17.020 : Messtechnik und Messungen im Allgemeinen
-
ASTM E2254-24
Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
15.03.2024 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM E2254-24 + Redline
Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
15.03.2024 - PDF - Englisch - ASTM
mehr dazu63,00 € -
24/30486122 DC:2024
BS EN IEC 62828-1. Reference conditions and procedures for testing industrial process measurement transmitters Part 1. General all types of
08.03.2024 - PDF - Englisch - BSI
mehr dazu24,00 € -
ISO/IEC GUIDE 98-1:2024
ISO/IEC GUIDE 98-1:2024 Guide to the expression of uncertainty in measurement - Part 1: Introduction
12.02.2024 - PDF - Englisch - ISOIEC
mehr dazu100,00 € -
BS ISO 33401:2024
Reference materials. Contents of certificates, labels and accompanying documentation
22.01.2024 - PDF - Englisch - BSI
mehr dazu180,00 € -
PR NF ISO 11843-7, X06-048-7PR (01/2024)
Capacité de détection - Partie 7 : méthodologie basée sur les propriétés stochastiques du bruit instrumental
01.01.2024 - Paper - Englisch, Französisch - AFNOR
mehr dazu88,50 € -
ASTM D6027/D6027M-24
Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes
01.01.2024 - PDF - Englisch - ASTM
mehr dazu60,00 € -
ASTM D6027/D6027M-24 + Redline
Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes
01.01.2024 - PDF - Englisch - ASTM
mehr dazu71,00 € -
23/30439405 DC:2023
BS 6739. Instrumentation in process control systems: installation design and practice. Code of practice
08.12.2023 - PDF - Englisch - BSI
mehr dazu79,00 € -
NF EN 14662-1, X43-029-1 (12/2023)
Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 1 : prélèvement par pompage suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
01.12.2023 - Paper - Französisch - AFNOR
mehr dazu131,00 € -
NBN ISO 5725-1:2023
Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 1: Principes généraux et définitions ISO 5725-1:2023
13.11.2023 - PDF - Französisch - NBN
mehr dazu121,00 € -
NBN ISO 5725-1:2023
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions ISO 5725-1:2023
13.11.2023 - PDF - Englisch - NBN
mehr dazu121,00 € -
FD X07-025 (11/2023)
Métrologie - Programmes techniques minimaux de vérification métrologique des équipements de mesure - Règles générales et application aux domaines Électricité et Fréquence
01.11.2023 - Paper - Französisch - AFNOR
mehr dazu206,00 € -
23/30461121 DC:2023
BS ISO 11843-7. Capability of detection Part 7. Methodology based on stochastic properties instrumental noise
30.10.2023 - PDF - Englisch - BSI
mehr dazu24,00 € -
PD IEC GUIDE 115:2023 + Redline
Tracked Changes. Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector
05.10.2023 - PDF - Englisch - BSI
mehr dazu326,00 € -
NBN ISO 5725-3:2023
Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 3: Fidélité intermédiaire et plans alternatifs pour les études collaboratives ISO 5725-3:2023
03.10.2023 - PDF - Französisch - NBN
mehr dazu184,00 € -
NBN ISO 5725-3:2023
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies ISO 5725-3:2023
03.10.2023 - PDF - Englisch - NBN
mehr dazu184,00 € -
PD IEC GUIDE 115:2023
Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector
27.09.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
ISO/IEC Guide 98-3:2008/Suppl 1:2023
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) — Supplement 1: Propagation of distributions using a Monte Carlo method ISO/IEC Guide 98-3:2008/Suppl 1:2008
26.09.2023 - PDF - Englisch - NBN
mehr dazu205,00 € -
69,00 €
-
82,80 €
-
ASTM F2537-23
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
01.09.2023 - PDF - Englisch - ASTM
mehr dazu52,00 € -
ASTM F2537-23 + Redline
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
01.09.2023 - PDF - Englisch - ASTM
mehr dazu63,00 € -
NF ISO 5725-3, X06-041-3 (08/2023)
Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 3 : fidélité intermédiaire et plans alternatifs pour les études collaboratives
01.08.2023 - Paper - Französisch - AFNOR
mehr dazu130,67 € -
NF ISO 5725-1, X06-041-1 (08/2023)
Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 1 : principes généraux et définitions
01.08.2023 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
PR NF ISO/IEC GUIDE 98-1, X07-040-1PR (08/2023)
Guide pour l'expression de l'incertitude de mesure - Partie 1 : introduction
01.08.2023 - Paper - Englisch, Französisch - AFNOR
mehr dazu80,50 € -
BS ISO 5725-1:2023 + Redline
Tracked Changes. Accuracy (trueness and precision) of measurement methods results General principles definitions
27.07.2023 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 5725-1:2023
Accuracy (trueness and precision) of measurement methods results General principles definitions
24.07.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS ISO 5725-3:2023 + Redline
Tracked Changes. Accuracy (trueness and precision) of measurement methods results Intermediate precision alternative designs for collaborative studies
19.07.2023 - PDF - Englisch - BSI
mehr dazu454,00 € -
UNE 82210:2023
Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
05.07.2023 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
BS ISO 5725-3:2023
Accuracy (trueness and precision) of measurement methods results Intermediate precision alternative designs for collaborative studies
04.07.2023 - PDF - Englisch - BSI
mehr dazu348,00 € -
XP ISO/TS 27878, X06-083 (05/2023)
Reproductibilité du niveau de détection (LOD) des méthodes binaires pour des études de validation collaboratives et internes
01.05.2023 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
IEC GUIDE 115:2023
IEC GUIDE 115:2023 Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector
12.04.2023 - PDF - Englisch, Französisch - IEC
mehr dazu173,00 € -
250,00 €
-
PD ISO/TS 27878:2023
Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
15.02.2023 - PDF - Englisch - BSI
mehr dazu250,00 € -
NBN ISO 24185:2023
Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé ISO 24185:2022
17.01.2023 - PDF - Französisch - NBN
mehr dazu89,00 € -
XP ISO/TS 23471, X06-084 (01/2023)
Plans d'expériences pour l'évaluation de l'incertitude - Utilisation de plans factoriels pour la détermination des fonctions d'incertitude
01.01.2023 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
DIN EN ISO 23131:2023-01
Ellipsometry - Principles (ISO 23131:2021), German version EN ISO 23131:2022
01.01.2023 - PDF - Deutsche - DIN
mehr dazu85,79 € -
PD ISO/TS 23471:2022
Experimental designs for evaluation of uncertainty. Use of factorial designs for determining uncertainty functions
30.11.2022 - PDF - Englisch - BSI
mehr dazu293,00 € -
89,00 €
-
89,00 €
-
89,00 €
-
ASTM D3609-22
Standard Practice for Calibration Techniques Using Permeation Tubes
01.11.2022 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM D3609-22 + Redline
Standard Practice for Calibration Techniques Using Permeation Tubes
01.11.2022 - PDF - Englisch - ASTM
mehr dazu65,00 € -
NF ISO 24185, X06-112 (10/2022)
Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé
01.10.2022 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
BS ISO 24185:2022
Evaluation of the uncertainty of measurements from a stationary autocorrelated process
07.09.2022 - PDF - Englisch - BSI
mehr dazu250,00 € -
ASTM D4298-22
Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
01.09.2022 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM D4298-22 + Redline
Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
01.09.2022 - PDF - Englisch - ASTM
mehr dazu53,00 € -
22/30380920 DC:2022
BS ISO 5725-3. Accuracy (trueness and precision) of measurement methods results Part 3. Intermediate precision alternative designs for collaborative studies
10.08.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
DIN ISO 5725-2:2022-05
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019), Text in German and English
01.05.2022 - PDF - Englisch, Deutsch - DIN
mehr dazu179,72 € -
PD ISO/TR 11843-8:2021
Capability of detection Guidance for the implementation ISO 11843 series
27.04.2022 - PDF - Englisch - BSI
mehr dazu331,00 € -
22/30329297 DC:2022
BS ISO 5725-1. Accuracy (trueness and precision) of measurement methods results Part 1. General principles definitions
20.04.2022 - PDF - Englisch - BSI
mehr dazu24,00 € -
ASTM E29-22
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
01.04.2022 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E29-22 + Redline
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
01.04.2022 - PDF - Englisch - ASTM
mehr dazu61,00 € -
ASTM D7783-21
Standard Practice for Within-laboratory Quantitation Estimation (WQE)
15.11.2021 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM D7783-21 + Redline
Standard Practice for Within-laboratory Quantitation Estimation (WQE)
15.11.2021 - PDF - Englisch - ASTM
mehr dazu68,00 € -
ASTM D5906-21
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
01.11.2021 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM D5906-21 + Redline
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
01.11.2021 - PDF - Englisch - ASTM
mehr dazu68,00 € -
CWA 17815:2021
Materials characterisation - Terminology, metadata and classification
29.10.2021 - PDF - Englisch - NBN
mehr dazu142,00 € -
89,00 €
-
UNE-EN IEC 61010-2-130:2021
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children
01.07.2021 - PDF - Englisch - AENOR
mehr dazu72,00 € -
NBN ISO 5725-5:2021
Accuracy (trueness and precision) of measurement methods and results ? Part 5: Alternative methods for the determination of the precision of a standard measurement method
24.06.2021 - PDF - Französisch - NBN
mehr dazu184,00 € -
NBN ISO 5725-5:2021
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method ISO 5725-5:1998
24.06.2021 - PDF - Englisch - NBN
mehr dazu184,00 € -
VDI/VDE 2600 Blatt 2:2021-05
Prüfprozessmanagement - Ermittlung der Messunsicherheit komplexer Prüfprozesse
01.05.2021 - PDF - Deutsche - VDI
mehr dazu24,30 € -
UNE-EN IEC 61010-2-202:2021
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (Endorsed by Asociación Española de Normalización in February of 2021.)
01.02.2021 - PDF - Englisch - AENOR
mehr dazu65,00 € -
BS EN IEC 61010-2-202:2021
Safety requirements for electrical equipment measurement, control and laboratory use Particular electrically operated valve actuators
22.01.2021 - PDF - Englisch - BSI
mehr dazu180,00 € -
NF X50-144-3 (01/2021)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 3 : implementation of the tailoring process in mechanical environment
01.01.2021 - Paper - Französisch - AFNOR
mehr dazu154,50 € -
NF EN IEC 61010-2-202, C42-020-2-202 (01/2021)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
01.01.2021 - Paper - Französisch - AFNOR
mehr dazu88,33 € -
100,00 €
-
IEC 61010-2-202:2020
IEC 61010-2-202:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
05.11.2020 - PDF - Englisch, Französisch - IEC
mehr dazu92,00 € -
IEC 61010-2-202:2020 + Redline
IEC 61010-2-202:2020 (Redline version) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
05.11.2020 - PDF - Englisch - IEC
mehr dazu120,00 € -
UNE-EN IEC 62828-4:2020
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
01.11.2020 - PDF - Englisch - AENOR
mehr dazu99,00 € -
UNE-EN IEC 62828-5:2020
Reference conditions and procedures for testing Industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
01.11.2020 - PDF - Englisch - AENOR
mehr dazu76,00 € -
NBN ISO 11843-6:2020
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations ISO 11843-6:2019
22.10.2020 - PDF - Englisch - NBN
mehr dazu121,00 € -
NBN ISO 11843-7:2020
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
22.10.2020 - PDF - Englisch - NBN
mehr dazu89,00 € -
NF EN IEC 62828-4, C46-828-4 (09/2020)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4 : specific procedures for level transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 4 : Procédures spécifiques pour les transmetteurs de niveau
01.09.2020 - Paper - Französisch - AFNOR
mehr dazu170,00 € -
NF EN IEC 62828-5, C46-828-5 (09/2020)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5 : specific procedures for flow transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 5 : Procédures spécifiques pour les transmetteurs de débit
01.09.2020 - Paper - Französisch - AFNOR
mehr dazu127,67 € -
NF ISO 5725-4, X06-041-4 (09/2020)
Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
01.09.2020 - Paper - Französisch - AFNOR
mehr dazu86,50 € -
NBN ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods and results ? Part 4: Basic methods for the determination of the trueness of a standard measurement method
27.08.2020 - PDF - Französisch - NBN
mehr dazu121,00 € -
NBN ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method ISO 5725-4:2020
27.08.2020 - PDF - Englisch - NBN
mehr dazu121,00 € -
NBN ISO 5725-2:2020
Accuracy (trueness and precision) of measurement methods and results ? Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
27.08.2020 - PDF - Französisch - NBN
mehr dazu184,00 € -
NBN ISO 5725-2:2020
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method ISO 5725-2:2019
27.08.2020 - PDF - Englisch - NBN
mehr dazu184,00 € -
NF E11-011 (08/2020)
Dimensional measuring equipment - Plain ring standard gauges, plain plug standard gauges and standard discs
01.08.2020 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF ISO 5725-2, X06-041-2 (08/2020)
Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
01.08.2020 - Paper - Französisch - AFNOR
mehr dazu144,50 € -
NBN ISO 21748:2020
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
25.06.2020 - PDF - Französisch - NBN
mehr dazu163,00 € -
NBN ISO 21748:2020
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation ISO 21748:2017
25.06.2020 - PDF - Englisch - NBN
mehr dazu163,00 € -
NBN ISO/TS 28038:2020
Determination and use of polynomial calibration functions ISO/TS 28038:2018
27.05.2020 - PDF - Englisch - NBN
mehr dazu184,00 € -
NF E11-020 (04/2020)
Length measuring instruments - Limit gauges and working standards - Terminology - Shortened designation
01.04.2020 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
BS ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods results Basic for the determination trueness a standard method
27.03.2020 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS ISO 11843-7:2018 + Redline
Tracked Changes. Capability of detection Methodology based on stochastic properties instrumental noise
27.02.2020 - PDF - Englisch - BSI
mehr dazu326,00 € -
BS ISO 21748:2017 + Redline
Tracked Changes. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
26.02.2020 - PDF - Englisch - BSI
mehr dazu454,00 € -
BS EN IEC 61010-2-201:2018 + Redline
Tracked Changes. Safety requirements for electrical equipment measurement, control, and laboratory use Particular control
25.02.2020 - PDF - Englisch - BSI
mehr dazu492,00 € -
BS ISO 11843-6:2019 + Redline
Tracked Changes. Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
24.02.2020 - PDF - Englisch - BSI
mehr dazu326,00 € -
46,92 €
-
BS ISO 5725-2:2019
Accuracy (trueness and precision) of measurement methods results Basic method for the determination repeatability reproducibility a standard
20.12.2019 - PDF - Englisch - BSI
mehr dazu377,00 € -
19/30394199 DC:2019
BS EN 61010-2-201. Safety requirements for electrical equipment measurement, control, and laboratory use Part 2-201. Particular control
06.12.2019 - PDF - Englisch - BSI
mehr dazu24,00 € -
NF E11-015 (12/2019)
Geometrische Produktspezifikation (GPS) - Längenmessgeräte: Konstruktionsmerkmale und messtechnische Merkmale
01.12.2019 - Paper - Französisch - AFNOR
mehr dazu48,00 € -
ISO 80000-11:2019
ISO 80000-11:2019 Quantities and units - Part 11: Characteristic numbers
22.10.2019 - PDF - Englisch - ISOIEC
mehr dazu180,00 € -
ISO 80000-11:2019
ISO 80000-11:2019 Quantities and units - Part 11: Characteristic numbers
22.10.2019 - PDF - Französisch - ISOIEC
mehr dazu180,00 € -
63,00 €
-
86,00 €
-
107,00 €
-
FD X07-041 (07/2019)
Monitoring of measuring instruments - Inter-Instrument Comparisons (C2l) - Conditions of implementation and limits of application
01.07.2019 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
NF X50-144-1 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 1 : basis of the General Environmental Management Plan
01.07.2019 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
NF X50-144-2 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 2 : guidelines for the environmental project tailoring
01.07.2019 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF X50-144-5 (07/2019)
Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 5 : safety factor
01.07.2019 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
NF X50-144-6 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 6 : test factors
01.07.2019 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
24,64 €
-
90,05 €
-
BS ISO 11843-6:2019
Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
27.02.2019 - PDF - Englisch - BSI
mehr dazu250,00 € -
19/30329300 DC:2019
BS ISO 5725-2. Accuracy (trueness and precision) of measurement methods results Part 2. Basic method for the determination repeatability reproducibility a standard
30.01.2019 - PDF - Englisch - BSI
mehr dazu24,00 € -
PD ISO/TS 28038:2018
Determination and use of polynomial calibration functions
21.12.2018 - PDF - Englisch - BSI
mehr dazu348,00 € -
ASTM E3076-18e1
Standard Practice for Determination of the Slope in the Linear Region of a Test Record
15.11.2018 - PDF - Englisch - ASTM
mehr dazu54,00 € -
ASTM E3076-18e1 + Redline
Standard Practice for Determination of the Slope in the Linear Region of a Test Record
15.11.2018 - PDF - Englisch - ASTM
mehr dazu65,00 € -
FD X07-039 (10/2018)
Role of measurement uncertainty in conformity assessment - Implementation of NF ISO/IEC Guide 98-4 - Illustration through industrial case studies - Rôle de l'incertitude de mesure dans l'évaluation de la conformité - Mise en œuvre de la norme NF ISO/IEC Guide 98-4 - Illustration au travers d'études de cas industriels
01.10.2018 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
BS ISO 11843-7:2018
Capability of detection Methodology based on stochastic properties instrumental noise
07.09.2018 - PDF - Englisch - BSI
mehr dazu250,00 € -
UNE-EN IEC 62828-3:2018
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (Endorsed by Asociación Española de Normalización in August of 2018.)
01.08.2018 - PDF - Englisch - AENOR
mehr dazu63,00 € -
UNE-EN IEC 61010-2-201:2018
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in August of 2018.)
01.08.2018 - PDF - Englisch - AENOR
mehr dazu116,00 € -
BS EN IEC 61010-2-201:2018
Safety requirements for electrical equipment measurement, control, and laboratory use Particular control
06.07.2018 - PDF - Englisch - BSI
mehr dazu377,00 € -
BS EN IEC 62828-1:2018
Reference conditions and procedures for testing industrial process measurement transmitters General all types of
24.05.2018 - PDF - Englisch - BSI
mehr dazu377,00 € -
DIN 32937:2018-04 + Redline
Mess- und Prüfmittelüberwachung - Planen, Verwalten und Einsetzen von Mess- und Prüfmitteln
01.04.2018 - PDF - Deutsche - DIN
mehr dazu95,70 € -
DIN 32937:2018-04
Mess- und Prüfmittelüberwachung - Planen, Verwalten und Einsetzen von Mess- und Prüfmitteln
01.04.2018 - PDF - Deutsche - DIN
mehr dazu79,72 € -
UNE-EN IEC 62828-1:2018
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
01.03.2018 - PDF - Englisch - AENOR
mehr dazu122,00 € -
UNE-EN IEC 62828-2:2018
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
01.03.2018 - PDF - Englisch - AENOR
mehr dazu69,00 € -
UNE-EN 62974-1:2018
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
28.02.2018 - PDF - Spanisch - AENOR
mehr dazu76,00 € -
UNE-EN 62974-1:2018
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
28.02.2018 - PDF - Englisch - AENOR
mehr dazu91,20 € -
JIS Z 8462-6:2018
Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
20.02.2018 - PDF - Japanisch - JSA
mehr dazu36,27 € -
JIS Z 8462-7:2018
Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
20.02.2018 - PDF - Japanisch - JSA
mehr dazu36,27 € -
90,05 €
-
VDI/VDE 2600 Blatt 2:2018-02
Prüfprozessmanagement - Ermittlung der Messunsicherheit komplexer Prüfprozesse
01.02.2018 - PDF - Deutsche - VDI
mehr dazu122,25 € -
14,22 €
-
ASTM E2617-17
Standard Practice for Validation of Empirically Derived Multivariate Calibrations
15.12.2017 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM E2617-17 + Redline
Standard Practice for Validation of Empirically Derived Multivariate Calibrations
15.12.2017 - PDF - Englisch - ASTM
mehr dazu68,00 € -
XP X50-144-4 (12/2017)
Nachweis der Widerstandsfähigkeit gegen Umweltfaktoren - Ausführung und Durchführung von Umweltprüfungen - Teil 4 : Anwendung des Konzepts der Anpassung an die klimatische Umwelt
01.12.2017 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
ASTM F2216-17a
Standard Specification for Selectorized Strength Equipment
01.12.2017 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM F2216-17a + Redline
Standard Specification for Selectorized Strength Equipment
01.12.2017 - PDF - Englisch - ASTM
mehr dazu68,00 € -
ASTM F2277-17a
Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
01.12.2017 - PDF - Englisch - ASTM
mehr dazu57,00 € -
ASTM F2277-17a + Redline
Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
01.12.2017 - PDF - Englisch - ASTM
mehr dazu68,00 € -
BS ISO 11843-5:2008+A1:2017
Capability of detection Methodology in the linear and non-linear calibration cases
24.11.2017 - PDF - Englisch - BSI
mehr dazu250,00 € -
IEC 62828-1:2017
IEC 62828-1:2017 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
10.11.2017 - PDF - Englisch, Französisch - IEC
mehr dazu397,00 € -
90,05 €
-
75,83 €
-
75,83 €
-
75,83 €
-
VDI 2048 Blatt 1:2017-09
Kontrolle und Verbesserung der Qualität von Prozessdaten und deren Unsicherheiten mittels Ausgleichsrechnung bei Betriebs- und Abnahmemessungen
01.09.2017 - PDF - Englisch, Deutsch - VDI
mehr dazu259,25 € -
NF ISO 11843-5/A1, X06-048-5/A1 (09/2017)
Erkennungsfähigkeit - Teil 5 : Verfahren in den Fällen der linearen und der nicht-linearen Kalibrierung - Anderung 1
01.09.2017 - Paper - Französisch - AFNOR
mehr dazu25,67 € -
BS ISO 21748:2017
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
10.07.2017 - PDF - Englisch - BSI
mehr dazu348,00 € -
NF ISO 21748, X06-067 (07/2017)
Leitfaden zur Anwendung von Schätzwerten der Wiederholbarkeit, der Vergleichspräzision und der Genauigkeit im Rahmen der Bewertung der MeBunsicherheit
01.07.2017 - Paper - Französisch - AFNOR
mehr dazu108,00 € -
NF EN 61010-2-202, C42-020-2-202 (06/2017)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-202 : Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe
01.06.2017 - Paper - Französisch - AFNOR
mehr dazu88,33 € -
ISO 11843-5:2008/Amd 1:2017
Capability of detection
Part 5: Methodology in the linear and non-linear calibration cases
12.05.2017 - Paper - Französisch - ISO
mehr dazu21,00 € -
ISO 21748:2017 (R2022)
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
General information
24.04.2017 - Paper - Französisch - ISO
mehr dazu199,00 € -
IEC 61010-2-201:2017
IEC 61010-2-201:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
24.03.2017 - PDF - Englisch, Französisch - IEC
mehr dazu397,00 € -
IEC 61010-2-201:2017 + Redline
IEC 61010-2-201:2017 (Redline version) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
24.03.2017 - PDF - Englisch - IEC
mehr dazu516,00 € -
ASTM D6475-17
Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
15.02.2017 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM D6475-17 + Redline
Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
15.02.2017 - PDF - Englisch - ASTM
mehr dazu53,00 € -
NF X43-056 (02/2017)
Umgebende Luft - Metrologie zur Messung von atmosphärischen gasförmigen Schadstoffen - Rückerverfolgbarkeit der Messergebnisse gegennüber den Eichemassen
01.02.2017 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
74,00 €
-
87,00 €
-
PD ISO/TR 21074:2016
Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
30.11.2016 - PDF - Englisch - BSI
mehr dazu250,00 € -
NF EN 14662-3, X43-029-3 (12/2015)
Aussenluft - Messverfahren zur Bestimmung von Benzolkonzentrationen - Teil 3 : Automatische Probenahme mit einer Pumpe mit gaschromatographischer In-situ-Bestimmung
01.12.2015 - Paper - Französisch - AFNOR
mehr dazu149,66 € -
PD ISO/TS 17503:2015
Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs
30.11.2015 - PDF - Englisch - BSI
mehr dazu250,00 € -
Statistics for Scientists and Engineers
This book provides the theoretical framework needed to build, analyze and interpret various statistical models. It helps readers choose the correct model, distinguish among various choices that best captures the data, or solve the problem at hand.
01.09.2015 - Paper - Englisch - WILEY
mehr dazu135,00 € -
FD ISO/GUIDE 33, X07-033 (06/2015)
Referenzmaterialien - Gute Praktiken für die Verwendung von Referenzmaterialien
01.06.2015 - Paper - Französisch - AFNOR
mehr dazu99,00 € -
FD ISO/GUIDE 30, X07-003 (03/2015)
Referenzmaterialien - Ausgewälte Begriffe und Definitionen
01.03.2015 - Paper - Französisch - AFNOR
mehr dazu60,50 € -
UNE 80407:2014 (R2021)
Metrological control of measuring equipment used in the cement test
22.10.2014 - PDF - Spanisch - AENOR
mehr dazu73,00 € -
NF ISO/IEC GUIDE 98-3, X07-040-3 (07/2014)
Messunsicherheit - Teil 3 : Leitfaden zur Angabe der Unsicherheit beim Messen (GUM : 1995)
01.07.2014 - Paper - Französisch - AFNOR
mehr dazu185,50 € -
FD CEN/TR 10345, A06-002 (06/2014)
Richtlinien für die Behandlung von statistischen Daten von verschiedenenLaboren für die Validoerung von Analysenverfahren
01.06.2014 - Paper - Französisch - AFNOR
mehr dazu101,14 € -
36,97 €
-
ASTM E2655-14(2020)
Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
01.01.2014 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM E2655-14(2020) + Redline
Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
01.01.2014 - PDF - Englisch - ASTM
mehr dazu61,00 € -
PD CEN/TR 10345:2013
Richtlinien für die Behandlung von statistischen Daten von verschiedenen Laboren für die Validierung von Analysenverfahren
31.12.2013 - PDF - Englisch - BSI
mehr dazu331,00 € -
CEN/TR 10345:2013
Richtlinien für die Behandlung von statistischen Daten von verschiedenen Laboren für die Validierung von Analysenverfahren
01.12.2013 - PDF - Französisch - NBN
mehr dazu163,00 € -
CEN/TR 10345:2013
Richtlinien für die Behandlung von statistischen Daten von verschiedenen Laboren für die Validierung von Analysenverfahren
01.12.2013 - PDF - Englisch - NBN
mehr dazu163,00 € -
BS EN 62703:2013
Angabe zum Betriebsverhalten von fluorometrischen Sauerstoffanalysatoren in flüssigen Medien
30.11.2013 - PDF - Englisch - BSI
mehr dazu331,00 € -
VDI/VDE 2600 Blatt 1:2013-10
Prüfprozessmanagement - Identifizierung, Klassifizierung und Eignungsnachweise von Prüfprozessen
01.10.2013 - PDF - Englisch, Deutsch - VDI
mehr dazu122,25 € -
NF ISO/IEC GUIDE 98-4, X07-040-4 (10/2013)
Messunsicherheit - Teil 4 : Rolle der Messunsicherheit bei der Konformitätsbewertung
01.10.2013 - Paper - Französisch - AFNOR
mehr dazu118,00 € -
UNE-EN 62703:2013
Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
01.10.2013 - PDF - Englisch - AENOR
mehr dazu78,00 € -
IEC 62703:2013
IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
27.06.2013 - PDF - Englisch, Französisch - IEC
mehr dazu311,00 € -
FD X15-140 (05/2013)
Luftfeuchtemessung - Klima- und Thermostatkammer - Kennzeichnung und Kontrolle
01.05.2013 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
NF E04-009 (12/2012)
Geometrische Produktspezifikation (GPS) - Abstufung der Produkt/Prozess-Eigenschaften
01.12.2012 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
VDI 2048 Blatt 3:2012-05
Messunsicherheiten bei Abnahmemessungen an energie- und kraftwerkstechnischen Anlagen - Beispiele, insbesondere Vorbereitung der Abnahme einer Kombi-Anlage
01.05.2012 - PDF - Englisch, Deutsch - VDI
mehr dazu192,25 € -
FD X07-023 (05/2012)
Messtechnik - Bewertung der Messunsicherheit durch Monte-Carlo-Simulation - Grundsätze und Anwendung der Beilage 1 zum GUM
01.05.2012 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
UNE-ISO/IEC GUIA 98-3:2012 IN
Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
15.02.2012 - PDF - Spanisch - AENOR
mehr dazu154,00 € -
UNE-ISO/IEC GUIA 99:2012 IN
International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
15.02.2012 - PDF - Spanisch - AENOR
mehr dazu107,00 € -
ASTM D7729-12(2018)e1
Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
01.01.2012 - PDF - Englisch - ASTM
mehr dazu51,00 € -
ASTM D7729-12(2018)e1 + Redline
Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
01.01.2012 - PDF - Englisch - ASTM
mehr dazu61,00 € -
Guide pratique de la métrologie en entreprise, la fonction metrol
La métrologie d’hier à aujourd’hui
La fonction métrologie dans l’entreprise
L’audit de la fonction métrologie
06.10.2011 - Paper - Französisch - LEXITIS
mehr dazu26,54 € -
Guide pratique de la métrologie à l'atelier
Savoir mesurer à l’atelier
Techniques d’estimation des incertitudes de mesure dimensionnelle
Les états de surface
30.09.2011 - Paper - Französisch - LEXITIS
mehr dazu29,38 € -
JIS Z 8462-5:2011 (R2016)
Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
22.08.2011 - PDF - Japanisch - JSA
mehr dazu25,00 € -
PD IEC/TR 61831:2011
On-line analyser systems. Guide to design and installation
19.08.2011 - PDF - Englisch - BSI
mehr dazu377,00 € -
IEC TR 61831:2011
IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
19.08.2011 - PDF - Englisch - IEC
mehr dazu397,00 € -
94,79 €
-
NF ISO/IEC GUIDE 99, X07-001 (08/2011)
Internationales Vokabular für Gesetzliches Messwesen - Grundsätzliche und allgemeine Konzepte und gebundene Begriffe (VIM)
01.08.2011 - Paper - Englisch, Französisch - AFNOR
mehr dazu151,50 € -
FD GUIDE ISO/IEC 98-1, X07-040-1 (08/2011)
Messunsicherheit - Teil 1 : Einführung zum Ausdrücken der Messunsicherheit
01.08.2011 - Paper - Französisch - AFNOR
mehr dazu86,50 € -
JIS Q 10012:2011 (R2016)
Measurement management systems - Requirements for measurement processes and measuring equipment
20.05.2011 - PDF - Japanisch - JSA
mehr dazu36,27 € -
DIN ISO 11843-5:2010-08
Erkennungsfähigkeit - Teil 5: Verfahren in den Fällen der linearen und der nicht-linearen Kalibrierung (ISO 11843-5:2008), Text Deutsch und Englisch
01.08.2010 - PDF - Englisch, Deutsch - DIN
mehr dazu85,79 € -
0,00 €
-
ASTM D7510-10(2016)e1
Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
01.01.2010 - PDF - Englisch - ASTM
mehr dazu46,00 € -
ASTM D7510-10(2016)e1 + Redline
Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
01.01.2010 - PDF - Englisch - ASTM
mehr dazu53,00 € -
0,00 €