Statistische Methoden
-
46,02 €
-
JIS Z 9061:2016
Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD)
20.12.2016 - PDF - Japanisch - JSA
mehr dazu58,50 € -
CEN/TR 16886:2016
Leitfaden für die Anwendung statistischer Methoden zur Bestimmung der Eigenschaften von Mauerwerk Produkten
26.11.2016 - PDF - Englisch - NBN
mehr dazu184,00 € -
PD ISO/TR 16705:2016
Statistical methods for implementation of Six Sigma. Selected illustrations of contingency table analysis
31.08.2016 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS ISO 22514-4:2016
Statistical methods in process management. Capability and performance Process capability estimates measures
31.08.2016 - PDF - Englisch - BSI
mehr dazu348,00 € -
30,24 €
-
IEC 61703:2016
IEC 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
12.08.2016 - PDF - Englisch, Französisch - IEC
mehr dazu431,00 € -
ISO 22514-4:2016 (R2022)
Statistical methods in process management
Capability and performance
04.08.2016 - Paper - Englisch - ISO
mehr dazu199,00 € -
DIN ISO 22514-1:2016-08
Statistische Methoden im Prozessmanagement - Fähigkeit und Leistung - Teil 1: Allgemeine Grundsätze und Begriffe (ISO 22514-1:2014), Text Deutsch und Englisch
01.08.2016 - PDF - Englisch, Deutsch - DIN
mehr dazu104,95 € -
PD IEC/TR 63039:2016
Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state
05.07.2016 - PDF - Englisch - BSI
mehr dazu377,00 € -
IEC TR 63039:2016
IEC TR 63039:2016 Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state
05.07.2016 - PDF - Englisch - IEC
mehr dazu397,00 € -
86,67 €
-
ASTM E2587-16(2021)e1
Standard Practice for Use of Control Charts in Statistical Process Control
01.04.2016 - PDF - Englisch - ASTM
mehr dazu74,00 € -
16,30 €
-
293,00 €
-
UNE-ISO 3534-4:2016
Statistics -- Vocabulary and symbols -- Part 4: Survey sampling
17.02.2016 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
148,00 €
-
PD ISO/TR 13195:2015
Selected illustrations of response surface method. Central composite design
31.12.2015 - PDF - Englisch - BSI
mehr dazu377,00 € -
BS ISO 18404:2015
Quantitative methods in process improvement. Six Sigma. Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
30.11.2015 - PDF - Englisch - BSI
mehr dazu331,00 € -
UNE-ISO 16269-6:2015
Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
04.11.2015 - PDF - Spanisch - AENOR
mehr dazu99,00 € -
JIS Z 8101-2:2015
Statistics - Vocabulary and symbols - Part 2: Applied statistics
20.10.2015 - PDF - Japanisch - JSA
mehr dazu72,41 € -
JIS Z 8101-1:2015
Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability
20.10.2015 - PDF - Japanisch - JSA
mehr dazu62,66 € -
BS 5700:2015
Guide to the selection of charting methods and capability assessment for use in statistical process control
30.09.2015 - PDF - Englisch - BSI
mehr dazu250,00 € -
32,23 €
-
SAE EIA 557B:2015-07-01
Statistical Process Control Systems (Stabilized: Jul 2015)
01.07.2015 - PDF - Englisch - SAE
mehr dazu127,00 € -
25,00 €
-
UNE-ISO 16269-4:2015 (R2021)
Statistical interpretation of data -- Part 4: Detection and treatment of outliers
22.04.2015 - PDF - Spanisch - AENOR
mehr dazu105,00 € -
116,00 €
-
BS ISO 17258:2015
Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
31.01.2015 - PDF - Englisch - BSI
mehr dazu331,00 € -
21,71 €
-
199,00 €
-
NF ISO 22514-8, X06-075-8 (12/2014)
Statistical methods in process management - Capability and performance - Part 8 : machine performance of a multi-state production process - Méthodes statistiques dans la gestion de processus
01.12.2014 - Paper - Französisch - AFNOR
mehr dazu108,00 € -
UNE-EN 61710:2014
Power law model - Goodness-of-fit tests and estimation methods
24.09.2014 - PDF - Spanisch - AENOR
mehr dazu100,00 € -
UNE-EN 61710:2014
Power law model - Goodness-of-fit tests and estimation methods
24.09.2014 - PDF - Englisch - AENOR
mehr dazu120,00 € -
UNE-ISO 2859-3:2014
Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures
10.09.2014 - PDF - Spanisch - AENOR
mehr dazu76,00 € -
UNE-ISO 2859-5:2014
Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
10.09.2014 - PDF - Spanisch - AENOR
mehr dazu92,00 € -
UNE-ISO 3534-3:2014
Statistics -- Vocabulary and symbols -- Part 3: Design of experiments
10.09.2014 - PDF - Spanisch - AENOR
mehr dazu110,00 € -
NF ISO 22514-1, X06-075-1 (09/2014)
Statistische Verfahren im Prozessmanagement - Fähigkeit und Leistung - Teil 1 : Allgemeine Grundsätze und Begriffe
01.09.2014 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
DIN ISO 2859-1:2014-08
Annahmestichprobenprüfung anhand der Anzahl fehlerhafter Einheiten oder Fehler (Attributprüfung) - Teil 1: Nach der annehmbaren Qualitätsgrenzlage (AQL) geordnete Stichprobenpläne für die Prüfung einer Serie von Losen - (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011), Text in Deutsch und Englisch
01.08.2014 - PDF - Englisch, Deutsch - DIN
mehr dazu234,02 € -
BS ISO 16336:2014
Applications of statistical and related methods to new technology and product development process. Robust parameter design (RPD)
31.07.2014 - PDF - Englisch - BSI
mehr dazu377,00 € -
NF ISO 3951-2, X06-013-2 (07/2014)
Verfahren für die Stichprobenprüfung anhand quantitaver Merkmale (Variablenprüfung) - Teil 2 : Allgemeine Spezifikation für Einfach-Stichprobenanweisungen, geordnet nach der annehmbaren Qualitätsgrenzlage (AQL) für losweise Prüfung von unabhängigen Qualitätsmerkmalen
01.07.2014 - Paper - Französisch - AFNOR
mehr dazu140,00 € -
BS ISO 22514-8:2014
Statistical methods in process management. Capability and performance Machine of a multi-state production
30.06.2014 - PDF - Englisch - BSI
mehr dazu331,00 € -
BS ISO 22514-1:2014
Statistical methods in process management. Capability and performance General principles concepts
30.06.2014 - PDF - Englisch - BSI
mehr dazu293,00 € -
UNE-EN 60300-3-12:2014
Dependability management - Part 3-12: Application guide - Integrated logistic support
11.06.2014 - PDF - Spanisch - AENOR
mehr dazu100,00 € -
UNE-EN 60300-3-12:2014
Dependability management - Part 3-12: Application guide - Integrated logistic support
11.06.2014 - PDF - Englisch - AENOR
mehr dazu120,00 € -
ISO 22514-8:2014 (R2020)
Statistical methods in process management
Capability and performance
02.06.2014 - Paper - Französisch - ISO
mehr dazu199,00 € -
ISO 22514-1:2014 (R2019)
Statistical methods in process management
Capability and performance
02.06.2014 - Paper - Englisch - ISO
mehr dazu148,00 € -
ISO 22514-1:2014 (R2019)
Statistical methods in process management
Capability and performance
02.06.2014 - Paper - Französisch - ISO
mehr dazu148,00 € -
NF ISO 3534-4, X06-002-4 (06/2014)
Statistik - Begriffe und Symbole - Teil 4 : Probenahme zwecks Umfrage
01.06.2014 - Paper - Französisch - AFNOR
mehr dazu99,00 € -
FD CEN/TR 10345, A06-002 (06/2014)
Richtlinien für die Behandlung von statistischen Daten von verschiedenenLaboren für die Validoerung von Analysenverfahren
01.06.2014 - Paper - Französisch - AFNOR
mehr dazu101,14 € -
55,00 €
-
65,00 €
-
293,00 €
-
174,00 €
-
DIN CEN/TR 16369*DIN SPEC 18769:2014-04
Use of control charts in the production of concrete, English version CEN/TR 16369:2012
01.04.2014 - PDF - Englisch - DIN
mehr dazu101,03 € -
NF ISO 16269-6, X06-040-6 (03/2014)
Statistische Auswertung von Daten - Teil 6 : Ermittlung eines statistischen Anteilsbereichs
01.03.2014 - Paper - Französisch - AFNOR
mehr dazu119,00 € -
UNE-EN 61124:2014
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
26.02.2014 - PDF - Spanisch - AENOR
mehr dazu149,00 € -
UNE-EN 61124:2014
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
26.02.2014 - PDF - Englisch - AENOR
mehr dazu178,80 € -
Appliquer le Toc Lean Six Sigma Dans les Services les methodes et out
Déployer et mettre en oeuvre les méthodes et outils d’une relation de service performante et durable
04.02.2014 - Paper - Französisch - LEXITIS
mehr dazu43,60 € -
348,00 €
-
BS ISO 16269-6:2014
Statistical interpretation of data Determination statistical tolerance intervals
31.01.2014 - PDF - Englisch - BSI
mehr dazu348,00 € -
ISO 16269-6:2014
Statistical interpretation of data
Part 6: Determination of statistical tolerance intervals
23.01.2014 - Paper - Französisch - ISO
mehr dazu199,00 € -
PD CEN/TR 10345:2013
Richtlinien für die Behandlung von statistischen Daten von verschiedenen Laboren für die Validierung von Analysenverfahren
31.12.2013 - PDF - Englisch - BSI
mehr dazu331,00 € -
DIN ISO 3534-2:2013-12
Statistik - Begriffe und Formelzeichen - Teil 2: Angewandte Statistik (ISO 3534-2:2006), Text Deutsch und Englisch
01.12.2013 - PDF - Englisch, Deutsch - DIN
mehr dazu201,96 € -
CEN/TR 10345:2013
Richtlinien für die Behandlung von statistischen Daten von verschiedenen Laboren für die Validierung von Analysenverfahren
01.12.2013 - PDF - Französisch - NBN
mehr dazu163,00 € -
CEN/TR 10345:2013
Richtlinien für die Behandlung von statistischen Daten von verschiedenen Laboren für die Validierung von Analysenverfahren
01.12.2013 - PDF - Englisch - NBN
mehr dazu163,00 € -
BS EN 61710:2013
Potenzgesetz-Modell. Anpassungstests und Schätzverfahren
30.09.2013 - PDF - Englisch - BSI
mehr dazu348,00 € -
UNE-ISO 3534-1:2013 (R2021)
Statistics -- Vocabulary and symbols -- Part 1: General statistical terms and terms used in probability
18.09.2013 - PDF - Spanisch - AENOR
mehr dazu107,00 € -
UNE-ISO 3534-2:2013
Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
18.09.2013 - PDF - Spanisch - AENOR
mehr dazu126,00 € -
ISO 3951-2:2013 (R2018)
Sampling procedures for inspection by variables
Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
27.08.2013 - Paper - Englisch - ISO
mehr dazu248,00 € -
ISO 3951-2:2013 (R2018)
Sampling procedures for inspection by variables
Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
27.08.2013 - Paper - Französisch - ISO
mehr dazu248,00 € -
XP ISO/TS 28037, X06-077 (08/2013)
Bestimmung und Nutzung der Linearkalibrierungsfunktionen
01.08.2013 - Paper - Französisch - AFNOR
mehr dazu144,67 € -
63,00 €
-
NF ISO 3534-3, X06-002-3 (06/2013)
Statistik - Begriffe und Formelzeichen - Teil 3 : Versuchsplanung
01.06.2013 - Paper - Englisch, Französisch - AFNOR
mehr dazu151,50 € -
IEC 61710:2013
IEC 61710:2013 Power law model - Goodness-of-fit tests and estimation methods
22.05.2013 - PDF - Englisch, Französisch - IEC
mehr dazu345,00 € -
BS ISO 3534-3:2013
Statistics. Vocabulary and symbols Design of experiments
30.04.2013 - PDF - Englisch - BSI
mehr dazu398,00 € -
Lean Six Sigma pour les services
Comment utiliser la vitesse Lean & la qualité Six Sigma pour améliorer vos services et transactions
11.04.2013 - Paper - Französisch - MAXIMA
mehr dazu42,46 € -
BS ISO 22514-6:2013
Statistical methods in process management. Capability and performance Process capability statistics for characteristics following a multivariate normal distribution
31.03.2013 - PDF - Englisch - BSI
mehr dazu331,00 € -
UNE-ISO 2859-10:2013
Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
25.03.2013 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-ISO 2859-4:2013
Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels
25.03.2013 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
101,00 €
-
PD ISO/TR 13519:2012
Guidance on the development and use of ISO statistical publications supported by software
31.01.2013 - PDF - Englisch - BSI
mehr dazu250,00 € -
PD ISO/TR 13587:2012
Three statistical approaches for the assessment and interpretation of measurement uncertainty
31.12.2012 - PDF - Englisch - BSI
mehr dazu348,00 € -
UNE-ISO 3951-1:2012
Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
26.12.2012 - PDF - Spanisch - AENOR
mehr dazu133,00 € -
UNE-ISO 3951-2:2012
Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
26.12.2012 - PDF - Spanisch - AENOR
mehr dazu127,00 € -
112,00 €
-
134,40 €
-
UNE-ISO 13053-1:2012 (R2022)
Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology
05.12.2012 - PDF - Spanisch - AENOR
mehr dazu79,00 € -
UNE-ISO 13053-2:2012
Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques
05.12.2012 - PDF - Spanisch - AENOR
mehr dazu95,00 € -
PD CEN/TR 16369:2012
Anwendung von Qualitätsregelkarten bei der Herstellung von Beton
30.11.2012 - PDF - Englisch - BSI
mehr dazu348,00 € -
20,81 €
-
FD ISO/TR 13519, X06-082 (10/2012)
Leitfaden zur Entwicklung und Gebrauch von softwareunterstützten statistischen ISO-Publikationen
01.10.2012 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
184,00 €
-
ISO/TR 13519:2012
Guidance on the development and use of ISO statistical publications supported by software
General information
31.08.2012 - Paper - Französisch - ISO
mehr dazu110,00 € -
UNE-ISO 2859-1:2012
Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
18.07.2012 - PDF - Spanisch - AENOR
mehr dazu128,00 € -
Statistiques pour la gestion
3e edition
Applications avec excel, spss, amos et smartpls
13.06.2012 - Paper - Französisch - DUNOD
mehr dazu41,14 € -
La révolution ToC Lean Six Sigma dans les servicesorer la performance
Comprendre, analyser et améliorer la performance de sa relation de service
21.05.2012 - Paper - Französisch - LEXITIS
mehr dazu34,12 € -
FD X07-023 (05/2012)
Messtechnik - Bewertung der Messunsicherheit durch Monte-Carlo-Simulation - Grundsätze und Anwendung der Beilage 1 zum GUM
01.05.2012 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
JIS Z 9031:2012 (R2017)
Procedure for random number generation and randomization
20.04.2012 - PDF - Japanisch - JSA
mehr dazu62,66 € -
UNE-ISO 2859-2:2012
Sampling procedures for inspection by attributes. Parte 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection.
04.04.2012 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
11,28 €
-
PD ISO/TR 12888:2011
Selected illustrations of gauge repeatability and reproducibility studies
31.03.2012 - PDF - Englisch - BSI
mehr dazu331,00 € -
UNE-IEC 60050-103:2012
International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions
15.02.2012 - PDF - Spanisch - AENOR
mehr dazu106,00 € -
ASTM E2093-12(2016)
Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
01.01.2012 - PDF - Englisch - ASTM
mehr dazu51,00 € -
FD ISO/TR 12888, X06-093 (12/2011)
Ausgewählte Beispiele für Untersuchungen der Wiederholbarkeit und Vergleichbarkeit von Lehren
01.12.2011 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
BS ISO 13053-1:2011
Quantitative Verfahren zur Prozessverbesserung. Six Sigma. DMAIC-Verfahren
30.09.2011 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS ISO 13053-2:2011
Quantitative Verfahren zur Prozessverbesserung. Six Sigma. Werkzeuge und Techniken
30.09.2011 - PDF - Englisch - BSI
mehr dazu348,00 € -
NF ISO 2859-1/A1, X06-022-1/A1 (09/2011)
Annahmesstichprobenprüfung anhand der Anzahl fehlerhafter Einheiten oder Fehler (Attributprüfung) - Teil 1 : Nach der annehmbaren Qualitätsgrenzlage (AQL) geordnete
01.09.2011 - Paper - Französisch - AFNOR
mehr dazu25,67 € -
BS ISO 3951-4:2011
Verfahren für die Stichprobenprüfung anhand von quantitativen Merkmalen (Variablenprüfung). Verfahren für die Beurteilung deklarierter Qualitätsgrenzlagen
31.08.2011 - PDF - Englisch - BSI
mehr dazu293,00 € -
JIS Z 8462-5:2011 (R2016)
Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
22.08.2011 - PDF - Japanisch - JSA
mehr dazu25,00 € -
ISO 13053-1:2011 (R2022)
Quantitative methods in process improvement
Six Sigma
17.08.2011 - Paper - Französisch - ISO
mehr dazu174,00 € -
ISO 13053-2:2011 (R2022)
Quantitative methods in process improvement
Six Sigma
17.08.2011 - Paper - Französisch - ISO
mehr dazu199,00 € -
BS EN 60300-3-12:2011
Zuverlässigkeitsmanagement. Anwendungsleitfaden. Integrierte logistische Unterstützung
31.07.2011 - PDF - Englisch - BSI
mehr dazu348,00 € -
BS 6001-1:1999+A1:2011
Sampling procedures for inspection by attributes schemes indexed acceptance quality limit (AQL) lot-by-lot
31.07.2011 - PDF - Englisch - BSI
mehr dazu377,00 € -
ISO/TR 12888:2011 (R2017)
Selected illustrations of gauge repeatability and reproducibility studies
General information
21.07.2011 - Paper - Französisch - ISO
mehr dazu199,00 € -
ISO 2859-1:1999/Amd 1:2011
Sampling procedures for inspection by attributes
Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
17.06.2011 - Paper - Französisch - ISO
mehr dazu21,00 € -
PD ISO/TR 12845:2010
Ausgewählte Beispiele für fraktionelle faktorielle Versuche
30.04.2011 - PDF - Englisch - BSI
mehr dazu377,00 € -
NF X06-091 (04/2011)
Lean, Six Sigma und Lean Six Sigma Methoden - Anforderungen an die Zuständigkeiten der Projektleader für Verbesserung und der Workshop-Leiter
01.04.2011 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
JIS Z 9015-3:2011 (R2015)
Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
22.03.2011 - PDF - Japanisch - JSA
mehr dazu41,86 € -
IEC 60300-3-12:2011
Zuverlässigkeitsmanagement - Teil 3-12: Anwendungsleitfaden - Integrierte logistische Unterstützung
17.02.2011 - PDF - Englisch, Französisch - IEC
mehr dazu345,00 € -
FD ISO/TR 14468, X06-122 (02/2011)
Ausgewählte Erläuterungen der Übereinstimmungsanalyse bei attributiven Merkmalen
01.02.2011 - Paper - Französisch - AFNOR
mehr dazu108,33 € -
DD ISO/TS 28037:2010
Ermittlung und Anwendung gradliniger Kalibrierfunktionen
31.01.2011 - PDF - Englisch - BSI
mehr dazu377,00 € -
ASTM E2819-11(2021)
Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
01.01.2011 - PDF - Englisch - ASTM
mehr dazu74,00 € -
ISO/TR 14468:2010 (R2017)
Selected illustrations of attribute agreement analysis
General information
07.12.2010 - Paper - Französisch - ISO
mehr dazu199,00 € -
BS ISO 16269-4:2010
Statistische Auswertung von Daten. Entdeckung und Behandlung von Ausreißern
31.10.2010 - PDF - Englisch - BSI
mehr dazu348,00 € -
36,97 €
-
58,77 €
-
ISO 11462-2:2010 (R2016)
Guidelines for implementation of statistical process control (SPC)
Part 2: Catalogue of tools and techniques
10.09.2010 - Paper - Französisch - ISO
mehr dazu72,00 € -
167,33 €
-
ISO/TS 28037:2010 (R2014)
Determination and use of straight-line calibration functions
General information
30.08.2010 - Paper - Französisch - ISO
mehr dazu223,00 € -
DIN ISO 11843-5:2010-08
Erkennungsfähigkeit - Teil 5: Verfahren in den Fällen der linearen und der nicht-linearen Kalibrierung (ISO 11843-5:2008), Text Deutsch und Englisch
01.08.2010 - PDF - Englisch, Deutsch - DIN
mehr dazu85,79 € -
BS IEC 60605-6:2007
Prüfungen der Zuverlässigkeit von Geräten. Test auf Gültigkeit zeitlich konstanter Ausfallrate und Ausfalldichte sowie deren Schätzung
31.07.2010 - PDF - Englisch - BSI
mehr dazu331,00 € -
ISO/TR 12845:2010 (R2017)
Selected illustrations of fractional factorial screening experiments
General information
20.07.2010 - Paper - Französisch - ISO
mehr dazu223,00 € -
348,00 €
-
UNE-EN 61163-1:2010
Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots
07.04.2010 - PDF - Spanisch - AENOR
mehr dazu126,00 € -
UNE-EN 61163-1:2010
Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots
07.04.2010 - PDF - Englisch - AENOR
mehr dazu151,20 € -
BS ISO 24153:2009
Verfahren der Zufallsprobenahme. Qualitätslenkung und bestimmte Versuchsanordnungen
31.01.2010 - PDF - Englisch - BSI
mehr dazu293,00 € -
DIN ISO 16269-8:2009-12
Statistische Auswertung von Daten - Teil 8: Ermittlung von Prognosebereichen (ISO 16269-8:2004), Text Deutsch und Englisch
01.12.2009 - PDF - Englisch, Deutsch - DIN
mehr dazu234,02 € -
PD ISO/TR 29901:2007
Selected illustrations of full factorial experiments with four factors
30.11.2009 - PDF - Englisch - BSI
mehr dazu348,00 € -
DIN ISO 3534-1:2009-10
Statistik - Begriffe und Formelzeichen - Teil 1: Wahrscheinlichkeit und allgemeine statistische Begriffe (ISO 3534-1:2006), Text Deutsch und Englisch
01.10.2009 - PDF - Englisch, Deutsch - DIN
mehr dazu179,72 € -
180,00 €
-
BS ISO 5725-5:1998
Accuracy (trueness and precision) of measurement methods results Alternative for the determination precision a standard method
31.08.2009 - PDF - Englisch - BSI
mehr dazu348,00 € -
13,59 €
-
13,59 €
-
75,60 €
-
DIN EN 61649:2009-03
Weibull-Analyse (IEC 61649:2008), Deutsche Fassung EN 61649:2008
01.03.2009 - PDF - Deutsche - DIN
mehr dazu174,39 € -
377,00 €
-
Apprentissage statistique
Reseaux de neurones. cartes topologiques. machines a vecteurs supports
02.10.2008 - Paper - Französisch - EYROLLES
mehr dazu49,29 € -
397,00 €
-
NF ISO 11843-5, X06-048-5 (07/2008)
Erkennungsfähigkeit - Teil 5 : Verfahren in den Fällen der linearen und der nicht-linearen Kalibrierung
01.07.2008 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
DIN ISO 11843-2 Berichtigung 1:2008-06
Erkennungsfähigkeit - Teil 2: Verfahren im Fall der linearen Kalibrierung (ISO 11843-2:2000), Berichtigungen zu DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007, Text Deutsch, Englisch)
01.06.2008 - PDF - Deutsche - DIN
mehr dazu0,00 € -
FD X06-090 (06/2008) (R2013)
Statistik-Werkzeuge - Six Sigma, eine Verbesserungsmethodik mittels Statistik-Werkzeuge
01.06.2008 - Paper - Französisch - AFNOR
mehr dazu119,00 € -
BS 5702-3:2008
Guide to statistical process control (SPC) charts for variables Charting techniques short runs and small mixed batches
30.04.2008 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS 5702-2:2008
Guide to statistical process control (SPC) charts for variables Charts individual values
30.04.2008 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS ISO 11843-2:2000
Capability of detection Methodology in the linear calibration case
31.03.2008 - PDF - Englisch - BSI
mehr dazu293,00 € -
293,00 €
-
XP CEN/TS 12169, B53-625 (02/2008)
Kriterien zur Konformitätsprüfung eines Loses Schnittholz
01.02.2008 - Paper - Französisch - AFNOR
mehr dazu73,23 € -
BS EN 60706-5:2007
Instandhaltbarkeit von Geräten. Prüfbarkeit und diagnostisches Prüfen
31.01.2008 - PDF - Englisch - BSI
mehr dazu348,00 € -
JIS Z 8405:2008 (R2017)
Statistical methods for use in proficiency testing by interlaboratory comparisons
20.01.2008 - PDF - Japanisch - JSA
mehr dazu58,50 € -
82,46 €
-
ISO 11843-2:2000/Cor 1:2007
Capability of detection
Part 2: Methodology in the linear calibration case
23.10.2007 - Paper - Französisch - ISO
mehr dazu0,00 € -
DIN ISO 2859-3:2007-10
Annahmestichprobenprüfung anhand der Anzahl fehlerhafter Einheiten oder Fehler (Attributprüfung) - Teil 3: Skip-Lot-Verfahren (ISO 2859-3:2005), Text Deutsch, Englisch
01.10.2007 - PDF - Englisch, Deutsch - DIN
mehr dazu141,96 € -
IEC 60706-5:2007
IEC 60706-5:2007 Maintainability of equipment - Part 5: Testability and diagnostic testing
10.09.2007 - PDF - Englisch, Französisch - IEC
mehr dazu397,00 € -
BS EN 61163-1:2006
Zuverlässigkeitsvorbehandlung durch Beanspruchung. Instandsetzbare Baugruppen, losweise gefertigt
31.08.2007 - PDF - Englisch - BSI
mehr dazu377,00 € -
DIN ISO 16269-7:2007-08
Statistische Auswertung von Daten - Teil 7: Median - Punktschätzung und Vertrauensbereiche (ISO 16269-7:2001), Text Deutsch, Englisch
01.08.2007 - PDF - Englisch, Deutsch - DIN
mehr dazu92,62 € -
IEC 60605-6:2007
Prüfungen der Zuverlässigkeit von Geräten - Teil 6: Test auf Gültigkeit zeitlich konstanter Ausfallrate und Ausfalldichte sowie deren Schätzung
15.05.2007 - PDF - Englisch, Französisch - IEC
mehr dazu311,00 € -
UNE-EN 61165:2006
Application of Markov techniques (IEC 61165:2006). (Endorsed by AENOR in May of 2007.)
01.05.2007 - PDF - Englisch - AENOR
mehr dazu74,00 € -
BS 8496:2007
Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
31.01.2007 - PDF - Englisch - BSI
mehr dazu250,00 € -
NF ISO 3534-1, X06-002-1 (01/2007)
Statistik - Begriffe und Formelzeichein - Teil 1 : Wahrscheinlichkeit und allgemeine statistiche Begriffe
01.01.2007 - Paper - Englisch, Französisch - AFNOR
mehr dazu151,50 € -
NF ISO 3534-2, X06-002-2 (12/2006)
Statistik - Begriffe und Formelzeichen - Teil 2 : Angewandte Statistik
01.12.2006 - Paper - Englisch, Französisch - AFNOR
mehr dazu168,00 € -
BS ISO 3534-1:2006
Statistik. Begriffe und Formelzeichen. Wahrscheinlichkeit und allgemeine statistische Begriffe
30.11.2006 - PDF - Englisch - BSI
mehr dazu398,00 € -
BS ISO 3534-2:2006
Statistik. Begriffe und Formelzeichen. Angewandte Statistik
30.11.2006 - PDF - Englisch - BSI
mehr dazu449,00 € -
JIS Z 9015-1:2006 (R2016)
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
20.11.2006 - PDF - Japanisch - JSA
mehr dazu62,66 € -
JIS Z 8462-4:2006 (R2016)
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
20.11.2006 - PDF - Japanisch - JSA
mehr dazu36,27 € -
BS 6001-4:2005
Sampling procedures for inspection by attributes System of sequential sampling plans indexed acceptance quality limit (AQL) lot-by-lot
30.06.2006 - PDF - Englisch - BSI
mehr dazu348,00 € -
IEC 61163-1:2006
Zuverlässigkeitsbehandlung durch Beanspruchung - Teil 1: Instandsetzbare Baugruppen, losweise gefertigt
26.06.2006 - PDF - Englisch, Französisch - IEC
mehr dazu397,00 € -
DIN ISO 11843-2:2006-06
Erkennungsfähigkeit - Teil 2: Verfahren im Fall der linearen Kalibrierung (ISO 11843-2:2000, Text Deutsch, Englisch)
01.06.2006 - PDF - Englisch, Deutsch - DIN
mehr dazu110,00 € -
DIN ISO 11843-3:2006-06
Erkennungsfähigkeit - Teil 3: Verfahren zur Ermittlung der Erkennungsgrenze, wenn keine Kalibrierdaten angewendet werden (ISO 11843-3:2003, Text Deutsch, Englisch)
01.06.2006 - PDF - Englisch, Deutsch - DIN
mehr dazu85,79 € -
DIN ISO 11843-4:2006-06
Erkennungsfähigkeit - Teil 4: Verfahren zum Vergleichen des Erfassungsvermögens mit einem vorgegebenen Wert (ISO 11843-4:2003, Text Deutsch, Englisch)
01.06.2006 - PDF - Englisch, Deutsch - DIN
mehr dazu79,72 € -
BS 6002-4:2006
Verfahren fuer die Stichprobenpruefung anhand quantitativer Merkmale (Variablenpruefung). System sequenzieller Stichprobenanweisungen, geordnet nach der annehmbaren Qualitaetsgrenzlage (AQL) fuer losweise Pruefung. Unabhaengige Qualitaetsmerkmale)
31.05.2006 - PDF - Englisch - BSI
mehr dazu331,00 € -
BS EN 61754-13:2006
Steckgesichter von Lichtwellenleiter-Steckverbindern. Bauart FC-PC Steckverbinderfamilie
31.05.2006 - PDF - Englisch - BSI
mehr dazu180,00 € -
IEC 61165:2006
IEC 61165:2006 Application of Markov techniques
18.05.2006 - PDF - Englisch, Französisch - IEC
mehr dazu270,00 € -
DIN ISO 11648-1:2006-04
Statistische Aspekte der Probenahme von Massengütern - Teil 1: Allgemeine Grundlagen (ISO 11648-1:2003)
01.04.2006 - PDF - Englisch, Deutsch - DIN
mehr dazu272,06 € -
124,95 €
-
JIS Z 8101-3/AMENDMENT 1:2006 (R2015)
Statistics - Vocabulary and symbols - Part 3: Design of experiments (Amendment 1)
20.01.2006 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS Z 8462-3:2006 (R2015)
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
20.01.2006 - PDF - Japanisch - JSA
mehr dazu25,00 € -
UNE-EN 60300-3-1:2005
Dependability management -- Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
14.12.2005 - PDF - Spanisch - AENOR
mehr dazu110,00 € -
UNE-EN 60300-3-1:2005
Dependability management -- Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
14.12.2005 - PDF - Englisch - AENOR
mehr dazu132,00 € -
20,38 €
-
PD ISO/TR 22971:2005
Praktischer Leitfaden fuer ISO 5725-2:1994. Genauigkeit (Richtigkeit und Praezision) von Messverfahren und Messergebnissen. Grundlegende Methode fuer die Ermittlung der Wiederhol- und Vergleichpraezision eines vereinheitlichten Messverfahrens
31.10.2005 - PDF - Englisch - BSI
mehr dazu293,00 € -
UNE-EN 62309:2005
Dependability of products containing reused parts - Requirements for functionality and tests
05.10.2005 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN 62309:2005
Dependability of products containing reused parts - Requirements for functionality and tests
05.10.2005 - PDF - Englisch - AENOR
mehr dazu81,60 € -
NF ISO 2859-3, X06-022-3 (10/2005)
Annahmestichprobenprüfung anhand der Anzahl fehlerhafter Einheiten oder Fehler (Attributprüfung) - Teil 3 : skip-Lot-Verfahren
01.10.2005 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
NF ISO 2859-5, X06-022-5 (10/2005)
Annahmestichprobenprüfung anhand der Anzahl fehlerhafter Einheiten oder Fehler (Attributprüfung) - Teil 5 : system sequenzieller Stichprobenpläne für losweise Prüfung, geordnet nach der annehmbaren Qualitätsgrenzlage (AQL)
01.10.2005 - Paper - Französisch - AFNOR
mehr dazu130,67 € -
NF EN 60300-3-1, C20-300-3-1 (08/2005)
Zuverlässigkeitsmanagement - Teil 3-1 : Anwendungsleitfaden - Verfahren zur Analyse der Zuverlässigkeit - Leitfaden zur Methodik
01.08.2005 - Paper - Französisch - AFNOR
mehr dazu170,00 € -
BS 6000-3:2005
Guide to the selection and usage of acceptance sampling systems for inspection discrete items in lots by variables
27.07.2005 - PDF - Englisch - BSI
mehr dazu331,00 € -
BS 6000-1:2005
Guide to the selection and usage of acceptance sampling systems for inspection discrete items in lots General guide
25.07.2005 - PDF - Englisch - BSI
mehr dazu293,00 € -
BS 6000-2:2005
Guide to the selection and usage of acceptance sampling systems for inspection discrete items in lots by attributes
25.07.2005 - PDF - Englisch - BSI
mehr dazu180,00 € -
ISO 2859-5:2005 (R2019)
Sampling procedures for inspection by attributes
Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
27.06.2005 - Paper - Französisch - ISO
mehr dazu199,00 € -
BS 6001-3:2005
Sampling procedures for inspection by attributes Specification skip-lot sampling
23.06.2005 - PDF - Englisch - BSI
mehr dazu293,00 €