SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE AMS 5508G:2021-03-16
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed
16.03.2021 - PDF - Englisch -
mehr dazu60,00 € -
212,00 €
-
SAE AIR 4092B:2021-03-16
Investigation of PTFE "Melt" Phenomenon for High Pressure Hoses (Stabilized: Mar 2021)
16.03.2021 - PDF - Englisch -
mehr dazu98,00 € -
SAE AMS 3307E:2021-03-16
Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness
16.03.2021 - PDF - Englisch -
mehr dazu70,00 € -
SAE AIR 2000F:2021-03-16
Aerospace Fluid System Standards, Metric, National and International (Stabilized: Mar 2021)
16.03.2021 - PDF - Englisch -
mehr dazu133,00 € -
SAE EIA 731_2A:2021-03-16
Systems Engineering Capability Model Appraisal Method (Stabilized: Mar 2021)
16.03.2021 - PDF - Englisch -
mehr dazu232,00 € -
SAE AS 85485/5B:2021-03-16
CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 °C, 600-VOLT (Stabilized: Mar 2021)
16.03.2021 - PDF - Englisch -
mehr dazu60,00 € -
75,00 €
-
SAE AMS 3332G:2021-03-10
Elastomer: Methyl Phenyl Vinyl Silicone Rubber (PVMQ) Extreme Low-Temperature Resistant 15 - 30 Type A Hardness
10.03.2021 - PDF - Englisch -
mehr dazu70,00 € -
SAE AMS 3357H:2021-03-10
Elastomer: Silicone Rubber (VMQ) Aircraft Piston Engine Oil Resistant Compression Set Resistant 65 - 75 Type A Hardness
10.03.2021 - PDF - Englisch -
mehr dazu75,00 € -
SAE AMS 6891/4:2021-03-10
Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 42, Class 4, Grade 48, Style 108
10.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
75,00 €
-
SAE J 3113:2021-03-10
Principles and Process for Developing Icons for Electronic Displays
10.03.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE J 3072:2021-03-10
Interconnection Requirements for Onboard, Grid Support Inverter Systems
10.03.2021 - PDF - Englisch -
mehr dazu143,00 € -
SAE AMS 6891/3:2021-03-10
Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 34, Class 4, Grade 294, Style 7781
10.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 4875B:2021-03-09
Fittings, Straight Threaded Boss or Flanged, Fluid Connection, Procurement Specification
09.03.2021 - PDF - Englisch -
mehr dazu107,00 € -
47,00 €
-
SAE J 2387:2021-03-08
Dimensions and Tolerances for Coolant System Hoses (Stabilized: Mar 2021)
08.03.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE AS 6488:2021-03-08
FITTING, TEE, BULKHEAD, MALE FLARELESS TO EXTERNAL SWAGE ON RUN, EXTERNAL SWAGE ON BRANCH, HYDRAULIC
08.03.2021 - PDF - Englisch -
mehr dazu66,00 € -
47,00 €
-
SAE AS 3114B:2021-03-08
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES UNS S66286, .1900-32 UNJF-3A
08.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 1895/19B:2021-03-08
FLANGE, FEMALE, INTEGRAL, WELD RING, TYPE I STANDARD PROFILE
08.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AIR 6181A:2021-03-08
Electronic Propulsion Control System/Aircraft Interface Control Documents
08.03.2021 - PDF - Englisch -
mehr dazu107,00 € -
SAE J 2370:2021-03-08
Geometric Dimensions and Tolerancing for Curved Hose (Stabilized: Mar 2021)
08.03.2021 - PDF - Englisch -
mehr dazu89,00 € -
SAE AS 4842B:2021-03-08
Fittings and Bosses, Pipe Threaded, Fluid Connection, Procurement Specification
08.03.2021 - PDF - Englisch -
mehr dazu107,00 € -
47,00 €
-
47,00 €
-
SAE MA 3347A:2021-03-05
BOLT, MACHINE-HEX HEAD-FULL SHANK, LONG THREAD, AMS5731, METRIC
05.03.2021 - PDF - Englisch -
mehr dazu79,00 € -
SAE AS 3115B:2021-03-05
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES UNS S66286, .2500-28 UNJF-3A
05.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AMS 5869D:2021-03-05
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated
05.03.2021 - PDF - Englisch -
mehr dazu66,00 € -
SAE AS 81550B:2021-03-05
Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone
05.03.2021 - PDF - Englisch -
mehr dazu96,00 € -
47,00 €
-
47,00 €
-
SAE AS 9402C:2021-03-03
BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .5000-20 UNJF-3A
03.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 3230C:2021-03-03
RIVET-TUBULAR, COUNTERSUNK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N06600)
03.03.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE AS 9958B:2021-03-03
BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, LOW ALLOY STEEL UNS G87400, CADMIUM PLATED, .2500-28 UNJF-3A
03.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 9401C:2021-03-03
BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .4375-20 UNJF-3A
03.03.2021 - PDF - Englisch -
mehr dazu47,00 € -
47,00 €
-
SAE J 2426:2021-03-01
Occupant Restraint System Evaluation - Lateral Rollover System-Level Heavy Trucks
01.03.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE J 1161:2021-03-01
Operational Sound Level Measurement Procedure for Snowmobiles
01.03.2021 - PDF - Englisch -
mehr dazu39,00 € -
SAE AIR 5995A:2021-03-01
Evaluation of Human Factor Considerations for Outdoor Laser Operations in the Navigable Airspace (Stabilized: Mar 2021)
01.03.2021 - PDF - Englisch -
mehr dazu120,00 € -
SAE AMS 6422L:2021-03-01
Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40)
01.03.2021 - PDF - Englisch -
mehr dazu79,00 € -
SAE J 1462:2021-03-01
External Automatic Brake Adjuster Test Procedure - Truck and Bus
01.03.2021 - PDF - Englisch -
mehr dazu118,00 € -
79,00 €
-
SAE AMS 5595H:2021-03-01
Steel, Corrosion Resistant, Sheet, Strip, and Plate 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat Treated
01.03.2021 - PDF - Englisch -
mehr dazu66,00 € -
113,00 €
-
SAE AS 1132K:2021-03-01
Bolts, Screws, and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
01.03.2021 - PDF - Englisch -
mehr dazu131,00 € -
SAE AS 13100:2021-03-01
AESQ Quality Management System Requirements for Aero Engine Design and Production Organizations
01.03.2021 - PDF - Englisch -
mehr dazu154,00 € -
SAE MA 3348A:2021-03-01
BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, NICKEL ALLOY (UNS N07001), METRIC
01.03.2021 - PDF - Englisch -
mehr dazu83,00 € -
SAE AMS 6425F:2021-03-01
Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted
01.03.2021 - PDF - Englisch -
mehr dazu83,00 € -
47,00 €
-
118,00 €
-
SAE AMS 6423J:2021-03-01
Steel Bars, Forgings, and Tubing 0.92Cr - 0.75No - 0.52Mo - 0.003B - 0.04V (Modified 98BV40)
01.03.2021 - PDF - Englisch -
mehr dazu79,00 € -
SAE ARP 5598A:2021-03-01
Unauthorized Laser Illuminations: Pilot Operational Procedures (Stabilized: Mar 2021)
01.03.2021 - PDF - Englisch -
mehr dazu101,00 € -
75,00 €
-
SAE AMS 6421H:2021-03-01
Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37)
01.03.2021 - PDF - Englisch -
mehr dazu79,00 € -
87,00 €
-
212,00 €
-
SAE AMS 6885:2021-02-23
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 0 - Introduction
23.02.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE AMS 6885/1:2021-02-23
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements
23.02.2021 - PDF - Englisch -
mehr dazu139,00 € -
SAE AMS 6885/2:2021-02-23
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 2 - Qualification Program for Fiber, Carbon Fiber Tape Prepreg, and Film Adhesive
23.02.2021 - PDF - Englisch -
mehr dazu103,00 € -
SAE AMS 6885/5:2021-02-22
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 5 - Material Specification for Unidirectional Carbon Fiber Tape Epoxy Prepreg for Repair and Film Adhesive for Repair, 120 to 145 °C (250 to 290 °F) Curing
22.02.2021 - PDF - Englisch -
mehr dazu98,00 € -
SAE AMS 6885/3:2021-02-22
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg
22.02.2021 - PDF - Englisch -
mehr dazu93,00 € -
SAE AMS 6885/4:2021-02-22
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
22.02.2021 - PDF - Englisch -
mehr dazu89,00 € -
SAE AIR 1168/4C:2021-02-19
SAE Aerospace Applied Thermodynamics Manual Ice, Rain, Fog, and Frost Protection (Stabilized: Feb 2021)
19.02.2021 - PDF - Englisch -
mehr dazu149,00 € -
SAE AS 5756C:2021-02-19
Cable, Power, Electrical, Portable General Specification for
19.02.2021 - PDF - Englisch -
mehr dazu114,00 € -
SAE AMS 6417K:2021-02-12
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
12.02.2021 - PDF - Englisch -
mehr dazu83,00 € -
83,00 €
-
SAE AS 1290C:2021-02-12
Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems
12.02.2021 - PDF - Englisch -
mehr dazu143,00 € -
SAE AMS 6419K:2021-02-12
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Consumable Electrode Vacuum Remelted
12.02.2021 - PDF - Englisch -
mehr dazu83,00 € -
47,00 €
-
SAE AS 39029/83B:2021-02-12
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28840 CONNECTORS)
12.02.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE AS 39029/86B:2021-02-11
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS)
11.02.2021 - PDF - Englisch -
mehr dazu54,00 € -
113,00 €
-
60,00 €
-
SAE ARP 6275A:2021-02-11
Determination of Costs and Benefits from Implementing an Integrated Vehicle Health Management System
11.02.2021 - PDF - Englisch -
mehr dazu128,00 € -
124,00 €
-
SAE AMS 4476A:2021-02-11
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed
11.02.2021 - PDF - Englisch -
mehr dazu66,00 € -
SAE AS 39029/85B:2021-02-11
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS)
11.02.2021 - PDF - Englisch -
mehr dazu54,00 € -
118,00 €
-
SAE AS 5537A:2021-02-10
Weather Support to Deicing Decision Making (WSDDM) Winter Weather Nowcasting System
10.02.2021 - PDF - Englisch -
mehr dazu93,00 € -
96,00 €
-
96,00 €
-
SAE AS 12840AR-5:2021-02-09
AS12840-869AR Amendment Record for Drawing Standard No. AS12840-869
09.02.2021 - PDF - Englisch -
mehr dazu96,00 € -
SAE AS 63476AR-6:2021-02-09
AS63476-479AR Amendment Record for Drawing Standard No. AS63476-479
09.02.2021 - PDF - Englisch -
mehr dazu96,00 € -
SAE AS 44750AR-9:2021-02-09
AS44750-753AR Amendment Record for Drawing Standard No. AS44750-753
09.02.2021 - PDF - Englisch -
mehr dazu96,00 € -
SAE AS 70002:2021-02-09
AS70002 BOLT, EXTERNAL MORTORQ® SUPER, TENSION HEAD, .250-28 to 1.375-120 UNJF-3A
09.02.2021 - PDF - Englisch -
mehr dazu96,00 € -
96,00 €
-
SAE J 267:2021-02-04
Wheels/Rims - Truck and Bus - Performance Requirements and Test Procedures for Radial and Cornering Fatigue
04.02.2021 - PDF - Englisch -
mehr dazu89,00 € -
89,00 €
-
75,00 €
-
SAE AMS 6458K:2021-02-03
Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging
03.02.2021 - PDF - Englisch -
mehr dazu70,00 € -
154,00 €
-
146,00 €
-
SAE AS 85049/20C:2021-02-01
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
01.02.2021 - PDF - Englisch -
mehr dazu47,00 € -
54,00 €
-
SAE AIR 4869B:2021-02-01
Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells
01.02.2021 - PDF - Englisch -
mehr dazu93,00 € -
66,00 €
-
SAE AMS 59_047:2021-01-28
Conformal Coatings for Panels, Printed Circuit and Panels, Electronic Circuit
28.01.2021 - PDF - Englisch -
mehr dazu122,00 € -
113,00 €
-
SAE J 1948:2021-01-27
Cab Sleeper Occupant Restraint System Test (Stabilized: Jan 2021)
27.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
66,00 €
-
54,00 €
-
SAE J 2784:2021-01-27
FMVSS Inertia Dynamometer Test Procedure for Vehicles Below 4540 kg GVWR
27.01.2021 - PDF - Englisch -
mehr dazu124,00 € -
83,00 €
-
47,00 €
-
54,00 €
-
SAE AS 18121B:2021-01-27
FERRULES, OUTER, INSULATED, SHIELD TERMINATING, TYPE II TWO-PIECE, CLASS I, FOR SHIELDED CABLE
27.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE J 3096:2021-01-27
Cooling System Non-Metallic Caps and Filler Necks - Threaded Construction
27.01.2021 - PDF - Englisch -
mehr dazu70,00 € -
SAE J 3002:2021-01-27
Disc and Drum Brake Dynamometer Low-Frequency Noise Test Procedure
27.01.2021 - PDF - Englisch -
mehr dazu93,00 € -
54,00 €
-
SAE AS 81969/11A:2021-01-26
REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, WRAPPOST/CRIMP REMOVABLE) TYPE II, CLASS 1, COMPOSITION C (Stabilized: Jan 2021)
26.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE AS 81969/4A:2021-01-26
REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, WRAP POST/CRIMP REMOVABLE) TYPE II, CLASS 1, COMPOSITION C (Stabilized: Jan 2021)
26.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE AS 81969/25A:2021-01-26
INSTALLING AND REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION C (Stabilized: Jan 2021)
26.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE AS 81969/5A:2021-01-26
INSTALLING TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, CRIMP REMOVABLE) TYPE I, CLASS 1, COMPOSITION A (Stabilized: Jan 2021)
26.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
98,00 €
-
SAE AS 81969/10A:2021-01-26
INSTALLING AND REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, TYPE I AND II, CLASS 2, COMPOSITION B (Stabilized: Jan 2021)
26.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AMS 4457A:2021-01-26
Aluminum Alloy, Sheet 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.12Zr (2098-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
26.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE AS 81969/13A:2021-01-26
INSTALLING TOOLS, CONNECTOR, ELECTRICAL CONTACT, (TYPE CR) TYPE I, CLASS 1, COMPOSITION A (Stabilized: Jan 2021)
26.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AMS 5794F:2021-01-26
Iron Alloy, Corrosion and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N, Annealed
26.01.2021 - PDF - Englisch -
mehr dazu66,00 € -
89,00 €
-
SAE ARP 1110D:2021-01-21
Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys
21.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE AMS 4510J:2021-01-20
Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08)
20.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
120,00 €
-
98,00 €
-
SAE AS 12810AR-6:2021-01-18
AS12810-839AR Amendment Record for Drawing Standard No. AS12810-839
18.01.2021 - PDF - Englisch -
mehr dazu96,00 € -
96,00 €
-
SAE AS 3400B:2021-01-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A
14.01.2021 - PDF - Englisch -
mehr dazu39,00 € -
SAE ARP 570B:2021-01-14
Designation of Direction of Rotation of Helicopter Rotors (Stabilized: Jan 2021)
14.01.2021 - PDF - Englisch -
mehr dazu39,00 € -
SAE ARP 6420:2021-01-14
Guidelines for Characterization of Gas Turbine Engine Total-Pressure, Planar-Wave, and Total-Temperature Inlet-Flow Distortion
14.01.2021 - PDF - Englisch -
mehr dazu128,00 € -
96,00 €
-
128,00 €
-
SAE J 1739:2021-01-13
Potential Failure Mode and Effects Analysis (FMEA) Including Design FMEA, Supplemental FMEA-MSR, and Process FMEA
13.01.2021 - PDF - Englisch -
mehr dazu156,00 € -
SAE AMS 5859F:2021-01-13
Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable
13.01.2021 - PDF - Englisch -
mehr dazu70,00 € -
113,00 €
-
SAE AS 3401B:2021-01-13
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A
13.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE J 3176:2021-01-13
Cable Marking for Circuit Identification in Multi-Voltage Power Distribution Systems
13.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE J 3079/1:2021-01-13
Validation of Compressibility Test Systems for Friction Materials
13.01.2021 - PDF - Englisch -
mehr dazu118,00 € -
SAE AS 3161B:2021-01-13
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .5000-20 UNJF-3A
13.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 81914/7A:2021-01-13
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED WITH INTEGRAL BRAID(S)
13.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 39029/35C:2021-01-12
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS)
12.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AIR 1266B:2021-01-12
Fault Isolation in Environmental Control Systems of Commercial Transports
12.01.2021 - PDF - Englisch -
mehr dazu137,00 € -
75,00 €
-
SAE AS 7928/15B:2021-01-12
TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, FLAG TONGUE, SIZES 22-10, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
12.01.2021 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 39029/34C:2021-01-12
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS)
12.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE J 1524:2021-01-07
Method of Viscosity Test for Automotive Type Adhesives, Sealers, and Deadeners (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu101,00 € -
SAE J 1864:2021-01-07
Method for Evaluating Material Separation in Automotive Sealers Under Pressure in Static Conditions (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu89,00 € -
SAE J 1529:2021-01-07
Overlap Shear Test for Automotive Type Sealant for Stationary Glass Bonding (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu66,00 € -
SAE J 1847:2021-01-07
Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
SAE J 1525:2021-01-07
Lap Shear Test for Automotive-Type Adhesives for Fiber Reinforced Plastic (FRP) Bonding (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE J 1836:2021-01-07
Overlap Shear Test for Sealant Adhesive Bonding of Automotive Glass Encapsulating Material to Body Opening (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu70,00 € -
SAE AS 5419/8B:2021-01-07
WIRE, THERMOCOUPLE, SMOOTH SURFACE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP), NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 °C (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu75,00 € -
SAE J 1700:2021-01-07
Softening Point of Interior Trim Adhesives (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
SAE J 1918:2021-01-07
Method for the Determination of Expansion and Water Absorption in Automotive Sealers (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu98,00 € -
SAE J 1523:2021-01-07
Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu54,00 € -
60,00 €
-
70,00 €
-
SAE J 1969:2021-01-07
Electrocoat Compatibilities of Automotive Sealers (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu79,00 € -
SAE J 1553:2021-01-07
Cross Peel Test for Automotive Type Adhesives for Fiber-Reinforced Plastic (FRP) Bonding (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu70,00 € -
SAE J 2025:2021-01-07
Method for Evaluating the Flow Properties of Pumpable Sealers (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu75,00 € -
70,00 €
-
SAE J 2100:2021-01-07
Accelerated Environmental Testing for Bonded Automotive Assemblies (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu66,00 € -
SAE AS 39029/57C:2021-01-07
CONTACTS, ELECTRICAL CONNECTORS, SOCKET CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES II, MIL-DTL-55302/68, /71, /72, /75 AND MIL-DTL-83733 CONNECTORS)
07.01.2021 - PDF - Englisch -
mehr dazu66,00 € -
SAE J 1907:2021-01-07
Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu66,00 € -
SAE AS 5419/9B:2021-01-07
WIRE, THERMOCOUPLE, SMOOTH SURFACE FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP), NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 °C (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu75,00 € -
SAE J 1851:2021-01-07
Induction Cure Test for Metal Bonding Adhesives (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu75,00 € -
SAE J 243:2021-01-07
Methods of Tests for Automotive-Type Sealers, Adhesives, and Deadeners (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu124,00 € -
SAE J 2215:2021-01-07
Surface Match Verification Method for Pressure Sensitive Adhesively Attached Components (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch -
mehr dazu60,00 € -
81,00 €
-
101,00 €
-
SAE J 3039:2020-12-30
Definition and Measurement of Power Transfer Unit Speed-Dependent Parasitic Loss
30.12.2020 - PDF - Englisch -
mehr dazu89,00 € -
79,00 €
-
75,00 €
-
SAE AMS 6891:2020-12-30
Carbon Fiber and Fiberglass Epoxy Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications
30.12.2020 - PDF - Englisch -
mehr dazu120,00 € -
54,00 €
-
SAE AS 3156B:2020-12-30
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .190-32 UNJF-3A
30.12.2020 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 3158B:2020-12-30
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .3125-24 UNJF-3A
30.12.2020 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 3160B:2020-12-30
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .4375-20 UNJF-3A
30.12.2020 - PDF - Englisch -
mehr dazu47,00 € -
87,00 €
-
SAE AMS 6891/1:2020-12-29
Carbon Fiber and Fiberglass Epoxy Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 35, Class 1, Grade 191
29.12.2020 - PDF - Englisch -
mehr dazu54,00 € -
SAE AS 3157B:2020-12-29
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .250-28 UNJF-3A
29.12.2020 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 8050:2020-12-29
Connectors, Fiber Optic, Advanced, Circular, Modular or Rectangular, Plug and Receptacle, Harsh Environment, Removable Termini, General Specification for
29.12.2020 - PDF - Englisch -
mehr dazu113,00 € -
SAE AMS 6891/2:2020-12-29
Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 40, Class 1, Grade 196, Style 6K-PW
29.12.2020 - PDF - Englisch -
mehr dazu54,00 € -
54,00 €
-
SAE AS 3162B:2020-12-29
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .5625-18 UNJF-3A
29.12.2020 - PDF - Englisch -
mehr dazu47,00 € -
SAE AIR 6966:2020-12-29
Conducting Measurement Systems Analysis for Rotor Balancing Tasks
29.12.2020 - PDF - Englisch -
mehr dazu70,00 € -
SAE AMS 5950D:2020-12-29
Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
29.12.2020 - PDF - Englisch -
mehr dazu79,00 € -
SAE AS 6021A:2020-12-29
AS6021 Aerospace Fiber Optic Cable Assembly Drawing Specification (Stabilized: Dec 2020)
29.12.2020 - PDF - Englisch -
mehr dazu114,00 € -
SAE AS 7511B:2020-12-22
ASSEMBLED COUPLING ENVELOPE, THREADLESS - FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, ENVELOPE DIMENSIONS
22.12.2020 - PDF - Englisch -
mehr dazu39,00 € -
SAE ARP 921B:2020-12-22
Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft (Stabilized: Dec 2020)
22.12.2020 - PDF - Englisch -
mehr dazu98,00 € -
SAE AS 440B:2020-12-22
Automatic Pilots (Turbine Powered Subsonic Aircraft) (Stabilized: Dec 2020)
22.12.2020 - PDF - Englisch -
mehr dazu96,00 € -
79,00 €
-
SAE AS 9924C:2020-12-22
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
22.12.2020 - PDF - Englisch -
mehr dazu47,00 € -
SAE AS 8014A:2020-12-22
Minimum Performance Standard Stall Warning Equipment (Stabilized: Dec 2020)
22.12.2020 - PDF - Englisch -
mehr dazu66,00 € -
SAE AIR 1081A:2020-12-22
House Noise-Reduction Measurements for Use in Studies of Aircraft Flyover Noise (Stabilized: Dec 2020)
22.12.2020 - PDF - Englisch -
mehr dazu107,00 € -
SAE AIR 1935A:2020-12-22
Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs (Stabilized: Dec 2020)
22.12.2020 - PDF - Englisch -
mehr dazu101,00 € -
SAE J 1269:2020-12-22
Rolling Resistance Measurement Procedure for Passenger Car, Light Truck, and Highway Truck and Bus Tires
22.12.2020 - PDF - Englisch -
mehr dazu89,00 € -
SAE ARP 5898A:2020-12-22
Human Interface Criteria for Flight Deck Surface Operations Displays (Stabilized: Dec 2020)
22.12.2020 - PDF - Englisch -
mehr dazu141,00 € -
70,00 €
-
SAE AS 9952:2020-12-22
WASHER, CUP, LOCK - EXPANDER NUT CORROSION AND HEAT RESISTANT STEEL, UNS S34700
22.12.2020 - PDF - Englisch -
mehr dazu54,00 €
