43.060.30 : Kühlsysteme. Schmiersysteme
-
NF R15-601 (12/2023)
Véhicules routiers - Liquides de refroidissement - Spécifications générales et exigences
01.12.2023 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
93,00 €
-
ASTM D5662-23
Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
01.11.2023 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM D5662-23 + Redline
Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
01.11.2023 - PDF - Englisch - ASTM
mehr dazu71,00 € -
SAE J 1436:2023-06-12
Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests
12.06.2023 - PDF - Englisch - SAE
mehr dazu89,00 € -
103,00 €
-
89,00 €
-
SAE J 1342:2022-08-26
Test Method for Determining Power Consumption of Cooling Fan Drive Systems
26.08.2022 - PDF - Englisch - SAE
mehr dazu66,00 € -
103,00 €
-
98,00 €
-
116,00 €
-
SAE J 1597:2021-08-26
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
26.08.2021 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 1598:2021-08-10
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading
10.08.2021 - PDF - Englisch - SAE
mehr dazu60,00 € -
66,00 €
-
SAE J 2545:2021-04-14
Test Procedures for Non-SAE Hydraulic Hoses (Stabilized: Apr 2021)
14.04.2021 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 2387:2021-03-08
Dimensions and Tolerances for Coolant System Hoses (Stabilized: Mar 2021)
08.03.2021 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 2025:2021-01-07
Method for Evaluating the Flow Properties of Pumpable Sealers (Stabilized: Jan 2021)
07.01.2021 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE J 1542:2020-12-10
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
10.12.2020 - PDF - Englisch - SAE
mehr dazu66,00 € -
NF R15-602-6 (11/2020)
Road vehicles - Test methods for cooling fluids - Part 6 : compatibility with hard water - Véhicules routiers - Méthodes d'essais des liquides de refroidissement - Partie 6 : Compatibilité avec une eau dure
01.11.2020 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
NF R15-602-5 (11/2020)
Road vehicles - Test methods for cooling fluids - Part 5 : measurement of the foaming tendencies - Véhicules routiers - Méthodes d'essais des liquides de refroidissement - Partie 5 : Mesurage de la tendance au moussage
01.11.2020 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF R15-602-7 (11/2020)
Road vehicles - Test methods of cooling fluids - Part 7 : measurement of corrosion protection properties - Corrosion test in glassware
01.11.2020 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
NBN ISO 21441:2020
Road vehicles — Engine EGR cooler — Heat dissipation test methods ISO 21441:2019
29.07.2020 - PDF - Englisch - NBN
mehr dazu121,00 € -
SAE J 1994:2020-04-28
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Heat Transfer and Pressure Drop Performance
28.04.2020 - PDF - Englisch - SAE
mehr dazu89,00 € -
79,00 €
-
BS ISO 21441:2019
Road vehicles. Engine EGR cooler. Heat dissipation test methods
14.10.2019 - PDF - Englisch - BSI
mehr dazu250,00 € -
SAE J 1339:2019-09-30
Test Method for Measuring Performance of Engine Cooling Fans
30.09.2019 - PDF - Englisch - SAE
mehr dazu79,00 € -
54,00 €
-
66,00 €
-
SAE J 1684:2018-11-21
Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials
21.11.2018 - PDF - Englisch - SAE
mehr dazu79,00 € -
96,00 €
-
107,00 €
-
135,00 €
-
SAE J 635:2018-06-02
Fan Hub Bolt Circles and Pilot Holes (Stabilized: Jun 2018)
02.06.2018 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE J 20/1:2018-03-04
Coolant Hose (Supplement to SAE J20 for Government Use Replacing Part of MS52130) (Stabilized: Mar 2018)
04.03.2018 - PDF - Englisch - SAE
mehr dazu87,00 € -
SAE J 20/2:2018-03-04
Coolant Hose - Normal Service Type Convoluted, Wire Support Hose (Supplement to SAE J20 for Government Use Replacing Part of MS51008) (Stabilized: Mar 2018)
04.03.2018 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 1536:2017-06-05
Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification
05.06.2017 - PDF - Englisch - SAE
mehr dazu47,00 € -
54,00 €
-
JIS D 1614:2017
Radiator for automobiles - Test method of heat dissipation
21.03.2017 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JASO E408:2017
Automotive parts - Oil cooler for powertrain - Test method of heat dissipation
01.01.2017 - PDF - Japanisch - JSAE
mehr dazu52,00 € -
ASTM D7583-16(2023)
Standard Test Method for John Deere Coolant Cavitation Test
01.04.2016 - PDF - Englisch - ASTM
mehr dazu78,00 € -
ASTM D7583-16(2023) + Redline
Standard Test Method for John Deere Coolant Cavitation Test
01.04.2016 - PDF - Englisch - ASTM
mehr dazu93,00 € -
SAE J 1638:2015-04-21
Compression Set of Hoses or Solid Discs (Stabilized: Apr 2015)
21.04.2015 - PDF - Englisch - SAE
mehr dazu70,00 € -
SAE J 2321/1:2013-05-31
Disposable Hydraulic Filter Element - 115 L/min Flow, 1.0 MPa Collapse Pressure, Filtration Ratio = 75 at 6 and 10 µm
31.05.2013 - PDF - Englisch - SAE
mehr dazu60,00 € -
SAE J 2321/2:2013-05-31
Disposable Hydraulic Filter Element - 190 L/min Flow, 21 MPa Collapse Pressure, Filtration Ratio = 75 at 7 µm
31.05.2013 - PDF - Englisch - SAE
mehr dazu54,00 € -
SAE J 2321/3:2013-05-31
Disposable Hydraulic Filter Elements - 21 MPa Collapse Pressure, Filtration Ratio = 75 at 10 µm, 75 to 175 L/Min
31.05.2013 - PDF - Englisch - SAE
mehr dazu66,00 € -
60,00 €
-
SAE J 1069:2012-05-02
Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines (Stabilized: May 2012)
02.05.2012 - PDF - Englisch - SAE
mehr dazu47,00 € -
JASO D404:2012
Thermometric switches applied for engine cooling systems of automobiles
01.01.2012 - PDF - Japanisch - JSAE
mehr dazu52,00 € -
SAE J 1937:2011-09-06
Engine Testing with Low-Temperature Charge Air-cooler Systems in a Dynamometer Test Cell (Stabilized: Sep 2011)
06.09.2011 - PDF - Englisch - SAE
mehr dazu96,00 € -
SAE J 614:2011-06-13
Engine and Transmission Dipstick Marking (Stabilized: Jun 2011)
13.06.2011 - PDF - Englisch - SAE
mehr dazu47,00 € -
JASO E406:2010
Heat dissipation test methods of intercoolers for automobiles
01.01.2010 - PDF - Japanisch - JSAE
mehr dazu52,00 € -
52,00 €
-
0,00 €
-
JIS D 2502-2:2009 (R2014)
Automotive parts - Pressure caps and filler necks for radiators - Part 2: Performance, test methods and marking
20.07.2009 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS D 2502-1:2009 (R2014)
Automotive parts - Pressure caps and filler necks for radiators - Part 1: Dimensions
20.07.2009 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS D 2602:2008 (R2013)
Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
20.10.2008 - PDF - Japanisch - JSA
mehr dazu25,00 € -
BS ISO 6415:2005
Verbrennungsmotoren. Wechselfilter fuer Schmieroel. Masse
05.12.2005 - PDF - Englisch - BSI
mehr dazu151,00 € -
ISO 6415:2005 (R2024)
Internal combustion engines
Spin-on filters for lubricating oil
13.06.2005 - Paper - Englisch - ISO
mehr dazu48,00 € -
JASO M358:2005
Standard test method for metal on metal friction characteristics of belt CVT fluids
01.01.2005 - - - JSAE
mehr dazu52,00 € -
JIS D 1611-1:2003 (R2023)
Automotive parts - Lubricating oil filters for internal combustion engines - Part 1: General test methods
20.11.2003 - PDF - Japanisch - JSA
mehr dazu55,51 € -
SAE J 2116:2003-07-31
Two-Stroke-Cycle Gasoline Engine Lubricants Performance and Service Classification
31.07.2003 - PDF - Englisch - SAE
mehr dazu66,00 € -
SAE J 2321:2002-12-13
Ship Systems and Equipment—General Specification for Filter Elements—Hydraulic and Lube Oil Service
13.12.2002 - PDF - Englisch - SAE
mehr dazu93,00 € -
BS ISO 11841-1:2000
Road vehicles and internal combustion engines. Filter vocabulary Definitions of filters filter components
15.05.2000 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 11841-2:2000
Road vehicles and internal combustion engines. Filter vocabulary Definitions of characteristics filters their components
15.05.2000 - PDF - Englisch - BSI
mehr dazu180,00 € -
52,00 €
-
JIS D 3904:1997 (R2016)
Automotive parts - Spin-on type oil filters for gasoline engines
31.03.1997 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS D 3904:1997 (R2021)
Automotive parts -- Spin-on type oil filters for gasoline engines
31.03.1997 - PDF - Englisch - JSA
mehr dazu34,00 € -
ASTM D6107-97(2023)
Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
01.01.1997 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM D6107-97(2023) + Redline
Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
01.01.1997 - PDF - Englisch - ASTM
mehr dazu63,00 € -
UNE 26432-2:1992 (R2013)
ROAD VEHICLES. ENGINE COOLING SYSTEMS. PART 2: TEST METHODS AND MARKING OF PRESSURE CAPS.
08.07.1992 - PDF - Spanisch - AENOR
mehr dazu17,00 € -
UNE 26432-1:1992 (R2013)
ROAD VEHICLES. ENGINE COOLING SYSTEMS. PART 1: DIMENSIONS OF PRESSURE CAPS AND THEIR RAMP SEATS ON FILLER NECKS.
02.07.1992 - PDF - Spanisch - AENOR
mehr dazu16,00 € -
48,00 €
-
48,00 €
-
48,00 €
-
48,00 €
-
NF R15-602-9 (12/1991) (R2011)
STRASSENFAHRZEUGE. KUEHLMITTEL. PRUEFMETHODEN. TEIL 9 : KORROSIONSSCHUTZMESSUNG. POLARISATIONSWIDERSTAND MESSMETHODE.
01.12.1991 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
NF R15-602-8 (12/1991) (R2011)
STRASSENFAHRZEUGE. KUEHLMITTEL. PRUEFMETHODEN. TEIL 8 : KORROSIONSSCHUTZMESSUNG. HEIZPLATTE-MESSMETHODE.
01.12.1991 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
NF R15-602-1 (06/1991) (R2011)
STRASSENFAHRZEUGE. KUEHLMITTEL. PRUEFMETHODEN. TEIL 1 : DICHTEMESSUNG MIT DICHTEMESSERN.
01.06.1991 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
NF R15-602-2 (06/1991) (R2011)
STRASSENFAHRZEUGE. KUEHLMITTEL. PRUEFMETHODEN. TEIL 2 : MESSUNG DES BRECHUNGS-KOEFFIZIENTS.
01.06.1991 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
NF R15-602-3 (06/1991) (R2011)
STRASSENFAHRZEUGE. KUEHLMITTEL. PRUEFMETHODEN. TEIL 3 : MESSUNG DES ASCHENGEHALTE.
01.06.1991 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
NF R15-602-4 (06/1991) (R2011)
STRASSENFAHRZEUGE. KUEHLMITTEL. PRUEFMETHODEN. TEIL 4 : MESSUNG DES SIEDEPUNKTES.
01.06.1991 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
52,00 €
-
39,35 €
-
NF R16-521 (09/1986) (R2011)
STRASSENFAHRZEUGE. KEGEL-SCHMIERNIPPEL MIT KONISCHEM GEWINDE MASSE.
01.09.1986 - Paper - Französisch - AFNOR
mehr dazu34,67 € -
NF R16-503 (10/1985) (R2001)
STRASSENFAHRZEUGE. FILTERELEMENTE FUER OELFILTER IM HAUPTSTROM. MASSE.
01.10.1985 - Paper - Französisch - AFNOR
mehr dazu34,67 € -
UNE 10088:1985
ROAD VEHICLES. SPIN ON FILTERS FOR LUBRICATING OIL. DIMENSIONS.
15.04.1985 - PDF - Spanisch - AENOR
mehr dazu27,00 € -
DIN ISO 7747:1984-04
Road vehicles, filter elements for full flow oil filters, dimensions
01.04.1984 - PDF - Deutsche - DIN
mehr dazu39,35 € -
ISO 7747:1983 (R2018)
Road vehicles
Filter elements for full flow oil filters
01.06.1983 - Paper - Französisch - ISO
mehr dazu48,00 € -
ISO 7747:1983 (R2018)
Road vehicles
Filter elements for full flow oil filters
01.06.1983 - Paper - Englisch - ISO
mehr dazu48,00 € -
25,67 €
-
25,67 €
-
25,67 €
-
22,99 €
-
NF R16-506 (11/1975)
AUF WARMEMOTOREN AUFGESCHRAUBTE OELFILTER-VERSUCHSMETHODEN.
01.11.1975 - Paper - Französisch - AFNOR
mehr dazu48,00 €