77.160 : Pulvermetallurgie
-
PR NF EN ISO 13947, A95-190PR (02/2024)
Poudres métalliques - Détermination de la teneur en inclusions non métalliques dans les poudres métalliques à l'aide d'une éprouvette forgée de poudre
01.02.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu56,00 € -
ASTM B883-24
Standard Specification for Metal Injection Molded (MIM) Materials
01.02.2024 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM B883-24 + Redline
Standard Specification for Metal Injection Molded (MIM) Materials
01.02.2024 - PDF - Englisch - ASTM
mehr dazu71,00 € -
ASTM B886-24
Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
01.02.2024 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM B886-24 + Redline
Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
01.02.2024 - PDF - Englisch - ASTM
mehr dazu63,00 € -
ASTM B887-24
Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
01.02.2024 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM B887-24 + Redline
Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
01.02.2024 - PDF - Englisch - ASTM
mehr dazu63,00 € -
ASTM B963-24
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
01.02.2024 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM B963-24 + Redline
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
01.02.2024 - PDF - Englisch - ASTM
mehr dazu71,00 € -
UNE-EN ISO 4491-1:2024
Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023)
24.01.2024 - PDF - Spanisch - AENOR
mehr dazu53,00 € -
UNE-EN ISO 4491-1:2024
Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023)
24.01.2024 - PDF - Englisch - AENOR
mehr dazu63,60 € -
UNE-EN ISO 4491-2:2024
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:2023)
24.01.2024 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 4491-2:2024
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:2023)
24.01.2024 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 5842:2024
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
24.01.2024 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 5842:2024
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
24.01.2024 - PDF - Englisch - AENOR
mehr dazu75,60 € -
UNE-EN ISO 3995:2024
Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
24.01.2024 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 3995:2024
Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
24.01.2024 - PDF - Englisch - AENOR
mehr dazu72,00 € -
DIN EN ISO 13947:2024-01
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO/DIS 13947:2023), German and English version prEN ISO 13947:2023
01.01.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu52,90 € -
23/30472751 DC:2023
Draft BS 13947 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
18.12.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
DIN EN ISO 2740:2023-12
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2023), German version EN ISO 2740:2023
01.12.2023 - PDF - Deutsche - DIN
mehr dazu72,80 € -
DIN EN ISO 5754:2023-12
Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023), German version EN ISO 5754:2023
01.12.2023 - PDF - Deutsche - DIN
mehr dazu45,98 € -
ASTM B923-23
Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
15.11.2023 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM B923-23 + Redline
Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
15.11.2023 - PDF - Englisch - ASTM
mehr dazu63,00 € -
90,00 €
-
108,00 €
-
BS EN ISO 5754:2023 + Redline
Tracked Changes. Sintered metal materials, excluding hardmetals. Unnotched impact test piece
10.10.2023 - PDF - Englisch - BSI
mehr dazu197,00 € -
BS EN ISO 5754:2023
Sintered metal materials, excluding hardmetals. Unnotched impact test piece
05.10.2023 - PDF - Englisch - BSI
mehr dazu151,00 € -
NBN EN ISO 5754:2023
Matériaux métalliques frittés, à l'exclusion des métaux-durs - Éprouvette non entaillée pour essai de résilience (ISO 5754:2023)
04.10.2023 - PDF - Französisch - NBN
mehr dazu37,00 € -
NBN EN ISO 5754:2023
Sintermetalle, ausgenommen Hartmetalle - Ungekerbte Probe für den Schlagzähigkeitsversuch (ISO 5754:2023)
04.10.2023 - PDF - Deutsche - NBN
mehr dazu37,00 € -
NBN EN ISO 5754:2023
Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023)
04.10.2023 - PDF - Englisch - NBN
mehr dazu37,00 € -
NF EN ISO 5754, A95-326 (10/2023)
Matériaux métalliques frittés, à l'exclusion des métaux-durs - Éprouvette non entaillée pour essai de résilience
01.10.2023 - Paper - Französisch - AFNOR
mehr dazu34,50 € -
DIN EN ISO 5842:2023-10
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022), German version EN ISO 5842:2023
01.10.2023 - PDF - Deutsche - DIN
mehr dazu72,80 € -
BS EN ISO 2740:2023 + Redline
Tracked Changes. Sintered metal materials, excluding hardmetals. Tensile test pieces
27.09.2023 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS EN ISO 2740:2023
Sintered metal materials, excluding hardmetals. Tensile test pieces
22.09.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
NBN EN ISO 2740:2023
Matériaux en métal fritté, à l'exclusion des métaux-durs - Éprouvettes pour essai de traction (ISO 2740:2023)
20.09.2023 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 2740:2023
Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe (ISO 2740:2023)
20.09.2023 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 2740:2023
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2023)
20.09.2023 - PDF - Englisch - NBN
mehr dazu58,00 € -
NF EN ISO 2740, A95-322 (09/2023)
Matériaux en métal fritté, à l'exclusion des métaux-durs - Éprouvettes pour essai de traction
01.09.2023 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
DIN EN ISO 3995:2023-09
Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023), German version EN ISO 3995:2023
01.09.2023 - PDF - Deutsche - DIN
mehr dazu65,89 € -
ASTM B962-23
Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
01.09.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM B962-23 + Redline
Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
01.09.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
ASTM B657-23
Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
01.09.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM B657-23 + Redline
Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
01.09.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
UNE-EN ISO 5755:2023
Sintered metal material - Specifications (ISO 5755:2022)
19.07.2023 - PDF - Spanisch - AENOR
mehr dazu124,00 € -
UNE-EN ISO 5755:2023
Sintered metal material - Specifications (ISO 5755:2022)
19.07.2023 - PDF - Englisch - AENOR
mehr dazu148,80 € -
BS EN ISO 3995:2023 + Redline
Tracked Changes. Metallic powders. Determination of green strength by transverse rupture of rectangular compacts
07.07.2023 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS EN ISO 5842:2023
Powder metallurgy. Hot isostatic pressing. Argon detection using gas chromatography and mass spectrometry techniques
05.07.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
DIN EN ISO 4491-1:2023-07
Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023), German version EN ISO 4491-1:2023
01.07.2023 - PDF - Deutsche - DIN
mehr dazu59,63 € -
DIN EN ISO 4491-2:2023-07
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:2023), German version EN ISO 4491-2:2023
01.07.2023 - PDF - Deutsche - DIN
mehr dazu72,80 € -
NBN EN ISO 5842:2023
Métallurgie des poudres - Pressage isostatique à chaud - Détection de l’argon par des techniques de chromatographie en phase gazeuse et de spectrométrie de masse (ISO 5842:2022)
29.06.2023 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 5842:2023
Pulvermetallurgie - Heißisostatisches Pressen - Nachweis von Argon mittels Gaschromatographie und massenspektrometrischer Techniken (ISO 5842:2022)
29.06.2023 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 5842:2023
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
29.06.2023 - PDF - Englisch - NBN
mehr dazu58,00 € -
BS EN ISO 3995:2023
Metallic powders. Determination of green strength by transverse rupture of rectangular compacts
23.06.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
NBN EN ISO 3995:2023
Poudres métalliques - Détermination de la résistance à la rupture transversale de comprimés rectangulaires à cru (ISO 3995:2023)
21.06.2023 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 3995:2023
Metallpulver - Bestimmung der Presskörperfestigkeit von Probekörpern mit rechteckigem Querschnitt unter Biegebeanspruchung (ISO 3995:2023)
21.06.2023 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 3995:2023
Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
21.06.2023 - PDF - Englisch - NBN
mehr dazu58,00 € -
NF EN ISO 3995, A95-123 (06/2023)
Poudres métalliques - Détermination de la résistance à la rupture transversale de comprimés rectangulaires à cru
01.06.2023 - Paper - Französisch - AFNOR
mehr dazu54,50 € -
NF EN ISO 5842, A95-772 (06/2023)
Métallurgie des poudres - Pressage isostatique à chaud - Détection de l'argon par des techniques de chromatographie en phase gazeuse et de spectrométrie de masse
01.06.2023 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
DIN EN ISO 3252:2023-06
Powder metallurgy - Vocabulary (ISO 3252:2023), German version EN ISO 3252:2023
01.06.2023 - PDF - Deutsche - DIN
mehr dazu120,84 € -
BS EN ISO 4491-2:2023 + Redline
Tracked Changes. Metallic powders. Determination of oxygen content by reduction methods Loss mass on hydrogen (hydrogen loss)
17.05.2023 - PDF - Englisch - BSI
mehr dazu235,00 € -
ASTM B610-23
Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
15.05.2023 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM B610-23 + Redline
Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
15.05.2023 - PDF - Englisch - ASTM
mehr dazu57,00 € -
54,00 €
-
65,00 €
-
BS EN ISO 4491-2:2023
Metallic powders. Determination of oxygen content by reduction methods Loss mass on hydrogen (hydrogen loss)
28.04.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
NBN EN ISO 4491-2:2023
Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 2: Perte de masse par réduction dans l'hydrogène (perte dans l'hydrogène) (ISO 4491-2:2023)
26.04.2023 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 4491-2:2023
Metallpulver - Bestimmung des Sauerstoffanteils durch Reduktionsverfahren - Teil 2: Masseverlust durch Reduktion mit Wasserstoff (ISO 4491-2:2023)
26.04.2023 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 4491-2:2023
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:2023)
26.04.2023 - PDF - Englisch - NBN
mehr dazu58,00 € -
BS EN ISO 4491-1:2023
Metallic powders. Determination of oxygen content by reduction methods General guidelines
18.04.2023 - PDF - Englisch - BSI
mehr dazu151,00 € -
NBN EN ISO 4491-1:2023
Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 1: Directives générales (ISO 4491-1:2023)
12.04.2023 - PDF - Französisch - NBN
mehr dazu37,00 € -
NBN EN ISO 4491-1:2023
Metallpulver - Bestimmung des Sauerstoffgehaltes durch Reduktionsverfahren - Teil 1: Allgemeine Hinweise (ISO 4491-1:2023)
12.04.2023 - PDF - Deutsche - NBN
mehr dazu37,00 € -
NBN EN ISO 4491-1:2023
Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023)
12.04.2023 - PDF - Englisch - NBN
mehr dazu37,00 € -
NF EN ISO 4491-2, A95-181-2 (04/2023)
Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 2 : perte de masse par réduction dans l'hydrogène (perte dans l'hydrogène)
01.04.2023 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
NF EN ISO 4491-1, A95-181-1 (04/2023)
Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 1 : directives générales
01.04.2023 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
432,00 €
-
331,00 €
-
NBN EN ISO 3252:2023
Métallurgie des poudres - Vocabulaire (ISO 3252:2023)
22.03.2023 - PDF - Französisch - NBN
mehr dazu37,00 € -
37,00 €
-
37,00 €
-
108,33 €
-
UNE 96002:2023
Sintered metal materials for bearings. Specifications.
15.02.2023 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
BS EN ISO 5755:2022 + Redline
Tracked Changes. Sintered metal material. Specifications
10.02.2023 - PDF - Englisch - BSI
mehr dazu492,00 € -
ASTM B931-23
Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
01.02.2023 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM B931-23 + Redline
Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
01.02.2023 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM B527-23
Standard Test Method for Tap Density of Metal Powders and Compounds
01.02.2023 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM B527-23 + Redline
Standard Test Method for Tap Density of Metal Powders and Compounds
01.02.2023 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM B964-23
Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
01.02.2023 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM B964-23 + Redline
Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
01.02.2023 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM B946-23
Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products
01.02.2023 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM B946-23 + Redline
Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products
01.02.2023 - PDF - Englisch - ASTM
mehr dazu57,00 € -
DIN EN ISO 5755:2023-02
Sintered metal material - Specifications (ISO 5755:2022), German version EN ISO 5755:2022
01.02.2023 - PDF - Deutsche - DIN
mehr dazu201,96 € -
377,00 €
-
NBN EN ISO 5755:2022
Matériaux métalliques frittés - Spécifications (ISO 5755:2022)
28.10.2022 - PDF - Französisch - NBN
mehr dazu184,00 € -
184,00 €
-
NBN EN ISO 5755:2022
Sintered metal material - Specifications (ISO 5755:2022)
28.10.2022 - PDF - Englisch - NBN
mehr dazu184,00 € -
144,67 €
-
ASTM B214-22
Standard Test Method for Sieve Analysis of Metal Powders
01.09.2022 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B214-22 + Redline
Standard Test Method for Sieve Analysis of Metal Powders
01.09.2022 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B311-22
Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
01.09.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B311-22 + Redline
Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
01.09.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B417-22
Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
01.09.2022 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B417-22 + Redline
Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
01.09.2022 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM E159-22
Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
01.09.2022 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM E159-22 + Redline
Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
01.09.2022 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B922-22
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
01.03.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B922-22 + Redline
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
01.03.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
21/30443655 DC:2021
BS EN ISO 2740. Sintered metal materials, excluding hardmetals. Tensile test pieces
10.11.2021 - PDF - Englisch - BSI
mehr dazu24,00 € -
ASTM B611-21
Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
01.11.2021 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B611-21 + Redline
Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
01.11.2021 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B703-21
Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
01.09.2021 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B703-21 + Redline
Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
01.09.2021 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B212-21
Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
01.09.2021 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B212-21 + Redline
Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
01.09.2021 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B848/B848M-21
Standard Specification for Powder Forged (PF) Ferrous Materials
01.09.2021 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B848/B848M-21 + Redline
Standard Specification for Powder Forged (PF) Ferrous Materials
01.09.2021 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B276-21
Standard Test Method for Apparent Porosity in Cemented Carbides
01.09.2021 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM B276-21 + Redline
Standard Test Method for Apparent Porosity in Cemented Carbides
01.09.2021 - PDF - Englisch - ASTM
mehr dazu72,00 € -
UNE-EN ISO 4499-1:2021
Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
07.07.2021 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 4499-1:2021
Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
07.07.2021 - PDF - Englisch - AENOR
mehr dazu75,60 € -
UNE-EN ISO 4499-2:2021
Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
07.07.2021 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN ISO 4499-2:2021
Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
07.07.2021 - PDF - Englisch - AENOR
mehr dazu84,00 € -
UNE-EN ISO 28080:2021
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
07.07.2021 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 28080:2021
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
07.07.2021 - PDF - Englisch - AENOR
mehr dazu81,60 € -
BS EN ISO 28080:2021 + Redline
Tracked Changes. Hardmetals. Abrasion tests for hardmetals
07.06.2021 - PDF - Englisch - BSI
mehr dazu235,00 € -
DIN EN ISO 28080:2021-06
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021), German version EN ISO 28080:2021
01.06.2021 - PDF - Deutsche - DIN
mehr dazu79,72 € -
ASTM B939-21
Standard Test Method for Radial Crushing Strength,K , of Powder Metallurgy (PM) Bearings and Structural Materials
01.04.2021 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B939-21 + Redline
Standard Test Method for Radial Crushing Strength,K , of Powder Metallurgy (PM) Bearings and Structural Materials
01.04.2021 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B859-21
Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
01.04.2021 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B859-21 + Redline
Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
01.04.2021 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B934-21
Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
01.04.2021 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B934-21 + Redline
Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
01.04.2021 - PDF - Englisch - ASTM
mehr dazu53,00 € -
NBN EN ISO 28080:2021
Hartmetalle - Abriebprüfungen für Hartmetalle (ISO 28080:2021)
24.03.2021 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN EN ISO 28080:2021
Hartmetalle - Abriebprüfungen für Hartmetalle (ISO 28080:2021)
24.03.2021 - PDF - Deutsche - NBN
mehr dazu89,00 € -
NBN EN ISO 28080:2021
Hartmetalle - Abriebprüfungen für Hartmetalle (ISO 28080:2021)
24.03.2021 - PDF - Englisch - NBN
mehr dazu89,00 € -
180,00 €
-
75,67 €
-
UNE-EN ISO 13517:2021
Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
03.02.2021 - PDF - Spanisch - AENOR
mehr dazu58,00 € -
UNE-EN ISO 13517:2021
Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
03.02.2021 - PDF - Englisch - AENOR
mehr dazu69,60 € -
UNE-EN ISO 4497:2021
Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)
20.01.2021 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 4497:2021
Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)
20.01.2021 - PDF - Englisch - AENOR
mehr dazu72,00 € -
DIN ISO 14168:2020-12
Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders (ISO 14168:2011)
01.12.2020 - PDF - Deutsche - DIN
mehr dazu52,90 € -
51,00 €
-
61,00 €
-
DIN EN ISO 4499-2:2020-11
Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020), German version EN ISO 4499-2:2020
01.11.2020 - PDF - Deutsche - DIN
mehr dazu85,79 € -
DIN EN ISO 4499-1:2020-11
Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020), German version EN ISO 4499-1:2020
01.11.2020 - PDF - Deutsche - DIN
mehr dazu65,89 € -
ASTM B331-20
Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
01.10.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B331-20 + Redline
Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
01.10.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B933-20
Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
01.10.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B933-20 + Redline
Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
01.10.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM E194-20
Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
01.10.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM E194-20 + Redline
Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
01.10.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B330-20
Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
01.10.2020 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B330-20 + Redline
Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
01.10.2020 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B935-20
Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
01.10.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B935-20 + Redline
Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
01.10.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
DIN EN ISO 4497:2020-10
Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020), German version EN ISO 4497:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu65,89 € -
NBN EN ISO 4499-2:2020
Hartmetalle - Metallographische Bestimmung der Mikrostruktur - Teil 2: Messung der WC-Korngröße (ISO 4499-2:2020)
27.08.2020 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN EN ISO 4499-2:2020
Hartmetalle - Metallographische Bestimmung der Mikrostruktur - Teil 2: Messung der WC-Korngröße (ISO 4499-2:2020)
27.08.2020 - PDF - Deutsche - NBN
mehr dazu89,00 € -
NBN EN ISO 4499-2:2020
Hartmetalle - Metallographische Bestimmung der Mikrostruktur - Teil 2: Messung der WC-Korngröße (ISO 4499-2:2020)
27.08.2020 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN EN ISO 4499-1:2020
Hartmetalle - Metallographische Bestimmung der Mikrostruktur - Teil 1: Gefügebilder und Beschreibung (ISO 4499-1:2020)
27.08.2020 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 4499-1:2020
Hartmetalle - Metallographische Bestimmung der Mikrostruktur - Teil 1: Gefügebilder und Beschreibung (ISO 4499-1:2020)
27.08.2020 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 4499-1:2020
Hartmetalle - Metallographische Bestimmung der Mikrostruktur - Teil 1: Gefügebilder und Beschreibung (ISO 4499-1:2020)
27.08.2020 - PDF - Englisch - NBN
mehr dazu58,00 € -
BS EN ISO 4499-1:2020
Hardmetals. Metallographic determination of microstructure Photomicrographs and description
13.08.2020 - PDF - Englisch - BSI
mehr dazu180,00 € -
BS EN ISO 4499-2:2020
Hardmetals. Metallographic determination of microstructure Measurement WC grain size
12.08.2020 - PDF - Englisch - BSI
mehr dazu250,00 € -
NF EN ISO 4499-1, A95-186-1 (08/2020)
Hardmetals - Metallographic determination of microstructure - Part 1 : photomicrographs and description
01.08.2020 - Paper - Französisch - AFNOR
mehr dazu60,50 € -
NF EN ISO 4499-2, A95-186-2 (08/2020)
Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size
01.08.2020 - Paper - Französisch - AFNOR
mehr dazu75,50 € -
DIN EN ISO 13517:2020-08
Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020), German version EN ISO 13517:2020
01.08.2020 - PDF - Deutsche - DIN
mehr dazu65,89 € -
NBN EN ISO 4497:2020
Metallpulver - Bestimmung der Teilchengröße durch Trockensiebung (ISO 4497:2020)
25.06.2020 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 4497:2020
Metallpulver - Bestimmung der Teilchengröße durch Trockensiebung (ISO 4497:2020)
25.06.2020 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 4497:2020
Metallpulver - Bestimmung der Teilchengröße durch Trockensiebung (ISO 4497:2020)
25.06.2020 - PDF - Englisch - NBN
mehr dazu58,00 € -
NBN EN ISO 13517:2020
Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters (Gustavsson-Flowmeter) (ISO 13517:2020)
25.06.2020 - PDF - Französisch - NBN
mehr dazu37,00 € -
NBN EN ISO 13517:2020
Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters (Gustavsson-Flowmeter) (ISO 13517:2020)
25.06.2020 - PDF - Deutsche - NBN
mehr dazu37,00 € -
NBN EN ISO 13517:2020
Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters (Gustavsson-Flowmeter) (ISO 13517:2020)
25.06.2020 - PDF - Englisch - NBN
mehr dazu37,00 € -
ASTM A904-20
Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
01.06.2020 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM A904-20 + Redline
Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
01.06.2020 - PDF - Englisch - ASTM
mehr dazu57,00 € -
BS EN ISO 4497:2020
Metallic powders. Determination of particle size by dry sieving
19.05.2020 - PDF - Englisch - BSI
mehr dazu151,00 € -
BS EN ISO 13517:2020
Metallic powders. Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
19.05.2020 - PDF - Englisch - BSI
mehr dazu151,00 € -
NF EN ISO 13517, A95-114 (05/2020)
Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
01.05.2020 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
NF EN ISO 4497, A95-188 (05/2020)
Metallic powders - Determination of particle size by dry sieving
01.05.2020 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
ASTM B329-20
Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
01.05.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B329-20 + Redline
Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
01.05.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ISO 4497:2020
Metallic powders
Determination of particle size by dry sieving
30.04.2020 - Paper - Englisch - ISO
mehr dazu72,00 € -
53,00 €
-
63,60 €
-
UNE-EN ISO 4884:2020
Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:2019)
15.04.2020 - PDF - Spanisch - AENOR
mehr dazu53,00 € -
UNE-EN ISO 4884:2020
Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:2019)
15.04.2020 - PDF - Englisch - AENOR
mehr dazu63,60 € -
UNE-EN ISO 10070:2020
Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
15.04.2020 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
UNE-EN ISO 10070:2020
Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
15.04.2020 - PDF - Englisch - AENOR
mehr dazu85,20 € -
ASTM B213-20
Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
01.04.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B213-20 + Redline
Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
01.04.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM B312-20
Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
01.04.2020 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B312-20 + Redline
Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
01.04.2020 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B823-20
Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
01.04.2020 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM B823-20 + Redline
Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
01.04.2020 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM B795-20
Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
01.04.2020 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM B795-20 + Redline
Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
01.04.2020 - PDF - Englisch - ASTM
mehr dazu53,00 € -
DIN EN ISO 10070:2020-04
Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019), German version EN ISO 10070:2019
01.04.2020 - PDF - Deutsche - DIN
mehr dazu85,79 € -
UNE-EN ISO 4491-4:2020
Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2019)
01.04.2020 - PDF - Spanisch - AENOR
mehr dazu58,00 € -
UNE-EN ISO 4491-4:2020
Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2019)
01.04.2020 - PDF - Englisch - AENOR
mehr dazu69,60 € -
BS EN ISO 4492:2017 + Redline
Tracked Changes. Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
27.02.2020 - PDF - Englisch - BSI
mehr dazu235,00 €