Especificación geométrica de productos (GPS)
La especificación geométrica del producto (GPS) es un método estándar que tiene como objetivo definir para una pieza lo que es admisible para que sus características geométricas y funcionales sean buenas. Estas especificaciones pueden dar forma, dimensiones, acabado superficial, etc. de esta habitación.
¡El código ICS 17.040.40 agrupa todos los estándares sobre el tema!
|
Para que industrias :
- Automotor
- Aeronáutica
- Ferrocarril
Encuentra nuestra selección :
|
|
-
25,00 €
-
JIS B 0621:1984 (R2014)
Definitions and designations of geometrical deviations
1/2/1984 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0403:1995 (R2015)
Castings - System of dimensional tolerances and machining allowances
1/2/1995 - PDF - Japonés - JSA
Más información35,97 € -
JIS B 0023:1996 (R2015)
Technical drawings - Geometrical tolerancing - Maximum material requirement and least material requirement
1/1/1996 - PDF - Japonés - JSA
Más información25,00 € -
NF E11-017 (12/1996) (R2002)
Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods. - Spécification géométrique des produits (GPS)
1/12/1996 - Papel - Francés - AFNOR
Más información60,67 € -
BS EN ISO 3274:1998
Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
15/5/1997 - PDF - Inglés - BSI
Más información180,00 € -
BS EN ISO 13565-1:1998
Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
15/5/1997 - PDF - Inglés - BSI
Más información180,00 € -
JIS B 7451:1997 (R2017)
Instruments for the assessment of departure from roundness - Measurement of variations in radius
20/11/1997 - PDF - Japonés - JSA
Más información36,27 € -
JIS B 0021:1998 (R2013)
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out
20/1/1998 - PDF - Japonés - JSA
Más información52,91 € -
JIS B 0025:1998 (R2013)
Technical drawings - Geometrical tolerancing - Positional tolerancing
20/1/1998 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0026:1998 (R2013)
Technical drawings - Dimensioning and tolerancing - Non-rigid parts
20/1/1998 - PDF - Japonés - JSA
Más información25,00 € -
NF E11-097 (02/1998)
Geometrical product specification (GPS). Length measuring instruments. Screw micrometers depth gauges. Specifications. Test methods. - Spécification géométrique des produits (GPS)
1/2/1998 - Papel - Francés - AFNOR
Más información99,33 € -
NF EN ISO 3274, E05-052 (03/1998)
Geometrical product specifications (GPS) - Surface texture : profile method - Nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS)
1/3/1998 - Papel - Francés - AFNOR
Más información86,67 € -
NF EN ISO 13565-1, E05-021 (03/1998)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 1 : filtering and general measurement conditions - Spécification géométrique des produits (GPS)
1/3/1998 - Papel - Francés - AFNOR
Más información75,50 € -
NF EN ISO 12085, E05-020 (03/1998)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Motif parameters - Spécification géométrique des produits (GPS)
1/3/1998 - Papel - Francés - AFNOR
Más información99,33 € -
25,00 €
-
25,00 €
-
DIN EN ISO 3274:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996), German version EN ISO 3274:1997
1/4/1998 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 3274:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996), German version EN ISO 3274:1997
1/4/1998 - PDF - Inglés - DIN
Más información91,12 € -
DIN EN ISO 13565-1:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996), German version EN ISO 13565-1:1997
1/4/1998 - PDF - Alemán - DIN
Más información52,90 € -
DIN EN ISO 13565-1:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996), German version EN ISO 13565-1:1997
1/4/1998 - PDF - Inglés - DIN
Más información66,07 € -
DIN EN ISO 12085:1998-05
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996), German version EN ISO 12085:1997
1/5/1998 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 12085:1998-05
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996), German version EN ISO 12085:1997
1/5/1998 - PDF - Inglés - DIN
Más información99,44 € -
UNE-EN ISO 12085:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
27/5/1998 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 12085:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
27/5/1998 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
18/6/1998 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
18/6/1998 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
11/8/1998 - PDF - Español - AENOR
Más información57,00 € -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
11/8/1998 - PDF - Inglés - AENOR
Más información68,40 € -
DIN EN ISO 3650:1999-02
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998), German version EN ISO 3650:1998
1/2/1999 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 3650:1999-02
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998), German version EN ISO 3650:1998
1/2/1999 - PDF - Inglés - DIN
Más información91,12 € -
NF EN ISO 3650, E11-010 (03/1999)
Geometrical product specifications (GPS) - Length standards - Gauge blocks - Spécification géométrique des produits (GPS)
1/3/1999 - Papel - Francés - AFNOR
Más información99,33 € -
BS EN ISO 3650:1999
Geometrical product specifications (GPS). Length standards. Gauge blocks
15/5/1999 - PDF - Inglés - BSI
Más información250,00 € -
DIN EN ISO 8785:1999-10
Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998), German version EN ISO 8785:1999
1/10/1999 - PDF - Alemán - DIN
Más información59,63 € -
BS EN ISO 8785:1999
Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
15/10/1999 - PDF - Inglés - BSI
Más información250,00 € -
NF EN ISO 8785, E05-019 (12/1999)
Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters - Spécification géométrique des produits (GPS)
1/12/1999 - Papel - Inglés, Francés - AFNOR
Más información90,00 € -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
21/1/2000 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
21/1/2000 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
28/2/2000 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
28/2/2000 - PDF - Inglés - AENOR
Más información72,00 € -
JIS B 0027:2000 (R2014)
Technical drawings - Dimensioning and tolerancing of profiles
20/3/2000 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0029:2000 (R2014)
Technical drawings - Tolerancing of orientation and location - Projected tolerance zone
20/3/2000 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0631:2000 (R2014)
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters
20/3/2000 - PDF - Japonés - JSA
Más información36,27 € -
BS EN ISO 14660-1:2000
Geometrical product specifications (GPS). features General terms and definitions
15/7/2000 - PDF - Inglés - BSI
Más información180,00 € -
DIN EN ISO 10360-3:2000-08
Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000), German version EN ISO 10360-3:2000
1/8/2000 - PDF - Alemán - DIN
Más información59,63 € -
DIN EN ISO 10360-3:2000-08
Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000), German version EN ISO 10360-3:2000
1/8/2000 - PDF - Inglés - DIN
Más información74,58 € -
NF EN ISO 5436-1, E05-053-1 (08/2000)
Geometrical product specifications (GPS) - Surface texture : profile method : measurement standards - Part 1 : material measures - Spécification géométrique des produits (GPS)
1/8/2000 - Papel - Francés - AFNOR
Más información86,67 € -
NF EN ISO 10360-3, E11-150-3 (08/2000)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis - Spécification géométrique des produits (GPS)
1/8/2000 - Papel - Francés - AFNOR
Más información86,67 € -
DIN EN ISO 5436-1:2000-11
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures (ISO 5436-1:2000), German version EN ISO 5436-1:2000
1/11/2000 - PDF - Alemán - DIN
Más información85,79 € -
DIN EN ISO 5436-1:2000-11
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures (ISO 5436-1:2000), German version EN ISO 5436-1:2000
1/11/2000 - PDF - Inglés - DIN
Más información107,48 € -
NF E02-353 (01/2001) (R2011)
Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances - Spécification géométrique des produits (GPS)
1/1/2001 - Papel - Francés - AFNOR
Más información86,67 € -
JIS B 0651/ERRATUM 1:2001
Geometrical Product Specification (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (Erratum 1)
1/1/2001 - PDF - Japonés - JSA
Más información0,00 € -
JIS B 0633:2001 (R2015)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
20/1/2001 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0651:2001 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
20/1/2001 - PDF - Japonés - JSA
Más información36,27 € -
NF EN ISO 10360-1, E11-150-1 (03/2001)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1 : vocabulary - Spécification géométrique des produits (GPS)
1/3/2001 - Papel - Inglés, Francés - AFNOR
Más información118,00 € -
JIS B 0641-1:2001 (R2015)
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or nonconformance with specifications
20/3/2001 - PDF - Japonés - JSA
Más información25,00 € -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
30/4/2001 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
30/4/2001 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
22/5/2001 - PDF - Español - AENOR
Más información60,00 € -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
22/5/2001 - PDF - Inglés - AENOR
Más información72,00 € -
BS EN ISO 5436-1:2001
Geometrical Product Specifications (GPS). Surface texture: Profile method, Measurement standards Geometric product specifications texture. method calibration.
23/8/2001 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 10360-3:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of rotary table as fourth
15/10/2001 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 10360-1:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
15/10/2001 - PDF - Inglés - BSI
Más información348,00 € -
DIN 2284-2:2001-12
Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información45,98 € -
DIN 2284-2:2001-12
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
1/12/2001 - PDF - Inglés - DIN
Más información57,57 € -
DIN 2283-2:2001-12
Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2283-2:2001-12
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm
1/12/2001 - PDF - Inglés - DIN
Más información40,56 € -
DIN 2283-1:2001-12
Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2283-1:2001-12
Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
1/12/2001 - PDF - Inglés - DIN
Más información40,56 € -
DIN 2282-2:2001-12
Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 2: "GO" workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información45,98 € -
DIN 2282-2:2001-12
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
1/12/2001 - PDF - Inglés - DIN
Más información57,57 € -
DIN 2281-2:2001-12
Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 2: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2281-2:2001-12
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
1/12/2001 - PDF - Inglés - DIN
Más información40,56 € -
DIN 2281-1:2001-12
Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2281-1:2001-12
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
1/12/2001 - PDF - Inglés - DIN
Más información40,56 € -
DIN 2280:2001-12
Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2280:2001-12
Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
1/12/2001 - PDF - Inglés - DIN
Más información40,56 € -
DIN 2279:2001-12
Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads, Survey, inscription, marking, application
1/12/2001 - PDF - Alemán - DIN
Más información85,79 € -
DIN 2279:2001-12
Geometrical product specifications (GPS) - Gauges for internal and external ISO metric screw threads - Overview of types, marking and application
1/12/2001 - PDF - Inglés - DIN
Más información107,48 € -
DIN 2240-2:2001-12
Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter, Handles, fixing screws and clamps
1/12/2001 - PDF - Alemán - DIN
Más información45,98 € -
DIN 2240-2:2001-12
Geometrical product specification (GPS) - Gauge handles for gauging members over 40 mm nominal diameter: Handles, fixing screws and locking prongs
1/12/2001 - PDF - Inglés - DIN
Más información57,57 € -
DIN 2240-1:2001-12
Geometrical Product Specification (GPS) - Handles - Part 1: For gauging members with taper lock 1:50 up to 40 mm nominal diameter
1/12/2001 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2240-1:2001-12
Geometrical Product Specification (GPS) - Gauge handles for gauging members up to 40 mm nominal diameter with 1:50 taper shank
1/12/2001 - PDF - Inglés - DIN
Más información40,56 € -
UNE-EN ISO 3650:2001 ERRATUM (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS. (ISO 3650:1998)
17/12/2001 - PDF - Español - AENOR
Más información0,00 € -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
17/12/2001 - PDF - Español - AENOR
Más información76,00 € -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
17/12/2001 - PDF - Inglés - AENOR
Más información91,20 € -
JIS B 0651/ERRATUM 2:2002
Geometrical Product Specification (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (Erratum 2)
1/1/2002 - PDF - Japonés - JSA
Más información0,00 € -
NF EN ISO 10360-6, E11-150-6 (02/2002)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 : estimation of errors in computing Gaussian associated features - Spécification géométrique des produits (GPS)
1/2/2002 - Papel - Francés - AFNOR
Más información99,00 € -
JIS B 0659-1:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures
20/3/2002 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0670:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
20/3/2002 - PDF - Japonés - JSA
Más información36,27 € -
JIS B 0671-1:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
20/3/2002 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0671-2:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
20/3/2002 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0671-3:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
20/3/2002 - PDF - Japonés - JSA
Más información41,86 € -
JIS B 0672-1:2002 (R2013)
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions
20/9/2002 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0672-2:2002 (R2013)
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
20/9/2002 - PDF - Japonés - JSA
Más información25,00 € -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
20/11/2002 - PDF - Español - AENOR
Más información70,00 € -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
20/11/2002 - PDF - Inglés - AENOR
Más información84,00 € -
NF E11-019 (12/2002)
Geometrical product specification (GPS) - Specific standards - Rules of design and characteristics - Spécification géométrique des produits (GPS)
1/12/2002 - Papel - Francés - AFNOR
Más información86,67 € -
NF E11-107 (12/2002)
Geometrical Product Specification (GPS) - Spheres for metrology - Spécification géométrique des produits (GPS)
1/12/2002 - Papel - Francés - AFNOR
Más información75,67 € -
JIS B 7440-1:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary
20/3/2003 - PDF - Japonés - JSA
Más información41,86 € -
JIS B 7440-3:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMM's with the axis of a rotary table as the fourth axis
20/3/2003 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 7440-4:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
20/3/2003 - PDF - Japonés - JSA
Más información25,00 € -
DIN 254:2003-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles, Values for setting taper angles and setting heights
1/4/2003 - PDF - Alemán - DIN
Más información52,90 € -
DIN 254:2003-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles
1/4/2003 - PDF - Inglés - DIN
Más información66,07 € -
DIN 2299-1:2003-04
Geometrical Product Specification (GPS) - NOT GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, General purposes
1/4/2003 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2299-1:2003-04
NOT GO screw ring gauges for general purpose ISO metric screw threads with nominal diameter from 1 mm to 200 mm
1/4/2003 - PDF - Inglés - DIN
Más información40,56 € -
DIN EN ISO 10360-1:2003-07
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002), German version EN ISO 10360-1:2000 + AC:2002
1/7/2003 - PDF - Alemán - DIN
Más información99,35 € -
JIS B 0031:2003 (R2013)
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
20/9/2003 - PDF - Japonés - JSA
Más información52,91 € -
NF E11-018 (10/2003)
Geometrical product specification (GPS) - Calibration specimens - Plugs with grooves - Spécification géométrique des produits (GPS)
1/10/2003 - Papel - Francés - AFNOR
Más información99,33 € -
DIN 874-1:2003-11
Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges, Dimensions, technical delivery conditions
1/11/2003 - PDF - Alemán - DIN
Más información45,98 € -
DIN 874-1:2003-11
Straightedges - Part 1: Steel straight edges - Dimensions and technical delivery conditions
1/11/2003 - PDF - Inglés - DIN
Más información57,57 € -
DIN 874-2:2003-11
Geometrical Product Specifications (GPS) - Straight edges - Part 2: Knife edge straight edges, Dimensions, technical delivery conditions
1/11/2003 - PDF - Alemán - DIN
Más información32,34 € -
DIN 874-2:2003-11
Straightedges - Part 2: Knife-edge straightedges - Dimensions and technical delivery conditions
1/11/2003 - PDF - Inglés - DIN
Más información40,56 € -
BS EN 61108-1:2003
Global navigation satellite systems (GNSS) positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
14/11/2003 - PDF - Inglés - BSI
Más información250,00 € -
XP E03-110 (12/2003)
Geometrical product specification (GPS) - Screw threads - Direct measuring methods - Spécification géométrique des produits (GPS)
1/12/2003 - Papel - Francés - AFNOR
Más información144,67 € -
DIN EN ISO 1 Beiblatt 1:2004-02
Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 16015:2003)
1/2/2004 - PDF - Alemán - DIN
Más información115,33 € -
NF E11-200 (03/2004) (R2009)
Geometrical product specification (GPS) - Measuring instruments in use - Use classes - Spécification géométrique des produits (GPS)
1/3/2004 - Papel - Francés - AFNOR
Más información75,67 € -
JIS B 7440-6:2004 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
20/3/2004 - PDF - Japonés - JSA
Más información36,27 € -
46,02 €
-
BS EN 61108-4:2004
Marine navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Shipborne DGPS DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing required test results
13/12/2004 - PDF - Inglés - BSI
Más información293,00 € -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
17/12/2004 - PDF - Español - AENOR
Más información0,00 € -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
17/12/2004 - PDF - Inglés - AENOR
Más información0,00 € -
JIS B 1509:2005 (R2014)
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
20/3/2005 - PDF - Japonés - JSA
Más información25,00 € -
DIN 875-1:2005-07
Geometrical Product Specifications (GPS) - Squares 90° - Part 1: Steel squares 90°
1/7/2005 - PDF - Alemán - DIN
Más información52,90 € -
DIN EN ISO 463:2006-06
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006), German version EN ISO 463:2006
1/6/2006 - PDF - Alemán - DIN
Más información79,72 € -
DIN EN ISO 463:2006-06
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006), German version EN ISO 463:2006
1/6/2006 - PDF - Inglés - DIN
Más información99,44 € -
NF EN ISO 463, E11-050 (06/2006)
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges - Spécification géométrique des produits (GPS)
1/6/2006 - Papel - Francés - AFNOR
Más información75,50 € -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
20/9/2006 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
20/9/2006 - PDF - Inglés - AENOR
Más información81,60 € -
DIN 866:2006-12
Geometrical product specifications (GPS) - Graduated rules, rules for manufacturing purposes - Design, requirements
1/12/2006 - PDF - Alemán - DIN
Más información52,90 € -
DIN 2253:2006-12
Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size
1/12/2006 - PDF - Alemán - DIN
Más información45,98 € -
DIN 2239:2006-12
Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
1/12/2006 - PDF - Alemán - DIN
Más información45,98 € -
XP ISO/TS 23165, E11-170 (12/2006)
Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty - Spécification géométrique des produits (GPS)
1/12/2006 - Papel - Francés - AFNOR
Más información99,33 € -
JIS B 0680:2007 (R2016)
Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification
20/3/2007 - PDF - Japonés - JSA
Más información25,00 € -
NF EN ISO 8062-1, A00-510-1 (08/2007)
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary - Spécification géométrique des produits (GPS)
1/8/2007 - Papel - Inglés, Francés - AFNOR
Más información78,50 € -
DD ISO/TS 23165:2006
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
28/9/2007 - PDF - Inglés - BSI
Más información293,00 € -
BS EN ISO 8062-1:2007
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Vocabulary
31/10/2007 - PDF - Inglés - BSI
Más información293,00 € -
FD ISO/TR 16015, E10-001 (11/2007)
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences - Spécification géométrique des produits (GPS)
1/11/2007 - Papel - Francés - AFNOR
Más información108,00 € -
DIN EN ISO 8062-1:2008-01
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007), Trilingual version EN ISO 8062-1:2007
1/1/2008 - PDF - Inglés, Francés, Alemán - DIN
Más información104,95 € -
DIN 874-3:2008-01
Geometrical product specifications (GPS) - Straight edges - Part 3: Granite straight edges, dimensions, technical delivery conditions
1/1/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 875-2:2008-01
Geometrical product specifications (GPS) - Squares 90° - Part 2: Granite squares 90°
1/1/2008 - PDF - Alemán - DIN
Más información32,34 € -
JIS B 1536-1:2008 (R2013)
Rolling bearings - Boundary dimensions and tolerances of needle roller bearings - Part 1: Dimension series 48, 49 and 69
20/4/2008 - PDF - Japonés - JSA
Más información25,00 € -
DIN 2231:2008-07
Geometrical product specifications (GPS) - Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2232:2008-07
Geometrical product specifications (GPS) - Gap gauges "GO" with forged gauging member over 3 mm up to 100 mm nominal size
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2233:2008-07
Geometrical product specifications (GPS) - Gap gauges "NOT GO" with forged gauging member over 3 mm up to 100 mm nominal size
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2245-1:2008-07
Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2245-2:2008-07
Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2246-1:2008-07
Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2246-2:2008-07
Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información22,99 € -
DIN 2246-3:2008-07
Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información22,99 € -
DIN 2247-1:2008-07
Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2247-2:2008-07
Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 2: With rod gauge for holes over 40 mm up to 500 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2247-3:2008-07
Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2247-4:2008-07
Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 4: With segmental cylindrical gauging member over 120 mm up to 200 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información22,99 € -
DIN 2248-2:2008-07
Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2248-3:2008-07
Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2249-2:2008-07
Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2249-3:2008-07
Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 3: Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2249-4:2008-07
Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 4: Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter
1/7/2008 - PDF - Alemán - DIN
Más información32,34 € -
DIN 2285-1:2008-07
Geometrical product specifications (GPS) - "GO" screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose
1/7/2008 - PDF - Alemán - DIN
Más información45,98 € -
DIN 2285-1:2008-07
Geometrical product specifications (GPS) - GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameters from 1 mm up to 200 mm for general purposes
1/7/2008 - PDF - Inglés - DIN
Más información57,57 € -
DIN 2259:2008-07
Geometrical product specifications (GPS) - Gauges for cylindrical fits and fits of plan surfaces - Survey, inscription, marking
1/7/2008 - PDF - Alemán - DIN
Más información65,89 € -
XP ISO/TS 15530-4, E11-158-4 (07/2008)
Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement - Part 4 : Evaluating task-specific measurement uncertainty using simulation - Spécification géométrique des produits (GPS)
1/7/2008 - Papel - Francés - AFNOR
Más información86,67 € -
BS EN ISO 10360-6:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
31/7/2008 - PDF - Inglés - BSI
Más información250,00 € -
DIN ISO/TS 23165:2008-08
Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
1/8/2008 - PDF - Alemán - DIN
Más información110,00 € -
DIN 2250-1:2008-10
Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter
1/10/2008 - PDF - Alemán - DIN
Más información52,90 € -
DIN 2250-1:2008-10
Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter
1/10/2008 - PDF - Inglés - DIN
Más información66,07 € -
DD ISO/TS 15530-4:2008
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Evaluating task-specific measurement uncertainty using simulation
30/11/2008 - PDF - Inglés - BSI
Más información293,00 € -
DIN EN ISO 10360-6:2009-01
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007), German version EN ISO 10360-6:2001+AC:2007
1/1/2009 - PDF - Alemán - DIN
Más información85,79 € -
DIN EN ISO 10360-6:2009-01
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007), German version EN ISO 10360-6:2001+AC:2007
1/1/2009 - PDF - Inglés - DIN
Más información107,48 € -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
4/3/2009 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
4/3/2009 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
29/4/2009 - PDF - Español - AENOR
Más información0,00 € -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
29/4/2009 - PDF - Inglés - AENOR
Más información0,00 € -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
29/4/2009 - PDF - Español - AENOR
Más información0,00 € -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
29/4/2009 - PDF - Inglés - AENOR
Más información0,00 € -
BS EN ISO 10135:2009
Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
31/5/2009 - PDF - Inglés - BSI
Más información348,00 € -
DIN EN ISO 463 Berichtigung 1:2009-07
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006), German version EN ISO 463:2006, Corrigendum to DIN EN ISO 463:2006-06, German version EN ISO 463:2006/AC:2009
1/7/2009 - PDF - Alemán - DIN
Más información0,00 € -
DIN EN ISO 463 Berichtigung 1:2009-07
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006), German version EN ISO 463:2006, Corrigendum to DIN EN ISO 463:2006-06, German version EN ISO 463:2006/AC:2009
1/7/2009 - PDF - Inglés - DIN
Más información0,00 € -
BS EN ISO 12085:1997
Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters
31/7/2009 - PDF - Inglés - BSI
Más información180,00 € -
DIN EN ISO 12085 Berichtigung 1:2009-09
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996), German version EN ISO 12085:1997, Corrigendum to DIN EN ISO 12085:1998-05, German version EN ISO 12085:1997/AC:2008
1/9/2009 - PDF - Alemán - DIN
Más información0,00 € -
DIN EN ISO 12085 Berichtigung 1:2009-09
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996), German version EN ISO 12085:1997, Corrigendum to DIN EN ISO 12085:1998-05, German version EN ISO 12085:1997/AC:2008
1/9/2009 - PDF - Inglés - DIN
Más información0,00 € -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
18/11/2009 - PDF - Español - AENOR
Más información104,00 € -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
18/11/2009 - PDF - Inglés - AENOR
Más información124,80 € -
NF EN ISO 10360-2, E11-150-2 (01/2010)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions - Spécification géométrique des produits (GPS)
1/1/2010 - Papel - Francés - AFNOR
Más información99,00 € -
BS EN ISO 10360-2:2009
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used for measuring linear dimensions
31/1/2010 - PDF - Inglés - BSI
Más información293,00 € -
DIN EN ISO 10135:2010-02
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007), German version EN ISO 10135:2009
1/2/2010 - PDF - Alemán - DIN
Más información141,96 € -
DIN EN ISO 10135:2010-02
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007), German version EN ISO 10135:2009
1/2/2010 - PDF - Inglés - DIN
Más información177,38 € -
NF EN ISO 25178-6, E05-031-6 (05/2010)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 6 : classification of methods for measuring surface texture - Spécification géométrique des produits (GPS)
1/5/2010 - Papel - Francés - AFNOR
Más información58,33 € -
BS EN ISO 25178-6:2010
Geometrical product specifications (GPS). Surface texture. Areal. Classification of methods for measuring surface texture
31/5/2010 - PDF - Inglés - BSI
Más información180,00 € -
DIN EN ISO 10360-2:2010-06
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009), German version EN ISO 10360-2:2009
1/6/2010 - PDF - Alemán - DIN
Más información104,95 € -
DIN EN ISO 10360-2:2010-06
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009), German version EN ISO 10360-2:2009
1/6/2010 - PDF - Inglés - DIN
Más información131,40 € -
DIN EN ISO 25178-6:2010-06
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010), German version EN ISO 25178-6:2010
1/6/2010 - PDF - Alemán - DIN
Más información72,80 € -
DIN EN ISO 25178-6:2010-06
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010), German version EN ISO 25178-6:2010
1/6/2010 - PDF - Inglés - DIN
Más información91,12 € -
DD CEN ISO/TS 14253-4:2010
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Background on functional limits and specification limits in decision rules
30/6/2010 - PDF - Inglés - BSI
Más información250,00 € -
XP CEN ISO/TS 14253-4, E10-201-4 (07/2010)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4 : Background on functional limits and specification limits in decision rules - Spécification géométrique des produits (GPS)
1/7/2010 - Papel - Francés - AFNOR
Más información75,67 € -
BS EN ISO 25178-601:2010
Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of contact (stylus) instruments
31/7/2010 - PDF - Inglés - BSI
Más información250,00 € -
BS EN ISO 25178-602:2010
Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of non-contact (confocal chromatic probe) instruments
31/7/2010 - PDF - Inglés - BSI
Más información293,00 € -
BS EN ISO 25178-701:2010
Geometrical product specifications (GPS). Surface texture. Areal. Calibration and measurement standards for contact (stylus) instruments
31/7/2010 - PDF - Inglés - BSI
Más información293,00 € -
NF EN ISO 25178-602, E05-031-602 (08/2010)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments - Spécification géométrique des produits (GPS)
1/8/2010 - Papel - Francés - AFNOR
Más información99,33 €