93.025 : Externe Wasserförderanlagen
-
BS EN 16941-1:2024 + Redline
Tracked Changes. On-site non-potable water systems Systems for the use of rainwater
03.04.2024 - PDF - Englisch - BSI
mehr dazu382,00 € -
BS EN 16941-1:2024
On-site non-potable water systems Systems for the use of rainwater
22.03.2024 - PDF - Englisch - BSI
mehr dazu293,00 € -
NBN EN 16941-1:2024
Réseaux d’eau non potable sur site - Partie 1 : Systèmes pour l’utilisation de l’eau de pluie
20.03.2024 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN EN 16941-1:2024
Vor-Ort-Anlagen für Nicht-Trinkwasser - Teil 1: Anlagen für die Verwendung von Regenwasser
20.03.2024 - PDF - Deutsche - NBN
mehr dazu163,00 € -
NBN EN 16941-1:2024
On-site non-potable water systems - Part 1: Systems for the use of rainwater
20.03.2024 - PDF - Englisch - NBN
mehr dazu163,00 € -
BS ISO 24512:2024 + Redline
Tracked Changes. Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
13.03.2024 - PDF - Englisch - BSI
mehr dazu454,00 € -
BS ISO 24512:2024
Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
08.03.2024 - PDF - Englisch - BSI
mehr dazu348,00 € -
DIN 3630:2024-03
Shut-off valves, check valves, air supply/exhaust valves and control valves made of metallic materials for potable water supply systems - Requirements and test methods
01.03.2024 - PDF - Deutsche - DIN
mehr dazu52,90 € -
DIN EN 18049-1:2024-03
Wells for water extraction - Part 1: Design, German and English version prEN 18049-1:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu184,58 € -
ASTM D8006-24
Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&,P) Operations
15.02.2024 - PDF - Englisch - ASTM
mehr dazu66,00 € -
ASTM D8006-24 + Redline
Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&,P) Operations
15.02.2024 - PDF - Englisch - ASTM
mehr dazu79,00 € -
24,00 €
-
PR NF EN 805, P41-010PR (01/2024)
Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs composants
01.01.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu148,00 € -
NF EN 12201-2, T54-063-2 (01/2024)
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 2 : tubes
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu86,50 € -
NF EN 12201-3, T54-063-3 (01/2024)
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3 : Fittings
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu108,00 € -
NF EN 12201-1, T54-063-1 (01/2024)
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1 : general
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF EN 12201-4, T54-063-4 (01/2024)
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4 : Valves for water supply systems
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF EN 12201-5, T54-063-5 (01/2024)
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5 : Fitness for purpose of the system
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
DVGW W 575:2023-12
Ermittlung von Widerstandsbeiwerten für Form- und Verbindungsstücke in der Trinkwasser-Installation
01.12.2023 - PDF - Deutsche - DVGW
mehr dazu46,64 € -
DIN EN 805:2023-12
Water supply - Requirements for systems and components outside buildings, German and English version prEN 805:2023
01.12.2023 - PDF - Englisch, Deutsch - DIN
mehr dazu179,72 € -
22/30433302 DC:2023
BS EN 805. Water supply. Requirements for systems and components outside buildings
16.11.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
23/30483756 DC:2023
BS EN 805 Water supply. Requirements for systems and components outside buildings
14.11.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
DIN 18302:2023-09
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Special civil engineering works for the development of boreholes
01.09.2023 - PDF - Deutsche - DIN
mehr dazu39,35 € -
DIN 18327:2023-09
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Well construction and geothermal probes
01.09.2023 - PDF - Deutsche - DIN
mehr dazu45,98 € -
PR NF ISO 24512, P15-922PR (06/2023)
Activités relatives aux services de l'eau potable et de l'assainissement - Lignes directrices pour le management des services publics de l'eau potable et pour l'évaluation des services fournis
01.06.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu148,00 € -
ASTM C1802-23
Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
01.05.2023 - PDF - Englisch - ASTM
mehr dazu78,00 € -
ASTM C1802-23 + Redline
Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
01.05.2023 - PDF - Englisch - ASTM
mehr dazu93,00 € -
23/30461093 DC:2023
BS ISO 24512. Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
28.03.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS ISO 4427-2:2019+A1:2023
Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
28.02.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN 4943:2023-02
Graphical layout and documentation of wells and ground water measuring points.
01.02.2023 - PDF - Deutsche - DIN
mehr dazu104,95 € -
DIN 4067:2022-10
Water - Indicating labels - Distribution pipes and pipelines.
01.10.2022 - PDF - Deutsche - DIN
mehr dazu45,98 € -
126,26 €
-
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
28.09.2022 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
28.09.2022 - PDF - Englisch - AENOR
mehr dazu72,00 € -
PR NF EN 16941-1, P16-941-1PR (09/2022)
Réseaux d'eau non potable sur site - Partie 1 : Systèmes pour l'utilisation de l'eau de pluie
01.09.2022 - Paper - Englisch, Französisch - AFNOR
mehr dazu115,50 € -
DIN EN 16941-1:2022-09
On-site non-potable water systems - Part 1: Systems for the use of rainwater, German and English version prEN 16941-1:2022
01.09.2022 - PDF - Englisch, Deutsch - DIN
mehr dazu110,00 € -
22/30455824 DC:2022
BS EN 16941-1. On-site non-potable water systems. Part 1. Systems for the use of rainwater
25.08.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
25.05.2022 - PDF - Spanisch - AENOR
mehr dazu96,00 € -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
25.05.2022 - PDF - Englisch - AENOR
mehr dazu115,20 € -
BS EN ISO 22391-3:2009+A2:2021
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fittings
22.04.2022 - PDF - Englisch - BSI
mehr dazu293,00 € -
DIN EN ISO 11298-4:2022-04
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021), German version EN ISO 11298-4:2021.
01.04.2022 - PDF - Deutsche - DIN
mehr dazu126,26 € -
FD ISO/TR 24539, P15-539 (03/2022)
Activités de service relatives aux réseaux d'alimentation en eau potable, aux réseaux d'assainissement et aux réseaux de gestion des eaux pluviales - Exemples de bonnes pratiques en matière de gestion des eaux pluviales
01.03.2022 - Paper - Französisch - AFNOR
mehr dazu154,67 € -
DVGW W 551-5:2022-01
Hygiene in der Trinkwasser-Installation - Teil 5: Risikobewertung des stagnierenden Wassers in bestimmten Feuerlösch- und Brandschutzanlagen
01.01.2022 - PDF - Deutsche - DVGW
mehr dazu41,95 € -
83,30 €
-
DVGW W 291:2021-12
Cleaning and Disinfection of Drinking Water Distribution Systems
01.12.2021 - PDF - Deutsche - DVGW
mehr dazu83,30 € -
DIN EN 16941-2:2021-11
On-site non-potable water systems - Part 2: Systems for the use of treated greywater, German version EN 16941-2:2021
01.11.2021 - PDF - Deutsche - DIN
mehr dazu104,95 € -
DVGW W 400-2:2021-11
Technical Rules for Water Supply Systems - Part 2: Construction and Testing
01.11.2021 - PDF - Deutsche - DVGW
mehr dazu115,71 € -
65,18 €
-
NBN EN ISO 22391-3:2009/A2:2021
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 3: Formstücke - Änderung 2 (ISO 22391-3:2009/Amd 2:2021)
29.10.2021 - PDF - Französisch - NBN
mehr dazu20,00 € -
NBN EN ISO 22391-3:2009/A2:2021
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 3: Formstücke - Änderung 2 (ISO 22391-3:2009/Amd 2:2021)
29.10.2021 - PDF - Deutsche - NBN
mehr dazu20,00 € -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
29.10.2021 - PDF - Englisch - NBN
mehr dazu20,00 € -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
01.10.2021 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
29.09.2021 - PDF - Spanisch - AENOR
mehr dazu39,00 € -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
29.09.2021 - PDF - Englisch - AENOR
mehr dazu46,80 € -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
29.09.2021 - PDF - Spanisch - AENOR
mehr dazu34,00 € -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
29.09.2021 - PDF - Englisch - AENOR
mehr dazu40,80 € -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
29.09.2021 - PDF - Spanisch - AENOR
mehr dazu46,00 € -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
29.09.2021 - PDF - Englisch - AENOR
mehr dazu55,20 € -
UNE-EN 16941-2:2021
On-site non-potable water systems - Part 2: Systems for the use of treated greywater
01.09.2021 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN 16941-2:2021
On-site non-potable water systems - Part 2: Systems for the use of treated greywater
01.09.2021 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN 16941-2:2021
On-site non-potable water systems - Part 2: Systems for the use of treated greywater
01.09.2021 - PDF - Französisch - AENOR
mehr dazu88,80 € -
NBN ISO 9349:2021
Ductile iron pipes, fittings, accessories and their joints ? Thermal preinsulated products
02.06.2021 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN ISO 9349:2021
Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products ISO 9349:2017
02.06.2021 - PDF - Englisch - NBN
mehr dazu58,00 € -
DVGW GW 1200:2021-06
Objectives and Organisation for the Stand-by for Emergency Management for Gas and Water Grid Operators
01.06.2021 - PDF - Deutsche - DVGW
mehr dazu65,18 € -
BS EN ISO 22391-5:2009+A1:2020
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fitness purpose the system
14.05.2021 - PDF - Englisch - BSI
mehr dazu180,00 € -
PD ISO/TR 24539:2021
Service activities relating to drinking water supply, wastewater and stormwater systems. Examples of good practices for stormwater management
07.05.2021 - PDF - Englisch - BSI
mehr dazu377,00 € -
BS EN ISO 11298-4:2021
Plastics piping systems for renovation of underground water supply networks Lining with cured-in-place pipes
28.04.2021 - PDF - Englisch - BSI
mehr dazu331,00 € -
NBN EN ISO 11298-4:2021
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11298-4:2021)
23.04.2021 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN EN ISO 11298-4:2021
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11298-4:2021)
23.04.2021 - PDF - Deutsche - NBN
mehr dazu163,00 € -
NBN EN ISO 11298-4:2021
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11298-4:2021)
23.04.2021 - PDF - Englisch - NBN
mehr dazu163,00 € -
NBN EN 16941-2:2021
Vor-Ort-Anlagen für Nicht-Trinkwasser - Teil 2: Anlagen für die Verwendung von behandeltem Grauwasser
25.02.2021 - PDF - Französisch - NBN
mehr dazu142,00 € -
NBN EN 16941-2:2021
Vor-Ort-Anlagen für Nicht-Trinkwasser - Teil 2: Anlagen für die Verwendung von behandeltem Grauwasser
25.02.2021 - PDF - Deutsche - NBN
mehr dazu142,00 € -
NBN EN 16941-2:2021
Vor-Ort-Anlagen für Nicht-Trinkwasser - Teil 2: Anlagen für die Verwendung von behandeltem Grauwasser
25.02.2021 - PDF - Englisch - NBN
mehr dazu142,00 € -
BS EN 16941-2:2021
On-site non-potable water systems Systems for the use of treated greywater
02.02.2021 - PDF - Englisch - BSI
mehr dazu250,00 € -
NBN EN ISO 22391-5:2009/A1:2021
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 22391-5:2009/Amd 1:2020, korrigierte Fassung 2021-03)
27.01.2021 - PDF - Französisch - NBN
mehr dazu20,00 € -
NBN EN ISO 22391-5:2009/A1:2021
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 22391-5:2009/Amd 1:2020, korrigierte Fassung 2021-03)
27.01.2021 - PDF - Deutsche - NBN
mehr dazu20,00 € -
NBN EN ISO 22391-5:2009/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
27.01.2021 - PDF - Englisch - NBN
mehr dazu20,00 € -
NF EN 16941-2, P16-941-2 (01/2021)
On-site non-potable water systems - Part 2 : systems for the use of treated greywater
01.01.2021 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
DIN 3606:2021-01
Pipe hoisting caps for casing pipes according to DIN 4918.
01.01.2021 - PDF - Deutsche - DIN
mehr dazu32,34 € -
BS EN ISO 22391-2:2009+A1:2020
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Pipes
17.12.2020 - PDF - Englisch - BSI
mehr dazu180,00 € -
NF EN ISO 22391-2/A1, T54-982-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes - Amendment 1
01.12.2020 - Paper - Französisch - AFNOR
mehr dazu25,67 € -
NF EN ISO 22391-3/A1, T54-982-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings - Amendment 1
01.12.2020 - Paper - Französisch - AFNOR
mehr dazu34,67 € -
NF EN ISO 22391-5/A1, T54-982-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5 : fitness for purpose of the system - Amendment 1
01.12.2020 - Paper - Französisch - AFNOR
mehr dazu34,67 € -
DIN 4905:2020-09
Hydraulic solidifying seals for well construction - Requirements and testing.
01.09.2020 - PDF - Deutsche - DIN
mehr dazu52,90 € -
39,65 €
-
DVGW W 300-5:2020-08
Drinking Water Tanks - Part 5: Assessment of the Fitness of Use of Construction Products for Lining and Coating Systems
01.08.2020 - PDF - Deutsche - DVGW
mehr dazu61,59 € -
ASTM D5716/D5716M-20
Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
01.06.2020 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM D5716/D5716M-20 + Redline
Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
01.06.2020 - PDF - Englisch - ASTM
mehr dazu61,00 € -
DVGW W 557:2020-05
Cleaning and Disinfection of Drinking Water Installations
01.05.2020 - PDF - Deutsche - DVGW
mehr dazu78,74 € -
NF ISO 24536, P15-926 (03/2020)
Service activities relating to drinking water supply, wastewater and stormwater systems - Stormwater management - Guidelines for stormwater management in urban areas
01.03.2020 - Paper - Französisch - AFNOR
mehr dazu130,50 € -
BS EN ISO 11298-3:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
27.02.2020 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS EN ISO 11298-1:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground water supply networks General
27.02.2020 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 9349:2017 + Redline
Tracked Changes. Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
27.02.2020 - PDF - Englisch - BSI
mehr dazu235,00 € -
PD CEN ISO/TS 22391-7:2018 + Redline
Tracked Changes. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance the assessment conformity
24.02.2020 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 4427-3:2019 + Redline
Tracked Changes. Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
24.02.2020 - PDF - Englisch - BSI
mehr dazu382,00 € -
BS ISO 4427-1:2019 + Redline
Tracked Changes. Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
24.02.2020 - PDF - Englisch - BSI
mehr dazu326,00 € -
DVGW W 616:2020-01
Sensor-supported operation monitoring of pump systems in the drinking water supply
01.01.2020 - PDF - Deutsche - DVGW
mehr dazu61,59 € -
BS ISO 24536:2019
Service activities relating to drinking water supply, wastewater and stormwater systems. Stormwater management. Guidelines for stormwater management in urban areas
15.10.2019 - PDF - Englisch - BSI
mehr dazu348,00 € -
UNE-EN ISO 11298-3:2019
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
25.09.2019 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
UNE-EN ISO 11298-3:2019
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
25.09.2019 - PDF - Englisch - AENOR
mehr dazu85,20 € -
DIN 18319:2019-09
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Trenchless pipelaying
01.09.2019 - PDF - Deutsche - DIN
mehr dazu45,98 € -
BS ISO 4427-5:2019
Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fitness purpose of the system
15.08.2019 - PDF - Englisch - BSI
mehr dazu180,00 € -
BS ISO 4427-3:2019
Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
15.08.2019 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS ISO 4427-1:2019
Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
15.08.2019 - PDF - Englisch - BSI
mehr dazu250,00 € -
19/30385511 DC:2019
BS ISO 21307 AMD1. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) piping systems
21.05.2019 - PDF - Englisch - BSI
mehr dazu24,00 € -
ASTM E2728-19
Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
01.05.2019 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2728-19 + Redline
Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
01.05.2019 - PDF - Englisch - ASTM
mehr dazu61,00 € -
DIN CEN ISO/TS 22391-7*DIN SPEC 19576:2019-04
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018), German and English version CEN ISO/TS 22391-7:2018.
01.04.2019 - PDF - Englisch, Deutsch - DIN
mehr dazu79,63 € -
UNE-EN 16941-1:2019
On-site non-potable water systems - Part 1: Systems for the use of rainwater
06.03.2019 - PDF - Spanisch - AENOR
mehr dazu83,00 € -
UNE-EN 16941-1:2019
On-site non-potable water systems - Part 1: Systems for the use of rainwater
06.03.2019 - PDF - Englisch - AENOR
mehr dazu99,60 € -
PD CEN ISO/TS 22391-7:2018
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance the assessment conformity
14.01.2019 - PDF - Englisch - BSI
mehr dazu250,00 € -
CEN ISO/TS 22391-7:2018
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 7: Empfehlungen für die Beurteilung der Konformität (ISO/TS 22391-7:2018)
21.12.2018 - PDF - Deutsche - NBN
mehr dazu58,00 € -
CEN ISO/TS 22391-7:2018
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 7: Empfehlungen für die Beurteilung der Konformität (ISO/TS 22391-7:2018)
21.12.2018 - PDF - Englisch - NBN
mehr dazu58,00 € -
122,15 €
-
DIN EN ISO 11298-3:2018-12
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 3: Close-Fit-Lining (ISO 11298-3:2018), Deutsche Fassung EN ISO 11298-3:2018 / Achtung: Diese Norm ist Bestandteil des DVGW Regelwerks.
01.12.2018 - PDF - Deutsche - DIN
mehr dazu85,79 € -
NBN EN ISO 11298-3:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 3: Close-Fit-Lining (ISO 11298-3:2018)
27.11.2018 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN EN ISO 11298-3:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 3: Close-Fit-Lining (ISO 11298-3:2018)
27.11.2018 - PDF - Deutsche - NBN
mehr dazu89,00 € -
NBN EN ISO 11298-3:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 3: Close-Fit-Lining (ISO 11298-3:2018)
27.11.2018 - PDF - Englisch - NBN
mehr dazu89,00 € -
ASTM D5299/D5299M-18
Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
15.11.2018 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM D5299/D5299M-18 + Redline
Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
15.11.2018 - PDF - Englisch - ASTM
mehr dazu68,00 € -
UNE-EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
07.11.2018 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
07.11.2018 - PDF - Englisch - AENOR
mehr dazu84,00 € -
BS EN ISO 11298-3:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen Close-Fit-Lining
18.10.2018 - PDF - Englisch - BSI
mehr dazu250,00 € -
DVGW W 214-3:2018-09
pH-Adjustment in Drinking Water Treatment - Part 3: Planning and Operation of Systems for Carbon Dioxide Removal
01.09.2018 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks
Part 3: Lining with close-fit pipes
31.08.2018 - Paper - Französisch - ISO
mehr dazu110,00 € -
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks
Part 3: Lining with close-fit pipes
31.08.2018 - Paper - Englisch - ISO
mehr dazu110,00 € -
BS EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks Lining with continuous pipes
02.08.2018 - PDF - Englisch - BSI
mehr dazu180,00 € -
UNE-EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
25.07.2018 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
25.07.2018 - PDF - Englisch - AENOR
mehr dazu81,60 € -
DIN 1998:2018-07
Unterbringung von Leitungen und Anlagen in öffentlichen Verkehrsflächen - Richtlinie für die Planung
01.07.2018 - PDF - Deutsche - DIN
mehr dazu59,63 € -
DIN EN ISO 11298-1:2018-07
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 1: Allgemeines (ISO 11298-1:2018)
01.07.2018 - PDF - Englisch - DIN
mehr dazu107,48 € -
DIN EN ISO 11298-1:2018-07
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 1: Allgemeines (ISO 11298-1:2018), Deutsche Fassung EN ISO 11298-1:2018
01.07.2018 - PDF - Deutsche - DIN
mehr dazu85,79 € -
ASTM E3136-18
Standard Guide for Climate Resiliency in Water Resources
01.07.2018 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM E3136-18 + Redline
Standard Guide for Climate Resiliency in Water Resources
01.07.2018 - PDF - Englisch - ASTM
mehr dazu72,00 € -
DIN EN 16941-1:2018-06
Vor-Ort Anlagen für Nicht-Trinkwasser - Teil 1: Anlagen für die Verwendung von Regenwasser, Deutsche Fassung EN 16941-1:2018
01.06.2018 - PDF - Deutsche - DIN
mehr dazu104,95 € -
DIN EN 16941-1:2018-06
Vor-Ort Anlagen für Nicht-Trinkwasser - Teil 1: Anlagen für die Verwendung von Regenwasser
01.06.2018 - PDF - Englisch - DIN
mehr dazu131,40 € -
DIN EN ISO 11298-2:2018-05
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 2: Rohrstrang-Lining (ISO 11298-2:2018), Deutsche Fassung EN ISO 11298-2:2018 / Achtung: Diese Norm ist Bestandteil des DVGW Regelwerks.
01.05.2018 - PDF - Deutsche - DIN
mehr dazu72,80 € -
DIN EN ISO 11298-2:2018-05
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 2: Rohrstrang-Lining (ISO 11298-2:2018)
01.05.2018 - PDF - Englisch - DIN
mehr dazu91,12 € -
NBN EN ISO 11298-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 1: Allgemeines (ISO 11298-1:2018)
27.04.2018 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN EN ISO 11298-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 1: Allgemeines (ISO 11298-1:2018)
27.04.2018 - PDF - Deutsche - NBN
mehr dazu89,00 € -
NBN EN ISO 11298-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 1: Allgemeines (ISO 11298-1:2018)
27.04.2018 - PDF - Englisch - NBN
mehr dazu89,00 € -
BS EN ISO 11298-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen Allgemeines
13.04.2018 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN 1239:2018-04
Schachtabdeckungen für Brunnenschächte, Quellfassungen und andere Bauwerke der Wasserversorgung - Baugrundsätze / Achtung: Diese Norm ist Bestandteil des DVGW Regelwerks.
01.04.2018 - PDF - Deutsche - DIN
mehr dazu72,80 € -
DVGW W 271:2018-04
Invertebrates in Water Supply Facilities - Occurrence and Recommendations for Dealing with
01.04.2018 - PDF - Deutsche - DVGW
mehr dazu121,30 € -
NBN EN ISO 11298-2:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 2: Rohrstrang-Lining (ISO 11298-2:2018)
23.03.2018 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 11298-2:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 2: Rohrstrang-Lining (ISO 11298-2:2018)
23.03.2018 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 11298-2:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Wasserversorgungsnetzen - Teil 2: Rohrstrang-Lining (ISO 11298-2:2018)
23.03.2018 - PDF - Englisch - NBN
mehr dazu58,00 € -
VDI 2069:2018-03
Verhindern des Einfrierens von Wasser führenden Leitungen
01.03.2018 - PDF - Englisch, Deutsch - VDI
mehr dazu115,75 € -
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks
Part 1: General
26.02.2018 - Paper - Französisch - ISO
mehr dazu110,00 € -
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks
Part 1: General
26.02.2018 - Paper - Englisch - ISO
mehr dazu110,00 € -
46,55 €
-
18/30320655 DC:2018
BS ISO 20325. Service activities relating to drinking water supply and wastewater systems. Stormwater management. Guidelines for stormwater management in urban areas
02.01.2018 - PDF - Englisch - BSI
mehr dazu24,00 € -
NF EN 16941-1, P16-941-1 (01/2018)
Vor-Ort-Anlagen für Nicht-Trinkwasser - Teil 1: Anlagen für die Verwendung von Regenwasser
01.01.2018 - Paper - Französisch - AFNOR
mehr dazu96,12 € -
41,86 €
-
DIN 4904:2017-10
Geschüttete Abdichtungstone für den Brunnenbau - Anforderungen und Prüfungen / Achtung: Diese Norm ist Bestandteil des DVGW Regelwerks.
01.10.2017 - PDF - Deutsche - DIN
mehr dazu59,63 € -
DVGW W 392:2017-09
Water Loss in Pipeline Networks - Determination, Water Balance, Performance Indicators, Monitoring
01.09.2017 - PDF - Deutsche - DVGW
mehr dazu61,59 € -
DVGW W 400-3-B1:2017-09
Technical rules for Water Supply Systems - Part 3: Operation and Maintenance - Supplement 1: Inspection and Servicing of Distribution Systems
01.09.2017 - PDF - Deutsche - DVGW
mehr dazu43,76 € -
DVGW W 1060:2017-08
IT-Security - Standard for Water Supply/Waste Water Utilities
01.08.2017 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
DIN 4918:2017-04
Nahtlose Bohrrohre mit Gewindeverbindung für verrohrte Bohrungen / Achtung: Diese Norm ist Bestandteil des DVGW Regelwerks.
01.04.2017 - PDF - Deutsche - DIN
mehr dazu45,98 € -
BS ISO 9349:2017
Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
31.03.2017 - PDF - Englisch - BSI
mehr dazu180,00 € -
DIN 4926:2016-12
Brunnenköpfe aus Stahl - DN 300 bis DN 1200 / Achtung: Diese Norm ist Bestandteil des DVGW Regelwerks.
01.12.2016 - PDF - Deutsche - DIN
mehr dazu65,89 € -
DVGW W 635:2016-10
High-Voltage and Low-Voltage Equipment in Water Supply Systems, Substitute Power Supply Systems with Power Generators, Battery Installations, uninterruptable Power Supply Systems
01.10.2016 - PDF - Deutsche - DVGW
mehr dazu83,30 € -
DVGW W 300-8:2016-10
Drinking Water Tanks - Recommendations for Practice of Hygiene Concept: Construction and Rehabilitation
01.10.2016 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
DVGW W 300-7:2016-09
Drinking WaterTanks - Part 7: Recommendations for Practice of Cleaning and Disinfection Concept
01.09.2016 - PDF - Deutsche - DVGW
mehr dazu43,76 € -
DVGW W 300-6:2016-09
Drinking Water Tanks - Design, Construction, Operation and Maintenance of System and prefabricated Tanks
01.09.2016 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
DVGW GW 125-B1:2016-03
1. Beiblatt zu GW 125 Bäume, unterirdische Leitungen und Kanäle: Beurteilungskriterien für Baumwurzel-Gasrohrleitungs-Interaktionen
01.03.2016 - PDF - Deutsche - DVGW
mehr dazu43,76 € -
121,30 €
-
DVGW W 1100-2:2016-02
Definitions of Main Performance Indicators in Water Supply
01.02.2016 - PDF - Deutsche - DVGW
mehr dazu150,65 € -
67,95 €
-
DVGW W 1000:2016-01
Requirements on the Qualification and Organisation of Drinking Water Utilities
01.01.2016 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
15/30316134 DC:2015
BS ISO 21307. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
30.10.2015 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN ISO 1452-3:2010
Plastics piping systems for water supply and buried above-ground drainage sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Fittings
31.08.2015 - PDF - Englisch - BSI
mehr dazu331,00 € -
121,30 €
-
DVGW W 1001-B2:2015-03
Safe and secure drinking water supply - risk management under normal operationg conditions - Supplement 2: Risk management of catchment areas for groundwater abstraction
01.03.2015 - PDF - Deutsche - DVGW
mehr dazu121,30 € -
Von: 86,89 €
-
121,30 €
-
DVGW W 300-2:2014-10
Drinking Water Tanks - Part 2: Operation and Maintenance
01.10.2014 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
DVGW W 300-3:2014-10
Drinking Water Tanks - Part 3: Rehabilitation and Improvement
01.10.2014 - PDF - Deutsche - DVGW
mehr dazu86,89 € -
DVGW W 300-4:2014-10
Drinking Water Tanks - Part 4: Materials, Lining and Coating Systems - Principles and Quality Management on the Construction Site
01.10.2014 - PDF - Deutsche - DVGW
mehr dazu121,30 € -
JIS K 6762/AMENDMENT 1:2014
Double wall polyethylene pipes for water supply (Amendment 1)
22.09.2014 - PDF - Japanisch - JSA
mehr dazu32,50 € -
DVGW W 386:2014-09
Hydranten in der Trinkwasserverteilung - Anforderungen und Prüfungen
01.09.2014 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
DIN 4924:2014-07
Sande und Kiese für den Brunnenbau - Anforderungen und Prüfverfahren
01.07.2014 - PDF - Deutsche - DIN
mehr dazu45,98 € -
XP CEN/TS 12201-7, T54-063-7 (05/2014)
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 7 : Empfehlungen für die Beurteilung der Konformität
01.05.2014 - Paper - Französisch - AFNOR
mehr dazu99,00 € -
157,11 €
-
107,90 €
-
PD ISO/TR 4191:2014
Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation
28.02.2014 - PDF - Englisch - BSI
mehr dazu348,00 € -
86,89 €
-
86,89 €
-
DVGW W 120-2:2013-07
Qualifikationsanforderungen für die Bereiche Bohrtechnik und oberflächennahe Geothermie (Erdwärmesonden)
01.07.2013 - PDF - Deutsche - DVGW
mehr dazu65,18 € -
DVGW W 398:2013-01
Praxishinweise zur hygienischen Eignung von Ortbeton und vor Ort hergestellten zementgebundenen Werkstoffen zur Trinkwasserspeicherung
01.01.2013 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
XP CEN/TS 14632, T57-232 (09/2012)
Kunststoff-Rohrleitungssysteme für die Entwässerung und Wasserversorgung mit und ohne Druck - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Empfehlungen für die Beurteilung der Konformität
01.09.2012 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
DVGW W 120-1:2012-08
Qualifikationsanforderungen für die Bereiche Bohrtechnik, Brunnenbau, -regenerierung, -sanierung und -rückbau
01.08.2012 - PDF - Deutsche - DVGW
mehr dazu65,18 € -
DIN 1988-200:2012-05
Technische Regeln für Trinkwasser-Installationen - Teil 200: Installation Typ A (geschlossenes System) - Planung, Bauteile, Apparate, Werkstoffe, Technische Regel des DVGW / Achtung: Gilt in Verbindung mit DIN EN 806-2 (2005-06)
01.05.2012 - PDF - Deutsche - DIN
mehr dazu120,84 € -
DIN 1988-200:2012-05
Technische Regeln für Trinkwasser-Installationen - Teil 200: Installation Typ A (geschlossenes System) - Planung, Bauteile, Apparate, Werkstoffe, Technische Regel des DVGW
01.05.2012 - PDF - Englisch - DIN
mehr dazu150,93 € -
67,95 €
-
JIS Q 24512:2012 (R2016)
Activities relating to drinking water and wastewater services - Guidelines for the management of drinking water utilities and for the assessment of drinking water services
21.03.2012 - PDF - Japanisch - JSA
mehr dazu50,18 € -
DIN SPEC 19757:2012-03
Dienstleistungen im Bereich der Trinkwasserver- und Abwasserentsorgung - Leitfaden für das Management und die Beurteilung der Trinkwasserversorgung
01.03.2012 - PDF - Englisch, Deutsch - DIN
mehr dazu187,10 € -
DVGW W 307:2012-02
Verfüllung des Ringraums zwischen Mantel- und Produktrohren bei der Kreuzung von Bahnanlagen, Straßen und Wasserstraßen
01.02.2012 - PDF - Deutsche - DVGW
mehr dazu67,95 € -
DVGW W 578 DVGW VP 578:2012-02
Kombinations-Eckventil mit Geräteanschluss, Anforderungen und Prüfungen
01.02.2012 - PDF - Deutsche - DVGW
mehr dazu43,76 € -
DVGW W 1001-B1:2011-11
Sicherheit in der Trinkwasserversorgung - Risikomanagement im Normalbetrieb - Beiblatt 1: Umsetzung für Wasserverteilungsanlagen
01.11.2011 - PDF - Deutsche - DVGW
mehr dazu43,76 €