25.040.10 : Bearbeitungszentren
-
NBN ISO 10791-2:2023
Conditions d'essai pour centres d'usinage — Partie 2: Essais géométriques des machines à broche verticale (axe Z vertical) ISO 10791-2:2023
22.09.2023 - PDF - Französisch - NBN
mehr dazu205,00 € -
NBN ISO 10791-2:2023
Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis) ISO 10791-2:2023
22.09.2023 - PDF - Englisch - NBN
mehr dazu205,00 € -
BS ISO 10791-2:2023 + Redline
Tracked Changes. Test conditions for machining centres Geometric tests machines with vertical spindle (vertical Z-axis)
08.06.2023 - PDF - Englisch - BSI
mehr dazu586,00 € -
BS ISO 10791-2:2023
Test conditions for machining centres Geometric tests machines with vertical spindle (vertical Z-axis)
07.06.2023 - PDF - Englisch - BSI
mehr dazu449,00 € -
NF ISO 10791-2, E60-172-2 (06/2023)
Conditions d'essai pour centres d'usinage - Partie 2 : essais géométriques des machines à broche verticale (axe Z vertical)
01.06.2023 - Paper - Französisch - AFNOR
mehr dazu185,67 € -
NBN ISO 10791-10:2023
Conditions d'essai des centres d'usinage — Partie 10: Évaluation des déformations thermiques ISO 10791-10:2022
06.02.2023 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN ISO 10791-10:2023
Test conditions for machining centres — Part 10: Evaluation of thermal distortions ISO 10791-10:2022
06.02.2023 - PDF - Englisch - NBN
mehr dazu163,00 € -
NF ISO 10791-10, E60-172-10 (12/2022)
Test conditions for machining centres - Part 10 : Evaluation of thermal distortions
01.12.2022 - Paper - Französisch - AFNOR
mehr dazu119,00 € -
BS ISO 10791-10:2022
Test conditions for machining centres Evaluation of thermal distortions
31.10.2022 - PDF - Englisch - BSI
mehr dazu348,00 € -
BS ISO 10791-10:2022 + Redline
Tracked Changes. Test conditions for machining centres Evaluation of thermal distortions
13.10.2022 - PDF - Englisch - BSI
mehr dazu454,00 € -
NBN ISO 10791-7:2021
Test conditions for machining centres ? Part 7: Accuracy of finished test pieces
07.06.2021 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN ISO 10791-7:2021
Test conditions for machining centres — Part 7: Accuracy of finished test pieces ISO 10791-7:2020
07.06.2021 - PDF - Englisch - NBN
mehr dazu163,00 € -
NBN ISO 17543-1:2021
Machine tools ? Test conditions for universal spindle heads ? Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)
07.06.2021 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN ISO 17543-1:2021
Machine tools — Test conditions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis) ISO 17543-1:2020
07.06.2021 - PDF - Englisch - NBN
mehr dazu163,00 € -
NF ISO 10791-7, E60-172-7 (06/2020)
Prüfbedingungen für Bearbeitungszentren - Teil 7 : Genauigkeit eines fertigbearbeiteten Prüfwerkstückes
01.06.2020 - Paper - Französisch - AFNOR
mehr dazu119,00 € -
BS ISO 17543-1:2020
Machine tools. Test conditions for universal spindle heads Accessory machines with horizontal (horizontal Z-axis)
15.04.2020 - PDF - Englisch - BSI
mehr dazu348,00 € -
BS ISO 10791-1:2015 + Redline
Tracked Changes. Test conditions for machining centres Geometric tests machines with horizontal spindle (horizontal Z-axis)
26.02.2020 - PDF - Englisch - BSI
mehr dazu492,00 € -
BS ISO 10791-7:2020
Test conditions for machining centres Accuracy of finished test pieces
06.02.2020 - PDF - Englisch - BSI
mehr dazu348,00 € -
16/30327831 DC:2016
BS ISO 10791-7 AMD1. Test conditions for machining centres. Part 7. Accuracy of finished test pieces
29.09.2016 - PDF - Englisch - BSI
mehr dazu24,00 € -
NF ISO 10791-1, E60-172-1 (03/2016)
Prüfbedingungen für Bearbeitungszentren - Teil 1 : Geometrische Prüfungen für Maschinen mit waagerechter Spindel und mit zusätzlichen Frätzlichen Fräsköpfen (waagerechte Z-Achse)
01.03.2016 - Paper - Französisch - AFNOR
mehr dazu154,50 € -
UNE-EN ISO 11064-4:2013
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) (Endorsed by AENOR in April of 2015.)
01.04.2015 - PDF - Englisch - AENOR
mehr dazu76,00 € -
BS ISO 10791-1:2015
Test conditions for machining centres Geometric tests machines with horizontal spindle (horizontal Z-axis)
28.02.2015 - PDF - Englisch - BSI
mehr dazu377,00 € -
NF ISO 10791-6, E60-172-6 (02/2015)
Prüfbedingungen für Bearbeitungszentren - Teil 6 : Geranigkeit der Vorschübe, Drehzahlen und Interpolationen
01.02.2015 - Paper - Französisch - AFNOR
mehr dazu130,50 € -
BS ISO 10791-6:2014
Test conditions for machining centres Accuracy of speeds and interpolations
31.01.2015 - PDF - Englisch - BSI
mehr dazu348,00 € -
ISO 10791-1:2015 (R2023)
Test conditions for machining centres
Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
21.01.2015 - Paper - Französisch - ISO
mehr dazu248,00 € -
ISO 10791-1:2015 (R2023)
Test conditions for machining centres
Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
21.01.2015 - Paper - Englisch - ISO
mehr dazu248,00 € -
ISO 10791-6:2014 (R2020)
Test conditions for machining centres
Part 6: Accuracy of speeds and interpolations
05.12.2014 - Paper - Französisch - ISO
mehr dazu199,00 € -
ISO 10791-6:2014 (R2020)
Test conditions for machining centres
Part 6: Accuracy of speeds and interpolations
05.12.2014 - Paper - Englisch - ISO
mehr dazu199,00 € -
JIS B 6336-10:2014
Test conditions for machining centres - Part 10: Evaluation of thermal distortions
20.05.2014 - PDF - Japanisch - JSA
mehr dazu25,00 € -
VDI/NCG 5211 Blatt 2:2013-09
Prüfrichtlinien und Prüfwerkstücke für hochdynamische Bearbeitungen (HSC), Fräsmaschinen und Bearbeitungszentren - 5-Achs-Simultan-Fräsbearbeitung
01.09.2013 - PDF - Englisch, Deutsch - VDI
mehr dazu183,50 € -
VDI/NCG 5211 Blatt 1:2013-08
Prüfrichtlinien und Prüfwerkstücke für hochdynamische Bearbeitungen (HSC) - Fräsmaschinen und Bearbeitungszentren für 3-Achs-Bearbeitung
01.08.2013 - PDF - Englisch, Deutsch - VDI
mehr dazu122,25 € -
UNE-EN ISO 11064-5:2008
Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) (Endorsed by AENOR in December of 2009.)
01.12.2009 - PDF - Englisch - AENOR
mehr dazu88,00 € -
ASME B5.54-2005 (R2020)
Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers
25.03.2005 - Papier - Englisch - ASME
mehr dazu163,00 € -
UNE 15450-2:2004
Machine-tools. Test conditions for machining centres. Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z axis).
12.03.2004 - PDF - Spanisch - AENOR
mehr dazu86,00 € -
UNE 15450-8:2003 ERRATUM
Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
21.11.2003 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE 15450-9:2003
Machine-tools. Test conditions for machining centres. Part 9: Evaluation of the operating times of tool change and pallet change.
31.10.2003 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
JIS B 6336-2:2002 (R2016)
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
20.01.2002 - PDF - Japanisch - JSA
mehr dazu46,02 € -
JIS B 6336-8:2002 (R2016)
Test conditions for machining centres - Part 8: Evaluation of the contouring performance in the three coordinate planes
20.01.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 6336-9:2002 (R2016)
Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
20.01.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
BS ISO 10791-8:2001
Test conditions for machining centres Evaluation of contouring performance in the three coordinate planes
15.06.2001 - PDF - Englisch - BSI
mehr dazu151,00 € -
NF ISO 10791-8, E60-172-8 (06/2001)
Prüfbedingungen für Bearbeitungszentren - Teil 8 : Bestimmung der Bahnabweichung in den drei Raumebenen
01.06.2001 - Paper - Französisch - AFNOR
mehr dazu60,50 € -
NF ISO 10791-9, E60-172-9 (06/2001)
Prüfbedingungen für Bearbeitungszentren - Teil 9 : Bestimmung der Werkzeug und Palettenwechselzeit
01.06.2001 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
BS ISO 10791-9:2001
Test conditions for machining centres Evaluation of the operating times tool change and pallet
15.05.2001 - PDF - Englisch - BSI
mehr dazu250,00 € -
ISO 10791-8:2001 (R2023)
Test conditions for machining centres
Part 8: Evaluation of contouring performance in the three coordinate planes
29.03.2001 - Paper - Französisch - ISO
mehr dazu48,00 € -
ISO 10791-8:2001 (R2023)
Test conditions for machining centres
Part 8: Evaluation of contouring performance in the three coordinate planes
29.03.2001 - Paper - Englisch - ISO
mehr dazu48,00 € -
UNE 15450-8:2001
Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
29.03.2001 - PDF - Spanisch - AENOR
mehr dazu52,00 € -
ISO 10791-9:2001 (R2023)
Test conditions for machining centres
Part 9: Evaluation of the operating times of tool change and pallet change
15.03.2001 - Paper - Französisch - ISO
mehr dazu110,00 € -
ISO 10791-9:2001 (R2023)
Test conditions for machining centres
Part 9: Evaluation of the operating times of tool change and pallet change
15.03.2001 - Paper - Englisch - ISO
mehr dazu110,00 € -
NBN EN ISO 11064-2:2001
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
06.02.2001 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN EN ISO 11064-2:2001
Ergonomische Gestaltung von Kontrollzentren – Teil 2: Grundsätze für die Anordnung von Kontrollräumen (ISO 11064-2:2000)
06.02.2001 - PDF - Deutsche - NBN
mehr dazu89,00 € -
NBN EN ISO 11064-2:2001
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
06.02.2001 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN EN ISO 11064-1:2001
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
06.02.2001 - PDF - Französisch - NBN
mehr dazu142,00 € -
NBN EN ISO 11064-1:2001
Ergonomische Gestaltung von Kontrollzentren - Teil 1: Grundsätze für die Gestaltung von Kontrollzentren (ISO 11064-1:2000)
06.02.2001 - PDF - Deutsche - NBN
mehr dazu142,00 € -
NBN EN ISO 11064-1:2001
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
06.02.2001 - PDF - Englisch - NBN
mehr dazu142,00 € -
DIN ISO 10791-4:2001-01
Werkzeugmaschinen - Prüfbedingungen für Bearbeitungszentren - Teil 4: Genauigkeit und Wiederholpräzision der Positionierung linearer und rotierender Achsen (ISO 10791-4:1998)
01.01.2001 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN ISO 10791-4:2001-01
Werkzeugmaschinen - Prüfbedingungen für Bearbeitungszentren - Teil 4: Genauigkeit und Wiederholpräzision der Positionierung linearer und rotierender Achsen (ISO 10791-4:1998)
01.01.2001 - PDF - Englisch - DIN
mehr dazu57,57 € -
DIN ISO 10791-3:2001-01
Werkzeugmaschinen - Prüfbedingungen für Bearbeitungszentren - Teil 3: Geometrische Prüfungen für Maschinen mit eingebautem schaltbaren oder stetig bewegtem Universal-Fräskopf (senkrechte Z-Achse) (ISO 10791-3:1998)
01.01.2001 - PDF - Deutsche - DIN
mehr dazu110,00 € -
DIN ISO 10791-3:2001-01
Werkzeugmaschinen - Prüfbedingungen für Bearbeitungszentren - Teil 3: Geometrische Prüfungen für Maschinen mit eingebautem schaltbaren oder stetig bewegtem Universal-Fräskopf (senkrechte Z-Achse) (ISO 10791-3:1998)
01.01.2001 - PDF - Englisch - DIN
mehr dazu137,85 € -
JIS B 6336-3:2000 (R2015)
Test conditions for machining centers - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
20.12.2000 - PDF - Japanisch - JSA
mehr dazu50,18 € -
JIS B 6336-4:2000 (R2015)
Test conditions for machining centers - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
20.12.2000 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 6336-5:2000 (R2015)
Test conditions for machining centers - Part 5: Accuracy and repeatability of positioning of work-holding pallets
20.12.2000 - PDF - Japanisch - JSA
mehr dazu25,00 € -
UNE 15450-5:2000
Machine-tools. Test conditions of machining centres. Part 5: Accuracy and repeatability of positioning of working-holding pallets.
10.11.2000 - PDF - Spanisch - AENOR
mehr dazu53,00 € -
UNE 15450-1:2000
Machine-tools. Test conditions of machining centres. Part 1: Geometric test for machines with horizontal spindle and with accessory heads (horizontal Z axis).
30.09.2000 - PDF - Spanisch - AENOR
mehr dazu101,00 € -
UNE 15450-3:2000
Machine-tools. Test conditions of machining centres. Part 3: Geometric test for machines with integral indexable or continuous universal heads (horizontal Z axis).
30.09.2000 - PDF - Spanisch - AENOR
mehr dazu95,00 € -
UNE 15450-4:2000
Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.
21.09.2000 - PDF - Spanisch - AENOR
mehr dazu52,00 € -
ISO 10791-3:1998/Cor 1:1999
Test conditions for machining centres
Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
11.11.1999 - Paper - Englisch - ISO
mehr dazu0,00 € -
ISO 10791-3:1998/Cor 1:1999
Test conditions for machining centres
Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
11.11.1999 - Paper - Französisch - ISO
mehr dazu0,00 € -
JIS Z 8503-3:1999 (R2015)
Ergonomic design of control centres - Part 3: Control room layout
20.10.1999 - PDF - Japanisch - JSA
mehr dazu41,86 € -
NF ISO 10791-3, E60-172-3 (05/1999)
PRUEFBEDINGUNGEN FUER BEARBEITUNGSZENTREN. TEIL 3 : GEOMETRISCHE PRUEFUNGEN FUER MASCHINEN MIT INTEGRIERTEN WENDE- BZW. STETIGUNIVERSALKOEPEN (Z-VERTIKALACHSE).
01.05.1999 - Paper - Französisch - AFNOR
mehr dazu144,67 € -
BS ISO 10791-3:1998
Pruefbedingungen fuer Bearbeitungszentren. Geometrische Pruefungen fuer Maschinen mit eingebauten schaltbaren oder stetig bewegtem Universal-Fraeskopf (Vertikale Z-Achse)
15.03.1999 - PDF - Englisch - BSI
mehr dazu348,00 € -
IEC TR 60877:1999
Reinigungsverfahren für Meß- und Regeleinrichtungen zum Einsatz in Sauerstoff
07.01.1999 - PDF - Englisch, Französisch - IEC
mehr dazu92,00 € -
ISO 10791-3:1998 (R2020)
Test conditions for machining centres
Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
20.12.1998 - Paper - Französisch - ISO
mehr dazu199,00 € -
ISO 10791-3:1998 (R2020)
Test conditions for machining centres
Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
20.12.1998 - Paper - Englisch - ISO
mehr dazu199,00 € -
NF ISO 10791-5, E60-172-5 (09/1998)
PRUEFBEDINGUNGEN FUER BEARBEITUNGSZENTREN. TEIL 5 : SICHERHEIT UND WIEDERHOLBARKEIT DER POSITIONIERUNG VON WERKSTUECKHALTEPALETTEN.
01.09.1998 - Paper - Französisch - AFNOR
mehr dazu60,50 € -
NF ISO 10791-4, E60-172-4 (09/1998)
PRUEFBEDINGUNGEN FUER BEARBEITUNGSZENTREN. TEIL 4 : POSITIONERUNGSICHERHEIT UND WIEDERHOLBARKEIT DER POSITIONIERUNG FUER LINEARE UND ROTIERENDE ACHSEN.
01.09.1998 - Paper - Französisch - AFNOR
mehr dazu60,50 € -
BS ISO 10791-4:1998
Pruefbedingungen fuer Bearbeitungszentren. Genauigkeit und Wiederholpraezision der Positionierung linearer und rotierender Achsen
15.08.1998 - PDF - Englisch - BSI
mehr dazu151,00 € -
ISO 10791-4:1998 (R2020)
Test conditions for machining centres
Part 4: Accuracy and repeatability of positioning of linear and rotary axes
18.06.1998 - Paper - Französisch - ISO
mehr dazu72,00 € -
ISO 10791-4:1998 (R2020)
Test conditions for machining centres
Part 4: Accuracy and repeatability of positioning of linear and rotary axes
18.06.1998 - Paper - Englisch - ISO
mehr dazu72,00 € -
BS ISO 10791-5:1998
Pruefbedingungen fuer Bearbeitungszentren. Genauigkeit und Wiederholpraezision der Positionierung von Werkstueckaufnahme-Paletten
15.05.1998 - PDF - Englisch - BSI
mehr dazu180,00 € -
ISO 10791-5:1998 (R2020)
Test conditions for machining centres
Part 5: Accuracy and repeatability of positioning of work-holding pallets
26.02.1998 - Paper - Englisch - ISO
mehr dazu72,00 € -
ISO 10791-5:1998 (R2020)
Test conditions for machining centres
Part 5: Accuracy and repeatability of positioning of work-holding pallets
26.02.1998 - Paper - Französisch - ISO
mehr dazu72,00 € -
ISO 9524:1993 (R2017)
Machine tools
Front faces of spindle holders for machining centres
09.09.1993 - Paper - Französisch - ISO
mehr dazu72,00 € -
ISO 9524:1993 (R2017)
Machine tools
Front faces of spindle holders for machining centres
09.09.1993 - Paper - Englisch - ISO
mehr dazu72,00 € -
25,00 €
-
NF F01-014 (11/1974) (R2009)
EISENBAHN-FAHRZEUGE.VERSTARKTE BEARBEITUNGSSPITZEN TYP A UND TYP C FUR ACHSWELLEN.
01.11.1974 - Paper - Französisch - AFNOR
mehr dazu25,67 €