| Name | Unterstützung | Language | Verfügbarkeit | Datum der Ausstellung | Preis | ||
|---|---|---|---|---|---|---|---|
|
PDF |
Englisch |
gültig |
20.11.2025 |
54,00 € |
|
||
|
Papier |
Englisch |
gültig |
20.11.2025 |
68,00 € |
|
||
Details
Revision Standard - Active.
The test parameters and acceptance criteria for voltage-endurance testing of form-wound bars and coils for use in large hydro generators are covered in this standard.
This standard applies to voltage-endurance testing of form-wound stator winding bars and coils having a mica-based insulation system with thermo-setting polyester and/or epoxy resins used in hydro generators and pumped storage generators operating in air with a rated line-to-line voltage above 4000 V and a frequency of 50 Hz or 60 Hz..
The purpose of this standard is to define the test parameters for the voltage-endurance test and the number of specimens to be used for each test. It also defines the acceptance criteria and the procedures for retesting in the event of a premature failure during the voltage-endurance test. The details of the test procedure are described in IEEE Std 1043™, Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils.
Zusätzliche Information
| Autor | Institute of Electrical and Electronics Engineers (IEEE) |
|---|---|
| Komitee | Electric Machinery |
| Veröffentlicht von | IEEE |
| Document type | Normen |
| Ausgabe | |
| EAN ISBN | 979-8-8557-2399-1 |
| ICS | 17.220.20 : Messung elektrischer und magnetischer Größen
|
| Seitenzahl | 20 |
| Ersetzt | IEEE 1553:2002 (R2007) |
| Schlagwort | IEEE 1553-2025 |
