17 : Messtechnik und Messungen. Physikalische Phänomene ICS -Navigation

26/30510361 DC:2026

Draft BS EN 62059-31-1 Ed.2.0 Electricity metering equipment - Dependability Part 31-1: Accelerated reliability testing Elevated temperature and humidity
09.01.2026 - PDF - Englisch - BSI
mehr dazu

24,00 €

BS EN ISO 18589-7:2025

Measurement of radioactivity in the environment — Soil In situ measurement gamma-emitting radionuclides
08.01.2026 - PDF - Englisch - BSI
mehr dazu

390,00 €

PD ISO/TS 11665-13:2025 + Redline

Tracked Changes. Measurement of radioactivity in the environment. Air: radon 222 Determination diffusion coefficient waterproof materials: membrane two-side activity concentration test method
06.01.2026 - PDF - Englisch - BSI
mehr dazu

462,00 €

BS ISO 5725-2:2025 + Redline

Tracked Changes. Accuracy (trueness and precision) of measurement methods results Basic method for the determination repeatability reproducibility a standard
05.01.2026 - PDF - Englisch - BSI
mehr dazu

590,00 €

25/30539902 DC:2026

Draft BS EN 63412-2 Ed.1.0 Ultrasonics - Shear-wave elastography Part 2: Preparation and characterization of phantoms for performance constancy testing
02.01.2026 - PDF - Englisch - BSI
mehr dazu

24,00 €

DIN/TS 45610-1:2026-01

Low-frequency sound - Part 1: Methods for measurement, evaluation and assessment of low-frequency sound immissions
01.01.2026 - PDF - Deutsche - DIN
mehr dazu

78,50 €

DIN/TS 8998-1:2026-01

Acoustics - General supplements for quality assurance of outdoor sound calculation software according to DIN 45687-1 - Part 1: QSI data interface
01.01.2026 - PDF - Deutsche - DIN
mehr dazu

61,68 €

DIN/TS 8999-1:2026-01

Acoustics - Rule specific supplements for quality assurance of software for the calculation of sound outdoors according to DIN 45687-1 - Part 1: RLS-19
01.01.2026 - PDF - Deutsche - DIN
mehr dazu

50,56 €

DIN ISO 9335:2026-01

Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2025), Text in German and English
01.01.2026 - PDF - Englisch, Deutsch - DIN
mehr dazu

98,32 €

DIN EN ISO 80601-2-56:2026-01

Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO/DIS 80601-2-56:2025), German and English version prEN ISO 80601-2-56:2025
01.01.2026 - PDF - Englisch, Deutsch - DIN
mehr dazu

145,14 €

DIN EN 61094-2:2026-01

Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:2009 + AMD1:2022), German version EN 61094-2:2009 + A1:2022
01.01.2026 - PDF - Deutsche - DIN
mehr dazu

122,34 €

VDI/VDE 2630 Blatt 2.2:2026-01

Computed tomography in dimensional measurement - Determination of measurement uncertainty by simulation - Basic qualification of software for radiation simulation
01.01.2026 - PDF - Deutsche - DIN
mehr dazu

97,20 €

ISO/DIS 463:2026

Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of indicators
01.01.2026 - - - ISO
mehr dazu

75,00 €

26/30500398 DC:2026

BS EN ISO 463 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of indicators
01.01.2026 - PDF - Englisch - BSI
mehr dazu

24,00 €

DIN EN ISO 463:2026-01

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of indicators (ISO/DIS 463:2026), German and English version prEN ISO 463:2025
01.01.2026 - PDF - Englisch, Deutsch - DIN
mehr dazu

91,03 €

26/30511964 DC:2025

Draft of BS EN IEC 60865-1 Short-circuit currents - Calculation effects Part 1: Definitions and calculation methods
26.12.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

26/30511914 DC:2025

BS EN IEC/IEEE 63195-4 Assessment of power density human exposure to radio frequency fields from wireless devices in close proximity the head and body (frequency range 6 GHz 300 GHz) Part 4: Computational procedure for absorbed
26.12.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

26/30545913 DC:2025

BS EN IEC 60645-6 Amd.1 Amendment 1 - Electroacoustics Audiometric equipment Part 6: Instruments for the measurement of otoacoustic emissions
26.12.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

NBN EN 1793-2:2025

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation under diffuse sound field conditions
25.12.2025 - - - NBN
mehr dazu

121,00 €

NBN EN 1793-5:2025

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound absorption under direct sound field conditions
25.12.2025 - - - NBN
mehr dazu

184,00 €

NBN EN 1793-6:2025

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - Airborne sound insulation under direct sound field conditions
25.12.2025 - - - NBN
mehr dazu

184,00 €

NBN EN 1793-1:2025

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption under diffuse sound field conditions
25.12.2025 - - - NBN
mehr dazu

142,00 €

NBN EN 1793-4:2025

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - Intrinsic sound diffraction
25.12.2025 - - - NBN
mehr dazu

163,00 €

NBN EN 1793-3:2025

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum
25.12.2025 - - - NBN
mehr dazu

58,00 €

NBN EN ISO 18589-7:2025

Measurement of radioactivity in the environment - Soil - Part 7: In situ measurement of gamma-emitting radionuclides (ISO 18589-7:2025)
25.12.2025 - - - NBN
mehr dazu

187,00 €

BS ISO 5725-2:2025

Accuracy (trueness and precision) of measurement methods results Basic method for the determination repeatability reproducibility a standard
23.12.2025 - PDF - Englisch - BSI
mehr dazu

421,00 €

BS EN IEC 61000-4-30:2025

Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques - Power quality methods
23.12.2025 - PDF - Englisch - BSI
mehr dazu

421,00 €

NBN ISO 13379-1:2025

Zustandsüberwachung und Diagnose von Maschinensystemen – Dateninterpretation und Diagnosetechniken – Teil 1: Allgemeine Richtlinien
22.12.2025 - PDF - Englisch - NBN
mehr dazu

166,00 €

NBN ISO 13381-1:2025

Zustandsüberwachung und Diagnose von Maschinensystemen – Prognosetechnik – Teil 1: Allgemeine Richtlinien und Anforderungen
22.12.2025 - PDF - Englisch - NBN
mehr dazu

124,00 €

BS EN IEC 61252:2025 + Redline

Tracked Changes. Electroacoustics. Personal sound exposure meters
19.12.2025 - PDF - Englisch - BSI
mehr dazu

547,00 €

ISO 5725-2:2025

Accuracy (trueness and precision) of measurement methods and results
18.12.2025 - - - ISO
mehr dazu

229,00 €

BS IEC/IEEE 61869-21:2025

Instrument transformers Uncertainty evaluation in the accuracy test of instrument
18.12.2025 - PDF - Englisch - BSI
mehr dazu

370,00 €

ISO/DIS 1938-1:2025

Geometrical product specifications (GPS) — Dimensional measuring equipment
18.12.2025 - - - ISO
mehr dazu

75,00 €

NBN EN ISO 11929-2:2025

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2025)
18.12.2025 - - - NBN
mehr dazu

166,00 €

NBN EN ISO 11929-1:2025

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2025)
18.12.2025 - - - NBN
mehr dazu

166,00 €

NBN EN ISO 11929-3:2025

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2025)
18.12.2025 - - - NBN
mehr dazu

166,00 €

BS ISO 18990:2025

Measurement of radioactivity in urine-²³⁸Pu, ²³⁹Pu and ²⁴⁰Pu - Test method using alpha spectrometry or ICP-MS
17.12.2025 - PDF - Englisch - BSI
mehr dazu

370,00 €

NBN ISO 5725-5:2025

Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
15.12.2025 - - - NBN
mehr dazu

166,00 €

IEC/IEEE 61869-21:2025

IEC/IEEE 61869-21:2025 Instrument transformers - Part 21: Uncertainty evaluation in the accuracy test of instrument transformers
15.12.2025 - PDF - Englisch - IEC
mehr dazu

302,00 €

NBN ISO 17208-3:2025

Unterwasserakustik – Größen und Verfahren zur Beschreibung und Messung von Unterwasserschall von Schiffen – Teil 3: Anforderungen für Messungen in flachen Gewässern
15.12.2025 - PDF - Englisch - NBN
mehr dazu

187,00 €

ASTM E1953-25

Standard Practice for Description of Thermal Analysis and Rheology Apparatus
15.12.2025 - - - ASTM
mehr dazu

Von: 58,00 €

BS IEC 61874:2025

Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
15.12.2025 - PDF - Englisch - BSI
mehr dazu

201,00 €

BS IEC 61326-2-7:2025

Electrical equipment for measurement, control and laboratory use. EMC requirements Particular requirements. Test configurations, operational conditions, test levels performance criteria devices with Ethernet-APL interfaces
12.12.2025 - PDF - Englisch - BSI
mehr dazu

329,00 €

25/30547873 DC:2025

BS EN IEC 60343-1 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges Part 1: General
12.12.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

IEC 60216-1:2025

IEC 60216-1:2025 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
12.12.2025 - - - IEC
mehr dazu

Von: 302,00 €

IEC 60216-1:2025

IEC 60216-1:2025 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
12.12.2025 - - - IEC
mehr dazu

Von: 302,00 €

ISO 18990:2025

Measurement of radioactivity in urine-238Pu, 239Pu and 240Pu — Test method using alpha spectrometry or ICP-MS
12.12.2025 - - - ISO
mehr dazu

204,00 €

ISO 11929-1:2025

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application
12.12.2025 - - - ISO
mehr dazu

204,00 €

ISO 11929-2:2025

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application
12.12.2025 - - - ISO
mehr dazu

204,00 €

ISO 11929-3:2025

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application
12.12.2025 - - - ISO
mehr dazu

204,00 €

ISO 18589-7:2025

Measurement of radioactivity in the environment — Soil
12.12.2025 - - - ISO
mehr dazu

229,00 €

ISO 3744:2025

Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
11.12.2025 - - - ISO
mehr dazu

229,00 €

25/30429110 DC:2025

Draft BS EN 60243-2 Ed.4.0 Electric strength of insulating materials - Test methods Part 2: Additional requirements for tests using direct voltage
11.12.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

BS ISO 15664:2025 + Redline

Tracked Changes. Acoustics. Noise control design procedures for open plant
10.12.2025 - PDF - Englisch - BSI
mehr dazu

462,00 €

IEC 61874:2025

IEC 61874:2025 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
10.12.2025 - PDF - Englisch - IEC
mehr dazu

93,00 €

PD ISO/TS 11665-13:2025

Measurement of radioactivity in the environment — Air: radon 222 Determination diffusion coefficient waterproof materials: membrane two-side activity concentration test method
09.12.2025 - PDF - Englisch - BSI
mehr dazu

329,00 €

IEC 61326-2-7:2025

IEC 61326-2-7:2025 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-7: Particular requirements - Test configurations, operational conditions, test levels and performance criteria for devices with Ethernet-APL interfaces
04.12.2025 - PDF - Englisch - IEC
mehr dazu

302,00 €

BS ISO 15664:2025

Acoustics. Noise control design procedures for open plant
03.12.2025 - PDF - Englisch - BSI
mehr dazu

329,00 €

UNE-EN IEC 61557-13:2025

Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
03.12.2025 - - - AENOR
mehr dazu

Von: 75,00 €

UNE-EN IEC 61557-16:2025

Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment
03.12.2025 - - - AENOR
mehr dazu

Von: 76,00 €

ISO/TS 11665-13:2025

Measurement of radioactivity in the environment — Air: radon 222
03.12.2025 - PDF - Englisch - ISO
mehr dazu

178,00 €

IEC 60060:2025 SER

IEC 60060:2025 SER High-voltage test techniques - ALL PARTS
02.12.2025 - PDF - Englisch, Französisch - IEC
mehr dazu

1.573,00 €

BS EN IEC 61252:2025

Electroacoustics — Personal sound exposure meters
02.12.2025 - PDF - Englisch - BSI
mehr dazu

390,00 €

NF ISO 5725-5, X06-041-5 (12/2025)

Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 5 : méthodes alternatives pour la détermination de la fidélité d'une méthode de mesure normalisée
01.12.2025 - PDF - Französisch - AFNOR
mehr dazu

114,00 €

DIN EN ISO 26101-2:2025-12

Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO 26101-2:2024), German version EN ISO 26101-2:2024
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

91,03 €

DIN 45687-1:2025-12

Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

105,42 €

DIN 45687-2:2025-12

Acoustics - Software for the calculation of sound outdoors - Part 2: Conformity assessment.
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

48,79 €

VDI 3733:2025-12

Noise at pipes
01.12.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

147,76 €

NF E02-352 (12/2025)

Spécification géométrique des produits (GPS) - Tolérances générales (dimensionnelles et géométriques) pour pièces découpées pliées
01.12.2025 - PDF - Französisch - AFNOR
mehr dazu

82,50 €

DIN 4880:2025-12

Measurement method for determining the through-plane resistance of bipolar plates
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

69,91 €

ISO 15664:2025

Acoustics — Noise control design procedures for open plant
01.12.2025 - PDF - Englisch - ISO
mehr dazu

178,00 €

ASTM F2213-25

Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
01.12.2025 - - - ASTM
mehr dazu

Von: 72,00 €

PR NF EN IEC 61557-9/AA (12/2025)

Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie ,9: Dispositifs de localisation de défauts d'isolement pour réseaux IT
01.12.2025 - PDF - Französisch - AFNOR
mehr dazu

59,50 €

ASTM D1826-25

Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
01.12.2025 - - - ASTM
mehr dazu

Von: 72,00 €

ASTM E2069-25

Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters on Cooling
01.12.2025 - - - ASTM
mehr dazu

Von: 65,00 €

DIN EN ISO 8655-6:2025-12

Piston-operated volumetric apparatus - Part 6: Gravimetric reference measurement procedure for the determination of volume (ISO 8655-6:2022, Corrected version 2022-06), German version EN ISO 8655-6:2022
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

98,32 €

DIN EN 17936:2025-12

Railway applications - Acoustics - Measurement of source terms for environmental noise calculations, German version EN 17936:2024
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

167,66 €

DIN ISO 362-1:2025-12

Acoustics - Engineering method for measurement of noise emitted by accelerating road vehicles - Part 1: M and N categories (ISO 362-1:2022)
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

190,65 €

DIN ISO 362-3:2025-12

Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 3: Indoor testing M and N categories (ISO 362-3:2022)
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

179,53 €

DIN ISO 16254:2025-12

Acoustics - Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation - Engineering method (ISO 16254:2024), Text in German and English
01.12.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

157,10 €

DIN EN ISO 25178-601:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025), German version EN ISO 25178-601:2025
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

105,42 €

DIN EN ISO 25178-602:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2025), German version EN ISO 25178-602:2025
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

105,42 €

DIN EN ISO 25178-603:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments (ISO 25178-603:2025), German version EN ISO 25178-603:2025
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

98,32 €

DIN EN ISO 25178-605:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2025), German version EN ISO 25178-605:2025
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

98,32 €

DIN EN ISO 25178-604:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2025), German version EN ISO 25178-604:2025
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

105,42 €

DIN 16001:2025-12

Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, metrology, requirements and testing
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

91,03 €

VDI/VDE/DGQ/DKD 2618 Blatt 14.1:2025-12

Calibration of measuring and test equipment - Test and calibration instruction for measuring probes with analogue recording of the measured variable
01.12.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

97,20 €

DIN EN ISO 5459:2025-12

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024), German version EN ISO 5459:2024
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

248,22 €

DIN 45667-1:2025-12

Classification methods for the evaluation of irregular oscillations - Part 1: Fundamentals of the classification of irregular oscillations - Reversal point sequence
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

84,58 €

DIN 45667-2:2025-12

Classification methods for the evaluation of irregular oscillations - Part 2: Rainflow process
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

162,06 €

DIN ISO 20816-21:2025-12

Mechanical vibration - Measurement and evaluation of machine vibration - Part 21: Horizontal axis wind turbines (ISO 20816-21:2025)
01.12.2025 - PDF - Deutsche - DIN
mehr dazu

111,40 €

25/30495239 DC:2025

BS EN ISO 13169 Water quality — Uranium — Test method using alpha liquid scintillation counting
01.12.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

ISO/DIS 13169:2025

Water quality — Uranium — Test method using alpha liquid scintillation counting
01.12.2025 - - - ISO
mehr dazu

75,00 €

PR NF EN ISO 9697 (12/2025)

Qualité de l'eau - Activité bêta globale - Méthode d'essai par source épaisse
01.12.2025 - PDF - Französisch - AFNOR
mehr dazu

68,00 €

PR NF EN ISO 13169 (12/2025)

Qualité de l'eau — Uranium — Méthode d'essai par comptage des scintillations alpha en milieu liquide
01.12.2025 - PDF - Französisch - AFNOR
mehr dazu

68,00 €

IEC 63616:2025

IEC 63616:2025 Measurement of the conductivity for metal thin films at microwave and millimeter-wave frequencies - Balanced-type circular disk resonator method
28.11.2025 - - - IEC
mehr dazu

93,00 €

ISO/DIS 11704:2025

Water quality — Gross alpha and gross beta activity — Test method using liquid scintillation counting
27.11.2025 - - - ISO
mehr dazu

75,00 €

ISO/DIS 37194:2025

Smart community infrastructures — Disaster risk reduction — Guidance for the process of selecting seismometer systems suitable for specific purposes
25.11.2025 - PDF - Englisch - ISO
mehr dazu

75,00 €

ISO/DIS 11932:2025

Activity measurements of solid materials considered for recycling, re-use or disposal as non-radioactive waste
21.11.2025 - - - ISO
mehr dazu

75,00 €

IEEE 1553:2025

IEEE Standard for Voltage-Endurance Testing of Form-Wound Coils and Bars for Hydro Generators
20.11.2025 - PDF - Englisch - IEEE
mehr dazu

54,00 €

IEEE 1553:2025

IEEE Standard for Voltage-Endurance Testing of Form-Wound Coils and Bars for Hydro Generators
20.11.2025 - Papier - Englisch - IEEE
mehr dazu

68,00 €

UNE-EN ISO 25178-602:2025

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2025)
19.11.2025 - - - AENOR
mehr dazu

Von: 74,00 €

UNE-EN ISO 25178-601:2025

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025)
19.11.2025 - - - AENOR
mehr dazu

Von: 75,00 €

ISO/DIS 2768:2025

Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general specification of linear and angular sizes
18.11.2025 - - - ISO
mehr dazu

75,00 €

ISO/DIS 20816-3:2025

Mechanical vibration — Measurement and evaluation of machine vibration
15.11.2025 - PDF - Englisch - ISO
mehr dazu

75,00 €

BS ISO 11421:2025 + Redline

Tracked Changes. Optics and photonics. Uncertainty of optical transfer function (OTF) measurement
14.11.2025 - PDF - Englisch - BSI
mehr dazu

590,00 €

25/30549558 DC:2025

BS EN IEC 61326-2-6:2025/AA Electrical equipment for measurement, control and laboratory use. EMC requirements Part 2-6: Particular requirements. In vitro diagnostic (IVD) medical
14.11.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

ISO/DIS 20816-1:2025

Mechanical vibration — Measurement and evaluation of machine vibration
14.11.2025 - PDF - Englisch - ISO
mehr dazu

75,00 €

UNE-EN IEC 60704-2-10:2025

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens
12.11.2025 - - - AENOR
mehr dazu

Von: 69,00 €

BS EN IEC 62631-2-3:2024

Dielectric and resistive properties of solid insulating materials Part 2-3: Relative permittivity dissipation factor. Contact electrode method for films. AC methods
12.11.2025 - PDF - Englisch - BSI
mehr dazu

281,00 €

ISO/CIE DIS 17166:2025

Erythema reference action spectrum and standard erythema dose
11.11.2025 - PDF - Englisch - ISO
mehr dazu

75,00 €

25/30549566 DC:2025

BS ISO/CIE 17166 Erythema reference action spectrum and standard erythema dose
11.11.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

IEEE 316:2025

IEEE Standard for Requirements for Direct Current Instrument Shunts
07.11.2025 - PDF - Englisch - IEEE
mehr dazu

54,00 €

IEEE 316:2025

IEEE Standard for Requirements for Direct Current Instrument Shunts
07.11.2025 - Papier - Englisch - IEEE
mehr dazu

68,00 €

BS ISO 13347-2:2025 + Redline

Tracked Changes. Fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method
07.11.2025 - PDF - Englisch - BSI
mehr dazu

394,00 €

PD IEC TR 63079:2017+A2:2020

Code of practice for hearing-loop systems (HLS)
07.11.2025 - PDF - Englisch - BSI
mehr dazu

421,00 €

BS ISO 11421:2025

Optics and photonics — Uncertainty of optical transfer function (OTF) measurement
06.11.2025 - PDF - Englisch - BSI
mehr dazu

390,00 €

BS EN 50566:2017+A2:2025

Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body
04.11.2025 - PDF - Englisch - BSI
mehr dazu

172,00 €

ISO 11421:2025

Optics and photonics — Uncertainty of optical transfer function (OTF) measurement
03.11.2025 - PDF - Englisch - ISO
mehr dazu

204,00 €

VDI/VDE 2627 Blatt 3:2025-11

Measuring rooms - Guide for construction and operation
01.11.2025 - PDF - Deutsche - DIN
mehr dazu

57,48 €

NF ISO 13347-2, E51-006-2 (11/2025)

Ventilateurs industriels - Détermination des niveaux de puissance acoustique des ventilateurs dans des conditions de laboratoire normalisées - Partie 2 : méthode de la salle réverbérante
01.11.2025 - PDF - Französisch - AFNOR
mehr dazu

89,33 €

NF EN 50413/A1, C99-117/A1 (11/2025)

Norme de base pour les procédures de mesures et de calculs pour l'exposition des personnes aux champs électriques, magnétiques et électromagnétiques (0 Hz - 300 GHz)
01.11.2025 - PDF - Französisch - AFNOR
mehr dazu

51,00 €

PR NF EN IEC 61557-18 (11/2025)

Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie 18 : Contrôleur d'isolement du système d'alimentation en courant continu pour véhicules électriques
01.11.2025 - PDF - Französisch - AFNOR
mehr dazu

78,50 €

ASTM C1649-25

Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
01.11.2025 - - - ASTM
mehr dazu

Von: 58,00 €

ASTM C1650-25

Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
01.11.2025 - - - ASTM
mehr dazu

Von: 58,00 €

ASTM D7279-25

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
01.11.2025 - - - ASTM
mehr dazu

Von: 65,00 €

ASTM D6896-25

Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
01.11.2025 - - - ASTM
mehr dazu

Von: 65,00 €

DIN 38458-1:2025-11

Acoustics - Noise emissions from road distribution and delivery processes - Part 1: Fundamentals and measurement methods
01.11.2025 - PDF - Deutsche - DIN
mehr dazu

116,64 €

DIN EN IEC 62127-2:2025-11

Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields (IEC 62127-2:2025), German version EN IEC 62127-2:2025.
01.11.2025 - PDF - Deutsche - DIN
mehr dazu

288,60 €

DIN 16282:2025-11

Siphons for pressure gauges and their accessories
01.11.2025 - PDF - Deutsche - DIN
mehr dazu

69,91 €

DIN EN ISO 5059-1:2025-11

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of two-point inside micrometers (ISO 5059-1:2025), German version EN ISO 5059-1:2025
01.11.2025 - PDF - Deutsche - DIN
mehr dazu

91,03 €

DIN ISO 20816-1:2025-11

Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (ISO/DIS 20816-1:2025), Text in German and English
01.11.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

128,22 €

DIN ISO 20816-3:2025-11

Mechanical vibration - Measurement and evaluation of machine vibration - Part 3: Industrial machinery with operating speeds between 120 r/min and 30000 r/min (ISO/DIS 20816-3:2025), Text in German and English
01.11.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

105,42 €

NF M60-312-2 (11/2025)

Énergie nucléaire - Mesure de la radioactivité dans l'environnement - Détermination de l'activité du tritium dans l'air - Partie 2 : méthode d'essai à l'aide d'un prélèvement par captage sans dilution de la vapeur d'eau dans l'air
01.11.2025 - PDF - Französisch - AFNOR
mehr dazu

102,00 €

BS ISO 11843-6:2025 + Redline

Tracked Changes. Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
31.10.2025 - PDF - Englisch - BSI
mehr dazu

394,00 €

IEEE 473:2025

IEEE Recommended Practice for an Electromagnetic Site Survey (10 kHz to 40 GHz)
31.10.2025 - PDF - Englisch - IEEE
mehr dazu

59,00 €

IEEE 473:2025

IEEE Recommended Practice for an Electromagnetic Site Survey (10 kHz to 40 GHz)
31.10.2025 - Papier - Englisch - IEEE
mehr dazu

73,00 €

BS ISO 13347-2:2025

Fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method
31.10.2025 - PDF - Englisch - BSI
mehr dazu

281,00 €

IEEE 4001:2025

IEEE Standard for Characterization of Hyperspectral Imaging Devices--Ultraviolet Through Shortwave Infrared
30.10.2025 - PDF - Englisch - IEEE
mehr dazu

120,00 €

IEEE 4001:2025

IEEE Standard for Characterization of Hyperspectral Imaging Devices--Ultraviolet Through Shortwave Infrared
30.10.2025 - Papier - Englisch - IEEE
mehr dazu

149,00 €

ISO 13347-2:2025

Fans — Determination of fan sound power levels under standardized laboratory conditions
29.10.2025 - - - ISO
mehr dazu

152,00 €

BS ISO 11843-6:2025

Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
27.10.2025 - PDF - Englisch - BSI
mehr dazu

281,00 €

ISO 11843-6:2025

Capability of detection
23.10.2025 - PDF - Englisch - ISO
mehr dazu

152,00 €

25/30543708 DC:2025

BS ISO 13373-7 Condition monitoring and diagnostics of machines — Vibration condition Part 7: Diagnostic techniques for machine sets in hydraulic power generating pump-storage plants
23.10.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

ISO/DIS 13373-7:2025

Condition monitoring and diagnostics of machines — Vibration condition monitoring
23.10.2025 - PDF - Englisch - ISO
mehr dazu

75,00 €

BS EN IEC 60645-7:2025

Electroacoustics. Audiometric equipment Instruments for the measurement of auditory evoked potentials
22.10.2025 - PDF - Englisch - BSI
mehr dazu

281,00 €

NBN ISO 7605:2025

Unterwasserakustik – Messung von Unterwasser-Umgebungsgeräuschen
21.10.2025 - PDF - Englisch - NBN
mehr dazu

187,00 €

NBN ISO 3966:2025

Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
21.10.2025 - - - NBN
mehr dazu

187,00 €

NBN ISO 13347-4:2025

Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method
21.10.2025 - - - NBN
mehr dazu

145,00 €

NBN ISO 13347-1:2025

Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview
21.10.2025 - - - NBN
mehr dazu

166,00 €

25/30502839 DC:2025

BS ISO 2533 Standard atmosphere
17.10.2025 - PDF - Englisch - BSI
mehr dazu

80,00 €

ISO/DIS 2533:2025

Standard atmosphere
17.10.2025 - PDF - Englisch - ISO
mehr dazu

155,00 €

25/30510411 DC:2025

Draft BS EN IEC 63600 Evaluation of hydrophobicity retention of polymeric insulating materials under high voltage stress with the dynamic drop test
17.10.2025 - PDF - Englisch - BSI
mehr dazu

24,00 €

IEC 61252:2025

IEC 61252:2025 Electroacoustics - Personal sound exposure meters
17.10.2025 - - - IEC
mehr dazu

389,00 €

NBN ISO 13165-4:2025

Water quality — Radium-226 — Part 4: Test method using alpha spectrometry
17.10.2025 - - - NBN
mehr dazu

145,00 €

BS EN IEC 60704-2-3:2025 + Redline

Tracked Changes. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements dishwashers
15.10.2025 - PDF - Englisch - BSI
mehr dazu

283,00 €

UNE-EN 16211:2025

Ventilation for buildings - Measurement of air flow rates on site - Methods
15.10.2025 - - - AENOR
mehr dazu

Von: 121,00 €

BS EN IEC 61340-4-7:2025 + Redline

Tracked Changes. Electrostatics Standard test methods for specific applications. Ionization
15.10.2025 - PDF - Englisch - BSI
mehr dazu

462,00 €

BS ISO 13379-1:2025 + Redline

Tracked Changes. Condition monitoring and diagnostics of machine systems. Data interpretation techniques General guidelines
15.10.2025 - PDF - Englisch - BSI
mehr dazu

520,00 €

BS EN ISO 19581:2025 + Redline

Tracked Changes. Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry
14.10.2025 - PDF - Englisch - BSI
mehr dazu

394,00 €

ISO/DIS 18436-9:2025

Condition Monitoring and Diagnostics of Machine Systems — Requirements for training and certification of personnel
12.10.2025 - PDF - Englisch - ISO
mehr dazu

75,00 €

ISO 5725-5:2025

Accuracy (trueness and precision) of measurement methods and results
10.10.2025 - - - ISO
mehr dazu

204,00 €

BS EN IEC 61340-4-7:2025

Electrostatics Standard test methods for specific applications. Ionization
08.10.2025 - PDF - Englisch - BSI
mehr dazu

329,00 €

BS ISO 13379-1:2025

Condition monitoring and diagnostics of machine systems. Data interpretation techniques General guidelines
08.10.2025 - PDF - Englisch - BSI
mehr dazu

370,00 €

BS EN ISO 19581:2025

Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry
07.10.2025 - PDF - Englisch - BSI
mehr dazu

281,00 €

BS EN ISO 3095:2025 + Redline

Tracked Changes. Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
03.10.2025 - PDF - Englisch - BSI
mehr dazu

590,00 €

ISO/DIS 10360-102:2025

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS)
02.10.2025 - PDF - Französisch - ISO
mehr dazu

75,00 €

ISO 13379-1:2025

Condition monitoring and diagnostics of machine systems — Data interpretation and diagnostics techniques
02.10.2025 - PDF - Englisch - ISO
mehr dazu

204,00 €

NBN EN ISO 19581:2025

Measurement of radioactivity - Gamma emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry (ISO 19581:2025)
02.10.2025 - - - NBN
mehr dazu

124,00 €

VDI/VDE 2600 Blatt 3:2025-10

Inspection process management - Inspection planning
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

83,18 €

VDI/VDE-EE 2600 Blatt 3.1:2025-10

Inspection process management - Inspection planning - Application example for a mechanically manufactured part
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

41,59 €

VDI/VDE-EE 2600 Blatt 3.2:2025-10

Inspection process management - Inspection planning - Application example for electric tests of an electronic part
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

57,48 €

NF ISO 80000-7/A1, X02-300-7 (10/2025)

Grandeurs et unités - Partie 7 : lumière et rayonnements - Amendement 1
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

27,33 €

ISO/FDIS 13347-3:2025

Fans — Determination of fan sound power levels under standardized laboratory conditions
01.10.2025 - PDF - Französisch - ISO
mehr dazu

75,00 €

DIN EN 1434-3:2025-10

Thermal energy meters - Part 3: Data exchange and interfaces, German version EN 1434-3:2025
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

77,20 €

DIN EN IEC 63297:2025-10

Sensing devices for non-intrusive load monitoring (NILM) systems (IEC 85/933/CDV:2024), German and English version prEN IEC 63297:2024
01.10.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

105,42 €

PR NF EN IEC 63580 (10/2025)

Équipement de mesure des grandeurs électriques et électromagnétiques - Aspects environnementaux
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

103,00 €

PR NF EN ISO 2768 (10/2025)

Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Limites de tolérance pour la spécification générale des tailles linéaires et angulaires
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

59,50 €

DIN EN ISO 3219-3:2025-10

Rheology - Part 3: Test procedure and examples for the evaluation of results when using rotational and oscillatory rheometry (ISO/DIS 3219-3:2025), German and English version prEN ISO 3219-3:2025
01.10.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

128,22 €

VDI/VDE 3519 Blatt 11:2025-10

Level measurement - Radiometric methods
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

67,01 €

VDI/VDE 3519 Blatt 13:2025-10

Level measurement - Microwave methods
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

90,28 €

VDI/VDE 3519 Blatt 7:2025-10

Level measurement - Measuring by damping vibrations and inhibiting movements
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

67,01 €

VDI/VDE 3519 Blatt 9:2025-10

Level measurement - Capacitive and admittance methods
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

67,01 €

DIN ISO 13473-4:2025-10

Characterization of pavement texture by use of surface profiles - Part 4: One third octave band spectral analysis of surface profiles (ISO 13473-4:2024), Text in German and English
01.10.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

122,34 €

ASTM D6122-25

Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
01.10.2025 - - - ASTM
mehr dazu

Von: 102,00 €

VDI/VDE 5590 Blatt 3:2025-10

Terahertz systems - Frequency domain systems
01.10.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

122,52 €

NF EN IEC 60645-7, S31-001-7 (10/2025)

Électroacoustique - Appareils audiométriques - Partie 7 : instruments pour le mesurage des potentiels évoqués auditifs
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

109,00 €

UNE-EN ISO 16610-31:2025

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2025)
01.10.2025 - - - AENOR
mehr dazu

Von: 78,00 €

NF EN IEC 61340-4-7 (10/2025)

Electrostatique - Partie 4-7 : méthodes d'essai normalisées pour des applications spécifiques - Ionisation
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

111,00 €

ASTM E1979-25

Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
01.10.2025 - - - ASTM
mehr dazu

Von: 65,00 €

VDI/VDE 2614 Blatt 1:2025-10

Measurement and testing of face serrations - Evaluation of Hirth serrations with centrically tapered spaces
01.10.2025 - PDF - Englisch, Deutsch - DIN
mehr dazu

102,62 €

UNE-EN ISO 16610-21:2025

Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2025)
01.10.2025 - - - AENOR
mehr dazu

Von: 89,00 €

NF EN ISO 19581, M60-833 (10/2025)

Mesurage de la radioactivité - Radionucléides émetteurs gamma - Méthode d'essai de dépistage par spectrométrie gamma utilisant des détecteurs par scintillation
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

82,50 €

DIN 25457-2:2025-10

Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 2: Clearance of residual material
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

84,58 €

DIN 25457-3:2025-10

Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 3: Release of building structures and floor areas
01.10.2025 - PDF - Deutsche - DIN
mehr dazu

128,22 €

PR NF ISO 11932 (10/2025)

Mesures d'activité de matériaux solides considérés comme déchets non radioactifs destinés à un recyclage, une réutilisation ou une mise au rebut
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

68,00 €

NF EN 50566/A2, C99-106/A2 (10/2025)

Norme de produit pour démontrer la conformité des dispositifs de communication sans fil aux restrictions de base et aux valeurs limites d'exposition relatives à l'exposition des personnes aux champs électromagnétiques dans la plage de fréquences de 30 MHz à 6 GHz: dispositifs tenus à la main ou portés à proximité immédiate du corps humain
01.10.2025 - PDF - Französisch - AFNOR
mehr dazu

42,67 €