Especificación geométrica de productos (GPS)
La especificación geométrica del producto (GPS) es un método estándar que tiene como objetivo definir para una pieza lo que es admisible para que sus características geométricas y funcionales sean buenas. Estas especificaciones pueden dar forma, dimensiones, acabado superficial, etc. de esta habitación.
¡El código ICS 17.040.40 agrupa todos los estándares sobre el tema!
|
|
Para que industrias :
- Automotor
- Aeronáutica
- Ferrocarril
Encuentra nuestra selección :
|
|
-
NF EN ISO 8062-3, A00-510-3 (03/2023)
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : General dimensional and geometrical tolerances and machining allowances for castings
1/3/2023 - Papel - Francés - AFNOR
Más información96,00 € -
NF EN ISO 25178-700, E05-031-700 (01/2023)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 700 : Calibration, adjustment and verification of areal topography measuring instruments
1/1/2023 - Papel - Francés - AFNOR
Más información96,00 € -
NF E04-007 (12/2022)
Geometrical product specifications (GPS) - Discrete modal decomposition - Analysis method
1/12/2022 - Papel - Francés - AFNOR
Más información104,67 € -
NF EN ISO 12179, E05-056 (01/2022)
Geometrical product specifications (GPS) - Surface texture : Profile method - Calibration of contact (stylus) instruments
1/1/2022 - Papel - Francés - AFNOR
Más información73,00 € -
NF EN ISO 25178-2, E05-031-2 (01/2022)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 2 : Terms, definitions and surface texture parameters
1/1/2022 - Papel - Francés - AFNOR
Más información140,00 € -
NF EN ISO 21920-1, E05-016-1 (01/2022)
Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture
1/1/2022 - Papel - Francés - AFNOR
Más información115,00 € -
NF EN ISO 21920-2, E05-016-2 (01/2022)
Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters
1/1/2022 - Papel - Francés - AFNOR
Más información149,33 € -
NF EN ISO 21920-3, E05-016-3 (01/2022)
Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators
1/1/2022 - Papel - Francés - AFNOR
Más información96,00 € -
NF E10-100-1 (10/2021)
Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement - Spécification géométrique des produits (GPS)
1/10/2021 - Papel - Francés - AFNOR
Más información83,67 € -
NF EN ISO 10360-13, E11-150-13 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13 : Optical 3D CMS
1/9/2021 - Papel - Francés - AFNOR
Más información126,33 € -
NF EN ISO 10360-10, E11-150-10 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 : laser trackers for measuring point-to-point distances
1/9/2021 - Papel - Francés - AFNOR
Más información115,00 € -
26,54 €
-
NF EN ISO 2692, E04-555 (06/2021)
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
1/6/2021 - Papel - Francés - AFNOR
Más información126,00 € -
21/30423738 DC:2021
BS ISO 199. Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
25/5/2021 - PDF - Inglés - BSI
Más información24,00 € -
21/30378338 DC:2021
BS ENISO 10360-11. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Part 11. CMSs using the principle of X-ray computed tomography (CT)
8/4/2021 - PDF - Inglés - BSI
Más información24,00 € -
NBN EN ISO 22081:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
24/3/2021 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 22081:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
24/3/2021 - PDF - Inglés - NBN
Más información89,00 € -
BS EN ISO 22081:2021
Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
22/2/2021 - PDF - Inglés - BSI
Más información238,00 € -
NF EN ISO 22081, E04-574 (02/2021)
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Spécifications géométriques et dimensionnelles générales
1/2/2021 - Papel - Francés - AFNOR
Más información73,00 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27/1/2021 - PDF - Español - AENOR
Más información93,00 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27/1/2021 - PDF - Inglés - AENOR
Más información111,60 € -
DIN EN ISO 25178-72:2021-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017 + Amd 1:2020), German version EN ISO 25178-72:2017 + A1:2020
1/1/2021 - PDF - Alemán - DIN
Más información100,93 € -
DIN EN ISO 10360-5:2020-11
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020), German version EN ISO 10360-5:2020
1/11/2020 - PDF - Alemán - DIN
Más información126,92 € -
BS EN ISO 25178-72:2017+A1:2020
Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
1/10/2020 - PDF - Inglés - BSI
Más información278,00 € -
NF EN ISO 25178-72/A1, E05-031-72/A1 (09/2020)
Geometrical product specifications (GPS) - Surface texture : areal - Part 72 : XML file format x3p - Amendment 1 - Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 72 : Format de fichier XML x3p AMENDEMENT 1
1/9/2020 - Papel - Francés - AFNOR
Más información58,33 € -
DIN EN ISO 13385-2:2020-09
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020), German and English version EN ISO 13385-2:2020
1/9/2020 - PDF - Inglés, Alemán - DIN
Más información82,52 € -
PD ISO/TR 23276:2020
Geometrical product specifications (GPS). Surface texture: Profile method. Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
24/8/2020 - PDF - Inglés - BSI
Más información170,00 € -
UNE-EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
1/8/2020 - PDF - Inglés - AENOR
Más información68,00 € -
DIN EN ISO 16610-29:2020-07
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020), German version EN ISO 16610-29:2020
1/7/2020 - PDF - Alemán - DIN
Más información89,07 € -
UNE-EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
1/7/2020 - PDF - Inglés - AENOR
Más información94,00 € -
UNE-EN ISO 16610-29:2020
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
1/7/2020 - PDF - Inglés - AENOR
Más información72,00 € -
BS EN ISO 13385-2:2020 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
3/6/2020 - PDF - Inglés - BSI
Más información223,00 € -
BS EN ISO 13385-2:2020
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
1/6/2020 - PDF - Inglés - BSI
Más información170,00 € -
NF EN ISO 13385-2, E11-085-2 (05/2020)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : Jauges de profondeur , caractéristiques de conception et caractéristiques métrologiques
1/5/2020 - Papel - Francés - AFNOR
Más información73,00 € -
DIN EN ISO 16610-61:2020-05
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters: Gaussian filters (ISO 16610-61:2015 + Amd 1:2019), German version EN ISO 16610-61:2015 + A1:2020
1/5/2020 - PDF - Alemán - DIN
Más información100,93 € -
UNE-EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información72,00 € -
UNE-EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información72,00 € -
UNE-EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información72,00 € -
UNE-EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información65,00 € -
UNE-EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
1/5/2020 - PDF - Inglés - AENOR
Más información69,00 € -
BS EN ISO 16610-29:2020
Geometrical product specifications (GPS). Filtration Linear profile filters: Wavelets
28/4/2020 - PDF - Inglés - BSI
Más información238,00 € -
BS EN ISO 10360-5:2020
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
21/4/2020 - PDF - Inglés - BSI
Más información331,00 € -
NF EN ISO 10360-5, E11-150-5 (04/2020)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnelles (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisant un mode de mesurage par point discret et/ou par scan
1/4/2020 - Papel - Francés - AFNOR
Más información115,00 € -
NF EN ISO 16610-29, E05-040-29 (04/2020)
Geometrical product specifications (GPS) - Filtration - Part 29 : linear profile filters : wavelets - Spécification géométrique des produits (GPS) - Filtrage - Partie 29 : Filtres de profil linéaires : Ondelettes splines
1/4/2020 - Papel - Francés - AFNOR
Más información73,00 € -
BS EN ISO 16610-61:2015+A1:2020
Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
11/3/2020 - PDF - Inglés - BSI
Más información238,00 € -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
4/3/2020 - PDF - Español - AENOR
Más información71,00 € -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
4/3/2020 - PDF - Inglés - AENOR
Más información85,20 € -
DIN EN ISO 13385-1:2020-03
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019), German version EN ISO 13385-1:2019
1/3/2020 - PDF - Alemán - DIN
Más información82,52 € -
BS EN ISO 25178-71:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
27/2/2020 - PDF - Inglés - BSI
Más información223,00 € -
BS ISO 464:2015 + Redline
Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
27/2/2020 - PDF - Inglés - BSI
Más información310,00 € -
NBN EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
27/2/2020 - PDF - Francés - NBN
Más información20,00 € -
NBN EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
27/2/2020 - PDF - Alemán - NBN
Más información20,00 € -
NBN EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
27/2/2020 - PDF - Inglés - NBN
Más información20,00 € -
BS EN ISO 17450-3:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts Toleranced features
26/2/2020 - PDF - Inglés - BSI
Más información310,00 € -
BS EN ISO 3040:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
26/2/2020 - PDF - Inglés - BSI
Más información362,00 € -
BS EN ISO 14405-1:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
25/2/2020 - PDF - Inglés - BSI
Más información432,00 € -
BS EN ISO 14405-2:2019 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
24/2/2020 - PDF - Inglés - BSI
Más información310,00 € -
BS EN ISO 1101:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
24/2/2020 - PDF - Inglés - BSI
Más información557,00 € -
BS EN ISO 14253-1:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
24/2/2020 - PDF - Inglés - BSI
Más información310,00 € -
NF ISO 9628, E22-304 (02/2020)
Rolling bearings - Insert bearings and eccentric locking collars - Geometrical product specifications (GPS) and tolerance values
1/2/2020 - Papel - Francés - AFNOR
Más información83,50 € -
UNE-EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
1/2/2020 - PDF - Inglés - AENOR
Más información15,00 € -
BS EN ISO 5458:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
29/1/2020 - PDF - Inglés - BSI
Más información432,00 € -
NF EN ISO 16610-61/A1, E05-040-61/A1 (01/2020)
Geometrical product specification (GPS) - Filtration - Part 61 : linear areal filters - Gaussian filters - Amendment 1
1/1/2020 - Papel - Francés - AFNOR
Más información25,00 € -
NF E11-015 (12/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
1/12/2019 - Papel - Francés - AFNOR
Más información46,50 € -
BS EN ISO 14978:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
27/11/2019 - PDF - Inglés - BSI
Más información432,00 € -
DIN EN ISO 20170:2019-11
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019), German version EN ISO 20170:2019
1/11/2019 - PDF - Alemán - DIN
Más información89,07 € -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/10/2019 - PDF - Español - AENOR
Más información70,00 € -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/10/2019 - PDF - Inglés - AENOR
Más información84,00 € -
DIN EN ISO 25178-73:2019-10
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019), German version EN ISO 25178-73:2019
1/10/2019 - PDF - Alemán - DIN
Más información70,00 € -
BS EN ISO 13385-1:2019
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
24/9/2019 - PDF - Inglés - BSI
Más información238,00 € -
DIN EN ISO 286-1:2019-09
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013), German version EN ISO 286-1:2010 + AC:2013
1/9/2019 - PDF - Alemán - DIN
Más información110,93 € -
DIN EN ISO 286-2:2019-09
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013), German version EN ISO 286-2:2010 + AC:2013
1/9/2019 - PDF - Alemán - DIN
Más información126,92 € -
NF EN ISO 13385-1, E11-085-1 (09/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : Pieds à coulisse, caractéristiques de conception et caractéristiques métrologiques
1/9/2019 - Papel - Francés - AFNOR
Más información73,00 € -
NBN EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
24/7/2019 - PDF - Francés - NBN
Más información58,00 € -
NBN EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
24/7/2019 - PDF - Alemán - NBN
Más información58,00 € -
NBN EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
24/7/2019 - PDF - Inglés - NBN
Más información58,00 € -
NBN EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
26/6/2019 - PDF - Francés - NBN
Más información121,00 € -
NBN EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
26/6/2019 - PDF - Inglés - NBN
Más información121,00 € -
BS EN ISO 25178-73:2019
Geometrical product specifications (GPS). Surface texture: Areal Terms and definitions for surface defects on material measures
18/6/2019 - PDF - Inglés - BSI
Más información170,00 € -
DIN EN ISO 14978:2019-06
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018), German version EN ISO 14978:2018
1/6/2019 - PDF - Alemán - DIN
Más información121,40 € -
NF EN ISO 25178-73, E05-031-73 (06/2019)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures - Spécification géométrique des produits (GPS) - État de surface : surfacique Partie 73 : Mesures matérialisées - Termes et définitions pour défauts de surface
1/6/2019 - Papel - Francés - AFNOR
Más información46,50 € -
DIN EN ISO 14405-2:2019-06
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018), German version EN ISO 14405-2:2019
1/6/2019 - PDF - Alemán - DIN
Más información89,07 € -
BS EN ISO 20170:2019
Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
22/5/2019 - PDF - Inglés - BSI
Más información238,00 € -
143,00 €
-
143,00 €
-
NF EN ISO 25178-607, E05-031-607 (04/2019)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 607 : nominal characteristics of non-contact (confocal microscopy) instruments
1/4/2019 - Papel - Francés - AFNOR
Más información83,50 € -
NF EN ISO 25178-600, E05-031-600 (04/2019)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 600 : metrological characteristics for areal-topography measuring methods
1/4/2019 - Papel - Francés - AFNOR
Más información83,67 € -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
27/3/2019 - PDF - Español - AENOR
Más información65,00 € -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
27/3/2019 - PDF - Inglés - AENOR
Más información78,00 € -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
27/3/2019 - PDF - Español - AENOR
Más información70,00 € -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
27/3/2019 - PDF - Inglés - AENOR
Más información84,00 € -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
27/3/2019 - PDF - Español - AENOR
Más información65,00 € -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
27/3/2019 - PDF - Inglés - AENOR
Más información78,00 € -
BS EN ISO 14978:2018
Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
21/3/2019 - PDF - Inglés - BSI
Más información331,00 € -
JIS B 0024:2019
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
20/2/2019 - PDF - Japonés - JSA
Más información25,00 € -
BS EN ISO 14405-2:2019
Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
28/1/2019 - PDF - Inglés - BSI
Más información238,00 € -
NF EN ISO 14405-2, E04-563-2 (01/2019)
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear or angular sizes
1/1/2019 - Papel - Francés - AFNOR
Más información83,67 € -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
5/12/2018 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
5/12/2018 - PDF - Inglés - AENOR
Más información81,60 € -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
5/12/2018 - PDF - Español - AENOR
Más información65,00 € -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
5/12/2018 - PDF - Inglés - AENOR
Más información78,00 € -
NF EN ISO 14978, E11-001 (12/2018)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
1/12/2018 - Papel - Francés - AFNOR
Más información115,00 € -
DIN EN ISO 5458:2018-11
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018), German version EN ISO 5458:2018
1/11/2018 - PDF - Alemán - DIN
Más información121,40 € -
DIN EN ISO 5458:2018-11
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018), German version EN ISO 5458:2018
1/11/2018 - PDF - Inglés - DIN
Más información151,59 € -
XP E10-100-2 (10/2018)
Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations
1/10/2018 - Papel - Francés - AFNOR
Más información149,50 € -
DIN EN ISO 14253-2:2018-09
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011), German version EN ISO 14253-2:2011
1/9/2018 - PDF - Alemán - DIN
Más información167,66 € -
DIN EN ISO 15530-3:2018-09
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011), German version EN 15530-3:2011
1/9/2018 - PDF - Alemán - DIN
Más información82,52 € -
DIN 878:2018-07
Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for measurement errors
1/7/2018 - PDF - Alemán - DIN
Más información31,12 € -
DIN 2241:2018-07
Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads, setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
1/7/2018 - PDF - Alemán - DIN
Más información50,84 € -
DIN EN ISO 14253-1:2018-07
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017), German version EN ISO 14253-1:2017
1/7/2018 - PDF - Alemán - DIN
Más información89,07 € -
BS EN ISO 5458:2018
Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
11/6/2018 - PDF - Inglés - BSI
Más información331,00 € -
NF EN ISO 5458, E04-559 (06/2018)
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Partie 2 : tolérancement de position et de motif
1/6/2018 - Papel - Francés - AFNOR
Más información104,67 € -
DIN EN ISO 17450-4:2018-05
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017), German version EN ISO 17450-4:2018
1/5/2018 - PDF - Alemán - DIN
Más información76,64 € -
DIN EN ISO 17450-4:2018-05
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017), German version EN ISO 17450-4:2018
1/5/2018 - PDF - Inglés - DIN
Más información95,61 € -
PD ISO/TS 21619:2018
Geometrical product specifications (GPS). Types of documents with GPS
17/4/2018 - PDF - Inglés - BSI
Más información170,00 € -
70,00 €
-
UNE-EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
1/3/2018 - PDF - Inglés - AENOR
Más información60,00 € -
NBN EN ISO 17450-4:2018
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
28/2/2018 - PDF - Francés - NBN
Más información89,00 € -
NBN EN ISO 17450-4:2018
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
28/2/2018 - PDF - Alemán - NBN
Más información89,00 € -
NBN EN ISO 17450-4:2018
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
28/2/2018 - PDF - Inglés - NBN
Más información89,00 € -
BS EN ISO 17450-4:2018
Geometrical product specifications (GPS). Basic concepts characteristics for quantifying GPS deviations
20/2/2018 - PDF - Inglés - BSI
Más información238,00 € -
BS EN ISO 14253-1:2017
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
7/2/2018 - PDF - Inglés - BSI
Más información238,00 € -
NBN EN ISO 14253-1:2018
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
30/1/2018 - PDF - Francés - NBN
Más información121,00 € -
NBN EN ISO 14253-1:2018
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
30/1/2018 - PDF - Inglés - NBN
Más información121,00 € -
0,00 €
-
DIN EN ISO 25178-71:2018-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017), German version EN ISO 25178-71:2017
1/1/2018 - PDF - Inglés - DIN
Más información95,61 € -
DIN EN ISO 25178-71:2018-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017), German version EN ISO 25178-71:2017
1/1/2018 - PDF - Alemán - DIN
Más información76,64 € -
NF EN ISO 17450-4, E04-001-4 (01/2018)
Geometrical product specifications (GPS) - Basic concepts - Part 4 : Geometrical characteristics for quantifying GPS deviations - Spécification géométrique des produits (GPS) - Concepts généraux - Partie 4 : Caractéristiques géométriques pour la quantification des écarts de forme, d'orientation, de position et de battement
1/1/2018 - Papel - Francés - AFNOR
Más información73,00 € -
106,00 €
-
106,00 €
-
NF EN ISO 14253-1, E10-201-1 (12/2017)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications - Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : Règles de décision pour contrôler la conformité ou la non - conformité à la spécification
1/12/2017 - Papel - Francés - AFNOR
Más información83,50 € -
NBN EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
22/11/2017 - PDF - Francés - NBN
Más información58,00 € -
NBN EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
22/11/2017 - PDF - Alemán - NBN
Más información58,00 € -
NBN EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
22/11/2017 - PDF - Inglés - NBN
Más información58,00 € -
143,00 €
-
143,00 €
-
BS EN ISO 25178-71:2017
Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
23/10/2017 - PDF - Inglés - BSI
Más información170,00 € -
NF EN ISO 25178-71, E05-031-71 (10/2017)
Geometrical product specifications (GPS) - Surface texture : areal - Part 71 : software measurement standards - Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 71 : Étalons logiciels
1/10/2017 - Papel - Francés - AFNOR
Más información73,00 € -
JIS B 1514-2:2017
Rolling bearings - Geometrical product specifications (GPS) and tolerance values - Part 2: Thrust bearings
20/9/2017 - PDF - Japonés - JSA
Más información36,27 € -
DIN EN ISO 1660:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017), German version EN ISO 1660:2017
1/9/2017 - PDF - Alemán - DIN
Más información121,40 € -
DIN EN ISO 1660:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017), German version EN ISO 1660:2017
1/9/2017 - PDF - Inglés - DIN
Más información151,59 € -
DIN EN ISO 1101:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017), German version EN ISO 1101:2017
1/9/2017 - PDF - Inglés - DIN
Más información281,31 € -
DIN EN ISO 1101:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017), German version EN ISO 1101:2017
1/9/2017 - PDF - Alemán - DIN
Más información225,05 € -
NF EN ISO 25178-72, E05-031-72 (08/2017)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 72 : XML file format x3p
1/8/2017 - Papel - Francés - AFNOR
Más información83,50 € -
JIS B 0615-1:2017
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
20/7/2017 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0615-2:2017
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
20/7/2017 - PDF - Japonés - JSA
Más información25,00 € -
DIN EN ISO 14405-3:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016), German version EN ISO 14405-3:2017
1/7/2017 - PDF - Alemán - DIN
Más información95,51 € -
DIN EN ISO 14405-3:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016), German version EN ISO 14405-3:2017
1/7/2017 - PDF - Inglés - DIN
Más información119,44 € -
DIN EN ISO 14405-1:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016), German version EN ISO 14405-1:2016
1/7/2017 - PDF - Inglés - DIN
Más información170,56 € -
DIN EN ISO 14405-1:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016), German version EN ISO 14405-1:2016
1/7/2017 - PDF - Alemán - DIN
Más información136,54 € -
UNE-EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
1/7/2017 - PDF - Inglés - AENOR
Más información69,00 € -
17/30358444 DC:2017
BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing Part 2. Dimensions other than linear sizes
16/6/2017 - PDF - Inglés - BSI
Más información24,00 € -
JIS B 0612:2017
Geometrical product specifications (GPS) - Series of conical tapers and taper angles
22/5/2017 - PDF - Japonés - JSA
Más información25,00 € -
DIN EN ISO 1938-2:2017-05
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017), German version EN ISO 1938-2:2017
1/5/2017 - PDF - Inglés - DIN
Más información87,57 € -
DIN EN ISO 1938-2:2017-05
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017), German version EN ISO 1938-2:2017
1/5/2017 - PDF - Alemán - DIN
Más información70,00 € -
UNE-EN ISO 18391:2016
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
1/5/2017 - PDF - Inglés - AENOR
Más información65,00 € -
BS EN ISO 16610-30:2017
Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
30/4/2017 - PDF - Inglés - BSI
Más información238,00 € -
DIN EN ISO 16610-28:2017-04
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016), German version EN ISO 16610-28:2016
1/4/2017 - PDF - Alemán - DIN
Más información82,52 € -
DIN EN ISO 16610-30:2017-04
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015), German version EN ISO 16610-30:2017
1/4/2017 - PDF - Alemán - DIN
Más información76,64 € -
DIN EN ISO 16610-28:2017-04
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016), German version EN ISO 16610-28:2016
1/4/2017 - PDF - Inglés - DIN
Más información103,36 € -
DIN EN ISO 16610-30:2017-04
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015), German version EN ISO 16610-30:2017
1/4/2017 - PDF - Inglés - DIN
Más información95,61 € -
NF EN ISO 1101, E04-552 (04/2017)
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
1/4/2017 - Papel - Francés - AFNOR
Más información191,67 € -
NF EN ISO 9013, A87-000 (04/2017)
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
1/4/2017 - Papel - Francés - AFNOR
Más información96,00 € -
NF EN ISO 16610-30, E05-040-30 (04/2017)
Geometrical product specifications (GPS) - Filtration - Part 30 : robust profile filters : basic concepts
1/4/2017 - Papel - Francés - AFNOR
Más información73,00 € -
NF EN ISO 1938-2, E02-200-2 (04/2017)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
1/4/2017 - Papel - Francés - AFNOR
Más información58,50 € -
NF EN ISO 1660, E04-556 (04/2017)
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing - Spécification géométrique des produits (GPS)
1/4/2017 - Papel - Francés - AFNOR
Más información115,00 € -
UNE-EN ISO 1101:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
1/4/2017 - PDF - Inglés - AENOR
Más información168,00 € -
UNE-EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
1/4/2017 - PDF - Inglés - AENOR
Más información87,00 € -
NBN EN ISO 1101:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
22/3/2017 - PDF - Francés - NBN
Más información205,00 € -
NBN EN ISO 1101:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
22/3/2017 - PDF - Alemán - NBN
Más información205,00 € -
NBN EN ISO 1101:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
22/3/2017 - PDF - Inglés - NBN
Más información205,00 € -
NBN EN ISO 1938-2:2017
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
22/3/2017 - PDF - Francés - NBN
Más información58,00 € -
NBN EN ISO 1938-2:2017
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
22/3/2017 - PDF - Inglés - NBN
Más información58,00 € -
NBN EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
22/3/2017 - PDF - Francés - NBN
Más información163,00 € -
NBN EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
22/3/2017 - PDF - Alemán - NBN
Más información163,00 € -
NBN EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
22/3/2017 - PDF - Inglés - NBN
Más información163,00 € -
DIN EN ISO 18391:2017-03
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016), German version EN ISO 18391:2016
1/3/2017 - PDF - Alemán - DIN
Más información82,52 € -
DIN EN ISO 16610-31:2017-03
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016), German version EN ISO 16610-31:2016
1/3/2017 - PDF - Alemán - DIN
Más información70,00 € -
DIN EN ISO 18391:2017-03
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016), German version EN ISO 18391:2016
1/3/2017 - PDF - Inglés - DIN
Más información103,36 € -
DIN EN ISO 16610-31:2017-03
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016), German version EN ISO 16610-31:2016
1/3/2017 - PDF - Inglés - DIN
Más información87,57 € -
DIN 7163:2017-03
Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and tolerances
1/3/2017 - PDF - Alemán - DIN
Más información116,17 € -
DIN 7164:2017-03
Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
1/3/2017 - PDF - Alemán - DIN
Más información142,34 € -
NF EN ISO 14405-3, E04-563-3 (03/2017)
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes - Spécification géométrique des produits (GPS)
1/3/2017 - Papel - Francés - AFNOR
Más información83,50 € -
NF EN ISO 16610-28, E05-040-28 (03/2017)
Geometrical product specifications (GPS) - Filtration - Part 28 : profile filters : end effects
1/3/2017 - Papel - Francés - AFNOR
Más información73,00 € -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
1/3/2017 - PDF - Español - AENOR
Más información68,00 € -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
1/3/2017 - PDF - Inglés - AENOR
Más información81,60 € -
BS EN ISO 9013:2017
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
28/2/2017 - PDF - Inglés - BSI
Más información278,00 € -
BS EN ISO 1938-2:2017
Geometrical product specifications (GPS). Dimensional measuring equipment. Reference disk gauges
28/2/2017 - PDF - Inglés - BSI
Más información170,00 € -
BS EN ISO 1101:2017
Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
28/2/2017 - PDF - Inglés - BSI
Más información427,00 € -
NBN EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
23/2/2017 - PDF - Francés - NBN
Más información121,00 € -
NBN EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
23/2/2017 - PDF - Alemán - NBN
Más información121,00 € -
NBN EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
23/2/2017 - PDF - Inglés - NBN
Más información121,00 € -
JIS B 7440-9:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems
20/2/2017 - PDF - Japonés - JSA
Más información25,00 € -
JIS B 0028:2017
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
20/2/2017 - PDF - Japonés - JSA
Más información25,00 € -
DIN 863-1:2017-02
Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements, maximum permissible errors
1/2/2017 - PDF - Inglés - DIN
Más información47,29 € -
DIN 2270:2017-02
Geometrical product specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors.
1/2/2017 - PDF - Alemán - DIN
Más información31,12 € -
DIN 863-1:2017-02
Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements, maximum permissible errors.
1/2/2017 - PDF - Alemán - DIN
Más información37,85 € -
BS EN ISO 16610-28:2016
Geometrical product specifications (GPS). Filtration. Profile filters: End effects
31/1/2017 - PDF - Inglés - BSI
Más información238,00 € -
BS EN ISO 14405-3:2017
Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
31/1/2017 - PDF - Inglés - BSI
Más información278,00 € -
NBN EN ISO 16610-28:2017
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
27/1/2017 - PDF - Francés - NBN
Más información121,00 €