91 : Konstruktions- und Baumaterialen
-
399,00 €
-
25/30467069 DC:2025
BS ISO 10406-1 Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods Part 1: FRP bars
06.02.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30467130 DC:2025
BS ISO 10406-4 Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods Part 4: FRP grids
06.02.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN EN ISO 16484-2:2025
Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2025)
05.02.2025 - - - NBN
mehr dazu92,00 € -
Von: 91,00 €
-
NBN EN 1364-6:2025
Fire resistance tests for non-loadbearing elements - Part 6: Open-state cavity barriers
05.02.2025 - - - NBN
mehr dazu89,00 € -
DIN EN 14908-7:2025-02
Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols, English version EN 14908-7:2019
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu130,09 € -
DIN EN 14908-9:2025-02
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands, English version EN 14908-9:2021
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu102,34 € -
DIN EN 14908-8:2025-02
Open Date Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 8: Communication using Broadband over Power Line Networks - with internet protocols, English version EN 14908-8:2021
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu82,15 € -
DIN EN 14908-6:2025-02
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements, English version EN 14908-6:2022.
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu474,58 € -
DIN EN 18159:2025-02
Double skin metal faced insulating sandwich panels for roofing and cladding - Environmental Product Declarations - Product category rules complementary to EN 15804 for double skin metal faced insulating sandwich panels for roofing and cladding, German and English version prEN 18159:2025
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu108,13 € -
DIN EN ISO 52120-1:2025-02
Energy performance of buildings - Contribution of building automation, controls and building management - Part 1: General framework and procedures (ISO 52120-1:2021, Corrected version 2022-09), German version EN ISO 52120-1:2022
01.02.2025 - PDF - Deutsche - DIN
mehr dazu222,71 € -
DIN 4108 Beiblatt 2 Berichtigung 1:2025-02
Thermal insulation and energy economy in buildings - Supplement 2: Thermal bridges - Examples for planning and performance, Corrigendum 1.
01.02.2025 - PDF - Deutsche - DIN
mehr dazu0,00 € -
82,15 €
-
DIN EN ISO 52016-3/A1:2025-02
Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements - Amendment 1: Reference control scenarios for adaptive building envelope elements with active solar shading or chromogenic glazing (ISO 52016-3:2023/DAM 1:2024), German and English version EN ISO 52016-3:2023/prA1:2024
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu82,15 € -
ASTM C183/C183M-25
Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
01.02.2025 - PDF - Englisch - ASTM
mehr dazu69,00 € -
ASTM C183/C183M-25 + Redline
Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
01.02.2025 - PDF - Englisch - ASTM
mehr dazu83,00 € -
DIN EN 1993-7:2025-02
Eurocode 3 - Design of steel structures - Part 7: Sandwich panels, German and English version prEN 1993-7:2025
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu174,30 € -
DIN EN 15665:2025-02
Ventilation for buildings - Ventilation systems in residential buildings - Design, German and English version prEN 15665:2025
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu174,30 € -
PR NF EN 13364, B10-626PR (02/2025)
Méthodes d'essai pour pierre naturelle - Détermination de l'effort de rupture au niveau du goujon de l'agrafe
01.02.2025 - Papier - Englisch, Französisch - AFNOR
mehr dazu83,00 € -
PR NF D36-103, D36-103PR (02/2025)
Économie domestique - Tuyaux flexibles en caoutchouc vulcanisé (avec armature) et tuyaux flexibles thermoplastiques (avec armature) pour le raccordement externe des appareils à usage domestique utilisant les combustibles gazeux distribués par réseaux
01.02.2025 - Papier - Französisch - AFNOR
mehr dazu91,50 € -
PR NF D36-110, D36-110PR (02/2025)
Economie domestique - Ensembles de raccordement constitués à partir de tubes souples conformes à NF D36-101 et équipés de dispositifs de serrage pour appareils ménagers à butane et à propane alimentés à partir de bouteilles ou de citernes individuelles
01.02.2025 - Papier - Französisch - AFNOR
mehr dazu46,50 € -
PR NF D36-112, D36-112PR (02/2025)
Économie domestique - Tuyaux flexibles en caoutchouc vulcanisé (avec armature) et tuyaux flexibles thermoplastiques (avec armature) pour le raccordement externe des appareils à usage domestique utilisant le butane ou le propane alimentés à partir de bouteilles ou citerne individuelle
01.02.2025 - Papier - Französisch - AFNOR
mehr dazu83,00 € -
PR NF D36-121, D36-121PR (02/2025)
Économie domestique - Raccords d'extrémité avec joint d'étanchéité pour tuyaux flexibles métalliques onduleux pour le raccordement externe des appareils à usage domestique utilisant les combustibles gazeux distribués par réseaux
01.02.2025 - Papier - Französisch - AFNOR
mehr dazu46,50 € -
PR NF D36-125, D36-125PR (02/2025)
Économie domestique - Raccords d'extrémité avec joint d'étanchéité pour tuyaux flexibles métalliques onduleux pour le raccordement externe des appareils à usage domestique utilisant le butane et le propane distribués par récipients
01.02.2025 - Papier - Französisch - AFNOR
mehr dazu58,00 € -
DIN 4051-100:2025-02
Sewer clinker - Proof of conformity for sewer clinker according to DIN 4051-1
01.02.2025 - PDF - Deutsche - DIN
mehr dazu47,38 € -
74,95 €
-
DIN EN IEC 62056-5-3:2025-02
Electricity metering data exchange - The DLMS®/COSEM suite - Part 5-3: DLMS®/COSEM application layer (IEC 62056-5-3:2023), English version EN IEC 62056-5-3:2023
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu474,58 € -
DIN EN IEC 62056-6-1:2025-02
Electricity metering data exchange - The DLMS®/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2023), English version EN IEC 62056-6-1:2024
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu140,93 € -
DIN EN IEC 62056-6-2:2025-02
Electricity metering data exchange - The DLMS®/COSEM suite - Part 6-2: COSEM interface classes (IEC 62056-6-2:2023), English version EN IEC 62056-6-2:2023
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu474,58 € -
DIN 4134-101:2025-02
Air-supported structures - Part 101: Proof of conformity for air-supported structures according to DIN 4134-1
01.02.2025 - PDF - Deutsche - DIN
mehr dazu40,56 € -
DIN 4134-1:2025-02
Air-supported structures - Part 1: structural design, construction and operation
01.02.2025 - PDF - Deutsche - DIN
mehr dazu74,95 € -
DIN EN 12390-18:2025-02
Testing hardened concrete - Part 18: Determination of the chloride migration coefficient, German version EN 12390-18:2021+A1:2024
01.02.2025 - PDF - Deutsche - DIN
mehr dazu82,15 € -
DIN EN 934-7:2025-02
Admixtures for concrete, mortar and grout - Part 7: Shrinkage reducing admixtures - Definitions, requirements, conformity, marking and labelling, German version EN 934-7:2024
01.02.2025 - PDF - Deutsche - DIN
mehr dazu54,49 € -
DIN EN 1191:2025-02
Windows and doors - Resistance to repeated opening and closing - Test method, German and English version prEN 1191:2025
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu135,89 € -
DIN 4753-3:2025-02
Water heaters, water heating installations and storage water heaters for drinking water - Part 3: Corrosion protection on the water side by enamelling and cathodic protection - Requirements and testing
01.02.2025 - PDF - Deutsche - DIN
mehr dazu88,41 € -
DIN/TS 20000-201:2025-02
Application of construction products in structures - Part 201: Application document for flexible sheets for waterproofing according to European product standards for the use as waterproofing of roofs
01.02.2025 - PDF - Deutsche - DIN
mehr dazu90,65 € -
DIN CEN/TS 1455-2:2025-02
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023
01.02.2025 - PDF - Deutsche - DIN
mehr dazu70,65 € -
DIN CEN/TS 1566-2:2025-02
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023
01.02.2025 - PDF - Deutsche - DIN
mehr dazu76,17 € -
DIN EN 13126-19:2025-02
Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 19: Sliding closing devices, German and English version prEN 13126-19:2025
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu88,41 € -
DIN EN ISO 19432-2:2025-02
Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 2: Machines for abrasive chains - Safety requirements (ISO/DIS 19432-2:2024), German and English version prEN ISO 19432-2:2024
01.02.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu168,69 € -
25/30468662 DC:2025
BS ISO 15686-2 Buildings and constructed assets — Service life planning Part 2: Process considerations
31.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30468665 DC:2025
BS ISO 15686-3 Buildings and constructed assets — Service life planning Part 3: Methods, data communication
31.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
254,00 €
-
25/30467641 DC:2025
BS ISO 18953 Steel structures - Structural bolting - Test method to determine loss of pretension from faying surface coatings
31.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30486206 DC:2025
BS ISO 21174 Doors, windows and curtain walling — Hardware for doors and windows — Vocabulary
31.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
ISO/DIS 21174:2025
Doors, windows and curtain walling — Hardware for doors and windows — Vocabulary
31.01.2025 - Papier - Englisch - ISO
mehr dazu75,00 € -
25/30468659 DC:2025
BS ISO 15686-1 Buildings and constructed assets — Service life planning Part 1: General principles framework
30.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN 1991-2:2023 + Redline
Tracked Changes. Eurocode 1. Actions on structures Traffic loads bridges and other civil engineering works
30.01.2025 - PDF - Englisch - BSI
mehr dazu559,00 € -
25/30464931 DC:2025
BS ISO 18726 Assessment, prevention, and repair for steel corrosion in reinforced concrete structures
30.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
UNE-EN 480-6:2025
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
29.01.2025 - PDF - Spanisch - AENOR
mehr dazu49,00 € -
UNE-EN 15502-2-1:2023+A1:2024/AC:2025
Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
29.01.2025 - - - AENOR
mehr dazu0,00 € -
370,00 €
-
312,00 €
-
351,00 €
-
312,00 €
-
DD CEN/TS 14175-5:2006
Fume cupboards Recommendations for installation and maintenance
29.01.2025 - PDF - Englisch - BSI
mehr dazu312,00 € -
312,00 €
-
NBN ISO 4931-1:2025
Gebäude und Tiefbauwerke – Grundsätze, Rahmenbedingungen und Leitlinien für die Resilienzplanung – Teil 1: Anpassung an den Klimawandel
28.01.2025 - PDF - Englisch - NBN
mehr dazu145,00 € -
NBN ISO 16813:2025
Building environment design — Indoor environment — General principles
28.01.2025 - - - NBN
mehr dazu92,00 € -
NBN ISO 7615-1:2025
Energieeffizienz von Gebäudesystemen — Unterflur-Luftverteilungssysteme — Teil 1: Allgemeiner Überblick
28.01.2025 - PDF - Englisch - NBN
mehr dazu145,00 € -
NBN ISO 5727:2025
Zugänglichkeit und Nutzbarkeit der gebauten Umwelt – Zugänglichkeit des unbeweglichen Kulturerbes – Grundsätze und Methodik für Interventionen
28.01.2025 - PDF - Englisch - NBN
mehr dazu187,00 € -
NBN ISO 16316:2025
Fenster, Türen und Vorhangfassaden – Auswirkungen von Windeinwirkung bei Stürmen auf Trümmer – Prüfverfahren und Klassifizierung
28.01.2025 - PDF - Englisch - NBN
mehr dazu187,00 € -
25/30466857 DC:2025
BS ISO 18954 Steel structures - Structural bolting - Test method to determine parameters of bolt tightening procedures
28.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN ISO 7567:2025
Bambuskonstruktionen — Brettschichtholz aus Bambus — Produktspezifikationen
28.01.2025 - PDF - Englisch - NBN
mehr dazu92,00 € -
NBN ISO 16521:2025
Entwurf von betongefüllten Stahlrohr-Hybridstrukturen (CFST)
28.01.2025 - PDF - Englisch - NBN
mehr dazu208,00 € -
IEC 60335-2-78:2021/AMD1:2025
IEC 60335-2-78:2021/AMD1:2025 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues
28.01.2025 - PDF - Englisch, Französisch - IEC
mehr dazu12,00 € -
25/30466854 DC:2025
BS ISO 18900 Steel structures — Structural bolting — Test method for determining the slip factor for faying surfaces of slip-resistant connections
27.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30468109 DC:2025
BS ISO 8144-2 Thermal insulation - Mineral wool mats for ventilated roof spaces Part 2: Specification horizontal applications with unrestricted ventilation
27.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30468106 DC:2025
BS ISO 8144-1 Thermal insulation — Mineral wool mats for ventilated roof spaces Part 1: Specification applications with restricted ventilation
24.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN ISO 19650-6:2025
Organization and digitization of information about buildings civil engineering works, including building modelling (BIM). Information management using Health safety
23.01.2025 - PDF - Englisch - BSI
mehr dazu160,00 € -
25/30462473 DC:2025
BS EN 13381-11 Test methods for determining the contribution to fire resistance of structural members Part 11: Applied protection solid steel bars in tension based on mechanically loaded tests
23.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30502292 DC:2025
BS EN 1191 Windows and doors - Resistance to repeated opening and closing - Test method
23.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN EN ISO 19650-6:2025
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 6: Health and safety information (ISO 19650-6:2025)
22.01.2025 - - - NBN
mehr dazu124,00 € -
UNE-EN 12201-3:2024/AC:2025
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
22.01.2025 - - - AENOR
mehr dazu0,00 € -
UNE-EN ISO 24342:2025
Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)
22.01.2025 - - - AENOR
mehr dazuVon: 68,00 € -
NBN EN ISO 19650-2:2019 ANB:2024
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 2: Delivery phase of the assets (ISO 19650-2:2018) - National annex: Information container identification
21.01.2025 - - - NBN
mehr dazu58,00 € -
BS ISO 13315-2:2025
Environmental management for concrete and structures System boundary inventory data
21.01.2025 - PDF - Englisch - BSI
mehr dazu312,00 € -
BS EN ISO 4064-3:2025 + Redline
Tracked Changes. Water meters for cold potable water and hot Test report format
21.01.2025 - PDF - Englisch - BSI
mehr dazu559,00 € -
BS EN ISO 4064-4:2025 + Redline
Tracked Changes. Water meters for cold potable water and hot Non-metrological requirements not covered in ISO 4064-1
21.01.2025 - PDF - Englisch - BSI
mehr dazu438,00 € -
PD ISO/TR 18961:2025
Buildings and civil engineering works. Seismic resilience assessment and strategies. Compilation of relevant information
20.01.2025 - PDF - Englisch - BSI
mehr dazu191,00 € -
ISO/DIS 24599:2025
Guidelines for the management of mobile toilets under epidemic situations
20.01.2025 - Papier - Englisch - ISO
mehr dazu75,00 € -
IEC 62305:2025 SER
IEC 62305:2025 SER Protection against lightning - ALL PARTS
20.01.2025 - PDF - Englisch, Französisch - IEC
mehr dazu1.573,00 € -
BS EN 14501:2021+A1:2025
Blinds and shutters. Thermal and visual comfort. Performance characteristics and classification
20.01.2025 - PDF - Englisch - BSI
mehr dazu351,00 € -
PD ISO/TR 5863:2025
Integrative design of the building envelope. General principles
16.01.2025 - PDF - Englisch - BSI
mehr dazu266,00 € -
25/30495623 DC:2025
BS EN 1993-7 Eurocode 3 - Design of steel structures Part 7: Sandwich panels
16.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30497187 DC:2025
BS EN 1090-4 Execution of steel structures and aluminium Part 4: Technical requirements for cold-formed structural elements roof, ceiling, floor wall applications
16.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30497190 DC:2025
BS EN 1090-5 Execution of steel structures and aluminium Part 5: Technical requirements for cold-formed structural elements roof, ceiling, floor wall applications
16.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
UNE-EN 17887-1:2025
Thermal performance of buildings - In situ testing of completed buildings - Part 1: Data collection for aggregate heat loss test
15.01.2025 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN 17887-2:2025
Thermal performance of buildings - In situ testing of completed buildings - Part 2: Steady-state data analysis for aggregate heat loss test
15.01.2025 - PDF - Spanisch - AENOR
mehr dazu103,00 € -
UNE-EN 17888-1:2025
Thermal performance of buildings - In situ testing of building test structures - Part 1: Data collection for aggregate heat loss test
15.01.2025 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN 17888-2:2025
Thermal performance of buildings - In situ testing of building test structures - Part 2: Steady-state data analysis for aggregate heat loss test
15.01.2025 - PDF - Spanisch - AENOR
mehr dazu102,00 € -
UNE-EN 15502-2-2:2025
Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances
15.01.2025 - - - AENOR
mehr dazuVon: 100,00 € -
UNE-EN 10248-2:2025
Hot-rolled steel sheet piles - Part 2: Tolerances on dimensions and shape
15.01.2025 - - - AENOR
mehr dazuVon: 63,00 € -
UNE-EN 10249-2:2025
Cold formed steel sheet piles - Part 2: Tolerances on dimensions and shape
15.01.2025 - - - AENOR
mehr dazuVon: 60,00 € -
UNE-EN 12309-3:2025
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Requirements, test conditions and test methods
15.01.2025 - - - AENOR
mehr dazuVon: 124,00 € -
BS EN ISO 4064-4:2025
Water meters for cold potable water and hot Non-metrological requirements not covered in ISO 4064-1
15.01.2025 - PDF - Englisch - BSI
mehr dazu312,00 € -
UNE-EN ISO 21265:2025
Building and civil engineering sealants - Assessment of the fungal growth on sealant surfaces (ISO 21265:2021)
15.01.2025 - - - AENOR
mehr dazuVon: 60,00 € -
BS EN 12209:2024 + Redline
Tracked Changes. Building hardware. Mechanically operated locks and locking plates. Characteristics and test methods
14.01.2025 - PDF - Englisch - BSI
mehr dazu559,00 € -
BS EN ISO 4064-3:2025
Water meters for cold potable water and hot Test report format
13.01.2025 - PDF - Englisch - BSI
mehr dazu399,00 € -
ISO 12628:2022/DAmd 1:2025
Thermal insulating products for building equipment and industrial installations — Determination of dimensions, squareness and linearity of preformed pipe insulation
11.01.2025 - - - ISO
mehr dazu21,00 € -
25/30453822 DC:2025
BS EN IEC 62056-8-11 Electricity metering data exchange – The DLMS/COSEM suite Part 8-11: Communication profile for Wi-SUN field area mesh networks
10.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN 1170:2024
Precast concrete products. Test methods for glassfibre reinforced concrete
10.01.2025 - PDF - Englisch - BSI
mehr dazu266,00 € -
ISO/DIS 13272:2025
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
10.01.2025 - Papier - Englisch - ISO
mehr dazu75,00 € -
25/30476615 DC:2025
BS ISO 13272 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection chambers in traffic areas and underground installations
10.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN 15685:2024
Building hardware. Requirements and test methods. Multipoint locks, latches and locking plates. Characteristics and test methods
10.01.2025 - PDF - Englisch - BSI
mehr dazu399,00 € -
BS EN 12209:2024
Building hardware. Mechanically operated locks and locking plates. Characteristics and test methods
10.01.2025 - PDF - Englisch - BSI
mehr dazu399,00 € -
25/30499792 DC:2025
BS EN 1364-4 Fire resistance tests for non-loadbearing elements Part 4: Curtain walling - configuration
09.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30497895 DC:2025
BS EN 18136 Ground limestone for concrete Part 1: Definition, specifications and conformity criteria
09.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30499938 DC:2025
BS EN 15665 Ventilation for buildings - Ventilation systems in residential buildings - Design
09.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN ISO 4917-5:2025
Auslegung von Kernkraftwerken gegen seismische Ereignisse — Teil 5: Seismische Instrumentierung
09.01.2025 - PDF - Englisch - NBN
mehr dazu58,00 € -
NBN EN ISO 10077-2:2017/A1:2025
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Amendment 1 (ISO 10077-2:2017/Amd1:2024)
08.01.2025 - - - NBN
mehr dazu20,00 € -
75,00 €
-
163,00 €
-
NBN EN ISO 4064-4:2025
Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2024)
08.01.2025 - - - NBN
mehr dazu145,00 € -
NBN EN ISO 4064-3:2025
Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)
08.01.2025 - - - NBN
mehr dazu187,00 € -
NBN EN 14501:2021+A1:2025
Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification
08.01.2025 - - - NBN
mehr dazu163,00 € -
ISO/TR 18961:2025
Buildings and civil engineering works — Seismic resilience assessment and strategies — Compilation of relevant information
07.01.2025 - Papier - Englisch - ISO
mehr dazu113,00 € -
ISO/TR 5863:2025
Integrative design of the building envelope — General principles
07.01.2025 - Papier - Englisch - ISO
mehr dazu113,00 € -
ISO 13315-2:2025
Environmental management for concrete and concrete structures
07.01.2025 - Papier - Englisch - ISO
mehr dazu178,00 € -
25/30484498 DC:2025
BS 6229 Flat roofs with continuously supported flexible waterproof coverings. Code of practice
06.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN 12978:2024 + Redline
Tracked Changes. Industrial, commercial and garage doors and gates and pedestrian doorsets. Protective devices for power operated doors and gates. Requirements and test methods
06.01.2025 - PDF - Englisch - BSI
mehr dazu438,00 € -
BS EN 15191:2024 + Redline
Tracked Changes. Precast concrete products. Classification of glassfibre reinforced concrete performance
06.01.2025 - PDF - Englisch - BSI
mehr dazu438,00 € -
25/30489703 DC:2025
BS EN ISO 11300-2 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 2: Thermoset composite materials
06.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
ISO/DIS 11300-2:2025
Piping systems for rehabilitation of underground drains, sewers and water supply networks
06.01.2025 - - - ISO
mehr dazu75,00 € -
25/30486198 DC:2025
BS EN ISO 11300-1 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 1: Polyethylene (PE) material
03.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
25/30486202 DC:2025
BS EN ISO 11300-3 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material
03.01.2025 - PDF - Englisch - BSI
mehr dazu24,00 € -
ISO/DIS 11300-1:2025
Piping systems for rehabilitation of underground drains, sewers and water supply networks
03.01.2025 - - - ISO
mehr dazu75,00 € -
ISO/DIS 11300-3:2025
Piping systems for rehabilitation of underground drains, sewers and water supply networks
03.01.2025 - - - ISO
mehr dazu75,00 € -
DIN EN 17632-2:2025-01
Building Information Modelling (BIM) - Semantic modelling and linking (SML) - Part 2: Domain-specific modelling patterns, German version EN 17632-2:2024
01.01.2025 - PDF - Deutsche - DIN
mehr dazu157,29 € -
DIN EN ISO 29481-1:2025-01
Building information models - Information delivery manual - Part 1: Methodology and format (ISO/DIS 29481-1:2024), German and English version prEN ISO 29481-1:2024
01.01.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu130,09 € -
XP CEN/TS 16629, P52-629 (01/2025)
Performance énergétique des bâtiments - Règles techniques détaillées pour la série de normes sur la performance énergétique des bâtiments
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu100,50 € -
ASTM C904-25
Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
01.01.2025 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM C904-25 + Redline
Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
01.01.2025 - PDF - Englisch - ASTM
mehr dazu73,00 € -
DIN EN 1364-4:2025-01
Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration, German and English version prEN 1364-4:2024
01.01.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu152,52 € -
DIN EN 15254-5:2025-01
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction, German and English version prEN 15254-5:2024
01.01.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu88,41 € -
ASTM C219-25
Standard Terminology Relating to Hydraulic and Other Inorganic Cements
01.01.2025 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM C219-25 + Redline
Standard Terminology Relating to Hydraulic and Other Inorganic Cements
01.01.2025 - PDF - Englisch - ASTM
mehr dazu73,00 € -
ASTM C780-25
Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
01.01.2025 - PDF - Englisch - ASTM
mehr dazu76,00 € -
ASTM C780-25 + Redline
Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
01.01.2025 - PDF - Englisch - ASTM
mehr dazu91,00 € -
DIN CEN/TS 1090-201:2025-01
Execution of steel structures and aluminium structures - Reuse of structural steel, German version CEN/TS 1090-201:2024
01.01.2025 - PDF - Deutsche - DIN
mehr dazu82,06 € -
DIN EN 1366-10:2025-01
Fire resistance tests for service installations - Part 10: Smoke control dampers, German version EN 1366-10:2022+A1:2024.
01.01.2025 - PDF - Deutsche - DIN
mehr dazu190,09 € -
DIN EN 13381-11:2025-01
Test methods for determining the contribution to the fire resistance of structural members - Part 11: Applied protection to solid steel bars in tension based on mechanically loaded fire tests, German and English version prEN 13381-11:2025
01.01.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu168,69 € -
DIN EN 18136:2025-01
Ground limestone for concrete - Part 1: Definition, specifications and conformity criteria, German and English version prEN 18136:2025
01.01.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu95,42 € -
PR NF EN ISO 15957, X44-068PR (01/2025)
Poussières d'essai pour l'évaluation des équipements d'épuration d'air
01.01.2025 - Papier - Englisch, Französisch - AFNOR
mehr dazu76,50 € -
76,00 €
-
91,00 €
-
ASTM C1194-25
Standard Test Method for Compressive Strength of Architectural Cast Stone
01.01.2025 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM C1194-25 + Redline
Standard Test Method for Compressive Strength of Architectural Cast Stone
01.01.2025 - PDF - Englisch - ASTM
mehr dazu73,00 € -
ASTM C880/C880M-25
Standard Test Method for Flexural Strength of Dimension Stone
01.01.2025 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM C880/C880M-25 + Redline
Standard Test Method for Flexural Strength of Dimension Stone
01.01.2025 - PDF - Englisch - ASTM
mehr dazu73,00 € -
DIN EN 15254-7:2025-01
Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction, German and English version prEN 15254-7:2024
01.01.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu88,41 € -
PR NF EN 17160, P61-550PR (01/2025)
Règles de définition des catégories de produits pour les carreaux céramiques
01.01.2025 - Papier - Englisch, Französisch - AFNOR
mehr dazu83,00 € -
66,50 €
-
NF EN 13084-1, P51-501 (01/2025)
Cheminées autoportantes - Partie 1 : exigences générales
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu111,50 € -
NF P94-327 (01/2025)
Exécution des travaux géotechniques spéciaux - Ouvrages gabions en panneaux électrosoudés
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu159,50 € -
NF P43-015 (01/2025)
Robinetterie de bâtiment - Robinets de puisage à soupape - Spécifications techniques générales
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu70,50 € -
DIN EN 12608-4:2025-01
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils, German version EN 12608-4:2024
01.01.2025 - PDF - Deutsche - DIN
mehr dazu40,56 € -
ASTM F900-25
Standard Specification for Industrial and Commercial Swing Gates
01.01.2025 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM F900-25 + Redline
Standard Specification for Industrial and Commercial Swing Gates
01.01.2025 - PDF - Englisch - ASTM
mehr dazu73,00 € -
ASTM C1780-25
Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
01.01.2025 - PDF - Englisch - ASTM
mehr dazu69,00 € -
ASTM C1780-25 + Redline
Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
01.01.2025 - PDF - Englisch - ASTM
mehr dazu83,00 € -
NF EN ISO 4064-3, E17-002-3 (01/2025)
Compteurs d'eau potable froide et d'eau chaude - Partie 3 : format du rapport d'essai
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu144,00 € -
NF EN ISO 4064-4, E17-002-4 (01/2025)
Compteurs d'eau potable froide et d'eau chaude - Partie 4 : exigences non métrologiques non couvertes par l'ISO 4064-1
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu92,50 € -
ASTM C125-25
Standard Terminology Relating to Concrete and Concrete Aggregates
01.01.2025 - PDF - Englisch - ASTM
mehr dazu69,00 € -
ASTM C125-25 + Redline
Standard Terminology Relating to Concrete and Concrete Aggregates
01.01.2025 - PDF - Englisch - ASTM
mehr dazu83,00 € -
DIN EN 12607-1:2025-01
Bitumens and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method, German version EN 12607-1:2024
01.01.2025 - PDF - Deutsche - DIN
mehr dazu82,15 € -
DIN EN 1426:2025-01
Bitumens and bituminous binders - Determination of needle penetration, German version EN 1426:2024
01.01.2025 - PDF - Deutsche - DIN
mehr dazu82,15 € -
FD CEN/TR 18114, T65-041 (01/2025)
Bitumes et liants bitumineux - Développement durable -Revue de la manière de prendre en compte les informations sur l'environnement
01.01.2025 - Papier - Französisch - AFNOR
mehr dazu80,50 € -
PR NF EN 16383, P75-229PR (01/2025)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'étanchéité à l'eau des kits composites d'isolation thermique extérieure avec un système d'enduit (kits ETICS)
01.01.2025 - Papier - Englisch, Französisch - AFNOR
mehr dazu76,50 € -
PR NF EN 16382, P75-481PR (01/2025)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance au déboutonnage des chevilles à rosace plane ou hélicoïdales dans les produits isolants thermiques
01.01.2025 - Papier - Englisch, Französisch - AFNOR
mehr dazu76,50 € -
ASTM F793/F793M-25
Standard Classification of Wall Coverings and Ceiling Coverings by Use Characteristics
01.01.2025 - PDF - Englisch - ASTM
mehr dazu69,00 € -
ASTM F793/F793M-25 + Redline
Standard Classification of Wall Coverings and Ceiling Coverings by Use Characteristics
01.01.2025 - PDF - Englisch - ASTM
mehr dazu83,00 € -
ASTM F1141/F1141M-25
Standard Specification for Wall Coverings and Ceiling Coverings
01.01.2025 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM F1141/F1141M-25 + Redline
Standard Specification for Wall Coverings and Ceiling Coverings
01.01.2025 - PDF - Englisch - ASTM
mehr dazu73,00 € -
75,00 €
-
UNE 41805-9:2024
Building diagnosis. Part 9: Pathological Study of the buildings. Roofings.
26.12.2024 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN 12665:2024
Light and lighting - Basic terms and criteria for specifying lighting requirements
26.12.2024 - - - AENOR
mehr dazuVon: 115,00 € -
UNE-EN 17956:2024
Energy efficiency classes for technical insulation systems - Calculation method and applications
26.12.2024 - - - AENOR
mehr dazuVon: 73,00 € -
UNE 60670-6:2023/1M:2024
Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 6: Configuration, ventilation and evacuation of the combustion products requirements for the premises for gas appliances.
26.12.2024 - PDF - Spanisch - AENOR
mehr dazu17,00 € -
UNE 192008-1:2024
Procedure for the regulatory inspection. Lifts. Part 1: Lifting appliances gathered in legislation of lifts
26.12.2024 - PDF - Spanisch - AENOR
mehr dazu183,00 € -
ISO 52016-3:2023/DAmd 1:2024
Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 3: Calculation procedures regarding adaptive building envelope elements
24.12.2024 - - - ISO
mehr dazu21,00 € -
25/30488413 DC:2024
BS EN ISO 52016-3:2023/Amd 1 Energy performance of buildings — needs for heating and cooling, internal temperatures sensible latent heat loads Part 3: Calculation procedures regarding adaptive building envelope elements - Amendment 1: Editorial corrections technical revision Annex C Reference control scenarios with dynamic solar shading or chromogenic glazing
24.12.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN 15191:2024
Precast concrete products. Classification of glassfibre reinforced concrete performance
23.12.2024 - PDF - Englisch - BSI
mehr dazu162,00 € -
ISO/DIS 19432-2:2024
Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines
23.12.2024 - - - ISO
mehr dazu75,00 € -
25/30467099 DC:2024
BS EN ISO 19432-2 Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines Part 2: Machines for chains Safety requirements
23.12.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
370,00 €
-
PD CEN/TS 19100-2:2021
Design of glass structures out-of-plane loaded components
20.12.2024 - PDF - Englisch - BSI
mehr dazu312,00 € -
PD CEN/TS 19100-3:2021
Design of glass structures in-plane loaded components and their mechanical joints
20.12.2024 - PDF - Englisch - BSI
mehr dazu312,00 € -
CEN/TS 18113:2024
Anleitung zur Umsetzung der EN-ISO-19650-Reihe in Europa, insbesondere der Teile 1, 2, 3, 4 und 5
19.12.2024 - PDF - Englisch - NBN
mehr dazu184,00 € -
142,00 €
-
24/30488539 DC:2024
BS EN 15254-5 Extended application of results from fire resistance tests - Non-loadbearing walls Part 5: Metal sandwich panel construction
19.12.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
IEEE 693a:2024
IEEE Recommended Practice for Seismic Design of Substations Amendment 1: Alterations of Transformers and Select Appendages, Surge Arresters, Response Spectra, Time Histories, and Their Qualification Methodologies
19.12.2024 - PDF - Englisch - IEEE
mehr dazu77,00 € -
IEEE 693a:2024
IEEE Recommended Practice for Seismic Design of Substations Amendment 1: Alterations of Transformers and Select Appendages, Surge Arresters, Response Spectra, Time Histories, and Their Qualification Methodologies
19.12.2024 - Papier - Englisch - IEEE
mehr dazu96,00 € -
24/30500839 DC:2024
BS EN 15254-7 Extended application of results from fire resistance tests - Non-loadbearing ceilings Part 7: Metal sandwich panel construction
19.12.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
IEC 60364-4-44:2024
IEC 60364-4-44:2024 Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
19.12.2024 - - - IEC
mehr dazuVon: 371,00 € -
IEC 60364-4-44:2024 + Redline
IEC 60364-4-44:2024 (Redline version) Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
19.12.2024 - - - IEC
mehr dazuVon: 371,00 € -
NBN EN 1170:2024
Precast concrete products - Test methods for glassfibre reinforced concrete
19.12.2024 - - - NBN
mehr dazu121,00 € -
NBN EN 1169:2024
Precast concrete products - General rules for production control of glassfibre reinforced concrete
19.12.2024 - - - NBN
mehr dazu121,00 € -
NBN EN 15191:2024
Precast concrete products - Classification of glassfibre reinforced concrete performance
19.12.2024 - - - NBN
mehr dazu58,00 €