81 : Glas- und Keramikindustrie ICS -Navigation, Veröffentlicht von: AENOR

UNE-EN 17839:2024

Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools
16.10.2024 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 17871:2024

Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool.
16.10.2024 - - - AENOR
mehr dazu

Von: 60,00 €

UNE-EN 12758:2020+A1:2024

Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
24.01.2024 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 15434-1:2023

Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
20.12.2023 - - - AENOR
mehr dazu

Von: 92,00 €

UNE-EN 17635:2023

Glass in building - Shatter properties - Requirements and assessment methods
20.12.2023 - - - AENOR
mehr dazu

Von: 64,00 €

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders (ISO 23739:2021) (Endorsed by Asociación Española de Normalización in October of 2023.)
06.10.2023 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN ISO 17092:2023

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions (ISO 17092:2005) (Endorsed by Asociación Española de Normalización in May of 2023.)
05.05.2023 - PDF - Englisch - AENOR
mehr dazu

58,00 €

UNE-EN ISO 20509:2023

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics (ISO 20509:2003) (Endorsed by Asociación Española de Normalización in May of 2023.)
05.05.2023 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN ISO 24370:2023

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005) (Endorsed by Asociación Española de Normalización in May of 2023.)
05.05.2023 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN ISO 17947:2023

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders (ISO 17947:2014) (Endorsed by Asociación Española de Normalización in May of 2023.)
05.05.2023 - PDF - Englisch - AENOR
mehr dazu

75,00 €

UNE-EN ISO 21813:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of high purity barium titanate powders (ISO 21813:2019) (Endorsed by Asociación Española de Normalización in December of 2022.)
12.10.2022 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE-EN ISO 21814:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of aluminium nitride powders (ISO 21814:2019) (Endorsed by Asociación Española de Normalización in January of 2023.)
12.10.2022 - PDF - Englisch - AENOR
mehr dazu

76,00 €

UNE-EN ISO 21821:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of densification properties of ceramic powders on natural sintering (ISO 21821:2019) (Endorsed by Asociación Española de Normalización in January of 2023.)
12.10.2022 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN ISO 20504:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO 20504:2022) (Endorsed by Asociación Española de Normalización in January of 2023.)
12.10.2022 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN ISO 20501:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data (ISO 20501:2019) (Endorsed by Asociación Española de Normalización in February of 2023.)
12.10.2022 - PDF - Englisch - AENOR
mehr dazu

76,00 €

UNE-EN ISO 12543-3:2022

Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
13.07.2022 - - - AENOR
mehr dazu

Von: 58,00 €

UNE-EN ISO 12543-4:2022

Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2021)
13.07.2022 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN ISO 12543-6:2022

Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
13.07.2022 - - - AENOR
mehr dazu

Von: 58,00 €

UNE-EN ISO 12543-2:2022

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2021)
13.07.2022 - - - AENOR
mehr dazu

Von: 58,00 €

UNE-EN ISO 12543-1:2022

Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
13.07.2022 - - - AENOR
mehr dazu

Von: 60,00 €

UNE-EN ISO 12543-5:2022

Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
13.07.2022 - - - AENOR
mehr dazu

Von: 61,00 €

UNE-EN ISO 18754:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020) (Endorsed by Asociación Española de Normalización in June of 2022.)
01.06.2022 - PDF - Englisch - AENOR
mehr dazu

59,00 €

UNE-EN ISO 19629:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018) (Endorsed by Asociación Española de Normalización in June of 2022.)
01.06.2022 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN ISO 17138:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength (ISO 17138:2014) (Endorsed by Asociación Española de Normalización in May of 2022.)
01.05.2022 - PDF - Englisch - AENOR
mehr dazu

15,00 €

UNE-EN ISO 17139:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014) (Endorsed by Asociación Española de Normalización in May of 2022.)
01.05.2022 - PDF - Englisch - AENOR
mehr dazu

15,00 €

UNE-EN ISO 18608:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of the resistance to crack propagation by notch sensitivity testing (ISO 18608:2017) (Endorsed by Asociación Española de Normalización in May of 2022.)
01.05.2022 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN 16759:2022

Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces
16.03.2022 - - - AENOR
mehr dazu

Von: 85,00 €

UNE-EN 17416:2021

Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products
22.12.2021 - - - AENOR
mehr dazu

Von: 64,00 €

UNE-EN 15998:2021

Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification
08.09.2021 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN ISO 19630:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017) (Endorsed by Asociación Española de Normalización in September of 2021.)
01.09.2021 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN ISO 19634:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (ISO 19634:2017) (Endorsed by Asociación Española de Normalización in September of 2021.)
01.09.2021 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN ISO 20323:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018) (Endorsed by Asociación Española de Normalización in September of 2021.)
01.09.2021 - PDF - Englisch - AENOR
mehr dazu

75,00 €

UNE-EN ISO 17562:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique (ISO 17562:2016) (Endorsed by Asociación Española de Normalización in April of 2021.)
01.04.2021 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN ISO 14705:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016) (Endorsed by Asociación Española de Normalización in March of 2021.)
01.03.2021 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE-EN ISO 17172:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014) (Endorsed by Asociación Española de Normalización in March of 2021.)
01.03.2021 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN ISO 18610:2021

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016) (Endorsed by Asociación Española de Normalización in March of 2021.)
01.03.2021 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE-EN 993-10:2020

Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating (Endorsed by Asociación Española de Normalización in November of 2020.)
01.11.2020 - PDF - Englisch - AENOR
mehr dazu

59,00 €

UNE-EN 17074:2020

Glass in building - Environmental product declaration - Product category rules for flat glass products
03.06.2020 - - - AENOR
mehr dazu

Von: 84,00 €

UNE-EN 16612:2020

Glass in building - Determination of the lateral load resistance of glass panes by calculation
06.05.2020 - - - AENOR
mehr dazu

Von: 102,00 €

UNE-EN 16613:2020

Glass in building - Laminated glass and laminated safety glass - Determination of interlayer viscoelastic properties
29.04.2020 - - - AENOR
mehr dazu

Von: 72,00 €

UNE-EN 12150-1:2016+A1:2020

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
22.01.2020 - - - AENOR
mehr dazu

Von: 86,00 €

UNE-EN 12898:2019

Glass in building - Determination of the emissivity
13.11.2019 - - - AENOR
mehr dazu

Von: 72,00 €

UNE-EN 1096-4:2019

Glass in building - Coated glass - Part 4: Product standard
27.02.2019 - - - AENOR
mehr dazu

Von: 88,00 €

UNE-EN 1279-1:2019

Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality
30.01.2019 - - - AENOR
mehr dazu

Von: 94,00 €

UNE-EN 1279-2:2019

Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
30.01.2019 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 1279-3:2019

Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
30.01.2019 - - - AENOR
mehr dazu

Von: 75,00 €

UNE-EN 1279-4:2019

Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts
30.01.2019 - - - AENOR
mehr dazu

Von: 118,00 €

UNE-EN 1279-6:2019

Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests
30.01.2019 - - - AENOR
mehr dazu

Von: 111,00 €

UNE-EN 1279-5:2019

Glass in building - Insulating glass units - Part 5: Product standard
30.01.2019 - - - AENOR
mehr dazu

Von: 91,00 €

UNE-EN 993-1:2018

Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
01.01.2019 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN 993-5:2018

Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength (Endorsed by Asociación Española de Normalización in January of 2019.)
01.01.2019 - PDF - Englisch - AENOR
mehr dazu

59,00 €

UNE-EN 993-6:2018

Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature (Endorsed by Asociación Española de Normalización in January of 2019.)
01.01.2019 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE 135334:2018

Vertical signing. Retroreflective sheetings with glass beads. Characteristics and test methods.
18.04.2018 - PDF - Spanisch - AENOR
mehr dazu

60,00 €

UNE-EN ISO 18753:2017

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) (Endorsed by Asociación Española de Normalización in November of 2017.)
01.11.2017 - PDF - Englisch - AENOR
mehr dazu

46,00 €

UNE-EN 15681-2:2017

Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
26.07.2017 - - - AENOR
mehr dazu

Von: 81,00 €

UNE-EN 15681-1:2017

Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
26.04.2017 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 14179-1:2017

Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
12.04.2017 - - - AENOR
mehr dazu

Von: 97,00 €

UNE-EN 16477-1:2017

Glass in building - Painted glass for internal use - Part 1: Requirements
12.04.2017 - - - AENOR
mehr dazu

Von: 77,00 €

UNE-EN 12488:2017

Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
12.04.2017 - - - AENOR
mehr dazu

Von: 94,00 €

UNE-EN 1096-5:2017

Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
08.03.2017 - - - AENOR
mehr dazu

Von: 83,00 €

UNE-EN 572-1:2012+A1:2017

Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
08.03.2017 - - - AENOR
mehr dazu

Von: 60,00 €

UNE-EN ISO 13383-2:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 2: Determination of phase volume fraction by evaluation of micrographs (ISO 13383-2:2012) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN 572-8:2013+A1:2016

Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
01.06.2016 - - - AENOR
mehr dazu

Von: 74,00 €

UNE-EN ISO 23145-2:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

46,00 €

UNE-EN ISO 14604:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of fracture strain (ISO 14604:2012) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN ISO 18452:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

58,00 €

UNE-EN ISO 17161:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

59,00 €

UNE-EN ISO 26423:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN ISO 17142:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN ISO 26424:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN ISO 20502:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

74,00 €

UNE-EN ISO 17140:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN ISO 13383-1:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

70,00 €

UNE-EN ISO 14629:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

57,00 €

UNE-EN ISO 23145-1:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

42,00 €

UNE-EN ISO 23146:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (ISO 23146:2012) (Endorsed by AENOR in June of 2016.)
01.06.2016 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN 15991:2015

Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) (Endorsed by AENOR in January of 2016.)
01.01.2016 - PDF - Englisch - AENOR
mehr dazu

69,00 €

UNE-EN 13022-2:2015

Glass in building - Structural sealant glazing - Part 2: Assembly rules
18.11.2015 - - - AENOR
mehr dazu

Von: 88,00 €

UNE-EN 13022-1:2015

Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
18.11.2015 - - - AENOR
mehr dazu

Von: 75,00 €

UNE-EN 15752-1:2015

Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
14.01.2015 - - - AENOR
mehr dazu

Von: 83,00 €

UNE-EN 15755-1:2015

Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
07.01.2015 - - - AENOR
mehr dazu

Von: 76,00 €

UNE-EN ISO 10081-4:2014

Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014) (Endorsed by AENOR in November of 2014.)
01.11.2014 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE 67001:2014

Ceramic sanitary ware. Technical specifications
15.10.2014 - PDF - Spanisch - AENOR
mehr dazu

53,00 €

UNE-EN 15682-2:2014

Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
03.09.2014 - - - AENOR
mehr dazu

Von: 82,00 €

UNE-EN 15683-1:2014

Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description
03.09.2014 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 15683-2:2014

Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
03.09.2014 - - - AENOR
mehr dazu

Von: 81,00 €

UNE-EN 15682-1:2014

Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description
16.07.2014 - - - AENOR
mehr dazu

Von: 88,00 €

UNE-EN 1423:2013/AC:2013

Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
17.04.2013 - - - AENOR
mehr dazu

0,00 €

UNE-EN ISO 14720-1:2013

Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013) (Endorsed by AENOR in April of 2013.)
01.04.2013 - PDF - Englisch - AENOR
mehr dazu

58,00 €

UNE-EN ISO 14720-2:2013

Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow (ISO 14720-2:2013) (Endorsed by AENOR in April of 2013.)
01.04.2013 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN 1423:2013

Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
06.02.2013 - - - AENOR
mehr dazu

Von: 115,00 €

UNE-EN ISO 1927-5:2012

Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces (ISO 1927-5:2012) (Endorsed by AENOR in February of 2013.)
01.02.2013 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN ISO 1927-6:2012

Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012) (Endorsed by AENOR in February of 2013.)
01.02.2013 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN ISO 1927-7:2012

Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes (ISO 1927-7:2012) (Endorsed by AENOR in February of 2013.)
01.02.2013 - PDF - Englisch - AENOR
mehr dazu

69,00 €

UNE-EN ISO 1927-8:2012

Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties (ISO 1927-8:2012) (Endorsed by AENOR in February of 2013.)
01.02.2013 - PDF - Englisch - AENOR
mehr dazu

38,00 €

UNE-EN ISO 1927-2:2012

Monolithic (unshaped) refractory products - Part 2: Sampling for testing (ISO 1927-2:2012) (Endorsed by AENOR in January of 2013.)
01.01.2013 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN ISO 1927-3:2012

Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO 1927-3:2012) (Endorsed by AENOR in January of 2013.)
01.01.2013 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN ISO 1927-4:2012

Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012) (Endorsed by AENOR in January of 2013.)
01.01.2013 - PDF - Englisch - AENOR
mehr dazu

57,00 €

UNE-EN 572-2:2012

Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
14.11.2012 - - - AENOR
mehr dazu

Von: 60,00 €

UNE-EN 572-7:2012

Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
14.11.2012 - - - AENOR
mehr dazu

Von: 54,00 €

UNE-EN 572-6:2012

Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
14.11.2012 - - - AENOR
mehr dazu

Von: 54,00 €

UNE-EN 572-3:2012

Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
17.10.2012 - - - AENOR
mehr dazu

Von: 53,00 €

UNE-EN 572-4:2012

Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
17.10.2012 - - - AENOR
mehr dazu

Von: 54,00 €

UNE-EN 572-5:2012

Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
17.10.2012 - - - AENOR
mehr dazu

Von: 53,00 €

UNE-EN ISO 1927-1:2012

Monolithic (unshaped) refractory products - Part 1: Introduction and classification (ISO 1927-1:2012) (Endorsed by AENOR in September of 2012.)
01.09.2012 - PDF - Englisch - AENOR
mehr dazu

58,00 €

UNE-EN 13541:2012

Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
03.05.2012 - - - AENOR
mehr dazu

Von: 53,00 €

UNE-EN 1863-1:2012

Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
25.04.2012 - - - AENOR
mehr dazu

Von: 77,00 €

UNE-EN 1096-3:2012

Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
18.04.2012 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-ISO 22197-1:2012

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Part 1: Removal of nitric oxide
18.04.2012 - PDF - Spanisch - AENOR
mehr dazu

61,00 €

UNE-EN 1096-2:2012

Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
04.04.2012 - - - AENOR
mehr dazu

Von: 75,00 €

UNE-EN 1096-1:2012

Glass in building - Coated glass - Part 1: Definitions and classification
21.03.2012 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 13024-1:2012

Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description
29.02.2012 - - - AENOR
mehr dazu

Von: 80,00 €

UNE-EN ISO 12677:2012

Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011)
15.02.2012 - - - AENOR
mehr dazu

Von: 129,00 €

UNE-EN ISO 14719:2011

Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) (Endorsed by AENOR in January of 2012.)
01.01.2012 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE 304101:2011

Freeze test for enamelleed pots.
14.12.2011 - PDF - Spanisch - AENOR
mehr dazu

26,00 €

UNE-EN 410:2011 ERRATUM:2011

Glass in building - Determination of luminous and solar characteristics of glazing
08.11.2011 - PDF - Spanisch - AENOR
mehr dazu

0,00 €

UNE-EN 674:2011

Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method
14.09.2011 - - - AENOR
mehr dazu

Von: 58,00 €

UNE-EN 675:2011

Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
14.09.2011 - - - AENOR
mehr dazu

Von: 60,00 €

UNE-EN 410:2011

Glass in building - Determination of luminous and solar characteristics of glazing
13.07.2011 - - - AENOR
mehr dazu

Von: 111,00 €

UNE-EN 12150-2:2005 ERRATUM:2011

Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
29.06.2011 - PDF - Spanisch - AENOR
mehr dazu

0,00 €

UNE-EN 12600:2003 ERRATUM:2011

Glass in building - Pendulum test - Impact test method and classification for flat glass.
29.06.2011 - PDF - Spanisch - AENOR
mehr dazu

0,00 €

UNE-EN 673:2011

Glass in building - Determination of thermal transmittance (U value) - Calculation method
18.05.2011 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 15979:2011

Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation (Endorsed by AENOR in March of 2011.)
01.03.2011 - PDF - Englisch - AENOR
mehr dazu

68,00 €

UNE-EN ISO 8894-1:2010

Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
13.10.2010 - - - AENOR
mehr dazu

Von: 71,00 €

UNE-EN 843-7:2010

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests (Endorsed by AENOR in August of 2010.)
01.08.2010 - PDF - Englisch - AENOR
mehr dazu

58,00 €

UNE-EN 843-8:2010

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests (Endorsed by AENOR in August of 2010.)
01.08.2010 - PDF - Englisch - AENOR
mehr dazu

58,00 €

UNE-EN 1007-7:2010

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature (Endorsed by AENOR in August of 2010.)
01.08.2010 - PDF - Englisch - AENOR
mehr dazu

70,00 €

UNE-EN 15365:2010

Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method (Endorsed by AENOR in August of 2010.)
01.08.2010 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN 1071-12:2010

Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test (Endorsed by AENOR in May of 2010.)
01.05.2010 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE-EN 1071-13:2010

Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method (Endorsed by AENOR in May of 2010.)
01.05.2010 - PDF - Englisch - AENOR
mehr dazu

68,00 €

UNE-EN 13367:2006+A1:2008/AC:2010

Ceramic machines - Safety - Transfer platforms and cars
21.04.2010 - - - AENOR
mehr dazu

0,00 €

UNE-EN 13035-9:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (Endorsed by AENOR in April of 2010.)
01.04.2010 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN 13035-11:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (Endorsed by AENOR in April of 2010.)
01.04.2010 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN ISO 9100-2:2006/AC:2010

Glass containers - Vacuum lug finishes - Part 2: 33 medium - Technical Corrigendum 1 (ISO 9100-2:2005/Cor 1:2009)
24.02.2010 - - - AENOR
mehr dazu

0,00 €

UNE-EN 13035-4:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (Endorsed by AENOR in February of 2010.)
01.02.2010 - PDF - Englisch - AENOR
mehr dazu

68,00 €

UNE-EN 13035-5:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (Endorsed by AENOR in February of 2010.)
01.02.2010 - PDF - Englisch - AENOR
mehr dazu

70,00 €

UNE-EN 13035-6:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (Endorsed by AENOR in February of 2010.)
01.02.2010 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN 13035-7:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (Endorsed by AENOR in January of 2010.)
01.01.2010 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN 14232:2009

Advanced technical ceramics - Terms, definitions and abbreviations (Endorsed by AENOR in December of 2009.)
01.12.2009 - PDF - Englisch - AENOR
mehr dazu

131,00 €

UNE-EN 13042-1:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (Endorsed by AENOR in December of 2009.)
01.12.2009 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN 843-6:2009

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation (Endorsed by AENOR in October of 2009.)
01.10.2009 - PDF - Englisch - AENOR
mehr dazu

80,00 €

UNE-EN 13035-3:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (Endorsed by AENOR in October of 2009.)
01.10.2009 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE-EN 13042-3:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (Endorsed by AENOR in October of 2009.)
01.10.2009 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN 1036-2:2009

Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity, product standard
16.09.2009 - - - AENOR
mehr dazu

Von: 79,00 €

UNE-EN 1006:2009

Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties (Endorsed by AENOR in September of 2009.)
01.09.2009 - PDF - Englisch - AENOR
mehr dazu

57,00 €

UNE-EN 1071-10:2009

Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning (Endorsed by AENOR in September of 2009.)
01.09.2009 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN 820-4:2009

Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures (Endorsed by AENOR in September of 2009.)
01.09.2009 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN 820-5:2009

Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures (Endorsed by AENOR in September of 2009.)
01.09.2009 - PDF - Englisch - AENOR
mehr dazu

69,00 €

UNE-EN 13042-2:2004+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (Endorsed by AENOR in September of 2009.)
01.09.2009 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN 13042-5:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (Endorsed by AENOR in September of 2009.)
01.09.2009 - PDF - Englisch - AENOR
mehr dazu

68,00 €

UNE 400902:2009

Ceramic decorative products. Not enamelled fired clay elements for gardening. Test of liability to frost damage
08.07.2009 - PDF - Spanisch - AENOR
mehr dazu

26,00 €

UNE-EN 13102:2006+A1:2009

Ceramic machines - Safety - Loading and unloading of fine clay tiles
27.05.2009 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN ISO 20565-1:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 20565-1:2008) (Endorsed by AENOR in February of 2009.)
01.02.2009 - PDF - Englisch - AENOR
mehr dazu

69,00 €

UNE-EN ISO 20565-2:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 20565-2:2008) (Endorsed by AENOR in February of 2009.)
01.02.2009 - PDF - Englisch - AENOR
mehr dazu

72,00 €

UNE-EN ISO 20565-3:2008

Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 20565-3:2008) (Endorsed by AENOR in February of 2009.)
01.02.2009 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN 13367:2006+A1:2008

Ceramic machines - Safety - Transfer platforms and cars
03.12.2008 - - - AENOR
mehr dazu

Von: 79,00 €

UNE-EN 1094-1:2008

Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products (Endorsed by AENOR in September of 2008.)
01.09.2008 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN ISO 1893:2008

Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007) (Endorsed by AENOR in August of 2008.)
01.08.2008 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN ISO 9100-3:2006 ERRATUM:2008

Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005)
23.07.2008 - PDF - Spanisch - AENOR
mehr dazu

0,00 €

UNE-EN ISO 9100-4:2006 ERRATUM:2008

Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
23.07.2008 - PDF - Spanisch - AENOR
mehr dazu

0,00 €

UNE-EN ISO 21587-2:2008

Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21587-2:2007)
02.07.2008 - - - AENOR
mehr dazu

Von: 71,00 €

UNE-EN ISO 21587-3:2008

Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)
02.07.2008 - - - AENOR
mehr dazu

Von: 72,00 €

UNE-EN 993-11:2008

Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
02.07.2008 - - - AENOR
mehr dazu

Von: 53,00 €

UNE-EN ISO 21079-1:2008

Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008) (Endorsed by AENOR in June of 2008.)
01.06.2008 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN ISO 21079-2:2008

Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21079-2:2008) (Endorsed by AENOR in June of 2008.)
01.06.2008 - PDF - Englisch - AENOR
mehr dazu

66,00 €

UNE-EN ISO 21079-3:2008

Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES) (ISO 21079-3:2008) (Endorsed by AENOR in June of 2008.)
01.06.2008 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN ISO 16282:2008

Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007) (Endorsed by AENOR in June of 2008.)
01.06.2008 - PDF - Englisch - AENOR
mehr dazu

59,00 €

UNE-EN ISO 26845:2008

Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008) (Endorsed by AENOR in May of 2008.)
01.05.2008 - PDF - Englisch - AENOR
mehr dazu

63,00 €

UNE-EN 13035-1:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory (Endorsed by AENOR in April of 2008.)
01.04.2008 - PDF - Englisch - AENOR
mehr dazu

87,00 €

UNE-EN 13035-2:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory (Endorsed by AENOR in April of 2008.)
01.04.2008 - PDF - Englisch - AENOR
mehr dazu

69,00 €

UNE-EN ISO 21078-2:2008

Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components (ISO 21078-2:2006)
12.03.2008 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN 1036-1:2008

Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
12.03.2008 - - - AENOR
mehr dazu

Von: 73,00 €

UNE-EN ISO 21587-1:2008

Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica (ISO 21587-1:2007)
05.03.2008 - - - AENOR
mehr dazu

Von: 69,00 €

UNE-EN ISO 21078-1:2008

Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) (Endorsed by AENOR in March of 2008.)
01.03.2008 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN 1051-2:2008

Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard
13.02.2008 - - - AENOR
mehr dazu

Von: 86,00 €

UNE-EN 1007-6:2007

Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature (Endorsed by AENOR in January of 2008.)
01.01.2008 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE-EN 725-1:2007

Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina (Endorsed by AENOR in November of 2007.)
01.11.2007 - PDF - Englisch - AENOR
mehr dazu

57,00 €

UNE-CEN/TS 15658:2007

Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method (Endorsed by AENOR in November of 2007.)
01.11.2007 - PDF - Englisch - AENOR
mehr dazu

60,00 €

UNE-EN 725-5:2007/AC:2007

Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution (Endorsed by AENOR in October of 2007.)
01.10.2007 - PDF - Englisch - AENOR
mehr dazu

0,00 €

UNE-EN ISO 12680-1:2007

Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)
12.09.2007 - - - AENOR
mehr dazu

Von: 62,00 €

UNE-EN 15335:2007

Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C (Endorsed by AENOR in July of 2007.)
01.07.2007 - PDF - Englisch - AENOR
mehr dazu

71,00 €

UNE 67100:2007

Bathroom accesories. Definitions, general characteristics and tests.
27.06.2007 - PDF - Spanisch - AENOR
mehr dazu

69,00 €

UNE-EN 725-3:2007

Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas (Endorsed by AENOR in March of 2007.)
01.03.2007 - PDF - Englisch - AENOR
mehr dazu

35,00 €

UNE-EN 725-5:2007

Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution (Endorsed by AENOR in March of 2007.)
01.03.2007 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN ISO 8895:2007

Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004)
03.01.2007 - - - AENOR
mehr dazu

Von: 40,00 €

UNE-EN 13235:2006

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour (Endorsed by AENOR in January of 2007.)
01.01.2007 - PDF - Englisch - AENOR
mehr dazu

62,00 €

UNE-EN 15158:2006

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude (Endorsed by AENOR in January of 2007.)
01.01.2007 - PDF - Englisch - AENOR
mehr dazu

64,00 €

UNE-EN 843-1:2006

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength (Endorsed by AENOR in January of 2007.)
01.01.2007 - PDF - Englisch - AENOR
mehr dazu

65,00 €

UNE-EN 843-2:2006

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio (Endorsed by AENOR in January of 2007.)
01.01.2007 - PDF - Englisch - AENOR
mehr dazu

76,00 €