AENOR
-
UNE 41805-10:2025
Building diagnosis. Part 10: Pathological study of the building. Nonstructural facades.
30.12.2025 - PDF - Spanisch - AENOR
mehr dazu93,00 € -
UNE-EN 12259-15:2025
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 15: Spray pattern sprinklers with a k-factor of at least K160, extended coverage sprinklers of at least K80 and control mode special application sprinklers
30.12.2025 - - - AENOR
mehr dazuVon: 129,00 € -
UNE-EN 12309-6:2025
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances
30.12.2025 - - - AENOR
mehr dazuVon: 101,00 € -
UNE-EN 12900:2025
Refrigerant compressors - Rating conditions, tolerances and presentation of performance data
30.12.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 15347-2:2025
Plastics - Sorted plastics wastes - Part 2: Quality grades of sorted Polyethylene (PE) wastes and specific test methods
30.12.2025 - - - AENOR
mehr dazuVon: 73,00 € -
UNE-EN 15347-3:2025
Plastics - Sorted plastics wastes - Part 3: Quality grades of sorted Polypropylene (PP) wastes and specific test methods
30.12.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN 15522-2:2024+A1:2025
Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
30.12.2025 - - - AENOR
mehr dazuVon: 188,00 € -
UNE-EN 15751:2025
Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method at 110 °C
30.12.2025 - - - AENOR
mehr dazuVon: 69,00 € -
Von: 78,00 €
-
UNE-EN 16798-3:2025
Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
30.12.2025 - - - AENOR
mehr dazuVon: 129,00 € -
UNE-EN 17188:2025
Materials obtained from End-of-Life Tyres (ELT) - Sampling method for granulates and powders stored in big-bags and small-bags
30.12.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 17189:2025
Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry
30.12.2025 - - - AENOR
mehr dazuVon: 60,00 € -
Von: 131,00 €
-
Von: 126,00 €
-
UNE-EN IEC 61347-2-8:2025
Controlgear for electric light sources - Safety - Part 2-8: Particular requirements - Ballasts for fluorescent lamps
30.12.2025 - - - AENOR
mehr dazuVon: 75,00 € -
UNE-EN IEC 61347-2-10:2025
Controlgear for electric light sources - Safety - Part 2-10: Particular requirements - Electronic controlgear for high-frequency operation of tubular cold-cathode discharge lamps (neon tubes)
30.12.2025 - - - AENOR
mehr dazuVon: 78,00 € -
UNE-EN IEC 61347-2-11:2025
Controlgear for electric light sources - Safety - Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires
30.12.2025 - - - AENOR
mehr dazuVon: 64,00 € -
UNE-EN IEC 61347-2-3:2025
Controlgear for electric light sources - Safety - Part 2-3: Particular requirements - AC or DC supplied electronic controlgear for fluorescent lamps
30.12.2025 - - - AENOR
mehr dazuVon: 94,00 € -
UNE-EN IEC 61347-2-12:2025
Controlgear for electric light sources - Safety - Part 2-12: Particular requirements - DC or AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps)
30.12.2025 - - - AENOR
mehr dazuVon: 71,00 € -
UNE-EN IEC 61347-2-13:2025
Controlgear for electric light sources - Safety - Part 2-13: Particular requirements - Electronic controlgear for LED light sources
30.12.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 10928:2025
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use (ISO 10928:2024)
30.12.2025 - - - AENOR
mehr dazuVon: 77,00 € -
UNE-EN ISO 16276-2:2025
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025)
30.12.2025 - - - AENOR
mehr dazuVon: 62,00 € -
UNE-HD 60364-5-53:2023/AC:2025-07
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
30.12.2025 - - - AENOR
mehr dazu0,00 € -
UNE-EN 71-4:2021+A1:2025
Safety of toys - Part 4: Experimental sets for chemistry and related activities
17.12.2025 - - - AENOR
mehr dazuVon: 86,00 € -
UNE-EN 81-41:2025
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
17.12.2025 - - - AENOR
mehr dazuVon: 149,00 € -
Von: 123,00 €
-
UNE-EN 805:2025
Water supply - Requirements for systems and components outside buildings
17.12.2025 - - - AENOR
mehr dazuVon: 132,00 € -
UNE-EN 901:2025
Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite
17.12.2025 - - - AENOR
mehr dazuVon: 94,00 € -
UNE-EN 1302:2025
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods
17.12.2025 - - - AENOR
mehr dazuVon: 113,00 € -
Von: 85,00 €
-
Von: 69,00 €
-
Von: 69,00 €
-
UNE-EN 12464-2:2025
Light and lighting - Lighting of work places - Part 2: Outdoor work places
17.12.2025 - - - AENOR
mehr dazuVon: 115,00 € -
UNE-EN 12586:2025
Child care articles - Soother holder - Safety requirements and test methods
17.12.2025 - - - AENOR
mehr dazuVon: 116,00 € -
UNE-EN 13016-3:2025
Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple expansion method)
17.12.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 13204:2025
Powered rescue tools for fire and rescue service use - safety and performance requirements
17.12.2025 - - - AENOR
mehr dazuVon: 129,00 € -
UNE-EN 13496:2025
Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for external thermal insulation composite kits with renders (ETIC kits)
17.12.2025 - - - AENOR
mehr dazuVon: 60,00 € -
UNE-EN 14385:2025
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
17.12.2025 - - - AENOR
mehr dazuVon: 129,00 € -
UNE-EN 18080:2025
Glass in building - Reaction to fire - Mounting and fixing instructions for glass products and extended application of test results
17.12.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN IEC 60079-11:2025
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
17.12.2025 - - - AENOR
mehr dazuVon: 190,00 € -
UNE-EN IEC 61347-1:2025
Controlgear for electric light sources - Safety - Part 1: General requirements
17.12.2025 - - - AENOR
mehr dazuVon: 150,00 € -
UNE-EN IEC 61347-2-2:2025
Controlgear for electric light sources - Safety - Part 2-2: Particular requirements - Electronic step-down convertors for filament lamps
17.12.2025 - - - AENOR
mehr dazuVon: 64,00 € -
UNE-EN IEC 61400-15-1:2025
Wind energy generation systems - Part 15-1: Site suitability input conditions for wind power plants
17.12.2025 - - - AENOR
mehr dazuVon: 100,00 € -
UNE-EN ISO 9351:2025
Galvanic anodes for cathodic protection in seawater and saline sediments (ISO 9351:2025)
17.12.2025 - - - AENOR
mehr dazuVon: 105,00 € -
UNE-EN ISO 13855:2025
Safety of machinery - Positioning of safeguards with respect to the approach of the human body (ISO 13855:2024)
17.12.2025 - - - AENOR
mehr dazuVon: 132,00 € -
UNE-EN ISO 17635:2025
Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2025)
17.12.2025 - - - AENOR
mehr dazuVon: 76,00 € -
Von: 129,00 €
-
UNE-EN ISO 22675:2025
Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods (ISO 22675:2024)
17.12.2025 - - - AENOR
mehr dazuVon: 148,00 € -
UNE-EN ISO 10218-2:2025
Robotics - Safety requirements - Part 2: Industrial robot applications and robot cells (ISO 10218-2:2025)
17.12.2025 - - - AENOR
mehr dazuVon: 206,00 € -
UNE-EN 9125:2025
Aerospace series - Quality management systems - Non-deliverable software requirements
10.12.2025 - - - AENOR
mehr dazuVon: 62,00 € -
UNE-EN 13374:2025
Temporary edge protection systems - Product specification - Test methods
10.12.2025 - - - AENOR
mehr dazuVon: 109,00 € -
UNE-EN 14125:2025
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
10.12.2025 - - - AENOR
mehr dazuVon: 89,00 € -
UNE-EN 14349:2025
Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
10.12.2025 - - - AENOR
mehr dazuVon: 91,00 € -
UNE-EN ISO 15883-7:2025
Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-critical thermolabile medical devices and health care equipment (ISO 15883-7:2025)
10.12.2025 - - - AENOR
mehr dazuVon: 98,00 € -
UNE-EN ISO 17831-2:2025
Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2025)
10.12.2025 - - - AENOR
mehr dazuVon: 60,00 € -
UNE-EN ISO 20109:2025
Simultaneous interpreting - Equipment - Requirements (ISO 20109:2025)
10.12.2025 - - - AENOR
mehr dazuVon: 83,00 € -
Von: 89,00 €
-
UNE-EN 17149-3:2025
Railway applications - Strength assessment of rail vehicle structures - Part 3: Fatigue strength assessment based on cumulative damage
10.12.2025 - - - AENOR
mehr dazuVon: 152,00 € -
Von: 154,00 €
-
UNE-EN ISO 4064-2:2025
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2024)
03.12.2025 - PDF - Spanisch - AENOR
mehr dazu155,00 € -
UNE-EN ISO 16187:2025
Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2025)
03.12.2025 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
Von: 140,00 €
-
UNE-EN IEC 61557-13:2025
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
03.12.2025 - - - AENOR
mehr dazuVon: 75,00 € -
UNE-EN IEC 62271-211:2025
High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
03.12.2025 - - - AENOR
mehr dazuVon: 79,00 € -
UNE-EN IEC 61557-16:2025
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment
03.12.2025 - - - AENOR
mehr dazuVon: 76,00 € -
Von: 154,00 €
-
UNE-EN IEC 62305-3:2025
Protection against lightning - Part 3: Physical damage to structures and life hazard
03.12.2025 - - - AENOR
mehr dazuVon: 166,00 € -
UNE-EN ISO 8502-5:2025
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:2025)
03.12.2025 - - - AENOR
mehr dazuVon: 54,00 € -
UNE 170600:2025
Design of pictograms for signing with accessibility criteria.
26.11.2025 - PDF - Spanisch - AENOR
mehr dazu69,00 € -
UNE-EN 14626:2025
Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
26.11.2025 - - - AENOR
mehr dazuVon: 137,00 € -
Von: 77,00 €
-
UNE-EN 17700-2:2025
Plant biostimulants - Claims - Part 2: Nutrient use efficiency resulting from the use of a plant biostimulant
26.11.2025 - - - AENOR
mehr dazuVon: 62,00 € -
UNE-EN 17700-3:2025
Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant
26.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 17700-4:2025
Plant biostimulants - Claims - Part 4: Determination of quality traits resulting from the use of a plant biostimulant
26.11.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN 17700-5:2025
Plant biostimulants - Claims - Part 5: Determination of availability of confined nutrients in the soil or rhizosphere
26.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 17701-1:2025
Plant biostimulants - Determination of specific elements - Part 1: Digestion by aqua regia for subsequent determination of elements
26.11.2025 - - - AENOR
mehr dazuVon: 59,00 € -
UNE-EN 17701-2:2025
Plant biostimulants - Determination of specific elements - Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn
26.11.2025 - - - AENOR
mehr dazuVon: 73,00 € -
UNE-EN 17701-3:2025
Plant biostimulants - Determination of specific elements - Part 3: Determination of mercury
26.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 17702-1:2025
Plant biostimulants - Sampling and sample preparation - Part 1: Sampling
26.11.2025 - - - AENOR
mehr dazuVon: 88,00 € -
UNE-EN 17702-2:2025
Plant biostimulants - Sampling and sample preparation - Part 2: Sample preparation
26.11.2025 - - - AENOR
mehr dazuVon: 60,00 € -
Von: 73,00 €
-
Von: 60,00 €
-
Von: 69,00 €
-
Von: 71,00 €
-
Von: 69,00 €
-
Von: 69,00 €
-
Von: 69,00 €
-
Von: 84,00 €
-
Von: 96,00 €
-
Von: 71,00 €
-
Von: 71,00 €
-
UNE-EN 17714:2025
Plant biostimulants - Determination of microorganisms' concentration
26.11.2025 - - - AENOR
mehr dazuVon: 71,00 € -
Von: 86,00 €
-
Von: 74,00 €
-
Von: 76,00 €
-
Von: 71,00 €
-
Von: 69,00 €
-
Von: 69,00 €
-
UNE-EN 17721:2025
Plant biostimulants - Determination of the pH for liquid microbial plant biostimulants/pH in microbial products - Determination of pH
26.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
Von: 98,00 €
-
Von: 75,00 €
-
UNE-EN 17725:2025
Plant biostimulants - Determination of the quantity (indicated by mass or volume)
26.11.2025 - - - AENOR
mehr dazuVon: 71,00 € -
UNE-EN 17867:2024+A1:2025
Petrol fuel for small internal combustion engines - Requirements and test methods
26.11.2025 - - - AENOR
mehr dazuVon: 62,00 € -
UNE-EN ISO 20768:2022/A1:2025
Vapour products - Routine analytical vaping machine - Definitions and standard conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/Amd 1:2025)
26.11.2025 - - - AENOR
mehr dazuVon: 35,00 € -
Von: 69,00 €
-
UNE 127992-1:2025
Precast concrete products - Wall elements. Part 1: Glass-fibre reinforced cement precast products. National Annex
19.11.2025 - PDF - Spanisch - AENOR
mehr dazu79,00 € -
UNE-EN IEC 62305-1:2025
Protection against lightning - Part 1: General principles
19.11.2025 - PDF - Spanisch - AENOR
mehr dazu129,00 € -
UNE-ISO 48-1:2025
Rubber, vulcanized or thermoplastic. Determination of hardness. Part 1: Introduction and guidance
19.11.2025 - PDF - English, Spanish - AENOR
mehr dazu79,50 € -
UNE-ISO 48-2:2025
Rubber, vulcanized or themoplastic. Determination of hardness. Part 2. Hardness between 10 IRHD and 100 IRHD
19.11.2025 - PDF - English, Spanish - AENOR
mehr dazu115,50 € -
UNE-ISO 48-3:2025
Rubber, vulcanized or themoplastic. Determination of hardness. Part 3. Dead lead hardnnes using the very low rubber hardnnes (VLRH) scale
19.11.2025 - PDF - English, Spanish - AENOR
mehr dazu91,50 € -
UNE-ISO 48-4:2025
Rubber, vulcanized or themoplastic. Determination of hardness. Part 4. Indentation hardness by durometer method (Shore hardness)
19.11.2025 - PDF - English, Spanish - AENOR
mehr dazu103,50 € -
UNE-EN 18027:2025
Bio-based products - Life cycle assessment - Additional requirements and guidelines for comparing the life cycles of bio-based products with their fossil-based equivalents
19.11.2025 - - - AENOR
mehr dazuVon: 123,00 € -
UNE-EN ISO 13433:2025
Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO 13433:2025)
19.11.2025 - - - AENOR
mehr dazuVon: 59,00 € -
UNE-EN ISO 16179:2025
Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials (ISO 16179:2025)
19.11.2025 - - - AENOR
mehr dazuVon: 72,00 € -
UNE-EN ISO 17633:2025
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)
19.11.2025 - - - AENOR
mehr dazuVon: 96,00 € -
UNE-EN ISO 25178-601:2025
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025)
19.11.2025 - - - AENOR
mehr dazuVon: 75,00 € -
UNE-EN ISO 25178-602:2025
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2025)
19.11.2025 - - - AENOR
mehr dazuVon: 74,00 € -
UNE-EN ISO 26304:2025
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2025)
19.11.2025 - - - AENOR
mehr dazuVon: 80,00 € -
UNE-EN 74-1:2022+A1:2025
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
12.11.2025 - - - AENOR
mehr dazuVon: 100,00 € -
UNE-EN 868-2:2025
Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
12.11.2025 - - - AENOR
mehr dazuVon: 79,00 € -
UNE-EN 868-3:2025
Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
12.11.2025 - - - AENOR
mehr dazuVon: 76,00 € -
UNE-EN 868-6:2025
Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
12.11.2025 - - - AENOR
mehr dazuVon: 75,00 € -
UNE-EN 868-4:2025
Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
12.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 868-7:2025
Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
12.11.2025 - - - AENOR
mehr dazuVon: 85,00 € -
UNE-EN 1482-1:2025
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 1: General sampling provisions
12.11.2025 - - - AENOR
mehr dazuVon: 111,00 € -
UNE-EN 1482-2:2025
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 2: General sample preparation provisions
12.11.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN 1482-3:2025
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 3: Sampling of static heaps
12.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 14180:2025
Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
12.11.2025 - - - AENOR
mehr dazuVon: 154,00 € -
UNE-EN 14625:2025
Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
12.11.2025 - - - AENOR
mehr dazuVon: 150,00 € -
UNE-EN 15004-1:2025
Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2023, modified)
12.11.2025 - - - AENOR
mehr dazuVon: 154,00 € -
UNE-EN 16511:2023+A1:2025
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
12.11.2025 - - - AENOR
mehr dazuVon: 64,00 € -
UNE-EN 16668:2025
Industrial valves - Requirements and testing for metallic valves as pressure accessories
12.11.2025 - - - AENOR
mehr dazuVon: 97,00 € -
UNE-EN IEC 60704-2-10:2025
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens
12.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 7376:2021/A1:2025
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation - Amendment 1: Clarification of optical output and illumination requirements (ISO 7376:2020/Amd 1:2025)
12.11.2025 - - - AENOR
mehr dazuVon: 35,00 € -
UNE-EN ISO 8611-1:2025
Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2025)
12.11.2025 - - - AENOR
mehr dazuVon: 90,00 € -
UNE-EN ISO 8611-2:2025
Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2025)
12.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 14155:2021/A11:2025
Clinical investigation of medical devices for human subjects - Good clinical practice
12.11.2025 - - - AENOR
mehr dazuVon: 59,00 € -
UNE-EN ISO 23649:2025
Chemicals for the leather tanning industry - Determination of cyclosiloxanes (ISO 23649:2025)
12.11.2025 - - - AENOR
mehr dazuVon: 64,00 € -
UNE-EN ISO 14119:2025
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2024)
12.11.2025 - - - AENOR
mehr dazuVon: 154,00 € -
UNE 40204:2025
Textiles. Test method for determining the alkaline solubility of wool
05.11.2025 - PDF - Spanisch - AENOR
mehr dazu47,00 € -
UNE 40205:2025
Textiles. Test method for determining the solubility of wool in urea-bisulfite.
05.11.2025 - PDF - Spanisch - AENOR
mehr dazu47,00 € -
UNE-EN 514:2025
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
05.11.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN 1254-3:2022+A1:2025
Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes
05.11.2025 - - - AENOR
mehr dazuVon: 85,00 € -
UNE-EN 1254-6:2022+A1:2025
Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes
05.11.2025 - - - AENOR
mehr dazuVon: 80,00 € -
UNE-EN 1254-8:2022+A1:2025
Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes
05.11.2025 - - - AENOR
mehr dazuVon: 84,00 € -
UNE-EN 1254-20:2022+A1:2025
Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
05.11.2025 - - - AENOR
mehr dazuVon: 118,00 € -
UNE-EN 1705:2025
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
05.11.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN 12106:2025
Plastics piping systems - Polyethylene (PE), crosslinked polyethylene (PE-X) and unplasticized polyamide (PA-U) pipes - Test method for the resistance to internal pressure after application of squeeze-off
05.11.2025 - - - AENOR
mehr dazuVon: 59,00 € -
UNE-EN 12845-2:2025
Fixed firefighting systems - Automatic sprinkler systems - Part 2: Design and installation of ESFR and CMSA sprinkler systems
05.11.2025 - - - AENOR
mehr dazuVon: 118,00 € -
UNE-EN 12978:2025
Industrial, commercial and garage doors and gates and pedestrian doorsets - Protective devices for power operated doors and gates - Requirements and test methods
05.11.2025 - - - AENOR
mehr dazuVon: 81,00 € -
UNE-EN 13126-9:2025
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows
05.11.2025 - - - AENOR
mehr dazuVon: 77,00 € -
UNE-EN 14361:2025
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
05.11.2025 - - - AENOR
mehr dazuVon: 60,00 € -
UNE-EN 14750:2025
Railway applications - Air conditioning for urban, suburban and regional rolling stock: Comfort parameters and type tests
05.11.2025 - - - AENOR
mehr dazuVon: 140,00 € -
Von: 99,00 €
-
UNE-EN 17450-3:2025
Fixed firefighting systems - Components for water mist systems - Part 3: Requirements and test methods for check valves
05.11.2025 - - - AENOR
mehr dazuVon: 58,00 € -
UNE-EN 17978:2025
Products used for treatment of water intended for human consumption and swimming pool water - Glass beads and glass granulate
05.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 1628-1:2025
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2024)
05.11.2025 - - - AENOR
mehr dazuVon: 82,00 € -
UNE-EN ISO 3451-5:2025
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN ISO 3506-3:2025
Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes (ISO 3506-3:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 3506-4:2025
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes (ISO 3506-4:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 72,00 € -
UNE-EN ISO 4064-1:2025
Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2024)
05.11.2025 - - - AENOR
mehr dazuVon: 118,00 € -
UNE-EN ISO 8407:2021/A1:2025
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens - Amendment 1 (ISO 8407:2021/Amd 1:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 35,00 € -
UNE-EN ISO 9038:2025
Determination of sustained combustibility of liquids (ISO 9038:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 10350-1:2025
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 16834:2025
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 74,00 € -
UNE-EN ISO 21952:2025
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2025)
05.11.2025 - - - AENOR
mehr dazuVon: 77,00 € -
UNE-EN 14960-4:2025
Inflatable play equipment - Part 4: Additional safety requirements and test methods for bungee runs
05.11.2025 - - - AENOR
mehr dazuVon: 61,00 € -
UNE-EN 71-15:2025
Safety of toys – Part 15: Formamide in foam toy materials (content)
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 71-16:2025
Safety of toys – Part 16: Certain chlorinated phosphorus flame retardants (TCEP, TCPP, TDCP) in toy materials
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 71-17:2025
Safety of toys - Part 17: Certain isothiazolinones (MIT, CIT, BIT) in aqueous toy materials
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 1364-6:2025
Fire resistance tests for non-loadbearing elements - Part 6: Open-state cavity barriers
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 12953-9:2025
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
29.10.2025 - - - AENOR
mehr dazuVon: 103,00 € -
UNE-EN 12965:2020+A1:2025
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
29.10.2025 - - - AENOR
mehr dazuVon: 94,00 € -
UNE-EN 13828:2025
Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
29.10.2025 - - - AENOR
mehr dazuVon: 79,00 € -
UNE-EN 13806-1:2025
Foodstuffs - Determination of trace elements - Part 1: Determination of total mercury in foodstuffs by atomic absorption spectrometry (AAS) - cold vapour technique after pressure digestion
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 13806-2:2025
Foodstuffs - Determination of trace elements - Part 2: Determination of total mercury in foodstuffs by atomic fluorescence spectrometry (AFS) - Cold vapour technique after pressure digestion
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN 13806-3:2025
Foodstuffs - Determination of trace elements - Part 3: Determination of total mercury in foodstuffs with atomic absorption directly from the foodstuff (elemental mercury analysis)
29.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN IEC 61400-3-2:2025
Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines
29.10.2025 - - - AENOR
mehr dazuVon: 178,00 € -
UNE-EN ISO 14343:2025
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2025)
29.10.2025 - - - AENOR
mehr dazuVon: 77,00 € -
UNE-EN ISO 20537:2025
Footwear - Identification of defects during visual inspection - Vocabulary (ISO 20537:2025)
29.10.2025 - - - AENOR
mehr dazuVon: 85,00 € -
UNE-EN ISO 15883-1:2025
Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2024)
22.10.2025 - - - AENOR
mehr dazuVon: 134,00 € -
UNE-EN ISO 15883-2:2025
Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for critical and semi-critical medical devices (ISO 15883-2:2024)
22.10.2025 - - - AENOR
mehr dazuVon: 78,00 € -
UNE-EN ISO 15883-3:2025
Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2024)
22.10.2025 - - - AENOR
mehr dazuVon: 73,00 € -
UNE-EN ISO 23779:2025
Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024)
22.10.2025 - - - AENOR
mehr dazuVon: 96,00 € -
Von: 78,00 €
-
Von: 126,00 €
-
UNE-EN 14212:2025
Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
22.10.2025 - - - AENOR
mehr dazuVon: 154,00 € -
0,00 €
-
UNE-EN 15491:2025
Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
22.10.2025 - - - AENOR
mehr dazuVon: 54,00 € -
UNE-EN IEC 60422:2025
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
22.10.2025 - - - AENOR
mehr dazuVon: 129,00 € -
UNE-EN ISO 5801:2019/A1:2025
Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/Amd 1:2025)
22.10.2025 - - - AENOR
mehr dazuVon: 62,00 € -
UNE-EN ISO 8502-15:2025
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020)
22.10.2025 - - - AENOR
mehr dazuVon: 69,00 € -
UNE-EN ISO 9466:2025
Railway Applications - Coating of passenger rail vehicle (ISO 9466:2025)
22.10.2025 - - - AENOR
mehr dazuVon: 109,00 € -
UNE-EN ISO 10993-4:2018/A1:2025
Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood - Amendment 1 (ISO 10993-4:2017/Amd 1:2025, Corrected version 2025-04)
22.10.2025 - - - AENOR
mehr dazuVon: 62,00 € -
UNE-EN ISO 10993-5:2009/A11:2025
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity
22.10.2025 - - - AENOR
mehr dazuVon: 40,00 € -
UNE-EN ISO 11118:2025
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2025)
22.10.2025 - - - AENOR
mehr dazuVon: 96,00 € -
UNE-EN 126:2025
Safety and control devices for burners and appliances burning gaseous fuels - Multifunctional controls
15.10.2025 - - - AENOR
mehr dazuVon: 79,00 € -
UNE-EN 1366-3:2023+A1:2025/AC:2025
Fire resistance tests for service installations - Part 3: Penetration seals
15.10.2025 - - - AENOR
mehr dazu0,00 € -
UNE-EN 1680:2025
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
15.10.2025 - - - AENOR
mehr dazuVon: 58,00 € -
UNE-EN 1846-2:2025
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
15.10.2025 - - - AENOR
mehr dazuVon: 129,00 €
