IEEE 1193:2022

IEEE 1193:2022

IEEE Guide for Measurement of Environmental Sensitivities of Standard Frequency Generators

Verfügbarkeit: Auf Lager

96,00 €
Benachrichtigen Sie mich , wenn das Produkt Nachrichten

Details

Revision Standard - Active.
Guidelines for the measurement and specification of environmental sensitivities of frequency standards and references are presented, including considerations specific to a variety of atomic and mechanical frequency sources.

The basic principle governing the physical measurement of time is demarcation of equal time intervals by observation of a repeating process such as oscillations of a quartz crystal or of the electromagnetic field that excites a transition in an atom (e.g., cesium). Such a repeating periodic process can be used as a frequency standard. Frequency standards include atomic frequency standards, laser and cavity resonators, and mechanical oscillators [including, e.g., quartz, dielectric resonator (DROs), cryogenic sapphire, micro-electro-mechanical system (MEMS), and thin-film resonator (TFR) oscillators]. All types of frequency standards can be influenced by environmental sensitivities. The following three different areas of concern exist for the environmental testing and specifications of frequency standards: a) Fitness of a frequency standard for actual user needs in specific environments (tests attempt to mimic the anticipated environments) b) Characterization of a frequency standard's environmental sensitivities (tests attempt to provide distinct sensitivity coefficients for variations in independent environmental parameters) c) Reliability and survival (tests attempt to stress the unit by either going to extremes of operating ranges or by repeated application of stimuli, e.g., cycling) This document puts emphasis on item b). It provides guidance and a conceptual framework rather than a prescription of procedures that must be followed. It emphasizes proper methodology and practice and cautions against pitfalls. In summary, this IEEE guide is not a specification document but a resource document for deriving specification statements. This document often refers to the influence of random frequency fluctuations on the measurement and characterization of environmental sensitivities. Readers unfamiliar with frequency fluctuations, phase noise, and Allan deviations should refer to IEEE Std 1139.
This document describes the nature of the environmental effects, as well as the test methods to evaluate, quantify, and report (i.e., in specifications) the sensitivity of a frequency standard's output frequency to environmental influences such as magnetic fields, atmospheric pressure, humidity, vibration, acceleration, temperature, ionizing radiation, and intermittent operation. Its primary purpose is to aid in defining specifications and to verify specified performance through measurement. In addition, this document will help to assure consistency and repeatability of environmental sensitivity measurements, as well as the use of consistent methods across the various segments of the time and frequency community.

Zusätzliche Information

Autor Institute of Electrical and Electronics Engineers (IEEE)
Komitee IEEE Ultrasonics, Ferroelectrics and Frequency Control
Veröffentlicht von IEEE
Document type Normen
Ausgabe
EAN ISBN 978-1-5044-9574-5
ICS 29.160.20 : Generatoren
Seitenzahl 87
Ersetzt IEEE 1193:2003
Schlagwort IEEE 1193-2022
Bestellformular