surface texture. Areal. Calibration and measurement standards for contact (stylus) instruments
31/7/2010 - PDF - Inglés - BSI
Más información293,00 € -
XP CEN ISO/TS 14253-4, E10-201-4 (07/2010)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4 : Background on functional limits and specification limits in decision rules - Spécification géométrique des produits (GPS)
1/7/2010 - Papel - Francés - AFNOR
Más información75,67 € -
DD CEN ISO/TS 14253-4:2010
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Background on functional limits and specification limits in decision rules
30/6/2010 - PDF - Inglés - BSI
Más información250,00 € -
DIN EN ISO 10360-2:2010-06
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009), German version EN ISO 10360-2:2009
1/6/2010 - PDF - Alemán - DIN
Más información104,95 €