SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE AS 5756/1C:2023-06-28
CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, NON-OZONE RESISTANT (Stabilized: Jun 2023)
28.06.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9102C:2023-06-28
Aerospace Series - First Article Inspection Requirements
28.06.2023 - PDF - Englisch - SAE
mehr dazu158,00 € -
SAE J 2860:2023-06-28
User’s Manual for the Hybrid III Large Male Test Dummy (Stabilized: Jun 2023)
28.06.2023 - PDF - Englisch - SAE
mehr dazu149,00 € -
SAE J 899:2023-06-28
Operator’s Seat Dimensions for Off-Road Self-Propelled Work Machines (Stabilized: Jun 2023)
28.06.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 947:2023-06-28
Glossary of Fiberboard Terminology (Stabilized: Jun 2023)
28.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
47,00 €
-
SAE AMS 3158E:2023-06-27
Solution, Fluorescent Penetrant Water Base for LOX (Liquid Oxygen) Compatibility
27.06.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AMS 4299B:2023-06-27
Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged
27.06.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 5951B:2023-06-27
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
27.06.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
SAE AMS-R-25988B:2023-06-27
Rubber: Fluorosilicone (FVMQ), Engine Oil / Fuel-Resistant, For Seals in Engine Oil Systems/Fuel Systems
27.06.2023 - PDF - Englisch - SAE
mehr dazu105,00 € -
SAE ARP 994C:2023-06-27
Design of Tubing Installations for Aerospace Hydraulic Systems
27.06.2023 - PDF - Englisch - SAE
mehr dazu120,00 € -
SAE J 1706:2023-06-27
Production, Handling, and Dispensing of SAE J1703 Motor Vehicle Brake Fluids and SAE J1704 Borate Ester-Based Brake Fluids
27.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE J 2236:2023-06-27
Standard Method for Determining Continuous Upper Temperature Limit of Elastomers
27.06.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 2696:2023-06-27
Inboard Mounted Disc Brake Rotor/Disc Wheel Hub Interface Dimensions - Commercial Vehicles
27.06.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE J 444:2023-06-27
Cast Shot and Grit Size Specifications for Cleaning and Peening
27.06.2023 - PDF - Englisch - SAE
mehr dazu87,00 € -
SAE J 994:2023-06-27
Alarm - Backup - Electric Laboratory Performance Testing
27.06.2023 - PDF - Englisch - SAE
mehr dazu98,00 € -
122,00 €
-
SAE J 3280:2023-06-20
Guidelines for Haptic Interaction in a Driver Vehicle Interface
20.06.2023 - PDF - Englisch - SAE
mehr dazu93,00 € -
SAE AMS 3238K:2023-06-19
Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 (Stabilized: Jun 2023)
19.06.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AS 1581E:2023-06-19
FITTING, SLEEVE, FLARELESS ACORN TO INTEGRAL WELD RING, 3000 PSI
19.06.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
119,00 €
-
SAE J 1953:2023-06-19
Brake-Stroke Indicator Design Guideline for Cam or Disc Air-Brake Actuators
19.06.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 3001:2023-06-19
Brake Insulator Damping Measurement Procedure (Stabilized: Jun 2023)
19.06.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
54,00 €
-
SAE AMS 4015N:2023-06-13
Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed
13.06.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AMS 5636H:2023-06-13
Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength
13.06.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AMS 7912E:2023-06-13
Aluminum-Beryllium Alloy, Extrusions 38Al - 62Be Annealed
13.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE ARP 1048C:2023-06-13
Instrument and Cockpit Illumination for General Aviation Aircraft
13.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 1100D:2023-06-13
FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING
13.06.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE J 1939/84:2023-06-13
OBD Communications Compliance Test Cases for Heavy-Duty Components and Vehicles
13.06.2023 - PDF - Englisch - SAE
mehr dazu160,00 € -
SAE J 3109:2023-06-13
PWM HVAC Blower Controller and BLDC Motor Controller Efficiency Assessment
13.06.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
SAE AMS 2374F:2023-06-12
Quality Assurance Sampling and Testing Corrosion- and Heat-Resistant Steel and Alloy Forgings
12.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 4904E:2023-06-12
Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged
12.06.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 5610R:2023-06-12
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining
12.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 5768M:2023-06-12
Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Rings and Stock for Forgings, Rings and Heading 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated
12.06.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AS 4832B:2023-06-12
Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals
12.06.2023 - PDF - Englisch - SAE
mehr dazu96,00 € -
SAE AS 9706A:2023-06-12
SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, NICKEL ALLOY (UNS N07001), .2500-28 UNJF-3A
12.06.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE J 1436:2023-06-12
Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests
12.06.2023 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE J 1842:2023-06-12
Disc Wheel Hub/Spoke Wheel and Axle Interface Dimensions - Truck and Bus
12.06.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
93,00 €
-
60,00 €
-
135,00 €
-
SAE AIR 38D:2023-06-05
Guide for the Design of Threaded Screw or Stud Type Electrical Equipment Terminations
05.06.2023 - PDF - Englisch - SAE
mehr dazu103,00 € -
109,00 €
-
SAE ARP 6911:2023-06-05
Horizontal Balancing Systems - Isolating Repeatability Issues in Challenging Applications
05.06.2023 - PDF - Englisch - SAE
mehr dazu118,00 € -
54,00 €
-
SAE AMS 3242J:2023-06-02
Chloroprene (CR) Rubber Weather Resistant 75 - 85 (Stabilized: Jun 2023)
02.06.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 5906D:2023-06-02
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength
02.06.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 15720D:2023-06-02
FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION-RESISTANT STEEL, TYPE VII
02.06.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 15721D:2023-06-02
FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION-RESISTANT STEEL, TYPE VIII
02.06.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
70,00 €
-
SAE AS 21155C:2023-06-02
BEARING, PLAIN, SELF-ALIGNING, CHAMFERED OUTER RING (Stabilized: Jun 2023)
02.06.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 4296A:2023-06-02
Drawing Interpretation and Standard Machining Practices, Couplings, Fittings, and Hose Ends, Fluid Systems
02.06.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AS 4407C:2023-06-02
FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
02.06.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
70,00 €
-
SAE AS 6870A:2023-06-02
Nondestructive Inspection Program Requirements for Aerospace Systems
02.06.2023 - PDF - Englisch - SAE
mehr dazu109,00 € -
SAE J 1939:2023-06-02
Serial Control and Communications Heavy-Duty Vehicle Network - Top-Level Document
02.06.2023 - PDF - Englisch - SAE
mehr dazu128,00 € -
47,00 €
-
118,00 €
-
SAE J 3213:2023-06-02
Brake Dynamometer Squeal Noise Test Procedure for Commercial Vehicles with Air Brakes
02.06.2023 - PDF - Englisch - SAE
mehr dazu126,00 € -
SAE J 2721:2023-05-31
Recommended Corrosion Test Methods for Commercial Vehicle Components
31.05.2023 - PDF - Englisch - SAE
mehr dazu126,00 € -
SAE AMS 5665R:2023-05-30
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Forgings and Rings 74Ni - 15.5Cr - 8.0Fe
30.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
60,00 €
-
SAE AS 4409C:2023-05-30
FITTING ASSEMBLY, ELBOW 45°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
30.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 46778-3:2023-05-26
AS46778 Pins, Quick Release, (Ball Type) C.R. Steel, 'L' Handle, Single Acting
26.05.2023 - PDF - Englisch - SAE
mehr dazu100,00 € -
SAE AS 46778AR-3:2023-05-26
AS46778AR Amendment Record for Aerospace Standard No. AS46778
26.05.2023 - PDF - Englisch - SAE
mehr dazu100,00 € -
SAE AS 54381AR-2:2023-05-26
AS54381-390AR Amendment Record for Drawing Standard No. AS54381-390
26.05.2023 - PDF - Englisch - SAE
mehr dazu100,00 € -
SAE AS 65113-3:2023-05-26
AS65113 Nut, Self Locking, Shank, Flange Restrained, 0.3750-24UNJF–3B BS.A346 (ISO3161). Based on AS63479 with 3g, 5g and15g of Additional Mass.
26.05.2023 - PDF - Englisch - SAE
mehr dazu100,00 € -
SAE AS 65113AR-3:2023-05-26
AS65113AR Amendment Record for Drawing Standard No. AS65113
26.05.2023 - PDF - Englisch - SAE
mehr dazu100,00 € -
SAE AS 22520/10A:2023-05-25
CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES AND END CAPS
25.05.2023 - PDF - Englisch - SAE
mehr dazu96,00 € -
SAE AS 39029/44E:2023-05-25
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS)
25.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
70,00 €
-
86,00 €
-
75,00 €
-
SAE J 2931/4:2023-05-24
Broadband PLC Communication for Plug-in Electric Vehicles
24.05.2023 - PDF - Englisch - SAE
mehr dazu150,00 € -
SAE J 2953/1:2023-05-24
Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
24.05.2023 - PDF - Englisch - SAE
mehr dazu120,00 € -
SAE AS 22520/5B:2023-05-23
CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COXIAL, TWIN AXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS
23.05.2023 - PDF - Englisch - SAE
mehr dazu107,00 € -
SAE AIR 6977:2023-05-22
Water Content Instrumentation for Icing Cloud Characterization
22.05.2023 - PDF - Englisch - SAE
mehr dazu140,00 € -
SAE AMS 1525E:2023-05-22
Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent, Cold Operations (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 1541D:2023-05-22
Cleaner, Fuel Drop Tank Water Soluble (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 2303G:2023-05-22
Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure
22.05.2023 - PDF - Englisch - SAE
mehr dazu93,00 € -
79,00 €
-
SAE AMS 4991G:2023-05-22
Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
22.05.2023 - PDF - Englisch - SAE
mehr dazu105,00 € -
SAE AMS 5571K:2023-05-22
Steel, Corrosion- and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
22.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 5596N:2023-05-22
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
22.05.2023 - PDF - Englisch - SAE
mehr dazu87,00 € -
SAE AMS 5632K:2023-05-22
Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Forging Stock, 17Cr - 0.50Mo (0.95 - 1.20C) (440F), Free-Machining, Annealed
22.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 5680K:2023-05-22
Steel, Corrosion- and Heat-Resistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (Nb) (SAE 30347)
22.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 6290L:2023-05-22
Steel, Bars, Forgings, and Forging Stock, Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615)
22.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
70,00 €
-
SAE AMS-H-81829B:2023-05-22
Heat Transfer Fluid, Fluorochemical (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AS 10051B:2023-05-22
HUBS, CONDUIT CONNECTION, STANDARD DIMENSIONS (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 10380B:2023-05-22
COUPLING INSTALLATIONS, STANDARD CONDUIT, ELECTRICAL (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 22520/48A:2023-05-22
CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8
22.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 39029/103C:2023-05-22
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SRIES I, III, AND IV CONNECTORS)
22.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
140,00 €
-
SAE AS 6136B:2023-05-22
Conduit, Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu93,00 € -
139,00 €
-
SAE AS 7045:2023-05-22
Residual Stress Measurement and Classification, Metallic Structural Alloy Products and Finished Parts
22.05.2023 - PDF - Englisch - SAE
mehr dazu98,00 € -
SAE AS 95A:2023-05-22
FITTING ASSEMBLY, CROSS, REDUCER AND NON-REDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE
22.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
134,00 €
-
SAE J 2862:2023-05-22
User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu147,00 € -
SAE J 3187:2023-05-22
System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry
22.05.2023 - PDF - Englisch - SAE
mehr dazu142,00 € -
111,00 €
-
SAE J 399:2023-05-22
Anodized Aluminum Automotive Parts (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
87,00 €
-
SAE J 474:2023-05-22
Electroplating and Related Finishes (Stabilized: May 2023)
22.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE J 1671:2023-05-19
Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Truck and Bus
19.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE J 2953/2:2023-05-19
Test Procedures for the Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
19.05.2023 - PDF - Englisch - SAE
mehr dazu132,00 € -
60,00 €
-
75,00 €
-
SAE AMS 4111F:2023-05-17
Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated
17.05.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
66,00 €
-
86,00 €
-
SAE AIR 7058:2023-05-10
High-Voltage DC Electromechanical, Solid State, and Hybrid Switching Devices in Aerospace Applications
10.05.2023 - PDF - Englisch - SAE
mehr dazu109,00 € -
60,00 €
-
SAE AMS 2222L:2023-05-10
Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
10.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
60,00 €
-
SAE AMS 3043F:2023-05-10
Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 4071P:2023-05-10
Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed
10.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 4107H:2023-05-10
Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
10.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 4113G:2023-05-10
Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
10.05.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AMS 4245G:2023-05-10
Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)
10.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AMS 4296D:2023-05-10
Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 4477B:2023-05-10
Aluminum Alloy, Coiled Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Solution Treated
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 4599B:2023-05-10
Aluminum Alloy, Sheet, and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 4950F:2023-05-10
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength
10.05.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
SAE AMS 5540R:2023-05-10
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 5564D:2023-05-10
Steel, Corrosion Resistant, Tubing 19Cr - 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper
10.05.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 6544F:2023-05-10
Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted, Solution Heat Treated
10.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE ARP 6290:2023-05-10
Guidelines for the Development of Architectures for Integrated Vehicle Health Management Systems
10.05.2023 - PDF - Englisch - SAE
mehr dazu147,00 € -
SAE AS 3481K:2023-05-10
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
10.05.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 39029/102B:2023-05-10
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES I, II, III, AND IV CONNECTORS)
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 39029/45E:2023-05-10
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS)
10.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
60,00 €
-
107,00 €
-
96,00 €
-
SAE AS 9212D:2023-05-10
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER-HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
10.05.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9576E:2023-05-10
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
10.05.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9596C:2023-05-10
BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL UNS G41300, .190 BOLT
10.05.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 9734C:2023-05-10
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .3125-24 UNJF-3A
10.05.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE J 1082:2023-05-10
Fuel Economy Measurement Road Test Procedure (Stabilized: May 2023)
10.05.2023 - PDF - Englisch - SAE
mehr dazu114,00 € -
60,00 €
-
SAE J 1926/3:2023-05-10
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
10.05.2023 - PDF - Englisch - SAE
mehr dazu93,00 € -
SAE J 2284/1:2023-05-10
High-Speed CAN (HSC) for Vehicle Applications at 125 kbps (Stabilized: May 2023)
10.05.2023 - PDF - Englisch - SAE
mehr dazu127,00 € -
SAE J 2284/2:2023-05-10
High-Speed CAN (HSC) for Vehicle Applications at 250 kbps (Stabilized: May 2023)
10.05.2023 - PDF - Englisch - SAE
mehr dazu127,00 € -
119,00 €
-
SAE J 2643:2023-05-10
Standard Reference Elastomers (SREs) for Characterizing the Effect of Liquids on Vulcanized Rubbers
10.05.2023 - PDF - Englisch - SAE
mehr dazu103,00 € -
SAE J 2927:2023-05-10
Integrated R-1234yf Refrigerant Identifier for Recovery and Recycling Equipment Used in Mobile A/C System Servicing
10.05.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
98,00 €
-
89,00 €
-
47,00 €
-
SAE J 948:2023-05-10
Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth
10.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 3105/1:2023-05-05
Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Infrastructure-Mounted Pantograph (Cross-Rail) Connection
05.05.2023 - PDF - Englisch - SAE
mehr dazu103,00 € -
SAE J 3105/2:2023-05-05
Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Vehicle-Mounted Pantograph (Bus-Up)
05.05.2023 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE J 3105:2023-05-05
Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices
05.05.2023 - PDF - Englisch - SAE
mehr dazu160,00 € -
SAE AIR 1390B:2023-05-01
Convenient Location of Oxygen Masks for Both the Crew and Passengers of Aircraft (Stabilized: May 2023)
01.05.2023 - PDF - Englisch - SAE
mehr dazu107,00 € -
60,00 €
-
SAE AMS 6308G:2023-05-01
Steel, Bars, and Forgings and Forging Stock 0.90Si - 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vacuum Arc or Electroslag Remelted
01.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6408F:2023-05-01
Steel, Hotwork Tool, Bars, and Forgings and Forging Stock 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
01.05.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
SAE AMS 6463G:2023-05-01
Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging
01.05.2023 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6527G:2023-05-01
Steel, Bars, Forgings, and Forging Stock 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged
01.05.2023 - PDF - Englisch - SAE
mehr dazu83,00 € -
147,00 €
-
SAE ARP 6412:2023-05-01
Recommended Practice for Landing Gear Integrity Programs
01.05.2023 - PDF - Englisch - SAE
mehr dazu125,00 € -
66,00 €
-
SAE ARP 741D:2023-05-01
Turbofan and Turbojet Gas Turbine Engine Test Cell Correlation
01.05.2023 - PDF - Englisch - SAE
mehr dazu113,00 € -
SAE J 1340:2023-05-01
Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses (Stabilized: May 2023)
01.05.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 1341:2023-05-01
Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses (Stabilized: May 2023)
01.05.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 1681:2023-05-01
Gasoline, Alcohol, and Diesel Fuel Surrogates for Materials Testing
01.05.2023 - PDF - Englisch - SAE
mehr dazu101,00 € -
SAE J 2858:2023-05-01
Hybrid III Ten-Year Old Child Dummy User’s Manual (Stabilized: May 2023)
01.05.2023 - PDF - Englisch - SAE
mehr dazu139,00 € -
SAE J 2970:2023-05-01
Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
01.05.2023 - PDF - Englisch - SAE
mehr dazu96,00 € -
111,00 €
-
SAE AS 172201B:2023-04-21
WASHER, KEY - SINGLE, BEARING RETAINING, AMS6350 (UNS G41300)
21.04.2023 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AS 3243E:2023-04-21
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI UTS MIN, .1900-32 UNJF-3A
21.04.2023 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AS 6081A:2023-04-21
Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts: Avoidance, Detection, Mitigation, and Disposition - Independent Distribution
21.04.2023 - PDF - Englisch - SAE
mehr dazu118,00 € -
SAE AS 9557F:2023-04-21
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .2500-28 UNJF-3A
21.04.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9573D:2023-04-21
SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A
21.04.2023 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AS 9685D:2023-04-21
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
21.04.2023 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AS 9895C:2023-04-21
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, DRILLED, CORROSION RESISANT STEEL (UNS S41800), .2500-28 UNJF-3A
21.04.2023 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE J 1626/2:2023-04-21
Recommended Practice for Braking, Stability, and Control Performance Test Procedure for Air-Brake-Equipped Trucks and Buses
21.04.2023 - PDF - Englisch - SAE
mehr dazu116,00 € -
SAE J 2725:2023-04-21
Road Vehicles - Friction Materials - Elastic Properties Measurements
21.04.2023 - PDF - Englisch - SAE
mehr dazu122,00 € -
118,00 €
-
SAE AMS 3213N:2023-04-12
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85 (Stabilized: Apr 2023)
12.04.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
SAE AMS-P-5510B:2023-04-12
O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) (Stabilized: Apr 2023)
12.04.2023 - PDF - Englisch - SAE
mehr dazu83,00 € -
SAE ARP 1256E:2023-04-12
Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
12.04.2023 - PDF - Englisch - SAE
mehr dazu111,00 € -
SAE J 2536:2023-04-12
Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for Trucks, Truck-Tractors, and Buses
12.04.2023 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE J 2789:2023-04-12
Inertia Calculation for Single-Ended Inertia-Dynamometer Testing (Stabilized: Apr 2023)
12.04.2023 - PDF - Englisch - SAE
mehr dazu93,00 € -
SAE AIR 8035:2023-04-04
Fuel Flow Rates for Jet-Powered Commercial Aircraft Taxi Operations
04.04.2023 - PDF - Englisch - SAE
mehr dazu75,00 € -
87,00 €
-
SAE AMS 5441C:2023-04-04
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb (Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable
04.04.2023 - PDF - Englisch - SAE
mehr dazu79,00 € -
158,00 €
-
143,00 €
-
SAE AS 4405B:2023-04-04
FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
04.04.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 4406B:2023-04-04
FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE
04.04.2023 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 81044/11B:2023-04-04
WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, LIGHT WEIGHT, 600-VOLT, 150 °C (Stabilized: Apr 2023)
04.04.2023 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 1113/1:2023-04-04
Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz)
04.04.2023 - PDF - Englisch - SAE
mehr dazu129,00 € -
SAE J 2473:2023-04-04
Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge
04.04.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
103,00 €
-
79,00 €
-
SAE J 585:2023-04-04
Tail Lamp (Rear Position Lamp) for Use on Motor Vehicles Less than, Equal to, or Greater than 2032 mm in Overall Width
04.04.2023 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AS 6286C:2023-03-31
Aircraft Ground Deicing/Anti-Icing Training and Qualification Program
31.03.2023 - PDF - Englisch - SAE
mehr dazu156,00 €
