SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE IEEE/SAEAS 6675:2025-11-07
Time-Sensitive Networking for Aerospace Onboard Ethernet Communications
07.11.2025 - PDF - Englisch - SAE
mehr dazu151,00 € -
89,00 € -
SAE AS 22520/2C:2025-11-04
CRIMPING TOOLS, TYPE 1, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 20 THROUGH 28
04.11.2025 - PDF - Englisch - SAE
mehr dazu143,00 € -
SAE J 2592:2025-11-04
Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing
04.11.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE AMS 5343G:2025-11-03
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu (17-4), Homogenization, Solution, and Precipitation Heat Treated (H1000), 150 ksi (1034 MPa) Tensile Strength
03.11.2025 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE AMS 5629K:2025-11-03
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al (PH 13-8 Mo), Vacuum Induction Plus Consumable Electrode Melted, Premium Aircraft-Quality, Solution Heat Treated, Precipitation Hardenable
03.11.2025 - PDF - Englisch - SAE
mehr dazu90,00 € -
SAE AMS 5769H:2025-11-03
Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe (N-155), Solution Heat Treated
03.11.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
125,00 € -
SAE J 2014:2025-11-03
Pneumatic Tire/Wheel/Runflat Assembly Qualifications for Military Tactical Wheeled Vehicles
03.11.2025 - PDF - Englisch - SAE
mehr dazu152,00 € -
131,00 € -
SAE AMS 7273D:2025-10-24
Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant For Seals In Fuel Systems and Specific Engine Oil Systems
24.10.2025 - PDF - Englisch - SAE
mehr dazu99,00 € -
122,00 € -
95,00 € -
SAE J 2012DA:2025-10-24
Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
24.10.2025 - PDF - Englisch - SAE
mehr dazu720,00 € -
SAE ARP 5602:2025-10-23
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education
23.10.2025 - PDF - Englisch - SAE
mehr dazu89,00 € -
SAE ARP 5602/1:2025-10-23
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Knowledge Competencies
23.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE ARP 5602/14:2025-10-23
A Re-Certification Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Hands-on Competencies
23.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE ARP 5602/2:2025-10-23
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Hands-on Competencies
23.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE ARP 5602/3:2025-10-23
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Knowledge Competencies
23.10.2025 - PDF - Englisch - SAE
mehr dazu106,00 € -
SAE ARP 5602/4:2025-10-23
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Hands-on Competencies
23.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE ARP 6283/1:2025-10-23
In-Service Fiber Optic Inspection, Evaluation, and Cleaning, Best Practices, Expanded Beam Termini
23.10.2025 - PDF - Englisch - SAE
mehr dazu114,00 € -
SAE AMS 4424M:2025-10-23
Magnesium Alloy Castings, Sand, 6.0Al - 3.0Zn (AZ63-T6), Solution and Precipitation Heat Treated
23.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 4845K:2025-10-23
Tin Bronze Castings, Sand and Centrifugal, 87.5Cu - 10Sn - 2Zn, As Cast
23.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE AMS 6533D:2025-10-23
Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
56,00 € -
SAE AS 21233B:2025-10-23
BEARING, PLAIN, SELF-ALIGNING, PTFE LINED, NARROW (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 21240A:2025-10-23
BEARING, SLEEVE, PLAIN, SELF-LUBRICATING -65 TO +250 °F (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 21241A:2025-10-23
BEARING, SLEEVE, FLANGED, SELF-LUBRICATING -65 TO +250 °F (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 34001C:2025-10-23
CONNECTORS, RECEPTACLE, ELECTRIC, WALL MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE
23.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AS 34011B:2025-10-23
CONNECTORS, RECEPTACLE, ELECTRIC, CABLE CONNECTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE
23.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AS 34081B:2025-10-23
CONNECTORS, PLUG, ELECTRIC, 90° ASSEMBLY, CRIMP CONTACT, AN TYPE
23.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE J 1704:2025-10-23
Motor Vehicle Brake Fluid Based Upon Glycols, Glycol Ethers, and the Corresponding Borates
23.10.2025 - PDF - Englisch - SAE
mehr dazu122,00 € -
SAE J 1986:2025-10-23
Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations
23.10.2025 - PDF - Englisch - SAE
mehr dazu95,00 € -
111,00 € -
49,00 € -
SAE AMS 6423K:2025-10-23
Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 0.92Cr - 0.75Ni - 0.52Mo - 0.003B - 0.04V (98BV40), Aircraft Quality
23.10.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE AS 81582/1B:2025-10-23
CONNECTORS, ELECTRIC, BAYONET, COUPLING, UMBILICAL RECEPTACLE, JAM NUT MOUNTING, RFI SHIELDED, CRIMP CONTACT, CLASS E (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 81582/5B:2025-10-23
CONNECTOR ADAPTER, RIGHT ANGLE, RFI SHIELDED, ELECTRIC CONNECTOR TO ELECTRIC CONNECTOR (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 81582D:2025-10-23
Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification For (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu139,00 € -
SAE J 3315:2025-10-23
LTE-V2X Requirements and Deployment Profile for Aftermarket V2X Devices
23.10.2025 - PDF - Englisch - SAE
mehr dazu120,00 € -
SAE AMS 6250P:2025-10-23
Steel Bars, Forgings, Mechanical Tubing, and Forging Stock, 1.5Cr - 3.5Ni (0.07 - 0.13 C) (3310), Aircraft Quality
23.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 6263P:2025-10-23
Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315), Aircraft Quality
23.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AS 81582/4B:2025-10-23
CONNECTOR ADAPTER, RFI SHIELDED, CABLE TO ELECTRIC CONNECTOR (Stabilized: Oct 2025)
23.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AMS 7271K:2025-10-22
Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 - 70 Type “A” Hardness For Seals in Fuel Systems
22.10.2025 - PDF - Englisch - SAE
mehr dazu104,00 € -
SAE J 1095:2025-10-22
Fatigue Test Procedures: Hubs and Wheels for Demountable Rims
22.10.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
73,00 € -
SAE AIR 1076A:2025-10-21
Aircraft Fire Protection for Reciprocating and Gas Turbine Engine Installations (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu142,00 € -
SAE AIR 1262A:2025-10-21
Aircraft Fire Protection for Helicopter Gas Turbine Powerplant and Related Systems Installations (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu132,00 € -
SAE AS 1066C:2025-10-21
Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE AS 21230B:2025-10-21
BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING PTFE LINED, WIDE (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 21232B:2025-10-21
BEARING, PLAIN, SELF-ALIGNING, GROOVE OUTER RING, PTFE LINED, NARROW (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 4697C:2025-10-21
FITTING END, INTEGRAL CENTERED WELD LIP, DESIGN STANDARD (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 4751/1A:2025-10-21
COUPLING, SHEET METAL, 40° V-BAND, WIDE, STANDARD LATCH (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
49,00 € -
SAE AS 4751/3A:2025-10-21
FLANGE END, SOLID, WIDE DESIGN STANDARD (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 4751A:2025-10-21
Coupling Assembly, V-Band Sheet Metal Wide Flange, Pneumatic Tube (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu122,00 € -
SAE AS 4882B:2025-10-21
CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRE (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 5039A:2025-10-21
FITTING, BODY END - THREADED COUPLING, RIGID, SELF-BONDING, DESIGN STANDARD (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 5104B:2025-10-21
Plugs, Port Connection, Ring Locked, AS1300 Port, Installation and Removal of (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AS 8943A:2025-10-21
Bearings, Sleeve, Plain and Flanged, Self-Lubricating -65 to +250 °F (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu95,00 € -
SAE AS 1214C:2025-10-21
Minimum Standards for Valve, High Pressure Oxygen, Line Shut Off, Manually Operated (Stabilized: Oct 2025)
21.10.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
180,00 €
-
SAE AMS 4596C:2025-10-20
Copper Nickel Tin Alloy, Bars and Rods, 77Cu - 15Ni - 8Sn, Solution Annealed and Spinodal Hardened (TX02, formerly TX00)
20.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE AMS 4910T:2025-10-20
Titanium Alloy, Sheet, Strip, and Plate, 5Al - 2.5Sn, Annealed
20.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 6422M:2025-10-20
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (98BV40 Mod), Aircraft Quality
20.10.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
56,00 € -
68,00 € -
SAE AS 5259/6C:2025-10-20
CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES
20.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 81824/11A:2025-10-20
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, NI/CU, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 200 °C MAX, 1X1 SEALANT OPENING
20.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 85049/10D:2025-10-20
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
20.10.2025 - PDF - Englisch - SAE
mehr dazu95,00 € -
SAE AS 85049/11E:2025-10-20
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
20.10.2025 - PDF - Englisch - SAE
mehr dazu93,00 € -
86,00 € -
SAE AMS 4928X:2025-10-20
Titanium Alloy Bars, Wire, Forgings, Flash-Welded Rings, and Drawn Shapes, 6Al - 4V Annealed
20.10.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AMS 4461C:2025-10-16
Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Sheet and Plate), Annealed, or when specified, “As Fabricated” (2024-F)
16.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 5854D:2025-10-16
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or Vacuum Induction Melted, Solution Heat Treated
16.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AS 8056A:2025-10-16
Minimum Design and Performance of Airplane Galley In-Flight Carts, Containers, and Associated Components
16.10.2025 - PDF - Englisch - SAE
mehr dazu128,00 € -
111,00 € -
SAE AMS 4449:2025-10-16
Aluminum Alloy, Sheet and Plate, 2.95Cu - 0.75Li - 0.50Mg - 0.30Mn - 0.18Ag (2074-T8), Solution Heat Treated, Stress Relieved, and Artificially Aged
16.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AIR 5784A:2025-10-15
Literature on Gas Turbine Engine Lubricant Composition and Degradation Relevant to Cabin Air Quality
15.10.2025 - PDF - Englisch - SAE
mehr dazu104,00 € -
SAE AMS 2242H:2025-10-15
Tolerances, Corrosion- and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
15.10.2025 - PDF - Englisch - SAE
mehr dazu104,00 € -
SAE AMS 5508H:2025-10-15
Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 13Cr - 2.0Ni - 3.0W (Greek Ascoloy), Annealed
15.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AMS 5696F:2025-10-15
Steel, Corrosion- and Heat-Resistant, Welding Wire, 19Cr - 12.5Ni - 2.5Mo (316L)
15.10.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AMS 5950E:2025-10-15
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet and Strip, 52.5Ni - 19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718SPF), Vacuum Induction and Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable
15.10.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE J 1131:2025-10-15
Performance Requirements for SAE J844 Nonmetallic Air Brake Tubing and SAE J246 Compression Fitting Assemblies Used in Vehicular Air Brake Systems
15.10.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
122,00 € -
SAE J 2417:2025-10-15
Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment
15.10.2025 - PDF - Englisch - SAE
mehr dazu104,00 € -
SAE AS 5506/3:2025-10-13
Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex
13.10.2025 - PDF - Englisch - SAE
mehr dazu135,00 € -
SAE AS 5506/4:2025-10-13
Architecture Analysis & Design Language (AADL) Annex F: AADL Annex for the FACE™ Technical Standard Edition 3.0
13.10.2025 - PDF - Englisch - SAE
mehr dazu140,00 € -
SAE ARP 4148C:2025-10-10
Gas Turbine Engine Real Time Performance Model Presentation
10.10.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AS 5506/1A:2025-10-10
SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: ARINC653 Annex, Annex C: Code Generation Annex, Annex E: Error Model Annex
10.10.2025 - PDF - Englisch - SAE
mehr dazu165,00 € -
SAE AS 5506/2:2025-10-10
SAE Architecture Analysis and Design Language (AADL) Annex Volume 2:Annex B: Data Modeling AnnexAnnex D: Behavior Model AnnexAnnex F: ARINC653 Annex
10.10.2025 - PDF - Englisch - SAE
mehr dazu154,00 € -
SAE AS 18121B:2025-10-03
FERRULES, OUTER, INSULATED, SHIELD TERMINATING, TYPE II TWO-PIECE, CLASS I, FOR SHIELDED CABLE
03.10.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 22520/44A:2025-10-03
CRIMPING TOOL, TYPE II, WIRE HEATLESS TERMINATION, HAND ACTUATED, WIRE SIZES 26-12
03.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE AMS 4260H:2025-10-03
Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat Treated
03.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 5500H:2025-10-03
Steel, Corrosion-Resistant, Laminated, Sheet, Surface Bonded (SAE 302)
03.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5762H:2025-10-03
Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S (203 EZ), Free Machining, Solution Heat Treated
03.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE AMS 5794G:2025-10-03
Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155), Annealed
03.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE J 3011:2025-10-03
Measurement and Characterization of Electronically Controlled Driveline Clutch Systems
03.10.2025 - PDF - Englisch - SAE
mehr dazu109,00 € -
SAE ARP 6807A:2025-10-02
Guide for Identification of Terminal Lugs in Electrical Wiring Interconnect Systems (EWIS)
02.10.2025 - PDF - Englisch - SAE
mehr dazu111,00 € -
SAE ARP 7503:2025-10-02
Methods of Shield Termination for Two-Piece, Crimp-Style Ferrule on Shielded Cables
02.10.2025 - PDF - Englisch - SAE
mehr dazu99,00 € -
SAE AMS 4186F:2025-10-02
Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F), As Fabricated, or When Specified, Annealed (7075-O)
02.10.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE AMS 4731E:2025-10-02
Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant, 67Ni - 31Cu (Monel® 400), Annealed
02.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5810C:2025-10-02
Steel, Corrosion- and Heat-Resistant, Flat Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286), 1800 °F (982 °C) Solution Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode Remelted
02.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 6907D:2025-10-02
Titanium Alloy Bars and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, Duplex Annealed
02.10.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
49,00 € -
62,00 € -
118,00 € -
95,00 € -
SAE J 3303:2025-10-02
Lithium and Lithium-Ion Cell and Battery Containment Performance Recommended Practice
02.10.2025 - PDF - Englisch - SAE
mehr dazu95,00 € -
SAE AS 4383E:2025-10-02
FITTING ASSEMBLY, REDUCER RING LOCKED PORT CONNECTION TO BEAM SEAL, 5000 PSI /8/
02.10.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AMS 4433:2025-10-02
Aluminum Alloy, Plate (7140-T7351), 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr, Solution Heat Treated, Stress Relieved, and Overaged
02.10.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
333,00 €
-
73,00 € -
SAE AMS 4291K:2025-09-27
Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast (Stabilized: Sep 2025)
27.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AS 4510/1A:2025-09-27
Fittings, Weld to 24° Cone Flareless, Fluid Connection (Stabilized: Sep 2025)
27.09.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 4658A:2025-09-27
FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD (Stabilized: Sep 2025)
27.09.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 4659B:2025-09-27
FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD (Stabilized: Sep 2025)
27.09.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
49,00 € -
68,00 € -
SAE AS 8017D:2025-09-25
Minimum Performance Standard for Anticollision Light Systems
25.09.2025 - PDF - Englisch - SAE
mehr dazu93,00 € -
SAE AMS 5652K:2025-09-25
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Stock for Forgings and Rings, 25Cr - 20Ni - 2.0Si (314), Solution Heat Treated
25.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5743L:2025-09-25
Steel, Corrosion- and Heat-Resistant, Bars, Forgings and Forging Stock, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N (AM 355®), Consumable Electrode Remelted, Solution Heat Treated, Subzero Cooled, Equalized, and Over-Tempered
25.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 6277K:2025-09-25
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Premium Aircraft Quality, Vacuum Arc or Electroslag Remelted
25.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE J 1424:2025-09-25
Cargo Lamp for Use on Vehicles Under 5443 kg (12000 pounds) GVWR
25.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
77,00 € -
113,00 € -
SAE J 3161/1:2025-09-25
Onboard System Requirements for LTE-V2X V2V Safety Communications
25.09.2025 - PDF - Englisch - SAE
mehr dazu149,00 € -
SAE J 3161:2025-09-25
LTE Vehicle-to-Everything (LTE-V2X) Deployment Profiles and Radio Parameters for Single Radio Channel Multi-Service Coexistence
25.09.2025 - PDF - Englisch - SAE
mehr dazu153,00 € -
SAE J 3171:2025-09-25
Identifying Automated Driving Systems-Dedicated Vehicles (ADS-DVs) Passenger Issues for Persons with Disabilities
25.09.2025 - PDF - Englisch - SAE
mehr dazu125,00 € -
122,00 € -
SAE AMS 7490R:2025-09-23
Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel or Cobalt Alloys, or Precipitation-Hardenable Alloys
23.09.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
SAE AMS 7493L:2025-09-23
Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels
23.09.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
124,00 € -
SAE AIR 5552A:2025-09-23
Development and Qualification of Composite Landing Gears
23.09.2025 - PDF - Englisch - SAE
mehr dazu114,00 € -
86,00 € -
SAE AMS 4217K:2025-09-23
Aluminum Alloy, Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat Treated
23.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 4280K:2025-09-23
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.5Mg (355.0-T71), Solution Heat Treated and Overaged
23.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 6412R:2025-09-23
Steel, Bars, Forgings and Forging Stock, 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337), Aircraft Quality
23.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE J 2707:2025-09-23
Wear Test Procedure on Inertia Dynamometer for Brake Friction Materials
23.09.2025 - PDF - Englisch - SAE
mehr dazu99,00 € -
SAE J 3190:2025-09-23
Brake Inertia Dynamometer Test for Corrosion Effects on Friction Couple Behavior
23.09.2025 - PDF - Englisch - SAE
mehr dazu128,00 € -
SAE AMS 2759/4D:2025-09-18
Heat Treatment Austenitic Corrosion-Resistant Steel Parts
18.09.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
62,00 € -
SAE ARP 1532B:2025-09-18
Aircraft Oxygen System Lines, Fabrication, Test, and Installation
18.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
82,00 € -
SAE AMS 5629/H 950A:2025-09-18
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H950) (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5934/H 950A:2025-09-18
Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardened (H950) (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AS 392D:2025-09-18
Altimeter, Pressure Actuated Sensitive Type (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AS 4488A:2025-09-18
Tubular Assemblies, Fusion Welded, Inspection Processes and Acceptance Standards For (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu120,00 € -
SAE AS 4604C:2025-09-18
Hose Assembly, 3000 psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu116,00 € -
SAE AS 5395A:2025-09-18
Health and Usage Monitoring System Data Interchange Specification (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu164,00 € -
SAE AS 83519/5B:2025-09-18
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PREINSTALLED BRAID, NI PLATED, CLASS 1, ROHS (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 95234/10A:2025-09-18
PROTECTIVE COVER, CONNECTOR PLUG, REVERSE BAYONET COUPLING (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 95234/12A:2025-09-18
CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING, DUMMY STOWAGE (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE AS 95234/13A:2025-09-18
CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING, BULKHEAD FEED-THRU (Stabilized: Sep 2025)
18.09.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE J 1995:2025-09-18
Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power and Torque Rating
18.09.2025 - PDF - Englisch - SAE
mehr dazu122,00 € -
95,00 € -
49,00 € -
SAE AMS 4290N:2025-09-17
Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast (Stabilized: Sep 2025)
17.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 4471C:2025-09-17
Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated (Stabilized: Sep 2025)
17.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AMS 4917L:2025-09-17
Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated (Stabilized: Sep 2025)
17.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AMS 5622/H 900A:2025-09-17
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H900) (Stabilized: Sep 2025)
17.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5622/H 925A:2025-09-17
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardened (H925) (Stabilized: Sep 2025)
17.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AS 7140:2025-09-16
Common, Open Data Exchange Format for Rotorcraft Health and Usage Monitoring Systems (CODEX-HUMS)
16.09.2025 - PDF - Englisch - SAE
mehr dazu225,00 € -
SAE ARP 6621:2025-09-15
Predicting Photometric Degradation of Exterior Aircraft Lights
15.09.2025 - PDF - Englisch - SAE
mehr dazu95,00 € -
SAE J 3097Z26:2025-09-15
DRAFT - Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard
15.09.2025 - PDF - Englisch - SAE
mehr dazu68,00 € -
62,00 € -
SAE AMS 4215K:2025-09-12
Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), Solution and Precipitation Heat Treated
12.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 4281H:2025-09-12
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat Treated
12.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 4975R:2025-09-12
Titanium Alloy, Bars, Wire, and Rings, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si, Solution and Precipitation Heat Treated
12.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 4976N:2025-09-12
Titanium Alloy, Forgings, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si, Solution and Precipitation Heat Treated
12.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5388L:2025-09-12
Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast
12.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AMS 6312L:2025-09-12
Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640), Aircraft Quality
12.09.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE AMS 6421J:2025-09-12
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37), Aircraft Quality
12.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE J 3101-5:2025-09-12
Hardware Protected Security Environment - GlobalPlatform Technologies Information Report
12.09.2025 - PDF - Englisch - SAE
mehr dazu125,00 € -
SAE AMS 2759/12C:2025-09-10
Automated Gaseous Nitrocarburizing Controlled by Potentials
10.09.2025 - PDF - Englisch - SAE
mehr dazu99,00 € -
SAE AMS 3819E:2025-09-10
Cloths, Cleaning, For Aircraft Primary and Secondary Structural Surfaces
10.09.2025 - PDF - Englisch - SAE
mehr dazu99,00 € -
SAE AMS 4229H:2025-09-10
Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7), Solution Heat Treated and Overaged
10.09.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
SAE AMS 4880E:2025-09-10
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings, 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe, Quench Hardened and Temper Annealed (TQ50)
10.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 5622H:2025-09-10
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forging, Rings and Heading, 16Cr - 4.0Ni - 0.30Cb - 4.0Cu (17-4 PH®), Solution Heat Treated, Precipitation Hardenable, Premium Aircraft Quality, Consumable Electrode Remelted
10.09.2025 - PDF - Englisch - SAE
mehr dazu86,00 € -
SAE AMS 5638H:2025-09-10
Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock, 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303 MA), Free-Machining, Swaging or Upsetting, Solution Heat Treated
10.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5790F:2025-09-10
Steel, Corrosion- and Heat-Resistant, Welding Wire, 20Cr - 10Ni - 0.75Cb (347), High Ferrite Grade
10.09.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 6477E:2025-09-10
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr (0.90 - 1.03C), For Bearing Applications
10.09.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
116,00 € -
120,00 € -
SAE AS 1503B:2025-09-09
HOSE, AIR DUCT, FLEXIBLE, HELICAL, METALLIC WIRE, SUPPORTED (COVERED), SELF-EXTINGUISHING
09.09.2025 - PDF - Englisch - SAE
mehr dazu49,00 € -
SAE AS 21439E:2025-09-09
BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, INCH
09.09.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
180,00 €
-
SAE J 3176:2025-09-03
Cable Marking for Circuit Identification in Multi-Voltage Power Distribution Systems
03.09.2025 - PDF - Englisch - SAE
mehr dazu62,00 € -
SAE J 1634:2025-08-29
Battery Electric Vehicle Energy Consumption and Range Test Procedure
29.08.2025 - PDF - Englisch - SAE
mehr dazu180,00 € -
SAE AS 85049/87E:2025-08-25
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
25.08.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 85049/88E:2025-08-25
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
25.08.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 85049/89E:2025-08-25
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
25.08.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AS 85049/90E:2025-08-25
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
25.08.2025 - PDF - Englisch - SAE
mehr dazu56,00 € -
SAE AMS 4261H:2025-08-22
Aluminum Alloy Castings, Investment, 7.0Si - 0.32Mg (356.0-T51), Precipitation Heat Treated
22.08.2025 - PDF - Englisch - SAE
mehr dazu77,00 € -
SAE AMS 5070L:2025-08-22
Steel, Bars, Forgings and Forging Stock, 0.18 - 0.23C (SAE 1022)
22.08.2025 - PDF - Englisch - SAE
mehr dazu73,00 € -
SAE AMS 5396G:2025-08-22
Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV and Hastelloy® B), As-Cast
22.08.2025 - PDF - Englisch - SAE
mehr dazu82,00 € -
95,00 € -
89,00 € -
SAE ARP 4493B:2025-08-22
Recommended Design and Test Requirements for Direct Drive Servovalves
22.08.2025 - PDF - Englisch - SAE
mehr dazu149,00 € -
SAE ARP 5151B:2025-08-22
Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service
22.08.2025 - PDF - Englisch - SAE
mehr dazu95,00 €
