23.100 : Hydraulische und pneumatische Antriebe
-
NBN ISO 3601-4:2024
Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) ISO 3601-4:2008
12.03.2024 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN ISO 3601-2:2024
Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 2: Dimensions des logements pour applications générales ISO 3601-2:2016
12.03.2024 - PDF - Französisch - NBN
mehr dazu184,00 € -
NBN ISO 3601-2:2024
Fluid power systems — O-rings — Part 2: Housing dimensions for general applications ISO 3601-2:2016
12.03.2024 - PDF - Englisch - NBN
mehr dazu184,00 € -
24/30464957 DC:2024
BS ISO 7368 Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
01.02.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
24/30468772 DC:2024
BS ISO 11237 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -Specification
30.01.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN ISO 12829:2024
Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope ISO 12829:2023
25.01.2024 - PDF - Englisch - NBN
mehr dazu89,00 € -
BS ISO 6953-1:2024 + Redline
Tracked Changes. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to include in supplier's literature product-marking requirements
22.01.2024 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS ISO 6953-2:2024 + Redline
Tracked Changes. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics include in supplier’s literature
22.01.2024 - PDF - Englisch - BSI
mehr dazu432,00 € -
BS ISO 6953-2:2024
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics include in supplier’s literature
18.01.2024 - PDF - Englisch - BSI
mehr dazu331,00 € -
BS ISO 6953-1:2024
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to include in supplier's literature product-marking requirements
17.01.2024 - PDF - Englisch - BSI
mehr dazu180,00 € -
DIN ISO 8133:2024-01
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022)
01.01.2024 - PDF - Deutsche - DIN
mehr dazu79,72 € -
DIN ISO 12151-3:2024-01
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2021)
01.01.2024 - PDF - Deutsche - DIN
mehr dazu72,80 € -
NF ISO 6953-1, E49-330-1 (01/2024)
Transmissions pneumatiques - Régulateurs de pression et filtresrégulateurs pour air comprimé - Partie 1 : principales caractéristiques à inclure dans la documentation des fournisseurs et exigences de marquage du produit
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
NF ISO 6953-2, E49-330-2 (01/2024)
Transmissions pneumatiques - Régulateurs de pression et filtres régulateurs pour air comprimé - Partie 2 : méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseurs
01.01.2024 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
SAE J 518/2:2023-12-26
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection - Part 2: 42 MPa (Code 62)
26.12.2023 - PDF - Englisch - SAE
mehr dazu111,00 € -
NBN ISO 5352-1:2023
Transmissions hydrauliques — Détermination du débit de décharge et des pertes thermiques des accumulateurs hydro-pneumatiques — Partie 1: Méthode d'essai ISO 5352-1:2023
11.12.2023 - PDF - Französisch - NBN
mehr dazu121,00 € -
NBN ISO 5352-1:2023
Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method ISO 5352-1:2023
11.12.2023 - PDF - Englisch - NBN
mehr dazu121,00 € -
BS EN ISO 4413:2010
Hydraulic fluid power. General rules and safety requirements for systems and their components
07.12.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
NF ISO 5119, E48-570 (12/2023)
Capacité d'étanchéité à basse température des joints en élastomère - Méthodes d'essai
01.12.2023 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
BS ISO 12829:2023 + Redline
Tracked Changes. Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
30.11.2023 - PDF - Englisch - BSI
mehr dazu222,00 € -
BS ISO 5119:2023
Low temperature sealing capability of elastomeric seals. Test methods
28.11.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 12829:2023
Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
27.11.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
47,00 €
-
BS EN 17877:2023
Dynamic mixers and agitators. Definitions and hydraulic characterizations
14.11.2023 - PDF - Englisch - BSI
mehr dazu348,00 € -
NBN EN 17877:2023
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
09.11.2023 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN EN 17877:2023
Dynamic mixers and agitators - Definitions and hydraulic characterizations
09.11.2023 - PDF - Englisch - NBN
mehr dazu163,00 € -
DIN ISO 8132:2023-11
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2022)
01.11.2023 - PDF - Deutsche - DIN
mehr dazu79,72 € -
DIN ISO 12151-2:2023-11
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings (ISO 12151-2:2022), Text in German and English
01.11.2023 - PDF - Englisch, Deutsch - DIN
mehr dazu72,80 € -
SAE J 1754/1:2023-11-01
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document
01.11.2023 - PDF - Englisch - SAE
mehr dazu96,00 € -
NF EN 17877, E44-601 (11/2023)
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
01.11.2023 - Paper - Französisch - AFNOR
mehr dazu119,00 € -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
31.10.2023 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
31.10.2023 - PDF - Englisch - AENOR
mehr dazu75,60 € -
96,00 €
-
SAE J 343:2023-10-05
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
05.10.2023 - PDF - Englisch - SAE
mehr dazu83,00 € -
NF ISO 5352-1, E48-154-1 (10/2023)
Transmissions hydrauliques - Détermination du débit de décharge et des pertes thermiques des accumulateurs hydropneumatiques - Partie 1 : méthode d'essai
01.10.2023 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
BS ISO 5352-1:2023
Hydraulic fluid power. Determination of discharge flow rate and thermal losses gas loaded accumulators Test method
28.09.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
PD ISO/TS 11686:2023 + Redline
Tracked Changes. Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
21.09.2023 - PDF - Englisch - BSI
mehr dazu235,00 € -
PD ISO/TS 11686:2023
Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
19.09.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
23/30446468 DC:2023
BS ISO 21018-1 Hydraulic fluid power. Monitoring the level of particulate contamination Part 1. General principles
04.09.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
DIN EN 13001-3-6:2023-09
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders, German version EN 13001-3-6:2018+A1:2021
01.09.2023 - PDF - Deutsche - DIN
mehr dazu136,82 € -
VG 95925-4:2023-09
Hose assemblies - Part 4: Part numbers, for replacement only, Text in German and English
01.09.2023 - PDF - Englisch, Deutsch - DIN
mehr dazu110,00 € -
NF ISO 7241, E48-058 (08/2023)
Transmissions hydrauliques - Dimensions et exigences des raccords rapides
01.08.2023 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
BS ISO 7241:2023 + Redline
Tracked Changes. Hydraulic fluid power. Dimensions and requirements of quick-action couplings
13.07.2023 - PDF - Englisch - BSI
mehr dazu382,00 € -
BS ISO 7241:2023
Hydraulic fluid power. Dimensions and requirements of quick-action couplings
12.07.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
ASTM D4174-23
Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
01.07.2023 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM D4174-23 + Redline
Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
01.07.2023 - PDF - Englisch - ASTM
mehr dazu72,00 € -
NF ISO 16028, E48-056 (06/2023)
Transmissions hydrauliques - Dimensions et exigences des raccords rapides de type à face plane
01.06.2023 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
60,00 €
-
SAE J 1926/3:2023-05-10
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
10.05.2023 - PDF - Englisch - SAE
mehr dazu93,00 € -
SAE J 1341:2023-05-01
Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses (Stabilized: May 2023)
01.05.2023 - PDF - Englisch - SAE
mehr dazu60,00 € -
DIN EN ISO 1179-2:2023-05
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022), German version EN ISO 1179-2:2022
01.05.2023 - PDF - Deutsche - DIN
mehr dazu72,80 € -
PD ISO/TR 6057:2023
Hydraulic fluid power. Sample calculations for ISO 11171
24.04.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
23/30456358 DC:2023
BS ISO 12829. Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
04.04.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
DIN ISO 10100:2023-04
Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)
01.04.2023 - PDF - Deutsche - DIN
mehr dazu65,89 € -
PR NF ISO 11619, E49-100PR (04/2023)
Transmissions pneumatiques - Tubes en polyuréthane et en polyamide destinés à être utilisés principalement dans des installations pneumatiques - Dimensions et spécifications
01.04.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu80,50 € -
BS ISO 16028:2023 + Redline
Tracked Changes. Hydraulic fluid power. Dimensions and requirements of quick-action couplings, flush-face type
30.03.2023 - PDF - Englisch - BSI
mehr dazu235,00 € -
NBN ISO 11500:2023
Transmissions hydrauliques — Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière ISO 11500:2022
28.03.2023 - PDF - Französisch - NBN
mehr dazu121,00 € -
NBN ISO 11500:2023
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle ISO 11500:2022
28.03.2023 - PDF - Englisch - NBN
mehr dazu121,00 € -
NBN ISO 23369:2023
Hydraulic fluid power — Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions ISO 23369:2022
28.03.2023 - PDF - Englisch - NBN
mehr dazu142,00 € -
BS ISO 16028:2023
Hydraulic fluid power. Dimensions and requirements of quick-action couplings, flush-face type
27.03.2023 - PDF - Englisch - BSI
mehr dazu180,00 € -
BS ISO 16030:2022 + Redline
Tracked Changes. Pneumatic fluid power. Connections. Ports and stud ends
13.03.2023 - PDF - Englisch - BSI
mehr dazu326,00 € -
SAE J 518/1:2023-03-01
Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61)
01.03.2023 - PDF - Englisch - SAE
mehr dazu109,00 € -
NF ISO 12238, E49-095 (03/2023)
Transmissions pneumatiques - Distributeurs de commande directionnels - Mesure du temps de basculement
01.03.2023 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
SAE J 1926/2:2023-03-01
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends
01.03.2023 - PDF - Englisch - SAE
mehr dazu89,00 € -
BS ISO 12238:2023 + Redline
Tracked Changes. Pneumatic fluid power. Directional control valves. Measurement of shifting time
27.02.2023 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 12238:2023
Pneumatic fluid power. Directional control valves. Measurement of shifting time
23.02.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
NF ISO 11500, E48-658 (02/2023)
Transmissions hydrauliques - Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière
01.02.2023 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
BS ISO 23369:2022 + Redline
Tracked Changes. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
23.01.2023 - PDF - Englisch - BSI
mehr dazu382,00 € -
BS ISO 23369:2022
Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
20.01.2023 - PDF - Englisch - BSI
mehr dazu293,00 € -
UNE-EN ISO 6149-1:2023
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
18.01.2023 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 6149-1:2023
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
18.01.2023 - PDF - Englisch - AENOR
mehr dazu72,00 € -
NBN ISO 11171:2023
Hydraulic fluid power — Calibration of automatic particle counters for liquids ISO 11171:2022
18.01.2023 - PDF - Englisch - NBN
mehr dazu184,00 € -
NBN ISO 4405:2023
Transmissions hydrauliques — Pollution des fluides — Détermination de la pollution particulaire par la méthode gravimétrique ISO 4405:2022
17.01.2023 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN ISO 4405:2023
Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method ISO 4405:2022
17.01.2023 - PDF - Englisch - NBN
mehr dazu89,00 € -
SAE J 1926/1:2023-01-17
Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing
17.01.2023 - PDF - Englisch - SAE
mehr dazu87,00 € -
BS ISO 11500:2022 + Redline
Tracked Changes. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
05.01.2023 - PDF - Englisch - BSI
mehr dazu326,00 € -
PR NF EN IEC 63458-1, C73-458-1PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 1 : Unité à jet d'eau à haute pression
01.01.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu107,50 € -
PR NF EN IEC 63458-2, C73-458-2PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 2 : Flexibles, tuyauteries flexibles et connecteurs à haute pression
01.01.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu64,50 € -
PR NF EN IEC 63458-3, C73-458-3PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 3 : Dispositif pulvérisateur à haute pression
01.01.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu97,50 € -
BS ISO 11500:2022
Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
23.12.2022 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 10094-2:2021 + Redline
Tracked Changes. Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics include in the supplier's literature
09.12.2022 - PDF - Englisch - BSI
mehr dazu382,00 € -
NF ISO 12151-2, E48-079-2 (12/2022)
Raccordements pour transmissions hydrauliques et applications générales - Flexibles de raccordement - Partie 2 : Flexibles avec embouts à cône à 24 degrés et joints toriques conformes à l'ISO 8434-1
01.12.2022 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
BS EN ISO 1179-2:2022 + Redline
Tracked Changes. Connections for general use and fluid power. Ports stud ends with ISO 228-1 threads elastomeric or metal-to-metal sealing Heavy-duty (S series) light-duty (L (type E)
30.11.2022 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS EN ISO 1179-2:2022
Connections for general use and fluid power. Ports stud ends with ISO 228-1 threads elastomeric or metal-to-metal sealing Heavy-duty (S series) light-duty (L (type E)
25.11.2022 - PDF - Englisch - BSI
mehr dazu180,00 € -
NBN EN ISO 1179-2:2022
Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 228-1 à joint en élastomère ou étanchéité métal sur métal - Partie 2: Éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E) (ISO 1179-2:2022)
24.11.2022 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 1179-2:2022
Leitungsanschlüsse für allgemeine Anwendung und Fluidtechnik - Einschraublöcher und Einschraubzapfen mit Gewinde nach ISO 228-1 und Elastomerdichtung oder metallener Dichtkante - Teil 2: Einschraubzapfen mit Elastomerdichtung (Form E), schwere (S) und leichte Reihe (L) (ISO 1179-2:2022)
24.11.2022 - PDF - Deutsche - NBN
mehr dazu58,00 € -
NBN EN ISO 1179-2:2022
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
24.11.2022 - PDF - Englisch - NBN
mehr dazu58,00 € -
22/30423707 DC:2022
BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
22.11.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS ISO 8132:2022 + Redline
Tracked Changes. Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
08.11.2022 - PDF - Englisch - BSI
mehr dazu326,00 € -
NF EN ISO 1179-2, E49-051-2 (11/2022)
Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 228-1 à joint en élastomère ou étanchéité métal sur métal - Partie 2 : éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E)
01.11.2022 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
BS ISO 12151-2:2022 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-1 24° cone connector ends O-rings
01.11.2022 - PDF - Englisch - BSI
mehr dazu235,00 € -
VG 95925-2:2022-11
Hose assemblies - Part 2: For fluid power service - Part numbers, Text in German and English
01.11.2022 - PDF - Englisch, Deutsch - DIN
mehr dazu141,96 € -
NF ISO 4405, E48-652 (11/2022)
Transmissions hydrauliques - Pollution des fluides - Détermination de la pollution particulaire par la méthode gravimétrique
01.11.2022 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
BS ISO 16889:2022 + Redline
Tracked Changes. Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element
01.11.2022 - PDF - Englisch - BSI
mehr dazu454,00 € -
BS ISO 16889:2022
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element
31.10.2022 - PDF - Englisch - BSI
mehr dazu348,00 € -
BS ISO 12151-2:2022
Connections for hydraulic fluid power and general use — Hose fittings Part 2: with ISO 8434-1 24° cone connector ends O-rings
27.10.2022 - PDF - Englisch - BSI
mehr dazu180,00 € -
NF ISO 15086-3, E48-392-3 (10/2022)
Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 3 : Measurement of hydraulic impedance
01.10.2022 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF ISO 16030, E49-052 (10/2022)
Transmissions pneumatiques - Raccordements - Orifices et éléments mâles
01.10.2022 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
250,00 €
-
DIN EN ISO 6149-1:2022-09
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022), German version EN ISO 6149-1:2022
01.09.2022 - PDF - Deutsche - DIN
mehr dazu65,89 € -
PR NF ISO 20145, E49-360PR (09/2022)
Transmissions pneumatiques - Méthodes d'essai de mesure du niveau de pression d'émission acoustique des silencieux d'échappement
01.09.2022 - Paper - Englisch, Französisch - AFNOR
mehr dazu115,50 € -
BS ISO 8132:2022
Hydraulic fluid power. Mounting dimensions for accessories forsingle rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar)series
18.08.2022 - PDF - Englisch - BSI
mehr dazu250,00 € -
22/30456361 DC:2022
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
17.08.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN ISO 6149-1:2022 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Ports stud ends with ISO 261 metric threads O-ring sealing truncated housing seal
11.08.2022 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS ISO 4405:2022
Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the gravimetric method
11.08.2022 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 15086-3:2022
Hydraulic fluid power. Determination of the fluid-borne noise characteristics components and systems Measurement hydraulic impedance
09.08.2022 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS EN ISO 6149-1:2022
Connections for hydraulic fluid power and general use. Ports stud ends with ISO 261 metric threads O-ring sealing truncated housing seal
03.08.2022 - PDF - Englisch - BSI
mehr dazu180,00 € -
DIN ISO 3601-1:2022-08
Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012 + Amd.1:2019), Text in German and English
01.08.2022 - PDF - Englisch, Deutsch - DIN
mehr dazu110,00 € -
DIN EN 17877:2022-08
Dynamic mixers and agitators - Definitions and hydraulic characterizations, German and English version prEN 17877:2022
01.08.2022 - PDF - Englisch, Deutsch - DIN
mehr dazu120,84 € -
SAE J 1065:2022-07-26
Nominal Reference Working Pressures for Steel Hydraulic Tubing
26.07.2022 - PDF - Englisch - SAE
mehr dazu93,00 € -
BS ISO 11171:2022 + Redline
Tracked Changes. Hydraulic fluid power. Calibration of automatic particle counters for liquids
07.07.2022 - PDF - Englisch - BSI
mehr dazu454,00 € -
22/30457577 DC:2022
BS EN 17877. Dynamic mixers and agitators. Definitions and hydraulic characterizations
07.07.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN EN ISO 6149-1:2022
Leitungsanschlüsse für Fluidtechnik und allgemeine Anwendung - Einschraublöcher und Einschraubzapfen mit metrischem Gewinde nach ISO 261 und O-Ring-Abdichtung - Teil 1: Einschraublöcher mit Ansenkung für O-Ring-Abdichtung (ISO 6149-1:2022)
02.07.2022 - PDF - Französisch - NBN
mehr dazu37,00 € -
NBN EN ISO 6149-1:2022
Leitungsanschlüsse für Fluidtechnik und allgemeine Anwendung - Einschraublöcher und Einschraubzapfen mit metrischem Gewinde nach ISO 261 und O-Ring-Abdichtung - Teil 1: Einschraublöcher mit Ansenkung für O-Ring-Abdichtung (ISO 6149-1:2022)
02.07.2022 - PDF - Englisch - NBN
mehr dazu37,00 € -
NBN EN ISO 6149-1:2022
Leitungsanschlüsse für Fluidtechnik und allgemeine Anwendung - Einschraublöcher und Einschraubzapfen mit metrischem Gewinde nach ISO 261 und O-Ring-Abdichtung - Teil 1: Einschraublöcher mit Ansenkung für O-Ring-Abdichtung (ISO 6149-1:2022)
02.07.2022 - PDF - Deutsche - NBN
mehr dazu37,00 € -
NF ISO 8133, E48-503 (07/2022)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
01.07.2022 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
BS ISO 8133:2022 + Redline
Tracked Changes. Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
28.06.2022 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 8133:2022
Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
16.06.2022 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 11171:2022
Hydraulic fluid power. Calibration of automatic particle counters for liquids
13.06.2022 - PDF - Englisch - BSI
mehr dazu348,00 € -
NF ISO 8132, E48-501 (06/2022)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
01.06.2022 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
NF EN ISO 6149-1, E48-050-1 (06/2022)
Raccordements pour transmissions hydrauliques et applications générales - Orifices et éléments mâles à filetage métrique ISO 261 et joint torique - Partie 1 : Orifices à joint torique dans un logement tronconique
01.06.2022 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
SAE J 1502:2022-05-26
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
26.05.2022 - PDF - Englisch - SAE
mehr dazu75,00 € -
SAE J 515:2022-05-26
Specification for O-Ring Materials Used with Hydraulic Connectors
26.05.2022 - PDF - Englisch - SAE
mehr dazu101,00 € -
BS ISO 10094-1:2021 + Redline
Tracked Changes. Pneumatic fluid power. Electro-pneumatic pressure control valves Main characteristics to include in the supplier's literature
23.05.2022 - PDF - Englisch - BSI
mehr dazu326,00 € -
NBN ISO 16889:2022
Hydraulic fluid power ? Filters ? Multi-pass method for evaluating filtration performance of a filter element
10.05.2022 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN ISO 16889:2022
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element ISO 16889:2022
10.05.2022 - PDF - Englisch - NBN
mehr dazu163,00 € -
22/30444484 DC:2022
BS ISO 6953-1. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Part 1. Main characteristics to be included in literature from suppliers product-marking requirements
29.04.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
22/30444488 DC:2022
BS ISO 6953-2. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Part 2. Test methods to determine the main characteristics be included in literature from suppliers
29.04.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
22/30426288 DC:2022
BS ISO 5352. Hydraulic fluid power. Determining discharge flow rate and thermal losses of gas loaded accumulators
18.04.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
PR NF ISO 21287, E49-007PR (04/2022)
Transmissions pneumatiques - Vérins - Vérins compacts, série 1000 kPa (10 bar), alésages de 20 mm à 100 mm
01.04.2022 - Paper - Englisch, Französisch - AFNOR
mehr dazu64,50 € -
DIN ISO 15552:2022-04
Pneumatic fluid power - Cylinders with detachable mountings 1000 kPA (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions (ISO 15552:2018), Text in German and English
01.04.2022 - PDF - Englisch, Deutsch - DIN
mehr dazu92,62 € -
UNE-EN 13001-3-6:2018+A1:2022
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
30.03.2022 - PDF - Spanisch - AENOR
mehr dazu111,00 € -
UNE-EN 13001-3-6:2018+A1:2022
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
30.03.2022 - PDF - Englisch - AENOR
mehr dazu133,20 € -
NF ISO 16889, E48-685 (03/2022)
Transmissions hydrauliques - Filtres - Évaluation des performances par la méthode de filtration en circuit fermé
01.03.2022 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
UNE-EN IEC 60534-4:2022
Industrial-process control valves - Part 4: Inspection and routine testing (Endorsed by Asociación Española de Normalización in March of 2022.)
01.03.2022 - PDF - Englisch - AENOR
mehr dazu72,00 € -
22/30435838 DC:2022
BS ISO 21287. Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
17.02.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
BS EN IEC 60545:2021 + Redline
Tracked Changes. Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps
04.02.2022 - PDF - Englisch - BSI
mehr dazu454,00 € -
UNE-EN ISO 19879:2022
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
26.01.2022 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 19879:2022
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
26.01.2022 - PDF - Englisch - AENOR
mehr dazu88,80 € -
ASTM F2905/F2905M-22
Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
01.01.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM F2905/F2905M-22 + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
01.01.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
NF ISO 12151-3, E48-079-3 (01/2022)
Connections for hydraulic fluid power and general use - Hose fittings - Part 3 : Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
01.01.2022 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
NF ISO 10094-1, E49-088-1 (01/2022)
Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1 : main characteristics to include in the supplier's literature
01.01.2022 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
NF ISO 10094-2, E49-088-2 (01/2022)
Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 2 : Test methods to determine main characteristics to include in the supplier's literature
01.01.2022 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
BS ISO 12151-3:2021 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 6162-1 or 6162-2 flange ends
21.12.2021 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS ISO 23840:2021
Water hydraulics. Water-hydraulic pumps. Methods of testing and representing basic steady-state performance
01.12.2021 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 12151-3:2021
Connections for hydraulic fluid power and general use. Hose fittings with ISO 6162-1 or 6162-2 flange ends
29.11.2021 - PDF - Englisch - BSI
mehr dazu180,00 € -
BS ISO 10094-1:2021
Pneumatic fluid power. Electro-pneumatic pressure control valves Main characteristics to include in the supplier's literature
29.11.2021 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 10094-2:2021
Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics include in the supplier's literature
29.11.2021 - PDF - Englisch - BSI
mehr dazu293,00 € -
JIS B 8356-2:2021
Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 2: Filter elements -- Verification of fabrication integrity and determination of the first bubble point
22.11.2021 - PDF - Japanisch - JSA
mehr dazu28,99 € -
127,00 €
-
PR NF ISO 16028, E48-056PR (11/2021)
Transmissions hydrauliques - Raccords rapides de type à face plane pour usage à des pressions de 10 MPa (100 bar) à 31,5 MPa (315 bar) - Spécifications
01.11.2021 - Paper - Englisch, Französisch - AFNOR
mehr dazu62,60 € -
BS EN ISO 19879:2021 + Redline
Tracked Changes. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
21.10.2021 - PDF - Englisch - BSI
mehr dazu326,00 € -
66,00 €
-
87,00 €
-
BS ISO 11943:2021 + Redline
Tracked Changes. Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
04.10.2021 - PDF - Englisch - BSI
mehr dazu382,00 € -
PD ISO/TS 13725:2021 + Redline
Tracked Changes. Hydraulic fluid power. Method for evaluating the buckling load of a hydraulic cylinder
04.10.2021 - PDF - Englisch - BSI
mehr dazu326,00 € -
UNE-EN IEC 60545:2021
Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps (Endorsed by Asociación Española de Normalización in October of 2021.)
01.10.2021 - PDF - Englisch - AENOR
mehr dazu92,00 € -
XP ISO/TS 13725, E48-018 (10/2021)
Transmissions hydrauliques - Méthode d'évaluation de la charge de flambage d'un vérin hydraulique
01.10.2021 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
PD ISO/TS 13725:2021
Hydraulic fluid power. Method for evaluating the buckling load of a hydraulic cylinder
21.09.2021 - PDF - Englisch - BSI
mehr dazu250,00 € -
NBN ISO 11943:2021
Hydraulic fluid power ? Online automatic particle-counting systems for liquids ? Methods of calibration and validation
21.09.2021 - PDF - Französisch - NBN
mehr dazu142,00 € -
NBN ISO 11943:2021
Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation ISO 11943:2021
21.09.2021 - PDF - Englisch - NBN
mehr dazu142,00 € -
NF ISO 6195, E48-038 (09/2021)
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances
01.09.2021 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
NF ISO 11943, E48-682 (09/2021)
Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation - Transmissions hydrauliques - Systèmes de comptage automatique en ligne de particules en suspension dans les liquides - Méthodes d'étalonnage et de validation.
01.09.2021 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
BS EN 13001-3-6:2018+A1:2021
Cranes. General design Limit states and proof of competence machinery. Hydraulic cylinders
31.08.2021 - PDF - Englisch - BSI
mehr dazu348,00 € -
SAE J 1939/74:2021-08-26
Application - Configurable Messaging (Stabilized: Aug 2021)
26.08.2021 - PDF - Englisch - SAE
mehr dazu148,00 € -
BS EN IEC 60545:2021
Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps
19.08.2021 - PDF - Englisch - BSI
mehr dazu348,00 € -
SAE J 518/3:2021-08-12
Hydraulic Flange Clamps, Two-Screw Flange Connection to be Used with SAE J518-1 (Code 61) Connections Where Only Low Pressure is Required
12.08.2021 - PDF - Englisch - SAE
mehr dazu83,00 € -
NF EN IEC 60545, C55-045 (08/2021)
Lignes directrices pour la mise en service et l'exploitation des turbines hydrauliques, des pompes-turbines et des pompes d'accumulation
01.08.2021 - Paper - Französisch - AFNOR
mehr dazu141,33 € -
NF ISO 7425-2, E48-034-2 (08/2021)
Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 2 : rod seal housings - Transmissions hydrauliques - Logements pour joints en élastomère renforcé par des matières plastiques - Dimensions et tolérances - Partie 2 : Logements de joints de tige
01.08.2021 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
NF ISO 7425-1, E48-034-1 (08/2021)
Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 1 : piston seal housings - Transmissions hydrauliques - Logements pour joints en élastomère renforcé par des matières plastiques - Partie 1 : Logements de joints de piston
01.08.2021 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
BS ISO 6195:2021 + Redline
Tracked Changes. Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
28.07.2021 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 6195:2021
Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
07.07.2021 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN 20066:2021-07
Hydraulic fluid power - Hose assemblies - Dimensions, requirements
01.07.2021 - PDF - Deutsche - DIN
mehr dazu85,79 € -
NBN ISO 4406:2021
Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles ISO 4406:2021
24.06.2021 - PDF - Englisch - NBN
mehr dazu37,00 € -
IEC 60545:2021
IEC 60545:2021 Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps
23.06.2021 - PDF - Englisch, Französisch - IEC
mehr dazu311,00 € -
NBN EN 13001-3-6:2018+A1:2021
Krane - Konstruktion allgemein - Teil 3-6: Grenzzustände und Sicherheitsnachweis von Maschinenbauteilen - Hydraulikzylinder
18.06.2021 - PDF - Französisch - NBN
mehr dazu184,00 € -
NBN EN 13001-3-6:2018+A1:2021
Krane - Konstruktion allgemein - Teil 3-6: Grenzzustände und Sicherheitsnachweis von Maschinenbauteilen - Hydraulikzylinder
18.06.2021 - PDF - Deutsche - NBN
mehr dazu184,00 € -
NBN EN 13001-3-6:2018+A1:2021
Krane - Konstruktion allgemein - Teil 3-6: Grenzzustände und Sicherheitsnachweis von Maschinenbauteilen - Hydraulikzylinder
18.06.2021 - PDF - Englisch - NBN
mehr dazu184,00 € -
UNE-EN ISO 3949:2021
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12)
09.06.2021 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 3949:2021
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12)
09.06.2021 - PDF - Englisch - AENOR
mehr dazu81,60 € -
DIN EN ISO 19879:2021-06
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021), German version EN ISO 19879:2021
01.06.2021 - PDF - Deutsche - DIN
mehr dazu92,62 € -
PR NF ISO 16889, E48-685PR (06/2021)
Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filter element
01.06.2021 - Paper - Englisch, Französisch - AFNOR
mehr dazu122,88 € -
NBN ISO 23297:2021
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification ISO 23297:2017
28.05.2021 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN ISO 3862:2021
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification ISO 3862:2020
28.05.2021 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN ISO 11237:2021
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification ISO 11237:2017
27.05.2021 - PDF - Englisch - NBN
mehr dazu58,00 € -
BS ISO 11943:2021
Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
12.05.2021 - PDF - Englisch - BSI
mehr dazu293,00 € -
NBN ISO 1436:2021
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification ISO 1436:2020
12.05.2021 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN ISO 4079:2021
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification ISO 4079:2020
12.05.2021 - PDF - Englisch - NBN
mehr dazu89,00 € -
NBN ISO 23309:2021
Hydraulic fluid power systems ? Assembled systems ? Methods of cleaning lines by flushing
08.05.2021 - PDF - Französisch - NBN
mehr dazu89,00 € -
NBN ISO 23309:2021
Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing ISO 23309:2020
08.05.2021 - PDF - Englisch - NBN
mehr dazu89,00 € -
ASTM F2968/F2968M-21
Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
01.05.2021 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM F2968/F2968M-21 + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
01.05.2021 - PDF - Englisch - ASTM
mehr dazu72,00 € -
BS EN ISO 19879:2021
Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
12.04.2021 - PDF - Englisch - BSI
mehr dazu250,00 € -
NBN EN ISO 19879:2021
Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Prüfverfahren für hydraulische Rohrverschraubungen (ISO 19879:2021)
02.04.2021 - PDF - Französisch - NBN
mehr dazu142,00 € -
NBN EN ISO 19879:2021
Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Prüfverfahren für hydraulische Rohrverschraubungen (ISO 19879:2021)
02.04.2021 - PDF - Deutsche - NBN
mehr dazu142,00 € -
NBN EN ISO 19879:2021
Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Prüfverfahren für hydraulische Rohrverschraubungen (ISO 19879:2021)
02.04.2021 - PDF - Englisch - NBN
mehr dazu142,00 € -
NF EN ISO 19879, E48-075 (03/2021)
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
01.03.2021 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
DIN EN ISO 3949:2021-03
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12), German version EN ISO 3949:2020
01.03.2021 - PDF - Deutsche - DIN
mehr dazu79,72 € -
BS ISO 7425-1:2021
Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals Piston seal
26.02.2021 - PDF - Englisch - BSI
mehr dazu180,00 €