Industrie
-
UNE-EN ISO 17268:2022
Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2020)
22.06.2022 - PDF - Spanisch - AENOR
mehr dazu99,00 € -
UNE-EN ISO 17268:2022
Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2020)
22.06.2022 - PDF - Englisch - AENOR
mehr dazu118,80 € -
UNE-EN 17127:2022
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
15.06.2022 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN 17127:2022
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
15.06.2022 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 41014:2021
Facility management - Development of facility management strategy (ISO 41014:2020)
03.11.2021 - PDF - Spanisch - AENOR
mehr dazu103,00 € -
UNE-EN ISO 41014:2021
Facility management - Development of facility management strategy (ISO 41014:2020)
03.11.2021 - PDF - Englisch - AENOR
mehr dazu123,60 € -
UNE-EN 17533:2021
Gaseous hydrogen - Cylinders and tubes for stationary storage
26.05.2021 - PDF - Spanisch - AENOR
mehr dazu126,00 € -
UNE-EN 17533:2021
Gaseous hydrogen - Cylinders and tubes for stationary storage
26.05.2021 - PDF - Englisch - AENOR
mehr dazu151,20 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27.01.2021 - PDF - Spanisch - AENOR
mehr dazu98,00 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27.01.2021 - PDF - Englisch - AENOR
mehr dazu117,60 € -
UNE-EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
01.08.2020 - PDF - Englisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
01.07.2020 - PDF - Englisch - AENOR
mehr dazu94,00 € -
UNE-EN ISO 16610-29:2020
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
01.07.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu69,00 € -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
04.03.2020 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
04.03.2020 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
01.02.2020 - PDF - Englisch - AENOR
mehr dazu15,00 € -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
02.10.2019 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
02.10.2019 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN ISO 41012:2019
Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)
22.05.2019 - PDF - Spanisch - AENOR
mehr dazu124,00 € -
UNE-EN ISO 41012:2019
Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)
22.05.2019 - PDF - Englisch - AENOR
mehr dazu148,80 € -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
27.03.2019 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
27.03.2019 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
27.03.2019 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
27.03.2019 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
27.03.2019 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
27.03.2019 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
05.12.2018 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
05.12.2018 - PDF - Englisch - AENOR
mehr dazu85,20 € -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
05.12.2018 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
05.12.2018 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 41001:2018
Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
21.11.2018 - PDF - Spanisch - AENOR
mehr dazu109,00 € -
UNE-EN ISO 41001:2018
Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
21.11.2018 - PDF - Englisch - AENOR
mehr dazu130,80 € -
68,00 €
-
81,60 €
-
78,00 €
-
93,60 €
-
124,00 €
-
148,80 €
-
UNE-EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
01.03.2018 - PDF - Englisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 10156:2018
Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
31.01.2018 - PDF - Spanisch - AENOR
mehr dazu79,00 € -
UNE-EN ISO 10156:2018
Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
31.01.2018 - PDF - Englisch - AENOR
mehr dazu94,80 € -
UNE-EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
01.07.2017 - PDF - Englisch - AENOR
mehr dazu69,00 € -
UNE-EN ISO 18391:2016
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
01.05.2017 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 1101:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
01.04.2017 - PDF - Englisch - AENOR
mehr dazu168,00 € -
UNE-EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
01.04.2017 - PDF - Englisch - AENOR
mehr dazu87,00 € -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
01.03.2017 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
01.03.2017 - PDF - Englisch - AENOR
mehr dazu85,20 € -
UNE-EN ISO 3040:2016
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
14.12.2016 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 3040:2016
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
14.12.2016 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN 13269:2016
Maintenance - Guideline on preparation of maintenance contracts
23.11.2016 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN 13269:2016
Maintenance - Guideline on preparation of maintenance contracts
23.11.2016 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 1938-1:2015
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
01.02.2016 - PDF - Englisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015) (Endorsed by AENOR in February of 2016.)
01.02.2016 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN 16636:2015 (R2022)
Pest management services - Requirements and competences
18.11.2015 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN 16636:2015 (R2022)
Pest management services - Requirements and competences
18.11.2015 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN ISO 17450-1:2015
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
04.11.2015 - PDF - Spanisch - AENOR
mehr dazu112,00 € -
UNE-EN ISO 17450-1:2015
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
04.11.2015 - PDF - Englisch - AENOR
mehr dazu134,40 € -
UNE-EN ISO 14253-5:2015
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)
01.11.2015 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 17450-2:2015
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
28.10.2015 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 17450-2:2015
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
28.10.2015 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 16610-22:2015
Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) (Endorsed by AENOR in September of 2015.)
01.09.2015 - PDF - Englisch - AENOR
mehr dazu66,00 € -
UNE-EN ISO 16610-61:2015
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) (Endorsed by AENOR in September of 2015.)
01.09.2015 - PDF - Englisch - AENOR
mehr dazu66,00 € -
UNE-EN ISO 16610-41:2015
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) (Endorsed by AENOR in September of 2015.)
01.09.2015 - PDF - Englisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 25178-606:2015
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
01.09.2015 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 16610-40:2015
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) (Endorsed by AENOR in August of 2015.)
01.08.2015 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 16610-49:2015
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) (Endorsed by AENOR in August of 2015.)
01.08.2015 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 16610-1:2015
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) (Endorsed by AENOR in July of 2015.)
01.07.2015 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 16610-20:2015
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) (Endorsed by AENOR in July of 2015.)
01.07.2015 - PDF - Englisch - AENOR
mehr dazu64,00 € -
UNE-EN ISO 2538-1:2015
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
24.06.2015 - PDF - Spanisch - AENOR
mehr dazu58,00 € -
UNE-EN ISO 2538-1:2015
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
24.06.2015 - PDF - Englisch - AENOR
mehr dazu69,60 € -
UNE-EN ISO 2538-2:2015
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
24.06.2015 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 2538-2:2015
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
24.06.2015 - PDF - Englisch - AENOR
mehr dazu75,60 € -
UNE-EN ISO 10579:2015
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
17.06.2015 - PDF - Spanisch - AENOR
mehr dazu52,00 € -
UNE-EN ISO 10579:2015
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
17.06.2015 - PDF - Englisch - AENOR
mehr dazu62,40 € -
74,00 €
-
88,80 €
-
UNE-EN ISO 14638:2015
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) (Endorsed by AENOR in March of 2015.)
01.03.2015 - PDF - Englisch - AENOR
mehr dazu69,00 € -
UNE-ISO 16110-1:2015 (R2021)
Hydrogen generators using fuel processing technologies -- Part 1: Safety
28.01.2015 - PDF - Spanisch - AENOR
mehr dazu126,00 € -
UNE-EN ISO 16610-71:2014
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) (Endorsed by AENOR in January of 2015.)
01.01.2015 - PDF - Englisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 25178-604:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
01.01.2015 - PDF - Englisch - AENOR
mehr dazu80,00 € -
UNE-EN ISO 25178-603:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
01.01.2015 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 10360-9:2013
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) (Endorsed by AENOR in January of 2015.)
01.01.2015 - PDF - Englisch - AENOR
mehr dazu66,00 € -
UNE-EN ISO 25178-70:2014
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
01.01.2015 - PDF - Englisch - AENOR
mehr dazu78,00 € -
UNE-EN ISO 25178-605:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
01.01.2015 - PDF - Englisch - AENOR
mehr dazu74,00 € -
UNE-CEN ISO/TS 8062-2:2013
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013) (Endorsed by AENOR in January of 2014.)
01.01.2014 - PDF - Englisch - AENOR
mehr dazu96,00 € -
UNE-EN ISO 14253-2:2012/AC:2013
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
20.11.2013 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 14253-2:2012/AC:2013
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
20.11.2013 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 286-1:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
20.11.2013 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 286-1:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
20.11.2013 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 286-2:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
20.11.2013 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 286-2:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
20.11.2013 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 16610-85:2013
Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) (Endorsed by AENOR in October of 2013.)
01.10.2013 - PDF - Englisch - AENOR
mehr dazu71,00 € -
UNE-EN ISO 5436-2:2012
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) (Endorsed by AENOR in October of 2013.)
01.10.2013 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
08.05.2013 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
08.05.2013 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
08.05.2013 - PDF - Spanisch - AENOR
mehr dazu71,00 € -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
08.05.2013 - PDF - Englisch - AENOR
mehr dazu85,20 € -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
08.05.2013 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
08.05.2013 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
19.12.2012 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
19.12.2012 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
14.11.2012 - PDF - Spanisch - AENOR
mehr dazu104,00 € -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
14.11.2012 - PDF - Englisch - AENOR
mehr dazu124,80 € -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
03.10.2012 - PDF - Spanisch - AENOR
mehr dazu126,00 € -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
03.10.2012 - PDF - Englisch - AENOR
mehr dazu151,20 € -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
03.10.2012 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
03.10.2012 - PDF - Englisch - AENOR
mehr dazu75,60 € -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
25.07.2012 - PDF - Spanisch - AENOR
mehr dazu124,00 € -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
25.07.2012 - PDF - Englisch - AENOR
mehr dazu148,80 € -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
11.07.2012 - PDF - Spanisch - AENOR
mehr dazu53,00 € -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
11.07.2012 - PDF - Englisch - AENOR
mehr dazu63,60 € -
UNE-EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) (Endorsed by AENOR in July of 2012.)
01.07.2012 - PDF - Englisch - AENOR
mehr dazu66,00 € -
UNE-EN ISO 22432:2011
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) (Endorsed by AENOR in July of 2012.)
01.07.2012 - PDF - Englisch - AENOR
mehr dazu90,00 € -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
20.06.2012 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
20.06.2012 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
13.06.2012 - PDF - Spanisch - AENOR
mehr dazu87,00 € -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
13.06.2012 - PDF - Englisch - AENOR
mehr dazu104,40 € -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
06.06.2012 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
06.06.2012 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
06.06.2012 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
06.06.2012 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN 15331:2012 (R2017)
Criteria for design, management and control of maintenance services for buildings
22.02.2012 - PDF - Spanisch - AENOR
mehr dazu69,00 € -
UNE-EN 15331:2012 (R2017)
Criteria for design, management and control of maintenance services for buildings
22.02.2012 - PDF - Englisch - AENOR
mehr dazu82,80 € -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
15.02.2012 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
15.02.2012 - PDF - Englisch - AENOR
mehr dazu75,60 € -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
08.02.2012 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
08.02.2012 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
08.02.2012 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
08.02.2012 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 3611:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
01.02.2012 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN ISO 3611:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
01.02.2012 - PDF - Englisch - AENOR
mehr dazu84,00 € -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
01.02.2012 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
01.02.2012 - PDF - Englisch - AENOR
mehr dazu84,00 € -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
01.02.2012 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
01.02.2012 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
01.02.2012 - PDF - Spanisch - AENOR
mehr dazu63,00 € -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
01.02.2012 - PDF - Englisch - AENOR
mehr dazu75,60 € -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
01.02.2012 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
01.02.2012 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
01.02.2012 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
01.02.2012 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE 151001:2011
Maintenance. Maintainability indicators for industrial devices. Definition and assessment
20.07.2011 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
11.05.2011 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
11.05.2011 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
11.05.2011 - PDF - Spanisch - AENOR
mehr dazu77,00 € -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
11.05.2011 - PDF - Englisch - AENOR
mehr dazu92,40 € -
UNE-EN ISO 25178-701:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
11.05.2011 - PDF - Spanisch - AENOR
mehr dazu74,00 € -
UNE-EN ISO 25178-701:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
11.05.2011 - PDF - Englisch - AENOR
mehr dazu88,80 € -
UNE-EN ISO 286-2:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
02.03.2011 - PDF - Spanisch - AENOR
mehr dazu99,00 € -
UNE-EN ISO 286-2:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
02.03.2011 - PDF - Englisch - AENOR
mehr dazu118,80 € -
UNE-EN ISO 286-1:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
23.02.2011 - PDF - Spanisch - AENOR
mehr dazu85,00 € -
UNE-EN ISO 286-1:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
23.02.2011 - PDF - Englisch - AENOR
mehr dazu102,00 € -
UNE-EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
15.12.2010 - PDF - Spanisch - AENOR
mehr dazu77,00 € -
UNE-EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
15.12.2010 - PDF - Englisch - AENOR
mehr dazu92,40 € -
UNE-EN ISO 25178-6:2010
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
15.12.2010 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 25178-6:2010
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
15.12.2010 - PDF - Englisch - AENOR
mehr dazu72,00 € -
76,00 €
-
70,00 €
-
84,00 €
-
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
18.11.2009 - PDF - Spanisch - AENOR
mehr dazu104,00 € -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
18.11.2009 - PDF - Englisch - AENOR
mehr dazu124,80 € -
UNE-EN 60706-3:2009
Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
09.09.2009 - PDF - Spanisch - AENOR
mehr dazu84,00 € -
UNE-EN 60706-3:2009
Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
09.09.2009 - PDF - Englisch - AENOR
mehr dazu100,80 € -
UNE-EN ISO 14175:2009
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
20.05.2009 - PDF - Spanisch - AENOR
mehr dazu57,00 € -
UNE-EN ISO 14175:2009
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
20.05.2009 - PDF - Englisch - AENOR
mehr dazu68,40 € -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
29.04.2009 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
29.04.2009 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
29.04.2009 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
29.04.2009 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
04.03.2009 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
04.03.2009 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
20.09.2006 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
20.09.2006 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
17.12.2004 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
17.12.2004 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE 26505:2004 (R2012)
Road vehicles. Liquid hydrogen. Land vehicle fuelling system interface.
07.04.2004 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
20.11.2002 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
20.11.2002 - PDF - Englisch - AENOR
mehr dazu84,00 € -
UNE-EN 13549:2002 (R2019)
Cleaning services - Basic requirements and recommendations for quality measuring systems.
22.02.2002 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN 13549:2002 (R2019)
Cleaning services - Basic requirements and recommendations for quality measuring systems.
22.02.2002 - PDF - Englisch - AENOR
mehr dazu84,00 € -
UNE-EN ISO 3650:2001 ERRATUM (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS. (ISO 3650:1998)
17.12.2001 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
17.12.2001 - PDF - Spanisch - AENOR
mehr dazu76,00 € -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
17.12.2001 - PDF - Englisch - AENOR
mehr dazu91,20 € -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
22.05.2001 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
22.05.2001 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
30.04.2001 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
30.04.2001 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
28.02.2000 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
28.02.2000 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
21.01.2000 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
21.01.2000 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
11.08.1998 - PDF - Spanisch - AENOR
mehr dazu57,00 € -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
11.08.1998 - PDF - Englisch - AENOR
mehr dazu68,40 € -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
18.06.1998 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
18.06.1998 - PDF - Englisch - AENOR
mehr dazu81,60 €