| Name | Unterstützung | Language | Verfügbarkeit | Datum der Ausstellung | Preis | ||
|---|---|---|---|---|---|---|---|
|
PDF |
Englisch |
gültig |
01.03.2022 |
45,15 € |
|
||
Details
This standard specifies the test method to be used to evaluate the adhesion properties of painted metal, plastic, and sealer before and after environmental testing. This standard describes the crosshatch and the “X” cut tape adhesion tests using the cutting tools or cutting guide. All paint systems must meet the adhesion requirements when the appropriate method is used. Unless otherwise specified, the dry film thickness will determine which guide or tool is required. If either method is not usable due to size and/or shape constraints (typically found in small parts) the application of this test will be at the discretion of the responsible engineer.
Zusätzliche Information
| Autor | General Motors Worldwide (GMW) |
|---|---|
| Veröffentlicht von | GM |
| Document type | Normen |
| Ausgabe | 5 |
| ICS | 43 : Straßenfahrzeugsysteme
|
| Seitenzahl | 8 |
| Ersetzt | GMW 14829:2017 |
