17.200.10 : Heat. Kalorimetrie
-
ASTM C1130-24
Standard Practice for Calibration of Thin Heat Flux Transducers
15.03.2024 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM C1130-24 + Redline
Standard Practice for Calibration of Thin Heat Flux Transducers
15.03.2024 - PDF - Englisch - ASTM
mehr dazu71,00 € -
ASTM E2781-24
Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
15.03.2024 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM E2781-24 + Redline
Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
15.03.2024 - PDF - Englisch - ASTM
mehr dazu63,00 € -
ASTM C1044-24
Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
01.03.2024 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM C1044-24 + Redline
Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
01.03.2024 - PDF - Englisch - ASTM
mehr dazu71,00 € -
ASTM C1043-24
Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
01.03.2024 - PDF - Englisch - ASTM
mehr dazu66,00 € -
ASTM C1043-24 + Redline
Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
01.03.2024 - PDF - Englisch - ASTM
mehr dazu79,00 € -
BS EN 1434-2:2022 + Redline
Tracked Changes. Thermal energy meters Constructional requirements
15.10.2023 - PDF - Englisch - BSI
mehr dazu432,00 € -
ASTM E473-23b
Standard Terminology Relating to Thermal Analysis and Rheology
01.10.2023 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM E473-23b + Redline
Standard Terminology Relating to Thermal Analysis and Rheology
01.10.2023 - PDF - Englisch - ASTM
mehr dazu63,00 € -
ASTM E2070-23
Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
01.10.2023 - PDF - Englisch - ASTM
mehr dazu66,00 € -
ASTM E2070-23 + Redline
Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
01.10.2023 - PDF - Englisch - ASTM
mehr dazu79,00 € -
ASTM E1142-23b
Standard Terminology Relating to Thermophysical Properties
01.10.2023 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM E1142-23b + Redline
Standard Terminology Relating to Thermophysical Properties
01.10.2023 - PDF - Englisch - ASTM
mehr dazu71,00 € -
PR NF EN 1434-3, E17-401-3PR (10/2023)
Compteurs d'énergie thermique - Partie 3 : échange de données et interfaces
01.10.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu80,50 € -
DIN EN 1434-3:2023-09
Thermal energy meters - Part 3: Data exchange and interfaces, German and English version prEN 1434-3:2023
01.09.2023 - PDF - Englisch, Deutsch - DIN
mehr dazu79,72 € -
23/30466787 DC:2023
BS EN 1434-3. Thermal energy meters Part 3. Data exchange and interfaces
17.08.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
ASTM E2041-23
Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
01.08.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E2041-23 + Redline
Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
01.08.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
ASTM C1702-23
Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
01.08.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM C1702-23 + Redline
Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
01.08.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
DIN 51007-1:2023-07
Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles
01.07.2023 - PDF - Deutsche - DIN
mehr dazu85,79 € -
ASTM E1952-23
Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
01.06.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E1952-23 + Redline
Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
01.06.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
ASTM E1354-23
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
01.03.2023 - PDF - Englisch - ASTM
mehr dazu78,00 € -
ASTM E1354-23 + Redline
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
01.03.2023 - PDF - Englisch - ASTM
mehr dazu93,00 € -
ASTM E2716-23
Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
01.01.2023 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM E2716-23 + Redline
Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
01.01.2023 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E2009-23
Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
01.01.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E2009-23 + Redline
Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
01.01.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
ASTM E1970-23
Standard Practice for Statistical Treatment of Thermoanalytical Data
01.01.2023 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E1970-23 + Redline
Standard Practice for Statistical Treatment of Thermoanalytical Data
01.01.2023 - PDF - Englisch - ASTM
mehr dazu65,00 € -
331,00 €
-
NF EN 1434-4, E17-401-4 (09/2022)
Compteurs d'énergie thermique - Partie 4 : essais en vue de l'approbation de modèle
01.09.2022 - Paper - Französisch - AFNOR
mehr dazu154,67 € -
NF EN 1434-1, E17-401-1 (09/2022)
Compteurs d'énergie thermique - Partie 1 : prescriptions générales
01.09.2022 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
NF EN 1434-2, E17-401-2 (09/2022)
Compteurs d'énergie thermique - Partie 2 : prescriptions de fabrication
01.09.2022 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
NF EN 1434-5, E17-401-5 (09/2022)
Compteurs d'énergie thermique - Partie 5 : essais de vérification primitive
01.09.2022 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
NF EN 1434-6, E17-401-6 (09/2022)
Compteurs d'énergie thermique - Partie 6 : installation, mise en service, surveillance et maintenance
01.09.2022 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
ASTM E637-22
Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
01.08.2022 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E637-22 + Redline
Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
01.08.2022 - PDF - Englisch - ASTM
mehr dazu68,00 € -
BS EN 12697-13:2017
Bituminous mixtures. Test methods Temperature measurement
25.07.2022 - PDF - Englisch - BSI
mehr dazu151,00 € -
ASTM E1782-22
Standard Test Method for Determining Vapor Pressure by Thermal Analysis
01.07.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E1782-22 + Redline
Standard Test Method for Determining Vapor Pressure by Thermal Analysis
01.07.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM F3340-22
Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
15.06.2022 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM F3340-22 + Redline
Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
15.06.2022 - PDF - Englisch - ASTM
mehr dazu68,00 € -
ASTM E3174-22
Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
01.06.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E3174-22 + Redline
Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
01.06.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E1981-22
Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
01.06.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E1981-22 + Redline
Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
01.06.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E459-22
Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
01.04.2022 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM E459-22 + Redline
Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
01.04.2022 - PDF - Englisch - ASTM
mehr dazu72,00 € -
ASTM E422-22
Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
01.04.2022 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E422-22 + Redline
Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
01.04.2022 - PDF - Englisch - ASTM
mehr dazu65,00 € -
ASTM E2602-22
Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
01.02.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2602-22 + Redline
Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
01.02.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E2890-21
Standard Test Method for Determination of Kinetic Parameters and Reaction Order for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger and Farjas Methods
01.10.2021 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E2890-21 + Redline
Standard Test Method for Determination of Kinetic Parameters and Reaction Order for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger and Farjas Methods
01.10.2021 - PDF - Englisch - ASTM
mehr dazu68,00 € -
DIN 51007-2:2021-10
Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC), Chip calorimetry
01.10.2021 - PDF - Deutsche - DIN
mehr dazu104,95 € -
ASTM E2253-21
Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
01.07.2021 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2253-21 + Redline
Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
01.07.2021 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM D7314-21
Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
01.04.2021 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM D7314-21 + Redline
Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
01.04.2021 - PDF - Englisch - ASTM
mehr dazu61,00 € -
PD CEN/TR 13582:2021
Installation of thermal energy meters. Guidelines for the selection, installation and operation of thermal energy meters
04.02.2021 - PDF - Englisch - BSI
mehr dazu348,00 € -
CEN/TR 13582:2021
Installation of thermal energy meters - Guidelines for the selection, installation and operation of thermal energy meters
30.01.2021 - PDF - Englisch - NBN
mehr dazu184,00 € -
DIN SPEC 91420:2020-11
Dynamic in-door measuring method for thermal radiation and calorimetric measurements of climate related thermal boundary conditions of a cubic reference building
01.11.2020 - PDF - Deutsche - DIN
mehr dazu0,00 € -
ASTM E1225-20
Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
01.09.2020 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E1225-20 + Redline
Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
01.09.2020 - PDF - Englisch - ASTM
mehr dazu61,00 € -
VDI 2878 Blatt 1:2020-08
Anwendung der Thermografie zur Diagnose in der Instandhaltung - Allgemeine Anforderungen sowie Hinweise für Entscheidungsträger und Verantwortliche
01.08.2020 - PDF - Englisch, Deutsch - VDI
mehr dazu82,13 € -
ASTM E2584-20
Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
01.05.2020 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E2584-20 + Redline
Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
01.05.2020 - PDF - Englisch - ASTM
mehr dazu68,00 € -
ASTM C1784-20
Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
01.04.2020 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM C1784-20 + Redline
Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
01.04.2020 - PDF - Englisch - ASTM
mehr dazu68,00 € -
BS EN 1434-3:2015 + Redline
Tracked Changes. Heat meters Data exchange and interfaces
26.02.2020 - PDF - Englisch - BSI
mehr dazu382,00 € -
DIN 12799:2019-12
Laboratory glassware - solid stem general purpose thermometers
01.12.2019 - PDF - Deutsche - DIN
mehr dazu39,35 € -
ASTM E1824-19
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
01.09.2019 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM E1824-19 + Redline
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
01.09.2019 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM E2069-19
Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
01.09.2019 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2069-19 + Redline
Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
01.09.2019 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E3057-19
Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
01.06.2019 - PDF - Englisch - ASTM
mehr dazu74,00 € -
ASTM E3057-19 + Redline
Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
01.06.2019 - PDF - Englisch - ASTM
mehr dazu87,00 € -
ASTM E928-19
Standard Test Method for Purity by Differential Scanning Calorimetry
01.05.2019 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E928-19 + Redline
Standard Test Method for Purity by Differential Scanning Calorimetry
01.05.2019 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM C1045-19
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
01.04.2019 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM C1045-19 + Redline
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
01.04.2019 - PDF - Englisch - ASTM
mehr dazu68,00 € -
DIN 51007:2019-04
Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
01.04.2019 - PDF - Deutsche - DIN
mehr dazu92,62 € -
ASTM E1530-19
Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique
01.02.2019 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E1530-19 + Redline
Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique
01.02.2019 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM C177-19e1
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
01.01.2019 - PDF - Englisch - ASTM
mehr dazu78,00 € -
ASTM C177-19e1 + Redline
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
01.01.2019 - PDF - Englisch - ASTM
mehr dazu93,00 € -
UNE-EN 12697-13:2018
Bituminous mixtures - Test methods - Part 13: Temperature measurement
19.12.2018 - PDF - Spanisch - AENOR
mehr dazu49,00 € -
UNE-EN 12697-13:2018
Bituminous mixtures - Test methods - Part 13: Temperature measurement
19.12.2018 - PDF - Englisch - AENOR
mehr dazu58,80 € -
74,00 €
-
87,00 €
-
ASTM E967-18
Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
15.03.2018 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E967-18 + Redline
Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
15.03.2018 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E2683-17
Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
01.09.2017 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2683-17 + Redline
Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
01.09.2017 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E2684-17
Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
01.09.2017 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2684-17 + Redline
Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
01.09.2017 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM F1720-17(2023)
Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
01.09.2017 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM F1720-17(2023) + Redline
Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
01.09.2017 - PDF - Englisch - ASTM
mehr dazu72,00 € -
52,91 €
-
ASTM C1171-16(2022)
Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
01.11.2016 - PDF - Englisch - ASTM
mehr dazu46,00 € -
VDI 2878 Blatt 4:2016-05
Anwendung der Thermografie zur Diagnose in der Instandhaltung - Gerätetechnik
01.05.2016 - PDF - Englisch, Deutsch - VDI
mehr dazu115,75 € -
DIN EN 1434-3:2016-02
Wärmezähler - Teil 3: Datenaustausch und Schnittstellen, Deutsche Fassung EN 1434-3:2015
01.02.2016 - PDF - Deutsche - DIN
mehr dazu104,95 € -
131,40 €
-
NF EN 1434-3, E17-401-3 (01/2016)
Wärmezähler - Teil 3 : Datenaustausch und Schnittstellen
01.01.2016 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
ASTM C1171-16(2022) + Redline
Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
01.01.2016 - PDF - Englisch - ASTM
mehr dazu53,00 € -
293,00 €
-
NBN EN 1434-3:2015
Wärmezähler - Teil 3: Datenaustausch und Schnittstellen
24.12.2015 - PDF - Französisch - NBN
mehr dazu142,00 € -
142,00 €
-
142,00 €
-
VDI/VDE 2878 Blatt 2:2015-05
Anwendung der Thermografie zur Diagnose in der Instandhaltung - Elektroanlagen
01.05.2015 - PDF - Englisch, Deutsch - VDI
mehr dazu139,13 € -
VDI 2878 Blatt 3:2015-05
Anwendung der Thermografie zur Diagnose in der Instandhaltung - Maschinen- und Anlagentechnik
01.05.2015 - PDF - Englisch, Deutsch - VDI
mehr dazu134,50 € -
ASTM E2603-15(2023)
Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
01.05.2015 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E2603-15(2023) + Redline
Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
01.05.2015 - PDF - Englisch - ASTM
mehr dazu65,00 € -
JIS H 7851:2015
Test method of cyclic heating for thermal-barrier coatings under temperature gradient
20.03.2015 - PDF - Japanisch - JSA
mehr dazu32,50 € -
ASTM C1371-15(2022)
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
01.03.2015 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM C1371-15(2022) + Redline
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
01.03.2015 - PDF - Englisch - ASTM
mehr dazu61,00 € -
FD E39-007 (08/2014)
Fernwärme - Messung der Wärme- und Kühlungsenergie - Wahl-, Einbau- und Betriebsleitfaden
01.08.2014 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
ASTM E144-14(2020)
Standard Practice for Safe Use of Oxygen Combustion Vessels
01.01.2014 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM E144-14(2020) + Redline
Standard Practice for Safe Use of Oxygen Combustion Vessels
01.01.2014 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM E1862-14(2022)
Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
01.01.2014 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM E1862-14(2022) + Redline
Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
01.01.2014 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E1897-14(2022)
Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
01.01.2014 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM E1897-14(2022) + Redline
Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
01.01.2014 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E1933-14(2022)
Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
01.01.2014 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM E1933-14(2022) + Redline
Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
01.01.2014 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E1461-13(2022)
Standard Test Method for Thermal Diffusivity by the Flash Method
01.09.2013 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E1461-13(2022) + Redline
Standard Test Method for Thermal Diffusivity by the Flash Method
01.09.2013 - PDF - Englisch - ASTM
mehr dazu68,00 € -
ASTM E1269-11(2018)
Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
01.04.2011 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E1269-11(2018) + Redline
Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
01.04.2011 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM F2625-10(2016)
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
01.01.2010 - PDF - Englisch - ASTM
mehr dazu48,00 € -
ASTM F2625-10(2016) + Redline
Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
01.01.2010 - PDF - Englisch - ASTM
mehr dazu57,00 € -
DIN 51045-2:2009-04
Bestimmung der thermischen Längenänderung fester Körper - Teil 2: Prüfung gebrannter feinkeramischer Werkstoffe nach dem Dilatometerverfahren
01.04.2009 - PDF - Deutsche - DIN
mehr dazu39,35 € -
DIN 51045-3:2009-04
Bestimmung der thermischen Längenänderung fester Körper - Teil 3: Prüfung ungebrannter feinkeramischer Werkstoffe nach dem Dilatometerverfahren
01.04.2009 - PDF - Deutsche - DIN
mehr dazu45,98 € -
ASTM E2585-09(2022)
Standard Practice for Thermal Diffusivity by the Flash Method
01.01.2009 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2585-09(2022) + Redline
Standard Practice for Thermal Diffusivity by the Flash Method
01.01.2009 - PDF - Englisch - ASTM
mehr dazu61,00 € -
0,00 €
-
ASTM E341-08(2020)
Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
01.01.2008 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E341-08(2020) + Redline
Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
01.01.2008 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM E457-08(2020)
Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
01.01.2008 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E457-08(2020) + Redline
Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
01.01.2008 - PDF - Englisch - ASTM
mehr dazu61,00 € -
51,00 €
-
61,00 €
-
ASTM E598-08(2020)
Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
01.01.2008 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E598-08(2020) + Redline
Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
01.01.2008 - PDF - Englisch - ASTM
mehr dazu61,00 € -
DIN 51045-4:2007-01
Bestimmung der Längenänderung fester Körper unter Wärmeeinwirkung nach dem Dilatometerverfahren - Teil 4: Prüfung gebrannter grobkeramischer Werkstoffe
01.01.2007 - PDF - Deutsche - DIN
mehr dazu39,35 € -
DIN 51045-5:2007-01
Bestimmung der Längenänderung fester Körper unter Wärmeeinwirkung nach dem Dilatometerverfahren - Teil 5: Prüfung ungebrannter grobkeramischer Werkstoffe
01.01.2007 - PDF - Deutsche - DIN
mehr dazu39,35 € -
ASTM E511-07(2020)
Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
01.01.2007 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E511-07(2020) + Redline
Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
01.01.2007 - PDF - Englisch - ASTM
mehr dazu68,00 € -
25,00 €
-
ASTM E793-06(2018)
Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
01.01.2006 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM E793-06(2018) + Redline
Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
01.01.2006 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM E794-06(2018)
Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
01.01.2006 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM E794-06(2018) + Redline
Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
01.01.2006 - PDF - Englisch - ASTM
mehr dazu53,00 € -
ASTM C1114-06(2019)
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
01.01.2006 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM C1114-06(2019) + Redline
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
01.01.2006 - PDF - Englisch - ASTM
mehr dazu61,00 € -
0,00 €
-
DIN 51045-1:2005-08
Bestimmung der thermischen Längenänderung fester Körper - Teil 1: Grundlagen
01.08.2005 - PDF - Deutsche - DIN
mehr dazu65,89 € -
DIN EN 13741:2004-05
Wärmetechnische Abnahmeprüfungen an zwangsbelüfteten standardisierten Nasskühltürmen, Deutsche Fassung EN 13741:2003
01.05.2004 - PDF - Deutsche - DIN
mehr dazu92,62 € -
DIN EN 13741:2004-05
Wärmetechnische Abnahmeprüfungen an zwangsbelüfteten standardisierten Nasskühltürmen
01.05.2004 - PDF - Englisch - DIN
mehr dazu115,98 € -
46,02 €
-
DIN EN ISO 9831:2004-02
Futtermittel, tierische Produkte und Kot oder Urin - Bestimmung des effektiven Brennwerts - Verfahren mit der kalorimetrischen Bombe (ISO 9831:1998), Deutsche Fassung EN ISO 9831:2003
01.02.2004 - PDF - Deutsche - DIN
mehr dazu92,62 € -
DIN EN ISO 9831:2004-02
Futtermittel, tierische Produkte und Kot oder Urin - Bestimmung des effektiven Brennwerts - Verfahren mit der kalorimetrischen Bombe (ISO 9831:1998)
01.02.2004 - PDF - Englisch - DIN
mehr dazu115,98 € -
NBN EN 13741:2004
Wärmetechnische Abnahmeprüfung an zwangsbelüfteten standardisierten Nasskühltürmen
15.01.2004 - PDF - Französisch - NBN
mehr dazu142,00 € -
NBN EN 13741:2004
Wärmetechnische Abnahmeprüfung an zwangsbelüfteten standardisierten Nasskühltürmen
15.01.2004 - PDF - Deutsche - NBN
mehr dazu142,00 € -
NBN EN 13741:2004
Wärmetechnische Abnahmeprüfung an zwangsbelüfteten standardisierten Nasskühltürmen
15.01.2004 - PDF - Englisch - NBN
mehr dazu142,00 € -
NBN EN ISO 9831:2004
Futtermittel, tierische Produkte und Kot oder Urin - Bestimmung des effektiven Brennwerts - Verfahren mit der kalorimetrischen Bombe (ISO 9831:1998)
24.12.2003 - PDF - Französisch - NBN
mehr dazu121,00 € -
NBN EN ISO 9831:2004
Futtermittel, tierische Produkte und Kot oder Urin - Bestimmung des effektiven Brennwerts - Verfahren mit der kalorimetrischen Bombe (ISO 9831:1998)
24.12.2003 - PDF - Deutsche - NBN
mehr dazu121,00 € -
NBN EN ISO 9831:2004
Futtermittel, tierische Produkte und Kot oder Urin - Bestimmung des effektiven Brennwerts - Verfahren mit der kalorimetrischen Bombe (ISO 9831:1998)
24.12.2003 - PDF - Englisch - NBN
mehr dazu121,00 € -
BS EN 13741:2003
Thermal performance acceptance testing of mechanical draught series wet cooling towers
22.12.2003 - PDF - Englisch - BSI
mehr dazu293,00 € -
NBN EN 12697-13:2001
Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
14.12.2000 - PDF - Englisch - NBN
mehr dazu37,00 € -
36,27 €
-
ASTM D6011-96(2022)
Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
01.01.1996 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM D6011-96(2022) + Redline
Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
01.01.1996 - PDF - Englisch - ASTM
mehr dazu61,00 € -
JIS G 0702:1995 (R2015)
Method of heat balance for continuous reheating furnace for steel
01.03.1995 - PDF - Japanisch - JSA
mehr dazu32,50 € -
25,00 €
-
25,00 €
-
ASTM D1826-94(2017)
Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
01.01.1994 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM D1826-94(2017) + Redline
Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
01.01.1994 - PDF - Englisch - ASTM
mehr dazu61,00 € -
25,00 €
-
25,00 €
-
JIS R 0301:1991 (R2016)
Heat balancing of pottery and refractory firing tunnel kiln
01.10.1991 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS R 0302:1991 (R2016)
Heat balancing of pottery and refractory firing periodic kiln
01.10.1991 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS R 0304:1991 (R2016)
Heat balancing of continuous dryer for ores and other materials
01.10.1991 - PDF - Japanisch - JSA
mehr dazu25,00 € -
25,00 €
-
25,00 €
-
32,34 €
-
32,34 €
-
25,00 €
-
Adjunct to C177 Test Method for Steady-State Heat Flux Measurements and Thermal
Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
20.04.2024 - PDF - Englisch - ASTM
mehr dazu82,85 € -
85,25 €
-
98,45 €