SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE AMS 5678G:2020-05-26
Steel, Corrosion Resistant, Wire 17Cr - 7.1NI - 1.1Al Cold Drawn, Precipitation-Hardenable
26.05.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE ARP 5448/5B:2020-05-26
Plain Bearing No-Load Rotational Breakaway Torque Measurement
26.05.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE J 2263:2020-05-26
Road Load Measurement Using Onboard Anemometry and Coastdown Techniques
26.05.2020 - PDF - Englisch - SAE
mehr dazu103,00 € -
SAE J 2467:2020-05-26
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending, Single Flaring, Cold Forming, Welding, and Brazing
26.05.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
98,00 €
-
SAE J 3006:2020-05-26
Low-Duty Inertia Dynamometer Hydraulic Brake Wear Test Procedures for Vehicles Above 4536 kg (10000 pounds) of GVWR
26.05.2020 - PDF - Englisch - SAE
mehr dazu105,00 € -
107,00 €
-
SAE J 392:2020-05-26
Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage
26.05.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
87,00 €
-
SAE J 1814:2020-05-22
Operator Controls - Off-Road Machines (Stabilized: May 2020)
22.05.2020 - PDF - Englisch - SAE
mehr dazu93,00 € -
SAE J 3152:2020-05-22
Taxonomy and Guidelines for Design, Fabrication, and Installation of Brake NVH Fixtures for Inertia Dynamometer Testing
22.05.2020 - PDF - Englisch - SAE
mehr dazu111,00 € -
SAE ARP 780C:2020-05-20
Environmental Systems Schematic Symbols (Stabilized: May 2020)
20.05.2020 - PDF - Englisch - SAE
mehr dazu109,00 € -
SAE AS 7974/1B:2020-05-20
CONNECTOR, PLUG, AIRCRAFT EXTERNAL POWER, 115/200 VOLT, 400 HERTZ
20.05.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AMS 2300M:2020-05-19
Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
19.05.2020 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE AMS 2301L:2020-05-19
Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
19.05.2020 - PDF - Englisch - SAE
mehr dazu98,00 € -
SAE AMS 2304C:2020-05-19
Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure
19.05.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
83,00 €
-
SAE AMS 5764F:2020-05-19
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, and Rings 5.0Mn - 22Cr - 12.5Ni - 2.2Mo - 0.20Cb - 0.30N - 0.20V Solution Heat Treated
19.05.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6437K:2020-05-19
Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11)
19.05.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
60,00 €
-
SAE AMS 3345G:2020-05-18
Elastomer: Methyl Phenyl Vinyl Silicone (PVMQ) Very Low Temperature/Aircraft Piston Engine Oil Resistant High Strength/Tear Resistant 45 to 55 Durometer Type ‘A’ Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
18.05.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 7276J:2020-05-18
Rubber: Fluorocarbon (FKM) High Temperature - Fluid Resistant Low Compression Set/70 to 80 Type A Hardness For Seals in Fuel Systems and Specific Engine Oil Systems
18.05.2020 - PDF - Englisch - SAE
mehr dazu87,00 € -
SAE AMS 7379A:2020-05-18
Rubber: Fluorocarbon Elastomer (FKM) Low Temperature Sealing Tg -40 °F (-40 °C) 70 to 80 Type ‘A’ Hardness For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
18.05.2020 - PDF - Englisch - SAE
mehr dazu86,00 € -
105,00 €
-
SAE AS 8662A:2020-05-18
Knife, Hunting, Sheathed, Survival, Pilot’s (Stabilized: May 2020)
18.05.2020 - PDF - Englisch - SAE
mehr dazu113,00 € -
SAE AS 8044A:2020-05-15
Takeoff Performance Monitor (TOPM) System, Airplane, Minimum Performance Standard for (Stabilized: May 2020)
15.05.2020 - PDF - Englisch - SAE
mehr dazu114,00 € -
SAE J 2711:2020-05-15
Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles
15.05.2020 - PDF - Englisch - SAE
mehr dazu131,00 € -
SAE J 2773:2020-05-15
Standard for Refrigerant Risk Analysis for Mobile Air Conditioning Systems
15.05.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 9742B:2020-05-13
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S17400, 140 KSI MIN .2500-28 UNJF-3A
13.05.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
103,00 €
-
86,00 €
-
135,00 €
-
SAE AS 1040G:2020-05-12
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED
12.05.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 3208A:2020-05-12
PACKING, PREFORMED - AMS 7276 - SEAL (Stabilized: May 2020)
12.05.2020 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AS 3581A:2020-05-12
PACKING, PREFORMED - O-RING SEAL AMS7259 (Stabilized: May 2020)
12.05.2020 - PDF - Englisch - SAE
mehr dazu83,00 € -
70,00 €
-
SAE AS 6231A:2020-05-12
FITTING, ADAPTER, EXTERNAL THREAD, SPHERICAL, 37° FLARED TO INTEGRAL WELD RING
12.05.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 85052B:2020-05-12
Clamp Assembly, Loop Type, Cushioned, General Specification for
12.05.2020 - PDF - Englisch - SAE
mehr dazu101,00 € -
103,00 €
-
SAE AMS 5743K:2020-05-11
Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered
11.05.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 5745G:2020-05-11
Steel, Corrosion and Heat-Resistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Equalized and Over-Tempered
11.05.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
79,00 €
-
SAE AS 5869G:2020-05-08
FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
08.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 6322A:2020-05-08
FITTING ASSEMBLY, EXTENDED UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
08.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AIR 1698B:2020-05-07
Hose Assembly Identification Practices (Stabilized: May 2020)
07.05.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
60,00 €
-
SAE AMS 5036J:2020-05-07
Steel Sheet and Strip, Aluminum Coated, Low Carbon (Stabilized: May 2020)
07.05.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
54,00 €
-
SAE AS 5970D:2020-05-07
FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5972H:2020-05-07
FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu98,00 € -
SAE AS 5974F:2020-05-07
FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5975D:2020-05-07
FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5976C:2020-05-07
FITTING ASSEMBLY, ELBOW, 90°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5977C:2020-05-07
FITTING ASSEMBLY, 90°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5978C:2020-05-07
FITTING ASSEMBLY, ELBOW 45°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5979C:2020-05-07
FITTING ASSEMBLY, ELBOW, 45°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 6107B:2020-05-07
FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
07.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 2805:2020-05-07
Measurement of Noise Emitted by Accelerating Road Vehicles
07.05.2020 - PDF - Englisch - SAE
mehr dazu135,00 € -
SAE AIR 1418B:2020-05-06
Flexure Fatigue Strength of Tube Fitting Joints (Stabilized: May 2020)
06.05.2020 - PDF - Englisch - SAE
mehr dazu101,00 € -
SAE AIR 1529B:2020-05-06
Flexure Testing of Hydraulic Tubing Joints and Fittings by Planar Resonant Vibration (Free-Free Beam) (Stabilized: May 2020)
06.05.2020 - PDF - Englisch - SAE
mehr dazu96,00 € -
SAE AIR 5615A:2020-05-06
Procedure for Determining the Dimensional Relationship of Rotating Components Coupled with Thrust Wires (Stabilized: May 2020)
06.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AMS 5616N:2020-05-06
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed
06.05.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 7881B:2020-05-06
Tungsten Carbide-Cobalt Powder Agglomerated and Sintered
06.05.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 5801B:2020-05-06
FITTING ASSEMBLY, 90°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
06.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5802B:2020-05-06
FITTING ASSEMBLY, ELBOW, 90°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
06.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5803B:2020-05-06
FITTING ASSEMBLY, ELBOW, 45°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
06.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5804C:2020-05-06
FITTING ASSEMBLY, TEE, FEMALE FLARELESS AND AXIALLY SWAGED ON THE RUN, AXIALLY SWAGED ON THE BRANCH, HYDRAULIC, 3000 PSI
06.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AMS 2433D:2020-05-05
Plating, Nickel-Thallium-Boron or Nickel-Boron Electroless Deposition
05.05.2020 - PDF - Englisch - SAE
mehr dazu83,00 € -
SAE AMS 3226J:2020-05-05
Elastomer: Acrylonitrile Butadiene Rubber (NBR) Hot Oil and Coolant Resistant, Low Swell 45 to 55 Type ‘A’ Durometer Hardness for Products in Engine Oil Systems/Coolant Systems
05.05.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 4325A:2020-05-05
Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged
05.05.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 5805B:2020-05-05
FITTING ASSEMBLY, ELBOW, 90°, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5806B:2020-05-05
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, 3000 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 5807C:2020-05-05
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON THE BRANCH HYDRAULIC, 3000 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5808D:2020-05-05
FITTING ASSEMBLY, TEE FEMALE FLARELESS AND AXIALLY SWAGE ON RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, 3000 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5809B:2020-05-05
FITTING ASSEMBLY, TEE, FEMALE FLARELESS AND AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON BRANCH, HYDRAULIC, 3000 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5810C:2020-05-05
FITTING ASSEMBLY, TEE, MALE FLARELESS ON THE RUN, AXIALLY SWAGED ON THE RUN AND THE BRANCH, HYDRAULIC, 3000 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 5868D:2020-05-05
FITTING ASSEMBLY, STRAIGHT, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 6106B:2020-05-05
FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
05.05.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 3178:2020-05-05
Adhesives, Sealants, and Heat Transfer Materials in Battery Systems: A Primer on Materials, Applications, and End-Use Performance Requirements
05.05.2020 - PDF - Englisch - SAE
mehr dazu136,00 € -
SAE ARP 1328D:2020-04-29
Aircraft Ground Support Equipment - Wind Stability Determination
29.04.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AS 5767B:2020-04-29
FITTING ASSEMBLY, TEE, FEMALE FLARELESS ON RUN, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
29.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5793B:2020-04-29
FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
29.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
131,00 €
-
SAE J 2891:2020-04-29
Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks
29.04.2020 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE J 578:2020-04-29
Chromaticity Requirements for Ground Vehicle Lamps and Lighting Equipment
29.04.2020 - PDF - Englisch - SAE
mehr dazu87,00 € -
SAE AMS 3212R:2020-04-28
Elastomer: Acrylonitrile Butadiene Rubber (NBR) Aromatic Fuel Resistant 55 to 65 Type ‘A’ Durometer Hardness For Products in: Aromatic and Aliphatic Fuel Systems
28.04.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 6385L:2020-04-28
Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)
28.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AS 5791B:2020-04-28
FITTING ASSEMBLY, STRAIGHT, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
28.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 5792D:2020-04-28
FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
28.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 6483:2020-04-28
FITTING, ADAPTER, STRAIGHT, EXTERNAL SWAGE TO FLANGE, FLARELESS
28.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
122,00 €
-
SAE J 1994:2020-04-28
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Heat Transfer and Pressure Drop Performance
28.04.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE ARP 8996:2020-04-27
Comprehensibility Testing for Pictogram-Based Aircraft Signs and Placards
27.04.2020 - PDF - Englisch - SAE
mehr dazu101,00 € -
SAE AS 22759/187C:2020-04-27
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 °C, 600 VOLTS ROHS
27.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 3319F:2020-04-27
STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .1900-24 UNJC X .1900-32 UNJF
27.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9783B:2020-04-27
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A
27.04.2020 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AS 9784B:2020-04-27
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .2500-28 UNJF-3A
27.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9918B:2020-04-27
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL SAE 8740, CADMIUM PLATED, 125 KSI MIN. UTS, .4375-20 UNJF-3A
27.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 6896:2020-04-24
Aircraft Markings for Ground Support Equipment Alignment
24.04.2020 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE ARP 6001B:2020-04-23
Aerospace - Passive Side Stick Unit General Requirements for Fly-by Wire Transport and Business
23.04.2020 - PDF - Englisch - SAE
mehr dazu122,00 € -
83,00 €
-
SAE AS 81306/1C:2020-04-22
BAND INSTALLATION TOOL, HAND, ONE-STEP, FOR AS85049/128 CONNECTOR ACCESSORY CABLE SHIELD TERMINATING BANDS
22.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AIR 6904:2020-04-21
Rationale, Considerations, and Framework for Data Interoperability for Health Management within the Aerospace Ecosystem
21.04.2020 - PDF - Englisch - SAE
mehr dazu116,00 € -
SAE AMS 5789E:2020-04-21
Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 54Co - 25.5Cr - 10.5Ni - 7.5W
21.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
60,00 €
-
SAE AS 1038H:2020-04-21
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED
21.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE AS 85449/1A:2020-04-21
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FUEL AND PETROLEUM BASED HYDRAULIC FLUID
21.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 85449/2A:2020-04-21
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT
21.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 85449/3A:2020-04-21
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE
21.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
47,00 €
-
SAE AS 85449/5A:2020-04-21
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FIRE RESISTANCE, LOW SMOKE DENSITY AND TOXICITY
21.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 85449B:2020-04-21
Clamp Assembly, Saddle Type, Cushioned, General Specification For
21.04.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AS 8993:2020-04-21
Coefficient of Friction Test Method for Aircraft Flooring and Walkway Surfaces
21.04.2020 - PDF - Englisch - SAE
mehr dazu79,00 € -
SAE J 3119:2020-04-21
Reliability, Maintainability, and Sustainability Terms and Definitions
21.04.2020 - PDF - Englisch - SAE
mehr dazu113,00 € -
SAE AMS 3387F:2020-04-16
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Textile Reinforced, Chloroprene Covered Noncollapsing (Stabilized: Apr 2020)
16.04.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 5022P:2020-04-14
Steel, Bars, Forgings, and Tubing, Free-Cutting 0.14 - 0.20C (SAE 1117) (Stabilized: Apr 2020)
14.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 5024J:2020-04-14
Steel, Bars, Forgings, and Tubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137) (Stabilized: Apr 2020)
14.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE ARP 1061B:2020-04-14
Altitude Alerting Devices and Systems (Stabilized: Apr 2020)
14.04.2020 - PDF - Englisch - SAE
mehr dazu109,00 € -
SAE ARP 175A:2020-04-14
Temperature Measurement, Well Insert Type (Stabilized: Apr 2020)
14.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE ARP 416B:2020-04-14
Directional Indicating System (Turbine Powered Subsonic Aircraft) (Stabilized: Apr 2020)
14.04.2020 - PDF - Englisch - SAE
mehr dazu101,00 € -
133,00 €
-
83,00 €
-
SAE AS 3109B:2020-04-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .3125-24 UNJF-3A
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 3110B:2020-04-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .3750-24 UNJF-3A
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 3113B:2020-04-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .5625-18 UNJF-3A
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 3308B:2020-04-14
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 3658B:2020-04-14
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
14.04.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AS 3659A:2020-04-14
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
14.04.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AS 85052/1B:2020-04-14
CLAMP, LOOP, TUBE, 17-7PH, 275 °F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 85052/2B:2020-04-14
CLAMP, LOOP TUBE 17-7PH, CRES, 275 °F, PHOSPHATE ESTER FLUID RESISTANT
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
47,00 €
-
39,00 €
-
SAE AS 85052/1B:2020-04-14
CLAMP, LOOP, TUBE, 17-7PH, 275 °F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT
14.04.2020 - PDF - Englisch - SAE
mehr dazu81,00 € -
SAE AS 9785B:2020-04-14
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .3125-24 UNJF-3A
14.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 9786B:2020-04-14
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .3750-24 UNJF-3A
14.04.2020 - PDF - Englisch - SAE
mehr dazu39,00 € -
103,00 €
-
54,00 €
-
SAE AS 5394A:2020-04-11
Health and Usage Monitoring System Advanced Multipoint Interface Specification (Stabilized: Apr 2020)
11.04.2020 - PDF - Englisch - SAE
mehr dazu107,00 € -
SAE AS 6102B:2020-04-11
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED, 37° SPHERICAL
11.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 6103B:2020-04-11
FITTING, CROSS, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
11.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 6104B:2020-04-11
FITTING, ELBOW 45°, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
11.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 6105B:2020-04-11
FITTING, TEE, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
11.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AS 6230A:2020-04-11
FITTING, 37° INTERNAL FLARE TO TUBE WELD, STRAIGHT AND REDUCER
11.04.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 7468C:2020-04-11
Bolts, Cobalt-Chromium-Nickel Alloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification
11.04.2020 - PDF - Englisch - SAE
mehr dazu105,00 € -
SAE AS 9790B:2020-04-11
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .6250-18 UNJF-3A
11.04.2020 - PDF - Englisch - SAE
mehr dazu39,00 € -
SAE AMS 2547:2020-04-10
Electropolishing of Metallic Parts and Materials Using Computer Aided Engineering
10.04.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 4087J:2020-04-10
Aluminum Alloy Tubing, Seamless, Drawn 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed
10.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 4287B:2020-04-10
Aluminum Alloy, Extrusion 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1 to 4% and Aged
10.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 5886D:2020-04-10
Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted 2100 °F (1149 °C) Solution Heat Treated
10.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6325L:2020-04-10
Steel, Bars, and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 105 ksi (724 MPa) Tensile Strength
10.04.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE AMS 6345E:2020-04-10
Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated
10.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6350P:2020-04-10
Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
10.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6351L:2020-04-10
Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized
10.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6359L:2020-04-10
Steel, Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)
10.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 6395J:2020-04-10
Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.38 - 0.43C) (SAE 4140)
10.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 1424H:2020-04-07
Hose Assemblies, Metal, Medium Pressure, High Temperature
07.04.2020 - PDF - Englisch - SAE
mehr dazu107,00 € -
60,00 €
-
60,00 €
-
SAE AS 1039H:2020-04-03
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
03.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AS 1576G:2024-02-23
Fittings, Welded, Hydraulic, Titanium, Corrosion-Resistant Steel and Nickel, 3000 psi Hydraulic
03.04.2020 - PDF - Englisch - SAE
mehr dazu120,00 € -
SAE AMS 4899E:2020-04-02
Titanium Alloy, Sheet, Strip, and Plate 4.5Al - 3V - 2Fe - 2Mo Annealed
02.04.2020 - PDF - Englisch - SAE
mehr dazu75,00 € -
70,00 €
-
SAE AMS 4956H:2020-04-02
Titanium Alloy Welding Wire 6Al - 4V, Extra Low Interstitial Environment Controlled Packaging
02.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE AMS 5769G:2020-04-02
Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe Solution Heat Treated
02.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE AMS 5790E:2020-04-02
Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade
02.04.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
54,00 €
-
47,00 €
-
54,00 €
-
SAE AS 5392A:2020-04-02
Health and Usage Monitoring System, Rotational System Indexing Sensor Specification (Stabilized: Apr 2020)
02.04.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AS 5393A:2020-04-02
Health and Usage Monitoring System, Blade Tracker Interface Specification (Stabilized: Apr 2020)
02.04.2020 - PDF - Englisch - SAE
mehr dazu122,00 € -
SAE AS 81714/69B:2020-04-02
TERMINAL JUNCTION SYSTEM, BLOCK REMOVAL TOOLS, SERIES II
02.04.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE AIR 1093B:2020-04-01
Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays (Stabilized: Apr 2020)
01.04.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
150,00 €
-
SAE AS 1033G:2020-04-01
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
01.04.2020 - PDF - Englisch - SAE
mehr dazu70,00 € -
54,00 €
-
54,00 €
-
SAE J 1051:2020-03-30
Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines (Stabilized: Mar 2020)
30.03.2020 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 2551/3:2020-03-30
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
30.03.2020 - PDF - Englisch - SAE
mehr dazu101,00 € -
SAE MA 3379A:2020-03-30
STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286 MJ METRIC 6 X 1 - 6 X 1
30.03.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 3303B:2020-03-26
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3A
26.03.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
54,00 €
-
60,00 €
-
SAE AS 31061C:2020-03-24
CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE
24.03.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AS 9638B:2020-03-24
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS4967 (UNS R56400), .500-20 UNJF-3A
24.03.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AIR 6915:2020-03-20
Human Factor Considerations in the Implementation of IVHM
20.03.2020 - PDF - Englisch - SAE
mehr dazu118,00 € -
SAE AS 81511/45A:2020-03-20
CONNECTOR, RECEPTACLE, CABLE CONNECTING, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, INDIVIDUAL RELEASE, CRIMP TYPE CONTACTS (CLASS A, F, AND W - SERIES 3)
20.03.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 81511/45A:2020-03-20
CONNECTOR, RECEPTACLE, CABLE CONNECTING, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, INDIVIDUAL RELEASE, CRIMP TYPE CONTACTS (CLASS A, F, AND W - SERIES 3)
20.03.2020 - PDF - Englisch - SAE
mehr dazu81,00 € -
SAE AIR 1616B:2020-03-19
Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel Systems
19.03.2020 - PDF - Englisch - SAE
mehr dazu101,00 € -
SAE AS 81511/41A:2020-03-19
CONNECTOR, RECEPTACLE, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, INDIVIDUAL RELEASE, CRIMP TYPE CONTACTS (CLASS A, F, AND W - SERIES 3)
19.03.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 81511/51A:2020-03-19
CONNECTOR, RECEPTACLE, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, INDIVIDUAL RELEASE, CRIMP TYPE CONTACTS (CLASS A, F, AND W - SERIES 4)
19.03.2020 - PDF - Englisch - SAE
mehr dazu47,00 € -
SAE AS 85049/93C:2020-03-19
CONNECTOR ACCESSORIES, ELECTRICAL, TERMINATION, SHIELD SPLIT SUPPORT RING, COMPOSITE, NONENVIRONMENTAL, STRAIGHT, CATEGORY 7
19.03.2020 - PDF - Englisch - SAE
mehr dazu54,00 € -
70,00 €
-
SAE AMS 6356J:2020-03-18
Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C) (4132)
18.03.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE ARP 6283/1:2020-03-18
In-Service Fiber Optic Inspection, Evaluation, and Cleaning, Best Practices, Expanded Beam Termini
18.03.2020 - PDF - Englisch - SAE
mehr dazu111,00 € -
SAE ARP 6283/2:2020-03-18
In-Service Fiber Optic Inspection, Evaluation, and Cleaning, Best Practices, Multi-Fiber Push on Termini
18.03.2020 - PDF - Englisch - SAE
mehr dazu116,00 € -
SAE AS 5127/1D:2020-03-18
Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds
18.03.2020 - PDF - Englisch - SAE
mehr dazu137,00 € -
87,00 €
-
SAE MA 3512A:2020-03-18
BOLT, MACHINE - SPLINE DRIVE HD, CLOSE TOL FULL SHANK, UNS N07001, METRIC
18.03.2020 - PDF - Englisch - SAE
mehr dazu79,00 € -
70,00 €
-
158,00 €
