Ensayos
-
BS ISO 22290:2020
Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
19/11/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 22232-3:2020
Non-destructive testing. Characterization and verification of ultrasonic test equipment Combined
3/11/2020 - PDF - Inglés -
Más información180,00 € -
ASTM E2860-20 + Redline
Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
1/11/2020 - PDF - Inglés -
Más información68,00 € -
ASTM E2860-20
Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
1/11/2020 - PDF - Inglés -
Más información57,00 € -
NAS 410:2020 + A2:2022
NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
30/10/2020 - PDF sécurisé - Inglés -
Más información93,00 € -
NAS 410:2020 + A2:2022 + Redline
NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
30/10/2020 - PDF sécurisé - Inglés -
Más información100,00 € -
NBN EN ISO 22232-2:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
22/10/2020 - PDF - Francés -
Más información184,00 € -
NBN EN ISO 21432:2020
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
22/10/2020 - PDF - Alemán -
Más información163,00 € -
NBN EN ISO 22232-2:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
22/10/2020 - PDF - Inglés -
Más información184,00 € -
NBN EN ISO 21432:2020
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
22/10/2020 - PDF - Inglés -
Más información163,00 € -
NBN EN ISO 21432:2020
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
22/10/2020 - PDF - Francés -
Más información163,00 € -
BS EN ISO 22232-2:2020
Non-destructive testing. Characterization and verification of ultrasonic test equipment Probes
6/10/2020 - PDF - Inglés -
Más información348,00 € -
DIN EN ISO 10893-8:2020-10
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd 1:2020), German version EN ISO 10893-8:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información72,80 € -
DIN EN ISO 10893-9:2020-10
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd 1:2020), German version EN ISO 10893-9:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información72,80 € -
DIN EN ISO 10893-10:2020-10
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd 1:2020), German version EN ISO 10893-10:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información79,72 € -
DIN EN ISO 10893-3:2020-10
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011 + Amd 1:2019 + Amd 2:2020), German version EN ISO 10893-3:2011 + A1:2019 + A2:2020
1/10/2020 - PDF - Alemán -
Más información79,72 € -
DIN EN ISO 10893-1:2020-10
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011 + Amd 1:2020), German version EN ISO 10893-1:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información79,72 € -
DIN EN ISO 10893-2:2020-10
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd 1:2020), German version EN ISO 10893-2:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información79,72 € -
DIN EN ISO 10893-11:2020-10
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020), German version EN ISO 10893-11:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información72,80 € -
NF EN ISO 22232-3, A09-320-3 (10/2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3 : combined equipment - Essais non destructifs
1/10/2020 - Papel - Francés -
Más información60,67 € -
DIN EN ISO 10893-12:2020-10
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011 + Amd 1:2020), German version EN ISO 10893-12:2011 + A1:2020
1/10/2020 - PDF - Alemán -
Más información59,63 € -
NBN EN ISO 22232-1:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
23/9/2020 - PDF - Francés -
Más información163,00 € -
NBN ISO 19835:2020
Non-destructive testing ? Acoustic emission testing ? Steel structures of overhead travelling cranes and portal bridge cranes
23/9/2020 - PDF - Francés -
Más información89,00 € -
NBN ISO 18251-1:2020
Non-destructive testing — Infrared thermography — Part 1: Characteristics of system and equipment ISO 18251-1:2017
23/9/2020 - PDF - Inglés -
Más información58,00 € -
NBN EN ISO 22232-1:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
23/9/2020 - PDF - Inglés -
Más información163,00 € -
NBN ISO 19835:2020
Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes ISO 19835:2018
23/9/2020 - PDF - Inglés -
Más información89,00 € -
DIN EN ISO 16526-1:2020-09
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011), German version EN ISO 16526-1:2020
1/9/2020 - PDF - Alemán -
Más información45,98 € -
NF EN ISO 22232-2, A09-320-2 (09/2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2 : probes
1/9/2020 - Papel - Francés -
Más información130,50 € -
DIN EN ISO 16526-3:2020-09
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011), German version EN ISO 16526-3:2020
1/9/2020 - PDF - Alemán -
Más información59,63 € -
DIN EN ISO 16526-2:2020-09
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011), German version EN ISO 16526-2:2020
1/9/2020 - PDF - Alemán -
Más información59,63 € -
NF EN ISO 21432, A09-610 (09/2020)
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction
1/9/2020 - Papel - Francés -
Más información119,00 € -
NBN ISO 16837:2020
Non-destructive testing — Acoustic emission testing — Test method for damage qualification of reinforced concrete beams ISO 16837:2019
27/8/2020 - PDF - Inglés -
Más información37,00 € -
NBN EN ISO 10893-9:2011/A1:2020
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
27/8/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-9:2011/A1:2020
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
27/8/2020 - PDF - Inglés -
Más información20,00 € -
NBN ISO 16836:2020
Non-destructive testing — Acoustic emission testing — Measurement method for acoustic emission signals in concrete ISO 16836:2019
27/8/2020 - PDF - Inglés -
Más información58,00 € -
NBN EN ISO 10893-9:2011/A1:2020
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
27/8/2020 - PDF - Alemán -
Más información20,00 € -
NBN ISO 16838:2020
Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures ISO 16838:2019
27/8/2020 - PDF - Inglés -
Más información37,00 € -
BS EN ISO 22232-1:2020 + Redline
Tracked Changes. Non-destructive testing. Characterization and verification of ultrasonic test equipment Instruments
26/8/2020 - PDF - Inglés -
Más información432,00 € -
BS EN ISO 22232-1:2020
Non-destructive testing. Characterization and verification of ultrasonic test equipment Instruments
19/8/2020 - PDF - Inglés -
Más información331,00 € -
NF EN ISO 22232-1, A09-320-1 (08/2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
1/8/2020 - Papel - Francés -
Más información108,33 € -
NBN EN ISO 10893-10:2011/A1:2020
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
29/7/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-11:2011/A1:2020
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
29/7/2020 - PDF - Alemán -
Más información20,00 € -
NBN EN ISO 10893-11:2011/A1:2020
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
29/7/2020 - PDF - Inglés -
Más información20,00 € -
NBN EN ISO 10893-12:2011/A1:2020
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
29/7/2020 - PDF - Alemán -
Más información20,00 € -
NBN EN ISO 10893-1:2011/A1:2020
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
29/7/2020 - PDF - Inglés -
Más información20,00 € -
NBN EN ISO 10893-10:2011/A1:2020
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
29/7/2020 - PDF - Alemán -
Más información20,00 € -
NBN EN ISO 10893-10:2011/A1:2020
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
29/7/2020 - PDF - Inglés -
Más información20,00 € -
NBN EN ISO 10893-1:2011/A1:2020
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
29/7/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-11:2011/A1:2020
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
29/7/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-12:2011/A1:2020
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
29/7/2020 - PDF - Inglés -
Más información20,00 € -
BS EN ISO 10893-9:2011+A1:2020
Non-destructive testing of steel tubes Automated ultrasonic for the detection laminar imperfections in strip/plate used manufacture welded
27/7/2020 - PDF - Inglés -
Más información180,00 € -
UNE-EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
22/7/2020 - PDF - Inglés -
Más información68,40 € -
UNE-EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
22/7/2020 - PDF - Inglés -
Más información55,20 € -
UNE-EN ISO 14096-2:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
22/7/2020 - PDF - Inglés -
Más información63,60 € -
UNE-EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
22/7/2020 - PDF - Español -
Más información58,00 € -
UNE-EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
22/7/2020 - PDF - Español -
Más información57,00 € -
UNE-EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
22/7/2020 - PDF - Español -
Más información46,00 € -
UNE-EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
22/7/2020 - PDF - Inglés -
Más información69,60 € -
UNE-EN ISO 14096-2:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
22/7/2020 - PDF - Español -
Más información53,00 € -
BS EN ISO 10893-11:2011+A1:2020
Non-destructive testing of steel tubes Automated ultrasonic the weld seam welded for detection longitudinal and/or transverse imperfections
17/7/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 10893-10:2011+A1:2020
Non-destructive testing of steel tubes Automated full peripheral ultrasonic seamless and welded (except submerged arc-welded) for the detection longitudinal and/or transverse imperfections
15/7/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 10893-12:2011+A1:2020
Non-destructive testing of steel tubes Automated full peripheral ultrasonic thickness seamless and welded (except submerged arc-welded)
9/7/2020 - PDF - Inglés -
Más información151,00 € -
BS ISO 23159:2020
Non-destructive testing. Gamma ray scanning method on process columns
2/7/2020 - PDF - Inglés -
Más información293,00 € -
NF EN ISO 10893-11/A1, A49-785-11/A1 (07/2020)
Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency, change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 11 : Contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales - Amendement 1 : Modification de la fréquence ultrasonore d'essai des transducteurs -
1/7/2020 - Papel - Francés -
Más información25,67 € -
UNE-EN ISO 14096-1:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
1/7/2020 - PDF - Español -
Más información68,00 € -
101,00 €
-
DIN 54113-3:2020-07
Non-destructive testing - Radiation protection rules for the technical application of X-ray equipment up to 1 MV - Part 3: Formulas and diagrams for the calculation of radiation protection for X-ray equipment up to 600 kV
1/7/2020 - PDF - Alemán -
Más información92,62 € -
ASTM E803-20
Standard Test Method for Determining theL/D , Ratio of Neutron Radiography Beams
1/7/2020 - PDF - Inglés -
Más información51,00 € -
UNE-EN ISO 12718:2020
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
1/7/2020 - PDF - Español -
Más información82,00 € -
NF EN ISO 10893-10/A1, A49-785-10/A1 (07/2020)
Non-destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency - change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 10 : Contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - AMENDEMENT 1 :
1/7/2020 - Papel - Francés -
Más información25,67 € -
UNE-EN ISO 14096-1:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
1/7/2020 - PDF - Inglés -
Más información81,60 € -
NF EN ISO 10893-9/A1, A49-785-9/A1 (07/2020)
Non-destructive testing of steel tubes - Part 9 : Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 9 : Contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles utilisées pour la fabrication des tubes en acier soudés - Amendement 1 : Changement des critères d'acceptation
1/7/2020 - Papel - Francés -
Más información25,67 € -
ASTM E803-20 + Redline
Standard Test Method for Determining theL/D , Ratio of Neutron Radiography Beams
1/7/2020 - PDF - Inglés -
Más información61,00 € -
UNE-EN ISO 12718:2020
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
1/7/2020 - PDF - Inglés -
Más información98,40 € -
NBN EN ISO 10893-2:2011/A1:2020
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
25/6/2020 - PDF - Inglés -
Más información20,00 € -
NBN EN ISO 10893-3:2011/A2:2020
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
25/6/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-2:2011/A1:2020
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
25/6/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-3:2011/A2:2020
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
25/6/2020 - PDF - Inglés -
Más información20,00 € -
NBN EN ISO 10893-8:2011/A1:2020
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
25/6/2020 - PDF - Francés -
Más información20,00 € -
NBN EN ISO 10893-3:2011/A2:2020
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
25/6/2020 - PDF - Alemán -
Más información20,00 € -
NBN EN ISO 10893-8:2011/A1:2020
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
25/6/2020 - PDF - Alemán -
Más información20,00 € -
NBN EN ISO 10893-8:2011/A1:2020
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
25/6/2020 - PDF - Inglés -
Más información20,00 € -
BS EN ISO 10893-1:2011+A1:2020
Non-destructive testing of steel tubes Automated electromagnetic seamless and welded (except submerged arc-welded) for the verification hydraulic leaktightness
16/6/2020 - PDF - Inglés -
Más información180,00 € -
ASTM E2445/E2445M-20
Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
15/6/2020 - PDF - Inglés -
Más información74,00 € -
ASTM E2445/E2445M-20 + Redline
Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
15/6/2020 - PDF - Inglés -
Más información87,00 € -
BS EN ISO 10893-3:2011+A2:2020
Non-destructive testing of steel tubes Automated full peripheral flux leakage seamless and welded (except submerged arc-welded) ferromagnetic for the detection longitudinal and/or transverse imperfections
12/6/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 10893-8:2011+A1:2020
Non-destructive testing of steel tubes Automated ultrasonic seamless and welded for the detection laminar imperfections
12/6/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 10893-2:2011+A1:2020
Non-destructive testing of steel tubes Automated eddy current seamless and welded (except submerged arc-welded) for the detection imperfections
12/6/2020 - PDF - Inglés -
Más información180,00 € -
UNE-CEN ISO/TS 25107:2020
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
10/6/2020 - PDF - Español -
Más información153,00 € -
UNE-CEN ISO/TS 25107:2020
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
10/6/2020 - PDF - Inglés -
Más información183,60 € -
NF EN ISO 10893-2/A1, A49-785-2/A1 (06/2020)
Non-destructive testing of steel tubes - Part 2 : automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1 : change of dimensions of the reference notch, change acceptance criteria - Essais non destructifs des tubes en acier - Partie 2 : Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
1/6/2020 - Papel - Francés -
Más información25,67 € -
ASTM E155-20
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
1/6/2020 - PDF - Inglés -
Más información51,00 € -
ASTM E592-20 + Redline
Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with1 4 Cobalt-60
1/6/2020 - PDF - Inglés -
Más información65,00 € -
ASTM E999-20
Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
1/6/2020 - PDF - Inglés -
Más información51,00 € -
NF EN ISO 10893-8/A1, A49-785-8/A1 (06/2020)
Non-destructive testing of steel tubes - Part 8 : automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1 : change acceptance criteria
1/6/2020 - Papel - Francés -
Más información25,67 € -
61,00 €
-
ASTM E186-20
Standard Reference Radiographs for Heavy-Walled (2 to 4 in. (50.8 to 114 mm)) Steel Castings1 2
1/6/2020 - PDF - Inglés -
Más información51,00 € -
ASTM E155-20 + Redline
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
1/6/2020 - PDF - Inglés -
Más información61,00 € -
ASTM E570-20
Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
1/6/2020 - PDF - Inglés -
Más información51,00 € -
ASTM E999-20 + Redline
Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
1/6/2020 - PDF - Inglés -
Más información61,00 € -
NF EN ISO 10893-12/A1, A49-785-12/A1 (06/2020)
Non-destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1 : change of acceptance criteria
1/6/2020 - Papel - Francés -
Más información25,67 € -
NF EN ISO 10893-1/A1, A49-785-1/A1 (06/2020)
Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1 : change of dimensions of the reference notch , change acceptance criteria - Essais non destructifs des tubes en acier - Partie 1 : Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
1/6/2020 - Papel - Francés -
Más información25,67 € -
ASTM E592-20
Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with1 4 Cobalt-60
1/6/2020 - PDF - Inglés -
Más información54,00 € -
ASTM E186-20 + Redline
Standard Reference Radiographs for Heavy-Walled (2 to 4 in. (50.8 to 114 mm)) Steel Castings1 2
1/6/2020 - PDF - Inglés -
Más información61,00 € -
NF EN ISO 10893-3/A2, A49-785-3/A2 (06/2020)
Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections - Amendment 2 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
1/6/2020 - Papel - Francés -
Más información25,67 € -
51,00 €
-
ASTM E570-20 + Redline
Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
1/6/2020 - PDF - Inglés -
Más información61,00 € -
DIN 54115-1:2020-06
Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources for gamma-radiography - Part 1: Handling, organization and transport
1/6/2020 - PDF - Alemán -
Más información72,80 € -
293,00 €
-
ASTM A745/A745M-20
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
1/5/2020 - PDF - Inglés -
Más información51,00 € -
ASTM A745/A745M-20 + Redline
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
1/5/2020 - PDF - Inglés -
Más información61,00 € -
NBN EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
29/4/2020 - PDF - Francés -
Más información37,00 € -
NBN EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
29/4/2020 - PDF - Francés -
Más información37,00 € -
NBN EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
29/4/2020 - PDF - Francés -
Más información37,00 € -
NBN EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
29/4/2020 - PDF - Alemán -
Más información37,00 € -
NBN EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
29/4/2020 - PDF - Alemán -
Más información37,00 € -
NBN EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
29/4/2020 - PDF - Inglés -
Más información37,00 € -
NBN EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
29/4/2020 - PDF - Inglés -
Más información37,00 € -
NBN EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
29/4/2020 - PDF - Inglés -
Más información37,00 € -
UNE-EN ISO 16809:2020
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
22/4/2020 - PDF - Inglés -
Más información108,00 € -
UNE-EN ISO 16809:2020
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
22/4/2020 - PDF - Español -
Más información90,00 € -
DIN/TS 8204:2020-04
Founding - Radiographic testing - Reference images for spheroidal graphite cast irons and grey cast irons, Text in English
1/4/2020 - PDF - Inglés -
Más información63,64 € -
BS ISO 4992-1:2020
Steel castings. Ultrasonic testing castings for general purposes
27/3/2020 - PDF - Inglés -
Más información293,00 € -
BS ISO 4992-2:2020
Steel castings. Ultrasonic testing castings for highly stressed components
27/3/2020 - PDF - Inglés -
Más información293,00 € -
BS EN ISO 16526-3:2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Spectrometric method
24/3/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 16526-2:2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Constancy check by thick filter method
19/3/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 14096-1:2020
Non-destructive testing. Qualification of radiographic film digitisation systems Definitions, quantitative measurements image quality parameters, standard reference and qualitative control
19/3/2020 - PDF - Inglés -
Más información180,00 € -
BS EN ISO 14096-2:2020
Non-destructive testing. Qualification of radiographic film digitisation systems Minimum requirements
19/3/2020 - PDF - Inglés -
Más información151,00 € -
BS EN ISO 16526-1:2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Voltage divider method
19/3/2020 - PDF - Inglés -
Más información151,00 € -
NF EN ISO 14096-1, A09-252-1 (03/2020)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1 : definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
1/3/2020 - Papel - Francés -
Más información60,50 € -
NF EN ISO 16526-2, A09-230-2 (03/2020)
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2 : constancy check by the thick filter method
1/3/2020 - Papel - Francés -
Más información75,50 € -
NF EN ISO 14096-2, A09-252-2 (03/2020)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2 : minimum requirements
1/3/2020 - Papel - Francés -
Más información34,50 € -
NF EN ISO 16526-3, A09-230-3 (03/2020)
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3 : spectrometric method
1/3/2020 - Papel - Francés -
Más información48,00 € -
NF EN ISO 16526-1, A09-230-1 (03/2020)
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1 : voltage divider method
1/3/2020 - Papel - Francés -
Más información25,50 € -
BS ISO 17577:2016 + Redline
Tracked Changes. Steel. Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
28/2/2020 - PDF - Inglés -
Más información235,00 € -
BS ISO 11484:2019 + Redline
Tracked Changes. Steel products. Employer's qualification system for non-destructive testing (NDT) personnel
28/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN 12679:2018 + Redline
Tracked Changes. Non-destructive testing. Radiographic testing. Determination of the size of industrial radiographic gamma sources
27/2/2020 - PDF - Inglés -
Más información197,00 € -
BS EN 60601-2-17:2015 + Redline
Tracked Changes. Medical electrical equipment Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading
27/2/2020 - PDF - Inglés -
Más información454,00 € -
PD CEN ISO/TS 25108:2018 + Redline
Tracked Changes. Non-destructive testing. NDT personnel training organizations
27/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN ISO 19232-5:2018 + Redline
Tracked Changes. Non-destructive testing. Image quality of radiographs Determination the image unsharpness and basic spatial resolution value using duplex wire-type indicators
26/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN ISO 11699-2:2018 + Redline
Tracked Changes. Non-destructive testing. Industrial radiographic films Control of film processing by means reference values
25/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN ISO 16946:2017 + Redline
Tracked Changes. Non-destructive testing. Ultrasonic testing. Specification for step wedge calibration block
25/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN 10228-1:2016 + Redline
Tracked Changes. Non-destructive testing of steel forgings Magnetic particle inspection
25/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN 13018:2016 + Redline
Tracked Changes. Non-destructive testing. Visual testing. General principles
25/2/2020 - PDF - Inglés -
Más información197,00 € -
BS EN ISO 23278:2015 + Redline
Tracked Changes. Non-destructive testing of welds. Magnetic particle testing. Acceptance levels
25/2/2020 - PDF - Inglés -
Más información197,00 € -
BS EN 1330-9:2017 + Redline
Tracked Changes. Non-destructive testing. Terminology Terms used in acoustic emission testing
25/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN 10228-2:2016 + Redline
Tracked Changes. Non-destructive testing of steel forgings Penetrant
25/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN ISO 9934-2:2015 + Redline
Tracked Changes. Non-destructive testing. Magnetic particle testing Detection media
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN 1371-2:2015 + Redline
Tracked Changes. Founding. Liquid penetrant testing Investment castings
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN ISO 17638:2016 + Redline
Tracked Changes. Non-destructive testing of welds. Magnetic particle testing
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN 10228-3:2016 + Redline
Tracked Changes. Non-destructive testing of steel forgings Ultrasonic ferritic or martensitic
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN ISO 9934-3:2015 + Redline
Tracked Changes. Non-destructive testing. Magnetic particle testing Equipment
24/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN ISO 10893-7:2019 + Redline
Tracked Changes. Non-destructive testing of steel tubes Digital radiographic the weld seam welded for detection imperfections
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN ISO 9934-1:2016 + Redline
Tracked Changes. Non-destructive testing. Magnetic particle testing General principles
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN 10228-4:2016 + Redline
Tracked Changes. Non-destructive testing of steel forgings Ultrasonic austenitic and austenitic-ferritic stainless
24/2/2020 - PDF - Inglés -
Más información326,00 € -
BS EN ISO 15549:2019 + Redline
Tracked Changes. Non-destructive testing. Eddy current testing. General principles
24/2/2020 - PDF - Inglés -
Más información235,00 € -
BS EN ISO 10893-6:2019 + Redline
Tracked Changes. Non-destructive testing of steel tubes Radiographic the weld seam welded for detection imperfections
24/2/2020 - PDF - Inglés -
Más información235,00 € -
293,00 €
-
185,50 €
-
DIN EN ISO 16809:2020-02
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017), German version EN ISO 16809:2019
1/2/2020 - PDF - Alemán -
Más información115,33 € -
BS ISO 11971:2020
Steel and iron castings. Visual testing of surface quality
23/1/2020 - PDF - Inglés -
Más información151,00 € -
UNE-EN ISO 15708-1:2020
Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017)
8/1/2020 - PDF - Inglés -
Más información62,40 € -
UNE-EN ISO 15708-4:2020
Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2017)
8/1/2020 - PDF - Español -
Más información68,00 € -
UNE-EN ISO 15708-3:2020
Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2017)
8/1/2020 - PDF - Español -
Más información73,00 € -
UNE-EN ISO 15549:2020
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)
8/1/2020 - PDF - Inglés -
Más información75,60 € -
UNE-EN ISO 15708-2:2020
Non-destructive testing - Radiation methods for Computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017)
8/1/2020 - PDF - Español -
Más información70,00 € -
UNE-EN ISO 15708-4:2020
Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2017)
8/1/2020 - PDF - Inglés -
Más información81,60 € -
UNE-EN ISO 15708-1:2020
Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology (ISO 15708-1:2017)
8/1/2020 - PDF - Español -
Más información52,00 € -
UNE-EN ISO 15708-3:2020
Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2017)
8/1/2020 - PDF - Inglés -
Más información87,60 € -
UNE-EN ISO 15708-2:2020
Non-destructive testing - Radiation methods for Computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017)
8/1/2020 - PDF - Inglés -
Más información84,00 € -
UNE-EN ISO 15549:2020
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)
8/1/2020 - PDF - Español -
Más información63,00 € -
ANSI/ASNT CP-189-2020
ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel (ANSI/ASNT CP-189-2020)
1/1/2020 - Papel - Inglés -
Más información101,00 € -
ASME ANDE-1-2020
ASME Nondestructive Examination and Quality Control Central Qualification and Certification Program
1/1/2020 - PDF DRM - Inglés -
Más información59,00 € -
ASTM E1962-19 + Redline
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
1/12/2019 - PDF - Inglés -
Más información61,00 € -
DIN EN ISO 12718:2019-12
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019), Trilingual version EN ISO 12718:2019
1/12/2019 - PDF - Inglés, Francés, Alemán -
Más información120,84 € -
ASTM E1962-19
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
1/12/2019 - PDF - Inglés -
Más información51,00 € -
NBN EN ISO 10893-3:2011/A1:2019
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
28/11/2019 - PDF - Alemán -
Más información20,00 € -
NBN EN ISO 10893-3:2011/A1:2019
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
28/11/2019 - PDF - Inglés -
Más información20,00 € -
NBN EN ISO 10893-3:2011/A1:2019
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
28/11/2019 - PDF - Francés -
Más información20,00 € -
UNE-EN ISO 10893-6:2019
Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
20/11/2019 - PDF - Español -
Más información68,00 € -
UNE-CEN ISO/TS 25108:2019
Non-destructive testing - NDT personnel training organizations (ISO/TS 25108:2018)
20/11/2019 - PDF - Español -
Más información74,00 € -
UNE-EN ISO 10893-7:2019
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
20/11/2019 - PDF - Inglés -
Más información88,80 € -
UNE-EN ISO 10893-6:2019
Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
20/11/2019 - PDF - Inglés -
Más información81,60 € -
UNE-CEN ISO/TS 25108:2019
Non-destructive testing - NDT personnel training organizations (ISO/TS 25108:2018)
20/11/2019 - PDF - Inglés -
Más información88,80 € -
UNE-EN ISO 10893-7:2019
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
20/11/2019 - PDF - Español -
Más información74,00 € -
398,00 €
-
NF EN 1971-2, A05-115-2 (11/2019)
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2 : test with an internal probe on the inner surface
1/11/2019 - Papel - Francés -
Más información48,00 € -
NF A09-282 (11/2019)
Non-destructive testing - Phase quantification by X-ray diffraction
1/11/2019 - Papel - Francés -
Más información75,67 € -
NF EN 1971-1, A05-115-1 (11/2019)
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1 : test with an encircling test coil on the outer surface
1/11/2019 - Papel - Francés -
Más información48,00 € -
NF A09-283 (11/2019)
Non-destructive testing - Traceability and securing of radiographic testing
1/11/2019 - Papel - Francés -
Más información34,67 € -
NF EN 2002-16, L10-023 (11/2019)
Aerospace series - Metallic materials - Test methods - Part 16 : non-destructive testing - Penetrant testing
1/11/2019 - Papel - Inglés, Francés -
Más información54,50 € -
26,00 €
-
NBN EN ISO 12718:2019
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
23/10/2019 - PDF - Inglés -
Más información37,00 € -
NBN EN ISO 12718:2019
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
23/10/2019 - PDF - Francés -
Más información37,00 € -
CEN ISO/TS 25107:2019
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
19/10/2019 - PDF - Francés -
Más información205,00 € -
CEN ISO/TS 25107:2019
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
19/10/2019 - PDF - Inglés -
Más información205,00 € -
DIN EN ISO 15549:2019-10
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019), German version EN ISO 15549:2019
1/10/2019 - PDF - Alemán -
Más información72,80 € -
NF EN ISO 10893-3/A1, A49-785-3/A1 (10/2019)
Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of dimensions of the reference notch - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
1/10/2019 - Papel - Francés -
Más información25,67 € -
ASTM A1038-19 + Redline
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
1/10/2019 - PDF - Inglés -
Más información61,00 € -
ASTM A1038-19
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
1/10/2019 - PDF - Inglés -
Más información51,00 €