23 : Fluidsystemen und Komponenten für den allgemeinen Gebrauch ICS -Navigation

BS EN ISO 10297:2024

Gas cylinders. Cylinder valves. Specification and type testing
12.04.2024 - PDF - Englisch - BSI
mehr dazu

348,00 €

PAS 4443:2024

Assessment criteria: Ancillary valves, devices and components used in hydrogen gas installations. Specification
11.04.2024 - PDF - Englisch - BSI
mehr dazu

168,00 €

24/30453522 DC:2024

BS EN ISO 10286 Gas cylinders - Vocabulary
11.04.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

24/30488707 DC:2024

BS EN 13079 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
11.04.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

UNE-EN ISO 11363-1:2018/A1:2024

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10.04.2024 - PDF - Spanisch - AENOR
mehr dazu

34,00 €

UNE-EN ISO 11363-1:2018/A1:2024

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10.04.2024 - PDF - Englisch - AENOR
mehr dazu

40,80 €

BS EN ISO 4126-10:2024 + Redline

Tracked Changes. Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
10.04.2024 - PDF - Englisch - BSI
mehr dazu

492,00 €

UNE-EN ISO 10468:2024

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
10.04.2024 - PDF - Spanisch - AENOR
mehr dazu

63,00 €

UNE-EN ISO 10468:2024

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
10.04.2024 - PDF - Englisch - AENOR
mehr dazu

75,60 €

BS EN 12201-3:2024 + Redline

Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
10.04.2024 - PDF - Englisch - BSI
mehr dazu

432,00 €

BS EN ISO 4126-10:2024

Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
04.04.2024 - PDF - Englisch - BSI
mehr dazu

377,00 €

BS EN ISO 22435:2024

Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
04.04.2024 - PDF - Englisch - BSI
mehr dazu

293,00 €

UNE-EN ISO 5117:2024

Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
03.04.2024 - PDF - Spanisch - AENOR
mehr dazu

85,00 €

UNE-EN ISO 5117:2024

Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
03.04.2024 - PDF - Englisch - AENOR
mehr dazu

102,00 €

BS EN ISO 8233:2024 + Redline

Tracked Changes. Thermoplastics valves. Torque. Test method
03.04.2024 - PDF - Englisch - BSI
mehr dazu

197,00 €

UNE-EN ISO 11623:2024

Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
03.04.2024 - PDF - Spanisch - AENOR
mehr dazu

93,00 €

UNE-EN ISO 11623:2024

Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
03.04.2024 - PDF - Englisch - AENOR
mehr dazu

111,60 €

UNE-EN 12449:2024

Copper and copper alloys - Seamless, round tubes for general purposes
03.04.2024 - PDF - Spanisch - AENOR
mehr dazu

95,00 €

UNE-EN 12449:2024

Copper and copper alloys - Seamless, round tubes for general purposes
03.04.2024 - PDF - Englisch - AENOR
mehr dazu

114,00 €

BS ISO 10928:2024 + Redline

Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
03.04.2024 - PDF - Englisch - BSI
mehr dazu

326,00 €

DIN EN ISO 10497:2024-04

Testing of valves - Fire type-testing requirements (ISO 10497:2022), German version EN ISO 10497:2022
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

92,62 €

Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

163,74 €

DIN 21057-11:2024-04

Pipe classes for process plants - Part 11: Technical delivery conditions for pipe components of austenitic stainless steels of material group 8.1
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

158,04 €

DIN 21057-12:2024-04

Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

158,04 €

DIN CEN/TS 14632:2024-04

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity, German version CEN/TS 14632:2023
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

92,43 €

DIN 16262:2024-04

PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

39,35 €

DIN 35913:2024-04

Valves for drinking water installations in buildings - Level-controlled shut-off valves in drinking water installations - Requirements and tests
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

52,90 €

PR NF EN ISO 18984, T54-958PR (04/2024)

Robinets à tournant sphérique pour systèmes de canalisations en matières thermoplastiques pour installations d'eau chaude et froide sous pression - Types, dimensions et exigences
01.04.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu

88,50 €

DIN EN 17038-4:2024-04

Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units, German version EN 17038-4:2023
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

104,95 €

DIN EN ISO 11117:2024-04

Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019), German version EN ISO 11117:2019
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

85,79 €

DIN 16270:2024-04

PN 250 and PN 400 valves without test connection for pressure gauges
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

45,98 €

DIN 16271:2024-04

PN 250 and PN 400 valves with test connection for pressure gauges
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

45,98 €

DIN 4811-2:2024-04

Pressure regulators for LPG and safety devices - Part 2: Conformity assessement.
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

59,63 €

DIN EN 10378:2024-04

Welded stainless steel square and rectangular tubes for mechanical, engineering and decorative use - Technical delivery conditions, German and English version prEN 10378:2024
01.04.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

99,35 €

DIN 4811-1:2024-04

Pressure regulators for LPG and safety devices - Part 1: Requirements.
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

120,84 €

PR NF EN ISO 7866/A2, E29-743/A2PR (04/2024)

Bouteilles à gaz - Bouteilles à gaz sans soudure en alliage d'aluminium destinées à être rechargées - Conception, construction et essais - Amendement 2
01.04.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu

45,00 €

ASTM A333/A333M-24

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
01.04.2024 - PDF - Englisch - ASTM
mehr dazu

60,00 €

ASTM A333/A333M-24 + Redline

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
01.04.2024 - PDF - Englisch - ASTM
mehr dazu

71,00 €

ASTM A335/A335M-24

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
01.04.2024 - PDF - Englisch - ASTM
mehr dazu

66,00 €

ASTM A335/A335M-24 + Redline

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
01.04.2024 - PDF - Englisch - ASTM
mehr dazu

79,00 €

24/30483302 DC:2024

BS EN ISO 5801:2017/Amd 1 Fans - Performance testing using standardized airways. Amendment 1
01.04.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

PR NF EN 14511-2/A1, E38-116-2/A1PR (04/2024)

Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entraîné par moteur électrique - Partie 2 : Conditions d'essai
01.04.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu

45,00 €

PR NF EN 14511-3/A1, E38-116-3/A1PR (04/2024)

Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entraîné par moteur électrique - Partie 3 : Méthodes d'essai
01.04.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu

35,50 €

DIN EN ISO 7510:2024-04

Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017), German version EN ISO 7510:2024
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

59,63 €

DIN EN 16903:2024-04

Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16903:2024
01.04.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

104,95 €

DIN EN 13079:2024-04

Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D, German and English version prEN 13079:2024
01.04.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01.04.2024 - PDF - Englisch - ASTM
mehr dazu

60,00 €

ASTM F439-24 + Redline

Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01.04.2024 - PDF - Englisch - ASTM
mehr dazu

71,00 €

DIN 11864-2:2024-04

Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 2: Flange connections
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

110,00 €

DIN 3384-1:2024-04

Pipework - Part 1: Types of connection for corrugated stainless steel metal hose assemblies according to DIN EN 16617 for combustible gases.
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

79,72 €

DIN 3384-2:2024-04

Pipework - Part 2: Conformity assessment of connection for corrugated stainless steel metal hose assemblies according to DIN EN 16617 for combustible gases.
01.04.2024 - PDF - Deutsche - DIN
mehr dazu

59,63 €

24/30490581 DC:2024

BS EN IEC 60879 AMD 1 Comfort fans and regulators for household and similar purposes - Methods for measuring performance
29.03.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

24/30484766 DC:2024

BS EN 16903 Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
28.03.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

24/30488704 DC:2024

BS EN 16904 Plastics piping systems inside the building structure - Environmental product declarations. Product category rules complementary to EN 15804
28.03.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

UNE-EN 15001-2:2024

Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
27.03.2024 - PDF - Spanisch - AENOR
mehr dazu

74,00 €

UNE-EN 15001-2:2024

Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
27.03.2024 - PDF - Englisch - AENOR
mehr dazu

88,80 €

UNE-EN 17821:2024

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
27.03.2024 - PDF - Spanisch - AENOR
mehr dazu

70,00 €

UNE-EN 17821:2024

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
27.03.2024 - PDF - Englisch - AENOR
mehr dazu

84,00 €

24/30457738 DC:2024

BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
25.03.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

PAS 8855:2024

Vaping products and vaping devices. Quality, safety and performance. Specification
25.03.2024 - PDF - Englisch - BSI
mehr dazu

119,00 €

BS EN 12201-1:2024 + Redline

Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
22.03.2024 - PDF - Englisch - BSI
mehr dazu

382,00 €

BS ISO 16132:2024 + Redline

Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
22.03.2024 - PDF - Englisch - BSI
mehr dazu

326,00 €

BS ISO 10928:2024

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
22.03.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

BS EN 12201-2:2024 + Redline

Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
22.03.2024 - PDF - Englisch - BSI
mehr dazu

382,00 €

BS EN 12201-4:2024 + Redline

Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
21.03.2024 - PDF - Englisch - BSI
mehr dazu

326,00 €

UNE-EN 1401-1:2020+A1:2024

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
20.03.2024 - PDF - Spanisch - AENOR
mehr dazu

88,00 €

UNE-EN 1401-1:2020+A1:2024

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
20.03.2024 - PDF - Englisch - AENOR
mehr dazu

105,60 €

24/30479027 DC:2024

BS ISO 13348 Fans - Tolerances, methods of conversion and technical data presentation
18.03.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

BS EN ISO 8233:2024

Thermoplastics valves. Torque. Test method
15.03.2024 - PDF - Englisch - BSI
mehr dazu

151,00 €

BS EN 1594:2024 + Redline

Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
15.03.2024 - PDF - Englisch - BSI
mehr dazu

492,00 €

BS EN 12201-4:2024

Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
14.03.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

24/30443602 DC:2024

EN 1993-4-2 Eurocode 3. Design of steel structures. Part 4-2: Tanks
14.03.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

BS EN 12201-2:2024

Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
14.03.2024 - PDF - Englisch - BSI
mehr dazu

293,00 €

BS EN 12201-3:2024

Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
14.03.2024 - PDF - Englisch - BSI
mehr dazu

331,00 €

NBN EN ISO 8233:2024

Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai (ISO 8233:2024)
13.03.2024 - PDF - Französisch - NBN
mehr dazu

58,00 €

NBN EN ISO 8233:2024

Thermoplastics valves - Torque - Test method (ISO 8233:2024)
13.03.2024 - PDF - Englisch - NBN
mehr dazu

58,00 €

UNE 62425:2024

Construction of double-walled bottoms (non-inspectable base). in vertical axle air tanks manufactured in situ of single-walled steel
13.03.2024 - PDF - Spanisch - AENOR
mehr dazu

60,00 €

BS EN 12201-1:2024

Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
13.03.2024 - PDF - Englisch - BSI
mehr dazu

293,00 €

BS EN 17878-3:2024

District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for non bonded plastic service pipes
13.03.2024 - PDF - Englisch - BSI
mehr dazu

180,00 €

BS EN 17878-2:2024

District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for bonded plastic service pipes
13.03.2024 - PDF - Englisch - BSI
mehr dazu

180,00 €

UNE-EN 12309-1:2024

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
13.03.2024 - PDF - Spanisch - AENOR
mehr dazu

76,00 €

UNE-EN 12309-1:2024

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
13.03.2024 - PDF - Englisch - AENOR
mehr dazu

91,20 €

BS ISO 16132:2024

Ductile iron pipes and fittings. Seal coats for cement mortar linings
12.03.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

NBN ISO 3601-2:2024

Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 2: Dimensions des logements pour applications générales ISO 3601-2:2016
12.03.2024 - PDF - Französisch - NBN
mehr dazu

184,00 €

NBN ISO 3601-4:2024

Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) ISO 3601-4:2008
12.03.2024 - PDF - Englisch - NBN
mehr dazu

89,00 €

NBN ISO 3601-2:2024

Fluid power systems — O-rings — Part 2: Housing dimensions for general applications ISO 3601-2:2016
12.03.2024 - PDF - Englisch - NBN
mehr dazu

184,00 €

BS EN 1594:2024

Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
11.03.2024 - PDF - Englisch - BSI
mehr dazu

377,00 €

BS EN 17878-1:2024

District heating pipes. Factory made flexible pipe systems with a lower temperature profile Classification, general requirements and test methods
08.03.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

24/30476059 DC:2024

BS EN ISO 21036 Plastics piping systems for industrial applications -Unplasticized Polyamide (PA-U) - Metric series for specifications for components and system
07.03.2024 - PDF - Englisch - BSI
mehr dazu

District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods
06.03.2024 - PDF - Englisch - NBN
mehr dazu

142,00 €

UNE-EN ISO 5774:2024

Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
06.03.2024 - PDF - Spanisch - AENOR
mehr dazu

68,00 €

UNE-EN ISO 5774:2024

Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
06.03.2024 - PDF - Englisch - AENOR
mehr dazu

81,60 €

BS EN IEC 63086-2-1:2024

Household and similar electrical air cleaning appliances. Methods for measuring the performance Particular requirements determination of particle reduction
05.03.2024 - PDF - Englisch - BSI
mehr dazu

293,00 €

NF EN ISO 8233, T54-083 (03/2024)

Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai
01.03.2024 - Paper - Französisch - AFNOR
mehr dazu

43,50 €

DIN CEN/TS 1455-2:2024-03

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023.
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

68,60 €

DIN EN 19:2024-03

Industrial valves - Marking of metallic valves, German version EN 19:2023
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

72,80 €

DIN 3630:2024-03

Shut-off valves, check valves, air supply/exhaust valves and control valves made of metallic materials for potable water supply systems - Requirements and test methods
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

52,90 €

DIN EN 13476-1:2024-03

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics, German and English version prEN 13476-1:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

92,62 €

DIN EN 13476-2:2024-03

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A, German and English version prEN 13476-2:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

131,96 €

DIN EN 13476-3:2024-03

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B, German and English version prEN 13476-3:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

131,96 €

DIN EN 1705:2024-03

Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow, German and English version prEN 1705:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

59,63 €

DIN CEN/TS 13598-3:2024-03

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity, German version CEN/TS 13598-3:2021.
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

88,04 €

DIN 16261:2024-03

PN 16 cocks with female/female and female/male connection for pressure gauges
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

39,35 €

DIN EN ISO 18984:2024-03

Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024), German and English version prEN ISO 18984:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

92,62 €

NF EN 17878-1, E39-021-1 (03/2024)

Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 1 : classification, exigences générales et méthodes d'essai
01.03.2024 - Paper - Französisch - AFNOR
mehr dazu

93,50 €

NF EN 17878-3, E39-021-3 (03/2024)

Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 3 : exigences et méthodes d'essai pour les systèmes non bloqués avec tubes de service en plastique
01.03.2024 - Paper - Französisch - AFNOR
mehr dazu

68,50 €

NF EN 17878-2, E39-021-2 (03/2024)

Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 2 : exigences et méthodes d'essai pour les systèmes bloqués avec tubes de service en plastique
01.03.2024 - Paper - Französisch - AFNOR
mehr dazu

68,50 €

DIN EN 13445-4:2024-03

Unfired pressure vessels - Part 4: Fabrication, German version EN 13445-4:2021+A1:2023
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

152,71 €

ASTM A179/A179M-24

Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

52,00 €

ASTM A179/A179M-24 + Redline

Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

63,00 €

ASTM A270/A270M-24

Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

60,00 €

ASTM A270/A270M-24 + Redline

Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

71,00 €

ASTM A312/A312M-24

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

66,00 €

ASTM A312/A312M-24 + Redline

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

79,00 €

ASTM A369/A369M-24

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

60,00 €

ASTM A369/A369M-24 + Redline

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

71,00 €

ASTM A53/A53M-24

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

86,00 €

ASTM A53/A53M-24 + Redline

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
01.03.2024 - PDF - Englisch - ASTM
mehr dazu

103,00 €

ASTM A790/A790M-24

71,00 €

DIN EN 12583/A1:2024-03

Gas Infrastructure - Compressor stations - Functional requirements, German and English version EN 12583:2022/prA1:2024
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

39,35 €

DIN CEN/TS 1566-2:2024-03

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023.
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

68,60 €

DIN EN 17670-2:2024-03

Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies, German version EN 17670-2:2023
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

126,26 €

DIN CEN/TS 1329-2:2024-03

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1329-2:2021
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

BOLT, CLUSTER FITTING, DOUBLE PORT FLARELESS
01.03.2024 - PDF - Englisch - SAE
mehr dazu

54,00 €

VG 95922-7:2024-03

Hose assemblies - Part 7: Hose assemblies for fluid power service, air conditioning section, detail standard, Text in German and English
01.03.2024 - PDF - Englisch, Deutsch - DIN
mehr dazu

110,00 €

DIN EN 751-3:2024-03

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings, German version EN 751-3:2022+A1:2023.
01.03.2024 - PDF - Deutsche - DIN
mehr dazu

85,79 €

NBN ISO 16494-1:2022/Amd 1:2024

Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance — Amendment 1 ISO 16494-1:2022/Amd 1:2023
29.02.2024 - PDF - Englisch - NBN
mehr dazu

20,00 €

ASTM C1924-24

Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
29.02.2024 - PDF - Englisch - ASTM
mehr dazu

66,00 €

ASTM C1924-24 + Redline

Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
29.02.2024 - PDF - Englisch - ASTM
mehr dazu

79,00 €

UNE-EN IEC 60335-2-40:2024

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28.02.2024 - PDF - Spanisch - AENOR
mehr dazu

155,00 €

UNE-EN IEC 60335-2-40:2024

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28.02.2024 - PDF - Englisch - AENOR
mehr dazu

186,00 €

UNE-EN IEC 60335-2-40:2024/A11:2024

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28.02.2024 - PDF - Spanisch - AENOR
mehr dazu

68,00 €

UNE-EN IEC 60335-2-40:2024/A11:2024

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28.02.2024 - PDF - Englisch - AENOR
mehr dazu

81,60 €

24/30457735 DC:2024

BS ISO 21013-2 Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
27.02.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

PD CEN/TR 17996:2024

Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
26.02.2024 - PDF - Englisch - BSI
mehr dazu

348,00 €

BS ISO 4437-2:2024 + Redline

Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
26.02.2024 - PDF - Englisch - BSI
mehr dazu

326,00 €

BS ISO 4437-5:2024 + Redline

Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
26.02.2024 - PDF - Englisch - BSI
mehr dazu

326,00 €

BS ISO 4437-3:2024 + Redline

Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
26.02.2024 - PDF - Englisch - BSI
mehr dazu

382,00 €

BS EN ISO 7510:2024

Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
22.02.2024 - PDF - Englisch - BSI
mehr dazu

151,00 €

CEN/TR 17996:2024

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation
21.02.2024 - PDF - Englisch - NBN
mehr dazu

184,00 €

BS ISO 4437-2:2024

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
21.02.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

BS ISO 4437-3:2024

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
21.02.2024 - PDF - Englisch - BSI
mehr dazu

293,00 €

BS ISO 4437-5:2024

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
21.02.2024 - PDF - Englisch - BSI
mehr dazu

250,00 €

UNE-EN 549:2020+A1:2024

Rubber materials for seals and diaphragms for gas appliances and gas equipment
21.02.2024 - PDF - Spanisch - AENOR
mehr dazu

74,00 €

UNE-EN 549:2020+A1:2024

Rubber materials for seals and diaphragms for gas appliances and gas equipment
21.02.2024 - PDF - Englisch - AENOR
mehr dazu

88,80 €

SAE J 530:2024-02-16

Automotive Pipe Fittings
16.02.2024 - PDF - Englisch - SAE
mehr dazu

105,00 €

24/30481210 DC:2024

BS EN 13476-1 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 1: General requirements performance characteristics
15.02.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

24/30481213 DC:2024

BS EN 13476-2 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2: Specifications pipes fittings with smooth internal external surface the system, Type A
15.02.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €

24/30481216 DC:2024

BS EN 13476-3 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 3: Specifications pipes fittings with smooth internal profiled external surface the system, Type B
15.02.2024 - PDF - Englisch - BSI
mehr dazu

24,00 €