77.140.75 : Stahlrohre für den speziellen Einsatz 77.140 : Eisen- und Stahlerzeugnisse 77 : Metallurgie ICS -Navigation

BS EN 10216-2:2024

Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy with specified elevated temperature properties
03.06.2025 - PDF - Englisch - BSI
mehr dazu

370,00 €

NF EN 15698-2, E39-017-2 (03/2025)

Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pour les réseaux d'eau chaude enterrés directement - Partie 2 : assemblages de raccords et d'appareils de robinetterie manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
01.03.2025 - Papier - Französisch - AFNOR
mehr dazu

70,50 €

PR NF EN 10253-1, A49-170-1PR (03/2025)

Raccords à souder bout à bout - Partie 1: Acier au carbone pour usages généraux et sans contrôle spécifique
01.03.2025 - Papier - Englisch, Französisch - AFNOR
mehr dazu

111,00 €

DIN EN 10216-2:2025-02

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10216-2:2024
01.02.2025 - PDF - Deutsche - DIN
mehr dazu

135,89 €

BS EN 10216-2:2024 + Redline

Tracked Changes. Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy with specified elevated temperature properties
21.11.2024 - PDF - Englisch - BSI
mehr dazu

520,00 €

BS EN 10216-2:2024

Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy with specified elevated temperature properties
18.11.2024 - PDF - Englisch - BSI
mehr dazu

370,00 €

NBN EN 10216-2:2024

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
13.11.2024 - - - NBN
mehr dazu

184,00 €

NBN EN 10216-2:2024

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
13.11.2024 - - - NBN
mehr dazu

184,00 €

NF EN 10216-2, A49-200-2 (11/2024)

Tubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 2 : tubes en acier non allié et allié avec caractéristiques spécifiées à température élevée
01.11.2024 - Papier - Französisch - AFNOR
mehr dazu

122,50 €

UNE-EN 10305-3:2024

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
02.10.2024 - - - AENOR
mehr dazu

106,80 €

PR NF EN 10253-2/A1, A49-170-2/A1PR (07/2024)

Raccords à souder bout à bout - Partie 2 : aciers non alliés et aciers ferritiques alliés avec contrôle spécifique
01.07.2024 - Papier - Englisch, Französisch - AFNOR
mehr dazu

76,50 €

ASTM E309-24

Standard Practice for Eddy Current Examination of Steel Tubular Products
01.07.2024 - PDF - Englisch - ASTM
mehr dazu

69,00 €

ASTM E309-24 + Redline

Standard Practice for Eddy Current Examination of Steel Tubular Products
01.07.2024 - PDF - Englisch - ASTM
mehr dazu

83,00 €

NBN ISO 16132:2024

Rohre und Formstücke aus duktilem Gusseisen – Dichtungsanstriche für Zementmörtelauskleidungen
17.06.2024 - PDF - Englisch - NBN
mehr dazu

92,00 €

ISO 13680:2024

Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
17.05.2024 - - - ISO
mehr dazu

254,00 €

24/30485955 DC:2024

BS EN 10378 Welded stainless steel square and rectangular tubes for mechanical, engineering and decorative use - Technical delivery conditions
11.04.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

BS ISO 16132:2024 + Redline

Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
22.03.2024 - PDF - Englisch - BSI
mehr dazu

326,00 €

BS ISO 16132:2024

Ductile iron pipes and fittings. Seal coats for cement mortar linings
12.03.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

ISO 16132:2024

Ductile iron pipes and fittings — Seal coats for cement mortar linings
08.03.2024 - Papier - Englisch - ISO
mehr dazu

113,00 €

BS ISO 4179:2024 + Redline

Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
13.02.2024 - PDF - Englisch - BSI
mehr dazu

438,00 €

BS ISO 4179:2024

Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
07.02.2024 - PDF - Englisch - BSI
mehr dazu

191,00 €

ISO 4179:2024

Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
05.02.2024 - Papier - Englisch - ISO
mehr dazu

75,00 €

DIN EN 10305-3:2024-02

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes, German version EN 10305-3:2023
01.02.2024 - PDF - Deutsche - DIN
mehr dazu

108,13 €

UNE-ISO 23991:2023

Irrigation applications of ductile iron pipelines — Product design and installation.
27.12.2023 - PDF - Spanisch - AENOR
mehr dazu

88,00 €

BS EN 10305-3:2023

Steel tubes for precision applications. Technical delivery conditions Welded cold sized
08.12.2023 - PDF - Englisch - BSI
mehr dazu

312,00 €

NBN EN 10305-3:2023

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre
06.12.2023 - PDF - Französisch - NBN
mehr dazu

163,00 €

NBN EN 10305-3:2023

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre
06.12.2023 - PDF - Deutsche - NBN
mehr dazu

163,00 €

NBN EN 10305-3:2023

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre
06.12.2023 - PDF - Englisch - NBN
mehr dazu

163,00 €

NF EN 10305-3, A49-300-3 (12/2023)

Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : tubes soudés calibrés à froid
01.12.2023 - Papier - Französisch - AFNOR
mehr dazu

102,00 €

NF EN 253/IN1, E39-011/IN1 (12/2023)

Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
01.12.2023 - Papier - Französisch - AFNOR
mehr dazu

44,50 €

NF EN 253+A1, E39-011 (12/2023)

Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
01.12.2023 - Papier - Französisch - AFNOR
mehr dazu

111,33 €

UNE-EN 17800:2023

Life cycle cost (LCC) and Life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
15.11.2023 - - - AENOR
mehr dazu

Von: 81,00 €

ASTM A1127/A1127M-23

Standard Specification for Stainless Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP) or Built-Up Rounded Corner Square, Rectangular, and Special Shape Structural Tube
01.11.2023 - PDF - Englisch - ASTM
mehr dazu

69,00 €

23/30461309 DC:2023

BS ISO 16132. Ductile iron pipes and fittings. Seal coats for cement mortar linings
07.06.2023 - PDF - Englisch - BSI
mehr dazu

24,00 €

23/30468148 DC:2023

BS EN ISO 13680 AMD 1. Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material. Technical delivery conditions
16.05.2023 - PDF - Englisch - BSI
mehr dazu

24,00 €

23/30468096 DC:2023

BS EN 10216-2. Seamless steel tubes for pressure purposes. Technical delivery conditions Part 2. Non-alloy and alloy with specified elevated temperature properties
11.04.2023 - PDF - Englisch - BSI
mehr dazu

24,00 €

PR NF EN 10217-1/A1, A49-201-1/A1PR (03/2023)

Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1 : tubes en acier non allié, soudés électriquement et soudés à l'arc immergé, avec caractéristiques spécifiées à température ambiante
01.03.2023 - Papier - Englisch, Französisch - AFNOR
mehr dazu

46,50 €

DIN EN 17800:2023-03

Life cycle cost (LCC) and life cycle assessment (LCA) for CO<(Index)2> emissions in ductile iron pipe systems, German version EN 17800:2022.
01.03.2023 - PDF - Deutsche - DIN
mehr dazu

102,34 €

23/30430401 DC:2023

BS ISO 4179. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
21.02.2023 - PDF - Englisch - BSI
mehr dazu

24,00 €

NBN ISO 23991:2023

Bewässerungsanwendungen von Rohrleitungen aus duktilem Gusseisen – Produktdesign und Installation
01.02.2023 - PDF - Französisch - NBN
mehr dazu

142,00 €

DIN EN 10217-1/A1:2023-02

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German and English version EN 10217-1:2019/prA1:2023
01.02.2023 - PDF - Englisch, Deutsch - DIN
mehr dazu

40,56 €

NBN ISO 23991:2023

Bewässerungsanwendungen von Rohrleitungen aus duktilem Gusseisen – Produktdesign und Installation
01.02.2023 - PDF - Englisch - NBN
mehr dazu

142,00 €

23/30465607 DC:2023

BS EN 10217-1 AMD1. Welded steel tubes for pressure purposes. Technical delivery conditions Part 1. Electric welded and submerged arc non-alloy with specified room temperature properties
19.01.2023 - PDF - Englisch - BSI
mehr dazu

24,00 €

BS EN 17800:2022

Life cycle cost (LCC) and life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
10.01.2023 - PDF - Englisch - BSI
mehr dazu

312,00 €

NBN EN 17800:2022

Lebenszykluskosten (LCC) und Lebenszyklusanalyse (LCA) der CO2-Emissionen von Rohrsystemen aus duktilem Gusseisen
22.12.2022 - PDF - Französisch - NBN
mehr dazu

121,00 €

NBN EN 17800:2022

Lebenszykluskosten (LCC) und Lebenszyklusanalyse (LCA) der CO2-Emissionen von Rohrsystemen aus duktilem Gusseisen
22.12.2022 - PDF - Deutsche - NBN
mehr dazu

121,00 €

NBN EN 17800:2022

Lebenszykluskosten (LCC) und Lebenszyklusanalyse (LCA) der CO2-Emissionen von Rohrsystemen aus duktilem Gusseisen
22.12.2022 - PDF - Englisch - NBN
mehr dazu

121,00 €

ASTM A1123/A1123M-22

Standard Specification for Carbon Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP), Built-Up, Square, Rectangular, and Special Shape Tube
01.11.2022 - PDF - Englisch - ASTM
mehr dazu

69,00 €

ASTM A1085/A1085M-22

Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
01.11.2022 - PDF - Englisch - ASTM
mehr dazu

69,00 €

ASTM A1085/A1085M-22 + Redline

Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
01.11.2022 - PDF - Englisch - ASTM
mehr dazu

83,00 €

ASTM A595/A595M-22

Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
01.09.2022 - PDF - Englisch - ASTM
mehr dazu

69,00 €

ASTM A595/A595M-22 + Redline

Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
01.09.2022 - PDF - Englisch - ASTM
mehr dazu

83,00 €

ASTM A1097/A1097M-22

Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger)
01.09.2022 - PDF - Englisch - ASTM
mehr dazu

61,00 €

ASTM A1097/A1097M-22 + Redline

Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger)
01.09.2022 - PDF - Englisch - ASTM
mehr dazu

73,00 €

NF EN 10357, A49-249 (08/2022)

Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
01.08.2022 - Papier - Französisch - AFNOR
mehr dazu

62,33 €

BS ISO 23991:2022

Irrigation applications of ductile iron pipelines. Product design and installation
16.05.2022 - PDF - Englisch - BSI
mehr dazu

312,00 €

NF ISO 23991, A48-991 (05/2022)

Irrigation applications of ductile iron pipelines - Product design and installation
01.05.2022 - Papier - Französisch - AFNOR
mehr dazu

102,33 €

22/30450373 DC:2022

BS EN 10305-3. Steel tubes for precision applications. Technical delivery conditions Part 3. Welded cold sized
11.04.2022 - PDF - Englisch - BSI
mehr dazu

24,00 €

ISO 23991:2022

Irrigation applications of ductile iron pipelines — Product design and installation
07.04.2022 - - - ISO
mehr dazu

178,00 €

BS EN 10217-7:2021 + Redline

Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions Stainless
27.01.2022 - PDF - Englisch - BSI
mehr dazu

432,00 €

UNE-EN 10216-5:2021

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
29.12.2021 - - - AENOR
mehr dazu

Von: 102,00 €

UNE-EN 10217-7:2021

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
29.12.2021 - - - AENOR
mehr dazu

Von: 93,00 €

BS EN 10216-5:2021 + Redline

Tracked Changes. Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless
06.12.2021 - PDF - Englisch - BSI
mehr dazu

520,00 €

ASTM A1110/A1110M-21

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
01.09.2021 - PDF - Englisch - ASTM
mehr dazu

69,00 €

ASTM A1110/A1110M-21 + Redline

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
01.09.2021 - PDF - Englisch - ASTM
mehr dazu

83,00 €

NF EN 10253-2, A49-170-2 (08/2021)

Raccords à souder bout à bout - Partie 2 : aciers non alliés et aciers ferritiques alliés avec contrôle spécifique
01.08.2021 - Papier - Französisch - AFNOR
mehr dazu

197,67 €

DIN EN ISO 11960:2021-08

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020), English version EN ISO 11960:2021, only on CD-ROM.
01.08.2021 - PDF - Englisch, Deutsch - DIN
mehr dazu

374,67 €

NBN ISO 9349:2021

Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products
02.06.2021 - - - NBN
mehr dazu

58,00 €

DIN EN 10216-5:2021-06

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes, German version EN 10216-5:2021
01.06.2021 - PDF - Deutsche - DIN
mehr dazu

118,79 €

DIN EN 10217-7:2021-06

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes, German version EN 10217-7:2021
01.06.2021 - PDF - Deutsche - DIN
mehr dazu

113,27 €

UNE-EN ISO 11960:2021

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020) (Endorsed by Asociación Española de Normalización in June of 2021.)
01.06.2021 - PDF - Englisch - AENOR
mehr dazu

215,00 €

UNE-EN ISO 10893-9:2011/A1:2021

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
19.05.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN ISO 10893-11:2011/A1:2021

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
19.05.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN ISO 10893-10:2011/A1:2021

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
19.05.2021 - - - AENOR
mehr dazu

Von: 35,00 €

BS EN 10217-7:2021

Welded steel tubes for pressure purposes. Technical delivery conditions Stainless
14.05.2021 - PDF - Englisch - BSI
mehr dazu

331,00 €

BS EN 10217-2:2019

Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy and alloy with specified elevated temperature properties
14.05.2021 - PDF - Englisch - BSI
mehr dazu

312,00 €

BS EN 10217-3:2019

Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded and submerged arc alloy fine grain with specified room, elevated low temperature properties
14.05.2021 - PDF - Englisch - BSI
mehr dazu

370,00 €

BS EN 10217-4:2019

Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy with specified low temperature properties
14.05.2021 - PDF - Englisch - BSI
mehr dazu

312,00 €

BS EN 10217-5:2019

Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy with specified elevated temperature properties
14.05.2021 - PDF - Englisch - BSI
mehr dazu

351,00 €

BS EN 10217-6:2019

Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy with specified low temperature properties
14.05.2021 - PDF - Englisch - BSI
mehr dazu

312,00 €

BS EN 10217-1:2019

Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded and submerged arc non-alloy with specified room temperature properties
13.05.2021 - PDF - Englisch - BSI
mehr dazu

351,00 €

BS EN 10216-5:2021

Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless
05.05.2021 - PDF - Englisch - BSI
mehr dazu

370,00 €

BS EN ISO 11960:2021

Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
30.04.2021 - PDF - Englisch - BSI
mehr dazu

449,00 €

NBN EN ISO 11960:2021

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
23.04.2021 - - - NBN
mehr dazu

205,00 €

NBN EN 10217-7:2021

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
23.04.2021 - - - NBN
mehr dazu

163,00 €

NBN EN 10216-5:2021

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
23.04.2021 - - - NBN
mehr dazu

163,00 €

NF EN 10216-5, A49-200-5 (04/2021)

Nahltlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 5: Rohre aus nichtrostenden Stählen
01.04.2021 - Papier - Französisch - AFNOR
mehr dazu

122,67 €

NF EN 10217-7, A49-201-7 (04/2021)

Geschweisste Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 7 : Rohre aus nichtrostenden Stählen
01.04.2021 - Papier - Französisch - AFNOR
mehr dazu

111,33 €

NF EN ISO 11960, M87-207 (04/2021)

Industries du pétrole et du gaz naturel - Tubes d'acier utilisés comme tubes de cuvelage ou tubes de production dans les puits
01.04.2021 - Papier - Französisch - AFNOR
mehr dazu

268,00 €

UNE-EN ISO 10893-1:2011/A1:2021

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
31.03.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN ISO 10893-2:2011/A1:2021

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
31.03.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN ISO 10893-3:2011/A2:2021

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
31.03.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN ISO 10893-8:2011/A1:2021

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
31.03.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN ISO 10893-12:2011/A1:2021

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
31.03.2021 - - - AENOR
mehr dazu

Von: 35,00 €

UNE-EN 10210-3:2021

Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
17.03.2021 - - - AENOR
mehr dazu

Von: 94,00 €

UNE-EN 10219-3:2021

Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
17.03.2021 - - - AENOR
mehr dazu

Von: 97,00 €

UNE-EN 10216-2:2014+A1:2021

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
17.02.2021 - - - AENOR
mehr dazu

Von: 104,00 €

UNE-EN ISO 10893-3:2011/A1:2021

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
17.02.2021 - - - AENOR
mehr dazu

Von: 35,00 €

DIN EN ISO 11961:2020-12

Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018 + Amd 1:2020), English version EN ISO 11961:2018 + A1:2020, only on CD-ROM.
01.12.2020 - PDF - Englisch, Deutsch - DIN
mehr dazu

222,71 €

DIN EN ISO 13680:2020-11

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020), English version EN ISO 13680:2020, only on CD-ROM.
01.11.2020 - PDF - Englisch, Deutsch - DIN
mehr dazu

222,71 €

DIN EN 10219-3:2020-11

Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels, German version EN 10219-3:2020
01.11.2020 - PDF - Deutsche - DIN
mehr dazu

113,27 €

DIN EN 10210-3:2020-11

Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels, German version EN 10210-3:2020
01.11.2020 - PDF - Deutsche - DIN
mehr dazu

113,27 €

NBN EN 10210-3:2020

Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
22.10.2020 - - - NBN
mehr dazu

163,00 €

NBN EN 10219-3:2020

Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
22.10.2020 - - - NBN
mehr dazu

163,00 €

BS EN 10219-3:2020

Cold formed welded steel structural hollow sections Technical delivery conditions for high strength and weather resistant steels
08.10.2020 - PDF - Englisch - BSI
mehr dazu

331,00 €

DIN EN ISO 10893-2:2020-10

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd 1:2020), German version EN ISO 10893-2:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

82,15 €

DIN EN ISO 10893-8:2020-10

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd 1:2020), German version EN ISO 10893-8:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

74,95 €

DIN EN ISO 10893-1:2020-10

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011 + Amd 1:2020), German version EN ISO 10893-1:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

82,15 €

DIN EN ISO 10893-12:2020-10

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011 + Amd 1:2020), German version EN ISO 10893-12:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

61,40 €

DIN EN ISO 10893-10:2020-10

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd 1:2020), German version EN ISO 10893-10:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

82,15 €

DIN EN ISO 10893-11:2020-10

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020), German version EN ISO 10893-11:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

74,95 €

DIN EN ISO 10893-9:2020-10

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd 1:2020), German version EN ISO 10893-9:2011 + A1:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

74,95 €

DIN EN ISO 10893-3:2020-10

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011 + Amd 1:2019 + Amd 2:2020), German version EN ISO 10893-3:2011 + A1:2019 + A2:2020
01.10.2020 - PDF - Deutsche - DIN
mehr dazu

82,15 €

BS EN 10210-3:2020

Hot finished steel structural hollow sections Technical delivery conditions for high strength and weather resistant steels
24.09.2020 - PDF - Englisch - BSI
mehr dazu

331,00 €

UNE-EN ISO 3183:2020

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019)
23.09.2020 - - - AENOR
mehr dazu

Von: 82,00 €

NF EN 10219-3, A49-540-3 (09/2020)

Cold formed welded steel structural hollow sections - Part 3 : technical delivery conditions for high strength and weather resistant steels - Profils creux de construction en acier, soudés et formés à froid - Partie 3 : conditions techniques de livraison pour des applications de construction mécanique
01.09.2020 - Papier - Französisch - AFNOR
mehr dazu

111,33 €

NF EN 10210-3, A49-502-3 (09/2020)

Hot finished steel structural hollow sections - Part 3 : technical delivery conditions for high strength and weather resistant steels - Profils creux de construction finis à chaud en aciers - Partie 3 : conditions techniques de livraison pour des applications de construction mécanique
01.09.2020 - Papier - Französisch - AFNOR
mehr dazu

111,33 €

NBN EN ISO 11961:2018/A1:2020

Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
27.08.2020 - PDF - Englisch - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-9:2011/A1:2020

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
27.08.2020 - - - NBN
mehr dazu

20,00 €

UNE-EN ISO 11961:2018/A1:2020

Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
01.08.2020 - PDF - Englisch - AENOR
mehr dazu

46,00 €

NBN EN ISO 10893-12:2011/A1:2020

Zerstörungsfreie Prüfung von Stahlrohren - Teil 12: Automatisierte Ultraschall-Wanddickenprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre über den gesamten Rohrumfang - Änderung 1: Änderung der Zulässigkeitskriterien (ISO 10893-12:2011/Amd 1:2020)
29.07.2020 - PDF - Deutsche - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-12:2011/A1:2020

Zerstörungsfreie Prüfung von Stahlrohren - Teil 12: Automatisierte Ultraschall-Wanddickenprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre über den gesamten Rohrumfang - Änderung 1: Änderung der Zulässigkeitskriterien (ISO 10893-12:2011/Amd 1:2020)
29.07.2020 - PDF - Englisch - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-10:2011/A1:2020

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
29.07.2020 - - - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-1:2011/A1:2020

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
29.07.2020 - - - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-11:2011/A1:2020

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
29.07.2020 - - - NBN
mehr dazu

20,00 €

BS EN ISO 11961:2018+A1:2020

Petroleum and natural gas industries. Steel drill pipe
27.07.2020 - PDF - Englisch - BSI
mehr dazu

430,00 €

BS EN ISO 10893-9:2011+A1:2020

Non-destructive testing of steel tubes Automated ultrasonic for the detection laminar imperfections in strip/plate used manufacture welded
27.07.2020 - PDF - Englisch - BSI
mehr dazu

191,00 €

BS EN ISO 10893-11:2011+A1:2020

Non-destructive testing of steel tubes Automated ultrasonic the weld seam welded for detection longitudinal and/or transverse imperfections
17.07.2020 - PDF - Englisch - BSI
mehr dazu

191,00 €

BS EN ISO 10893-10:2011+A1:2020

Non-destructive testing of steel tubes Automated full peripheral ultrasonic seamless and welded (except submerged arc-welded) for the detection longitudinal and/or transverse imperfections
15.07.2020 - PDF - Englisch - BSI
mehr dazu

191,00 €

BS EN ISO 10893-12:2011+A1:2020

Non-destructive testing of steel tubes Automated full peripheral ultrasonic thickness seamless and welded (except submerged arc-welded)
09.07.2020 - PDF - Englisch - BSI
mehr dazu

162,00 €

NF EN ISO 10893-11/A1, A49-785-11/A1 (07/2020)

Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency, change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 11 : Contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales - Amendement 1 : Modification de la fréquence ultrasonore d'essai des transducteurs -
01.07.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

NF EN ISO 10893-10/A1, A49-785-10/A1 (07/2020)

Non-destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency - change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 10 : Contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - AMENDEMENT 1 :
01.07.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

NF EN ISO 10893-9/A1, A49-785-9/A1 (07/2020)

Non-destructive testing of steel tubes - Part 9 : Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 9 : Contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles utilisées pour la fabrication des tubes en acier soudés - Amendement 1 : Changement des critères d'acceptation
01.07.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

UNE-EN ISO 13680:2020

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
01.07.2020 - PDF - Englisch - AENOR
mehr dazu

162,00 €

BS ISO 10763:2020

Hydraulic fluid power. Plain-end, seamless and welded precision steel tubes. Dimensions and nominal working pressures
29.06.2020 - PDF - Englisch - BSI
mehr dazu

162,00 €

ISO 10763:2020

Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
26.06.2020 - Papier - Englisch - ISO
mehr dazu

49,00 €

NBN EN ISO 13680:2020

Erdöl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbeständigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre und Zusatzmaterial - Technische Lieferbedingungen (ISO 13680:2020)
25.06.2020 - PDF - Englisch - NBN
mehr dazu

58,00 €

NBN EN ISO 10893-2:2011/A1:2020

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
25.06.2020 - - - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-8:2011/A1:2020

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
25.06.2020 - - - NBN
mehr dazu

20,00 €

NBN EN ISO 10893-3:2011/A2:2020

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
25.06.2020 - - - NBN
mehr dazu

20,00 €

BS EN ISO 10893-1:2011+A1:2020

Non-destructive testing of steel tubes Automated electromagnetic seamless and welded (except submerged arc-welded) for the verification hydraulic leaktightness
16.06.2020 - PDF - Englisch - BSI
mehr dazu

180,00 €

BS EN ISO 10893-2:2011+A1:2020

Non-destructive testing of steel tubes Automated eddy current seamless and welded (except submerged arc-welded) for the detection imperfections
12.06.2020 - PDF - Englisch - BSI
mehr dazu

191,00 €

BS EN ISO 10893-3:2011+A2:2020

Non-destructive testing of steel tubes Automated full peripheral flux leakage seamless and welded (except submerged arc-welded) ferromagnetic for the detection longitudinal and/or transverse imperfections
12.06.2020 - PDF - Englisch - BSI
mehr dazu

180,00 €

BS EN ISO 10893-8:2011+A1:2020

Non-destructive testing of steel tubes Automated ultrasonic seamless and welded for the detection laminar imperfections
12.06.2020 - PDF - Englisch - BSI
mehr dazu

191,00 €

ISO 10893-11:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
10.06.2020 - - - ISO
mehr dazu

21,00 €

ISO 10893-10:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
10.06.2020 - - - ISO
mehr dazu

21,00 €

BS EN ISO 13680:2020

Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material. Technical delivery conditions
09.06.2020 - PDF - Englisch - BSI
mehr dazu

399,00 €

NF EN ISO 10893-12/A1, A49-785-12/A1 (06/2020)

Non-destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1 : change of acceptance criteria
01.06.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

NF EN ISO 10893-1/A1, A49-785-1/A1 (06/2020)

Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1 : change of dimensions of the reference notch , change acceptance criteria - Essais non destructifs des tubes en acier - Partie 1 : Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
01.06.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

NF EN ISO 10893-2/A1, A49-785-2/A1 (06/2020)

Non-destructive testing of steel tubes - Part 2 : automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1 : change of dimensions of the reference notch, change acceptance criteria - Essais non destructifs des tubes en acier - Partie 2 : Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
01.06.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

NF EN ISO 10893-3/A2, A49-785-3/A2 (06/2020)

Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections - Amendment 2 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
01.06.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

NF EN ISO 10893-8/A1, A49-785-8/A1 (06/2020)

Non-destructive testing of steel tubes - Part 8 : automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1 : change acceptance criteria
01.06.2020 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

ISO 10893-12:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
27.05.2020 - - - ISO
mehr dazu

21,00 €

ISO 10893-9:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
27.05.2020 - - - ISO
mehr dazu

21,00 €

ISO 10893-1:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
27.05.2020 - - - ISO
mehr dazu

21,00 €

ISO 10893-8:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
18.05.2020 - - - ISO
mehr dazu

21,00 €

ISO 10893-3:2011/Amd 2:2020

Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
18.05.2020 - - - ISO
mehr dazu

21,00 €

ISO 10893-2:2011/Amd 1:2020

Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
18.05.2020 - - - ISO
mehr dazu

21,00 €

ISO 11960:2020

Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
31.03.2020 - - - ISO
mehr dazu

254,00 €

ISO 11961:2018/Amd 1:2020

Petroleum and natural gas industries — Steel drill pipe
09.03.2020 - Papier - Englisch - ISO
mehr dazu

21,00 €

BS EN 12007-3:2015 + Redline

Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements steel
27.02.2020 - PDF - Englisch - BSI
mehr dazu

326,00 €

BS ISO 9349:2017 + Redline

Tracked Changes. Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
27.02.2020 - PDF - Englisch - BSI
mehr dazu

269,00 €

BS EN 10305-6:2016 + Redline

Tracked Changes. Steel tubes for precision applications. Technical delivery conditions Welded cold drawn hydraulic and pneumatic power systems
26.02.2020 - PDF - Englisch - BSI
mehr dazu

326,00 €

BS EN 10305-2:2016 + Redline

Tracked Changes. Steel tubes for precision applications. Technical delivery conditions Welded cold drawn
25.02.2020 - PDF - Englisch - BSI
mehr dazu

373,00 €

BS 7668:2016 + Redline

Tracked Changes. Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
25.02.2020 - PDF - Englisch - BSI
mehr dazu

373,00 €

BS EN ISO 10893-7:2019 + Redline

Tracked Changes. Non-destructive testing of steel tubes Digital radiographic the weld seam welded for detection imperfections
24.02.2020 - PDF - Englisch - BSI
mehr dazu

373,00 €

BS EN ISO 10893-6:2019 + Redline

Tracked Changes. Non-destructive testing of steel tubes Radiographic the weld seam welded for detection imperfections
24.02.2020 - PDF - Englisch - BSI
mehr dazu

269,00 €

BS EN 10305-1:2016 + Redline

Tracked Changes. Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn
24.02.2020 - PDF - Englisch - BSI
mehr dazu

373,00 €

BS EN 10305-4:2016 + Redline

Tracked Changes. Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn hydraulic and pneumatic power systems
24.02.2020 - PDF - Englisch - BSI
mehr dazu

326,00 €

DIN EN ISO 3183:2020-02

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019), German version EN ISO 3183:2019
01.02.2020 - PDF - Deutsche - DIN
mehr dazu

102,34 €

UNE-EN 10210-2:2020

Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
29.01.2020 - - - AENOR
mehr dazu

Von: 98,00 €

UNE-EN 10225-4:2020

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
15.01.2020 - - - AENOR
mehr dazu

Von: 125,00 €

UNE-EN 10217-1:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
04.12.2019 - - - AENOR
mehr dazu

Von: 102,00 €

UNE-EN 10217-4:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
04.12.2019 - - - AENOR
mehr dazu

Von: 86,00 €

UNE-EN 10217-5:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
04.12.2019 - - - AENOR
mehr dazu

Von: 96,00 €

UNE-EN 10217-3:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
04.12.2019 - - - AENOR
mehr dazu

Von: 110,00 €

UNE-EN 10217-2:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
04.12.2019 - - - AENOR
mehr dazu

Von: 89,00 €

UNE-EN 10217-6:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
04.12.2019 - - - AENOR
mehr dazu

Von: 93,00 €

NBN EN ISO 3183:2019

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019)
28.11.2019 - - - NBN
mehr dazu

121,00 €

NBN EN ISO 10893-3:2011/A1:2019

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
28.11.2019 - - - NBN
mehr dazu

20,00 €

UNE-EN 10219-2:2019

Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
20.11.2019 - - - AENOR
mehr dazu

Von: 97,00 €

UNE-EN ISO 10893-7:2019

Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
20.11.2019 - - - AENOR
mehr dazu

Von: 76,00 €

UNE-EN ISO 10893-6:2019

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
20.11.2019 - - - AENOR
mehr dazu

Von: 69,00 €

BS EN ISO 3183:2019

Petroleum and natural gas industries. Steel pipe for pipeline transportation systems
06.11.2019 - PDF - Englisch - BSI
mehr dazu

250,00 €

DIN EN 10225-4:2019-11

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections, German version EN 10225-4:2019
01.11.2019 - PDF - Deutsche - DIN
mehr dazu

152,52 €

ISO 3183:2019

Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
07.10.2019 - - - ISO
mehr dazu

152,00 €

NF EN 253, E39-011 (10/2019)

Fernwärmerohre - Werkmässig gedämmte Verbundmantelrohrsysteme für direkt erdverlegte Fernwärmenetze - Verbund-Rohrsystem bestehend aus Stahl-Mediumrohr, Polyurethan-Wärmedämmung und Aussenmantel aus Polyethylen
01.10.2019 - Papier - Französisch - AFNOR
mehr dazu

111,33 €

NF EN ISO 3183, A49-404 (10/2019)

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
01.10.2019 - Papier - Französisch - AFNOR
mehr dazu

89,33 €

NF EN ISO 10893-3/A1, A49-785-3/A1 (10/2019)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von Unvollkommenheiten in Längs- un
01.10.2019 - Papier - Französisch - AFNOR
mehr dazu

26,67 €

ISO 10893-3:2011/Amd 1:2019

Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
14.09.2019 - - - ISO
mehr dazu

21,00 €

19/30398291 DC:2019

BS EN ISO 10893-10 AMD1. Non-destructive testing of steel tubes Part 10. Automated full peripheral ultrasonic seamless and welded (except submerged arc-welded) for the detection longitudinal and/or transverse imperfections
02.09.2019 - PDF - Englisch - BSI
mehr dazu

24,00 €

NF ISO 21053, A48-887 (09/2019)

Life cycle analysis and recycling of ductile iron pipes for water applications
01.09.2019 - Papier - Französisch - AFNOR
mehr dazu

75,50 €

DIN EN 10217-1:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German version EN 10217-1:2019
01.08.2019 - PDF - Deutsche - DIN
mehr dazu

124,49 €

DIN EN 10217-2:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-2:2019
01.08.2019 - PDF - Deutsche - DIN
mehr dazu

108,13 €

DIN EN 10217-3:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties, German version EN 10217-3:2019
01.08.2019 - PDF - Deutsche - DIN
mehr dazu

130,09 €

DIN EN 10217-4:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-4:2019
01.08.2019 - PDF - Deutsche - DIN
mehr dazu

102,34 €

DIN EN 10217-5:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-5:2019
01.08.2019 - PDF - Deutsche - DIN
mehr dazu

118,79 €