Geometrische Produktspezifikation (GPS)
Die Geometrische Produktspezifikation (GPS) ist eine Standardmethode, die darauf abzielt, für ein Teil zu definieren, was für seine geometrischen und funktionalen Eigenschaften als gut zulässig ist. Diese Spezifikationen können Form, Abmessungen, Oberflächenbeschaffenheit usw. dieses Zimmers.
Der ICS-Code 17.040.40 fasst alle Standards zum Thema zusammen!
|
Für welche Branchen :
- Automobil
- Luftfahrt
- Eisenbahn
Finden Sie unsere Auswahl :
|
|
-
DD CEN ISO/TS 14253-4:2010
Geometrische Produktspezifikationen (GPS). Prüfung von Werkstücken und Messgeräten durch Messen. Grundlagen für Funktionsgrenzen und Spezifikationsgrenzen in Entscheidungsregeln
30.06.2010 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN EN ISO 10360-2:2010-06
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 2: KMG angewendet für Längenmessungen (ISO 10360-2:2009), Deutsche Fassung EN ISO 10360-2:2009
01.06.2010 - PDF - Deutsche - DIN
mehr dazu104,95 € -
DIN EN ISO 10360-2:2010-06
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 2: KMG angewendet für Längenmessungen (ISO 10360-2:2009)
01.06.2010 - PDF - Englisch - DIN
mehr dazu131,40 € -
DIN EN ISO 25178-6:2010-06
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft - Teil 6: Klassifizierung von Methoden zur Messung der Oberflächenbeschaffenheit (ISO 25178-6:2010), Deutsche Fassung EN ISO 25178-6:2010
01.06.2010 - PDF - Deutsche - DIN
mehr dazu72,80 € -
DIN EN ISO 25178-6:2010-06
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft - Teil 6: Klassifizierung von Methoden zur Messung der Oberflächenbeschaffenheit (ISO 25178-6:2010)
01.06.2010 - PDF - Englisch - DIN
mehr dazu91,12 € -
BS EN ISO 25178-6:2010
Geometrische Produktspezifikation (GPS). Oberflächenbeschaffenheit. Flächenhaft. Klassifizierung von Methoden zur Messung der Oberflächenbeschaffenheit
31.05.2010 - PDF - Englisch - BSI
mehr dazu180,00 € -
NF EN ISO 25178-6, E05-031-6 (05/2010)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit : Flächenhaft - Teil 6 : Klassifizierungsverfahren von Methoden zur Messung der Oberflächenbeschaffenheit
01.05.2010 - Paper - Französisch - AFNOR
mehr dazu58,33 € -
DIN EN ISO 10135:2010-02
Geometrische Produktspezifikation (GPS) - Zeichnungsangaben für Formteile in der technischen Produktdokumentation (TPD) (ISO 10135:2007), Deutsche Fassung EN ISO 10135:2009
01.02.2010 - PDF - Deutsche - DIN
mehr dazu141,96 € -
DIN EN ISO 10135:2010-02
Geometrische Produktspezifikation (GPS) - Zeichnungsangaben für Formteile in der technischen Produktdokumentation (TPD) (ISO 10135:2007)
01.02.2010 - PDF - Englisch - DIN
mehr dazu177,38 € -
BS EN ISO 10360-2:2009
Geometrische Produktspezifikation (GPS). Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG). KMG angewendet für Längenmessungen
31.01.2010 - PDF - Englisch - BSI
mehr dazu293,00 € -
NF EN ISO 10360-2, E11-150-2 (01/2010)
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 2 : KMG angewendet für längenmessungen
01.01.2010 - Paper - Französisch - AFNOR
mehr dazu99,00 € -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
18.11.2009 - PDF - Spanisch - AENOR
mehr dazu104,00 € -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
18.11.2009 - PDF - Englisch - AENOR
mehr dazu124,80 € -
DIN EN ISO 12085 Berichtigung 1:2009-09
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Motifkenngrößen (ISO 12085:1996), Deutsche Fassung EN ISO 12085:1997, Berichtigung zu DIN EN ISO 12085:1998-05, Deutsche Fassung EN ISO 12085:1997/AC:2008
01.09.2009 - PDF - Deutsche - DIN
mehr dazu0,00 € -
DIN EN ISO 12085 Berichtigung 1:2009-09
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Motifkenngrößen (ISO 12085:1996), Berichtigung 1 zur englischen Übersetzung DIN EN ISO 12085:1998-05
01.09.2009 - PDF - Englisch - DIN
mehr dazu0,00 € -
BS EN ISO 12085:1997
Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters
31.07.2009 - PDF - Englisch - BSI
mehr dazu180,00 € -
DIN EN ISO 463 Berichtigung 1:2009-07
Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Konstruktionsmerkmale und messtechnische Merkmale für mechanische Messuhren (ISO 463:2006), Deutsche Fassung EN ISO 463:2006, Berichtigung zu DIN EN ISO 463:2006-06, Deutsche Fassung EN ISO 463:2006/AC:2009
01.07.2009 - PDF - Deutsche - DIN
mehr dazu0,00 € -
DIN EN ISO 463 Berichtigung 1:2009-07
Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Konstruktionsmerkmale und messtechnische Merkmale für mechanische Messuhren (ISO 463:2006), Berichtigung 1 zur englischen Fassung DIN EN ISO 463:2006-06
01.07.2009 - PDF - Englisch - DIN
mehr dazu0,00 € -
BS EN ISO 10135:2009
Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
31.05.2009 - PDF - Englisch - BSI
mehr dazu348,00 € -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
29.04.2009 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
29.04.2009 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
29.04.2009 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
29.04.2009 - PDF - Englisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
04.03.2009 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
04.03.2009 - PDF - Englisch - AENOR
mehr dazu81,60 € -
DIN EN ISO 10360-6:2009-01
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 6: Fehlerabschätzung beim Berechnen zugeordneter Geometrieelemente nach Gauß (ISO 10360-6:2001+Cor. 1:2007), Deutsche Fassung EN ISO 10360-6:2001+AC:2008
01.01.2009 - PDF - Deutsche - DIN
mehr dazu85,79 € -
DIN EN ISO 10360-6:2009-01
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 6: Fehlerabschätzung beim Berechnen zugeordneter Geometrieelemente nach Gauß (ISO 10360-6:2001+Cor. 1:2007)
01.01.2009 - PDF - Englisch - DIN
mehr dazu107,48 € -
DD ISO/TS 15530-4:2008
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific using simulation
30.11.2008 - PDF - Englisch - BSI
mehr dazu293,00 € -
DIN 2250-1:2008-10
Geometrische Produktspezifikation (GPS) - Gutlehrringe und Einstellringe - Teil 1: Von 1 mm bis 315 mm Nenndurchmesser
01.10.2008 - PDF - Deutsche - DIN
mehr dazu52,90 € -
DIN 2250-1:2008-10
Geometrische Produktspezifikation (GPS) - Gutlehrringe und Einstellringe - Teil 1: Von 1 mm bis 315 mm Nenndurchmesser
01.10.2008 - PDF - Englisch - DIN
mehr dazu66,07 € -
DIN ISO/TS 23165:2008-08
Geometrische Produktspezifikation (GPS) - Leitfaden zur Ermittlung der Testunsicherheit von Koordinatenmessgeräten (KMG) (ISO/TS 23165:2006)
01.08.2008 - PDF - Deutsche - DIN
mehr dazu110,00 € -
BS EN ISO 10360-6:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
31.07.2008 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN 2231:2008-07
Geometrische Produktspezifikation (GPS) - Grenzrachenlehren und geschmiedete Lehrenkörper über 3 mm bis 100 mm Nennmaß
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2232:2008-07
Geometrische Produktspezifikation (GPS) - Gutrachenlehren mit geschmiedetem Lehrenkörper über 3 mm bis 100 mm Nennmaß
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2233:2008-07
Geometrische Produktspezifikation (GPS) - Ausschussrachenlehren mit geschmiedetem Lehrenkörper über 3 mm bis 100 mm Nennmaß
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2245-1:2008-07
Geometrische Produktspezifikation (GPS) - Grenzlehrdorne - Teil 1: Für Bohrungen von 1 mm bis 40 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2245-2:2008-07
Geometrische Produktspezifikation (GPS) - Grenzlehrdorne - Teil 2: Für Bohrungen über 40 mm bis 65 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2246-1:2008-07
Geometrische Produktspezifikation (GPS) - Gutlehrdorne - Teil 1: Für Bohrungen von 1 mm bis 40 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2246-2:2008-07
Geometrische Produktspezifikation (GPS) - Gutlehrdorne - Teil 2: Für Bohrungen über 120 mm bis 200 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu22,99 € -
DIN 2246-3:2008-07
Geometrische Produktspezifikation (GPS) - Gutlehrdorne - Teil 3: Für Bohrungen über 40 mm bis 120 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu22,99 € -
DIN 2247-1:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrdorne - Teil 1: Für Bohrungen von 1 mm bis 40 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2247-2:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrdorne - Teil 2: Mit Stichmaß für Bohrungen über 40 mm bis 500 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2247-3:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrdorne - Teil 3: Mit zylindrischem Lehrenkörper für Bohrungen über 40 mm bis 120 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2247-4:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrdorne - Teil 4: Mit abgeflachtem zylindrischem Lehrenkörper für Bohrungen über 120 mm bis 200 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu22,99 € -
DIN 2248-2:2008-07
Geometrische Produktspezifikation (GPS) - Gutlehrenkörper - Teil 2: Für Bohrungen über 40 mm bis 120 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2248-3:2008-07
Geometrische Produktspezifikation (GPS) - Gutlehrenkörper - Teil 3: Für Bohrungen über 120 mm bis 200 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2249-2:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrenkörper - Teil 2: Stichmaß für Bohrungen über 40 mm bis 500 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2249-3:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrenkörper - Teil 3: Abgeflachte zylindrische Lehrenkörper für Bohrungen über 120 mm bis 200 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2249-4:2008-07
Geometrische Produktspezifikation (GPS) - Ausschusslehrenkörper - Teil 4: Zylindrische Lehrenkörper für Bohrungen über 40 mm bis 120 mm Nenndurchmesser
01.07.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2285-1:2008-07
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrringe für Metrisches ISO-Gewinde - Teil 1: Gewinde-Nenndurchmesser von 1 mm bis 200 mm, allgemeine Anwendung
01.07.2008 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN 2285-1:2008-07
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrringe für Metrisches ISO-Gewinde - Teil 1: Gewinde-Nenndurchmesser von 1 mm bis 200 mm, allgemeine Anwendung
01.07.2008 - PDF - Englisch - DIN
mehr dazu57,57 € -
DIN 2259:2008-07
Geometrische Produktspezifikation (GPS) - Lehren für Rund- und Flachpassungen - Übersicht, Beschriftung, Kennzeichnung
01.07.2008 - PDF - Deutsche - DIN
mehr dazu65,89 € -
XP ISO/TS 15530-4, E11-158-4 (07/2008)
Geometrische Produktspezifikation (GPS) - Dreidimensionale Messmaschinen (CMM) : Methode zur Bestimmung der Messunsicherheit - Teil 4: Bewertung der eine Aufgabe kennzeichnenden Messunsicherheit durch Simulationen
01.07.2008 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
JIS B 1536-1:2008 (R2013)
Rolling bearings - Boundary dimensions and tolerances of needle roller bearings - Part 1: Dimension series 48, 49 and 69
20.04.2008 - PDF - Japanisch - JSA
mehr dazu25,00 € -
DIN EN ISO 8062-1:2008-01
Geometrische Produktspezifikation (GPS) - Maß-, Form- und Lagetoleranzen für Formteile - Teil 1: Begriffe (ISO 8062-1:2007), Dreisprachige Fassung EN ISO 8062-1:2007
01.01.2008 - PDF - Englisch, Französisch, Deutsch - DIN
mehr dazu104,95 € -
DIN 874-3:2008-01
Geometrische Produktspezifikation (GPS) - Lineale - Teil 3: Flachlineale aus Naturhartgestein, Maße, Technische Lieferbedingungen
01.01.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 875-2:2008-01
Geometrische Produktspezifikation (GPS) - Winkel 90° - Teil 2: Winkel 90° aus Naturhartgestein
01.01.2008 - PDF - Deutsche - DIN
mehr dazu32,34 € -
FD ISO/TR 16015, E10-001 (11/2007)
Geometrische Produktspezifikation (GPS) - Systematische Abweichungen und Beiträge zur Messunsicherheit bei Längenmessungen aufgrund thermischer Einflüsse
01.11.2007 - Paper - Französisch - AFNOR
mehr dazu108,00 € -
BS EN ISO 8062-1:2007
Geometrische Produktspezifikationen (GPS). Maß-, Form- und Lagetoleranzen für Formteile. Begriffe
31.10.2007 - PDF - Englisch - BSI
mehr dazu293,00 € -
DD ISO/TS 23165:2006
Geometrische Produktspezifikation (GPS). Verfahren zur Ermittlung der Messunsicherheit von Koordinatenmessgeräten (KMG), Leitfaden zur Ermittlung der Unsicherheit von Koordinatenmessgeräten
28.09.2007 - PDF - Englisch - BSI
mehr dazu293,00 € -
NF EN ISO 8062-1, A00-510-1 (08/2007)
Geometrische Produkspezifikationen (GPS) - Mass-, Form-und Lagetoleranzen für Formreile - Teil 1 : Begriffe
01.08.2007 - Paper - Englisch, Französisch - AFNOR
mehr dazu78,50 € -
JIS B 0680:2007 (R2016)
Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification
20.03.2007 - PDF - Japanisch - JSA
mehr dazu25,00 € -
DIN 866:2006-12
Geometrische Produktspezifikation (GPS) - Strichmaßstäbe, Arbeitsmaßstäbe - Ausführungen, Anforderungen
01.12.2006 - PDF - Deutsche - DIN
mehr dazu52,90 € -
DIN 2253:2006-12
Geometrische Produktspezifikation (GPS) - Prüflehren für Rachenlehren von 1 mm bis 315 mm Nennmaß
01.12.2006 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN 2239:2006-12
Geometrische Produktspezifikation (GPS) - Lehren der Längenprüftechnik - Anforderungen und Prüfung
01.12.2006 - PDF - Deutsche - DIN
mehr dazu45,98 € -
XP ISO/TS 23165, E11-170 (12/2006)
Geometrische Produktspezifikation (GPS) - Verfahren zur Ermittlung der Messunsicherheit von Koordinatenmessgeräten (KMG), Leitfaden zur Ermittlung der Unsicherheit von Koordinatenmessgeräten
01.12.2006 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
20.09.2006 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
20.09.2006 - PDF - Englisch - AENOR
mehr dazu81,60 € -
DIN EN ISO 463:2006-06
Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Konstruktionsmerkmale und messtechnische Merkmale für mechanische Messuhren (ISO 463:2006), Deutsche Fassung EN ISO 463:2006
01.06.2006 - PDF - Deutsche - DIN
mehr dazu79,72 € -
DIN EN ISO 463:2006-06
Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Konstruktionsmerkmale und messtechnische Merkmale für mechanische Messuhren (ISO 463:2006)
01.06.2006 - PDF - Englisch - DIN
mehr dazu99,44 € -
NF EN ISO 463, E11-050 (06/2006)
Geometrische Produktspezifikation (GPS) - Längenmessgeräte Konstruktionsmerkmale und messtechnische Merkmale für mechanische Messuhren
01.06.2006 - Paper - Französisch - AFNOR
mehr dazu75,50 € -
DIN 875-1:2005-07
Geometrische Produktspezifikation (GPS) - Winkel 90° - Teil 1: Stahlwinkel 90°
01.07.2005 - PDF - Deutsche - DIN
mehr dazu52,90 € -
JIS B 1509:2005 (R2014)
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
20.03.2005 - PDF - Japanisch - JSA
mehr dazu25,00 € -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
17.12.2004 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
17.12.2004 - PDF - Englisch - AENOR
mehr dazu0,00 € -
BS EN 61108-4:2004
Marine navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Shipborne DGPS DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing required test results
13.12.2004 - PDF - Englisch - BSI
mehr dazu293,00 € -
JIS B 7440-6:2004 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
20.03.2004 - PDF - Japanisch - JSA
mehr dazu36,27 € -
46,02 €
-
NF E11-200 (03/2004) (R2009)
Geometrische Produktspezifikationen (GPS) - Messgeräte in Betrieb - Anwendungsklassen
01.03.2004 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
DIN EN ISO 1 Beiblatt 1:2004-02
Geometrische Produktspezifikation (GPS) - Referenztemperatur für geometrische Produktspezifikation und -prüfung - Systematische Abweichungen und Beiträge zur Messunsicherheit bei Längenmessungen aufgrund thermischer Einflüsse (ISO/TR 16015:2003)
01.02.2004 - PDF - Deutsche - DIN
mehr dazu115,33 € -
XP E03-110 (12/2003)
Geometrische Produktspezifikationen (GPS) - Gewinde - Direkte Messungsverfahren
01.12.2003 - Paper - Französisch - AFNOR
mehr dazu144,67 € -
BS EN 61108-1:2003
Global navigation satellite systems (GNSS) positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
14.11.2003 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN 874-1:2003-11
Geometrische Produktspezifikation (GPS) - Lineale - Teil 1: Flachlineale aus Stahl, Maße, Technische Lieferbedingungen
01.11.2003 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN 874-1:2003-11
Geometrische Produktspezifikation (GPS) - Lineale - Teil 1: Flachlineale aus Stahl - Maße, Technische Lieferbedingungen
01.11.2003 - PDF - Englisch - DIN
mehr dazu57,57 € -
DIN 874-2:2003-11
Geometrische Produktspezifikation (GPS) - Lineale - Teil 2: Haarlineale, Maße, Technische Lieferbedingungen
01.11.2003 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 874-2:2003-11
Geometrische Produktspezifikation (GPS) - Lineale - Teil 2: Haarlineale - Maße, Technische Lieferbedingungen
01.11.2003 - PDF - Englisch - DIN
mehr dazu40,56 € -
NF E11-018 (10/2003)
Geometrische Produktspezifikationen (GPS) - Kalibrierungnormale - Dorne mit Rille
01.10.2003 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
JIS B 0031:2003 (R2013)
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
20.09.2003 - PDF - Japanisch - JSA
mehr dazu52,91 € -
DIN EN ISO 10360-1:2003-07
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 1: Begriffe (ISO 10360-1:2000 + Corr 1:2002) (enthält Berichtigung AC:2002), Deutsche Fassung EN ISO 10360-1:2000 + AC:2002
01.07.2003 - PDF - Deutsche - DIN
mehr dazu99,35 € -
DIN 254:2003-04
Geometrische Produktspezifikation (GPS) - Reihen von Kegeln und Kegelwinkeln, Werte für Einstellwinkel und Einstellhöhen
01.04.2003 - PDF - Deutsche - DIN
mehr dazu52,90 € -
DIN 254:2003-04
Geometrische Produktspezifikation (GPS) - Reihen von Kegeln und Kegelwinkeln, Werte für Einstellwinkel und Einstellhöhen
01.04.2003 - PDF - Englisch - DIN
mehr dazu66,07 € -
DIN 2299-1:2003-04
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrringe für Metrisches ISO-Gewinde allgemeiner Anwendung - Teil 1: Gewinde-Nenndurchmesser von 1 mm bis 200 mm
01.04.2003 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2299-1:2003-04
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrringe für Metrisches ISO-Gewinde allgemeiner Anwendung - Teil 1: Gewinde-Nenndurchmesser von 1 mm bis 200 mm
01.04.2003 - PDF - Englisch - DIN
mehr dazu40,56 € -
JIS B 7440-1:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary
20.03.2003 - PDF - Japanisch - JSA
mehr dazu41,86 € -
JIS B 7440-3:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMM's with the axis of a rotary table as the fourth axis
20.03.2003 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 7440-4:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
20.03.2003 - PDF - Japanisch - JSA
mehr dazu25,00 € -
NF E11-019 (12/2002)
Geometrische Produktspezifikation (GPS) - Spezifische Normale - Gestahlungsregeln und Mermale
01.12.2002 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF E11-107 (12/2002)
Geometrische Produktspezifikation (GPS) - Kugeln für Messtechnik
01.12.2002 - Paper - Französisch - AFNOR
mehr dazu75,67 € -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
20.11.2002 - PDF - Spanisch - AENOR
mehr dazu70,00 € -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
20.11.2002 - PDF - Englisch - AENOR
mehr dazu84,00 € -
JIS B 0672-1:2002 (R2013)
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions
20.09.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0672-2:2002 (R2013)
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
20.09.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0659-1:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures
20.03.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0670:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
20.03.2002 - PDF - Japanisch - JSA
mehr dazu36,27 € -
JIS B 0671-1:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
20.03.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0671-2:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
20.03.2002 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0671-3:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
20.03.2002 - PDF - Japanisch - JSA
mehr dazu41,86 € -
NF EN ISO 10360-6, E11-150-6 (02/2002)
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 6 : Abweichungsabschätzung beim Berechnen zugeordneter Geometrieelemente nach Gauss
01.02.2002 - Paper - Französisch - AFNOR
mehr dazu99,00 € -
JIS B 0651/ERRATUM 2:2002
Geometrical Product Specification (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (Erratum 2)
01.01.2002 - PDF - Japanisch - JSA
mehr dazu0,00 € -
UNE-EN ISO 3650:2001 ERRATUM (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS. (ISO 3650:1998)
17.12.2001 - PDF - Spanisch - AENOR
mehr dazu0,00 € -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
17.12.2001 - PDF - Spanisch - AENOR
mehr dazu76,00 € -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
17.12.2001 - PDF - Englisch - AENOR
mehr dazu91,20 € -
DIN 2284-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrenkörper - Teil 2: Ausschussarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN 2284-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrenkörper - Teil 2: Ausschussarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu57,57 € -
DIN 2283-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrdorne - Teil 2: Ausschussarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2283-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrdorne - Teil 2: Ausschussarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu40,56 € -
DIN 2283-1:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrdorne - Teil 1: Ausschussarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung von 1 mm bis 40 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2283-1:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Ausschusslehrdorne - Teil 1: Ausschussarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung von 1 mm bis 40 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu40,56 € -
DIN 2282-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrenkörper - Teil 2: Gutarbeitslehren, Prüf- und Einstellkörper für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN 2282-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrenkörper - Teil 2: Gutarbeitslehren, Prüf- und Einstellkörper für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu57,57 € -
DIN 2281-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrdorne - Teil 2: Gutarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2281-2:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrdorne - Teil 2: Gutarbeitslehren, Prüf- und Einstelldorne für Metrisches ISO-Gewinde allgemeiner Anwendung über 40 mm bis 200 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu40,56 € -
DIN 2281-1:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrdorne - Teil 1: Gutarbeitslehren, Prüf- und Einstellehren für Metrisches ISO-Gewinde allgemeiner Anwendung von 1 mm bis 40 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2281-1:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Gutlehrdorne - Teil 1: Gutarbeitslehren, Prüf- und Einstellehren für Metrisches ISO-Gewinde allgemeiner Anwendung von 1 mm bis 40 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu40,56 € -
DIN 2280:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Grenzlehrdorne für Metrisches ISO-Gewinde allgemeiner Anwendung von 1 mm bis 40 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2280:2001-12
Geometrische Produktspezifikation (GPS) - Gewinde-Grenzlehrdorne für Metrisches ISO-Gewinde allgemeiner Anwendung von 1 mm bis 40 mm Gewinde-Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu40,56 € -
DIN 2279:2001-12
Geometrische Produktspezifikation (GPS) - Lehren für Metrisches ISO-Gewinde - Lehrung des Innen- und Außengewindes, Übersicht, Beschriftung, Kennzeichnung, Anwendung
01.12.2001 - PDF - Deutsche - DIN
mehr dazu85,79 € -
DIN 2279:2001-12
Geometrische Produktspezifikation (GPS) - Lehren für Metrisches ISO-Gewinde - Lehrung des Innen- und Außengewindes, Übersicht, Beschriftung, Kennzeichnung, Anwendung
01.12.2001 - PDF - Englisch - DIN
mehr dazu107,48 € -
DIN 2240-2:2001-12
Geometrische Produktspezifikation (GPS) - Lehrengriffe - Teil 2: Für Lehrenkörper über 40 mm Nenndurchmesser, Griffe, Zylinderschrauben und Klemmstücke
01.12.2001 - PDF - Deutsche - DIN
mehr dazu45,98 € -
DIN 2240-2:2001-12
Geometrische Produktspezifikation (GPS) - Lehrengriffe - Teil 2: Für Lehrenkörper über 40 mm Nenndurchmesser, Griffe, Zylinderschrauben und Klemmstücke
01.12.2001 - PDF - Englisch - DIN
mehr dazu57,57 € -
DIN 2240-1:2001-12
Geometrische Produktspezifikation (GPS) - Lehrengriffe - Teil 1: Für Lehrenkörper mit Kegelzapfen 1:50 bis 40 mm Nenndurchmesser
01.12.2001 - PDF - Deutsche - DIN
mehr dazu32,34 € -
DIN 2240-1:2001-12
Geometrische Produktspezifikation (GPS) - Lehrengriffe - Teil 1: Für Lehrenkörper mit Kegelzapfen 1:50 bis 40 mm Nenndurchmesser
01.12.2001 - PDF - Englisch - DIN
mehr dazu40,56 € -
BS EN ISO 10360-3:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of rotary table as fourth
15.10.2001 - PDF - Englisch - BSI
mehr dazu250,00 € -
BS EN ISO 10360-1:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
15.10.2001 - PDF - Englisch - BSI
mehr dazu348,00 € -
BS EN ISO 5436-1:2001
Geometrical Product Specifications (GPS). Surface texture: Profile method, Measurement standards Geometric product specifications texture. method calibration.
23.08.2001 - PDF - Englisch - BSI
mehr dazu250,00 € -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
22.05.2001 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
22.05.2001 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
30.04.2001 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
30.04.2001 - PDF - Englisch - AENOR
mehr dazu81,60 € -
JIS B 0641-1:2001 (R2015)
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or nonconformance with specifications
20.03.2001 - PDF - Japanisch - JSA
mehr dazu25,00 € -
NF EN ISO 10360-1, E11-150-1 (03/2001)
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 1 : Begriffe
01.03.2001 - Paper - Englisch, Französisch - AFNOR
mehr dazu118,00 € -
JIS B 0633:2001 (R2015)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
20.01.2001 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0651:2001 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
20.01.2001 - PDF - Japanisch - JSA
mehr dazu36,27 € -
NF E02-353 (01/2001) (R2011)
Geometrische Produktspezifikation (GPS) - Getriebene Teile - Mass- und Planheitstoleranzen für Masse und Elemente ohne Einzeltoleranzen
01.01.2001 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
JIS B 0651/ERRATUM 1:2001
Geometrical Product Specification (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (Erratum 1)
01.01.2001 - PDF - Japanisch - JSA
mehr dazu0,00 € -
DIN EN ISO 5436-1:2000-11
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren, Normale - Teil 1: Maßverkörperungen (ISO 5436-1:2000), Deutsche Fassung EN ISO 5436-1:2000
01.11.2000 - PDF - Deutsche - DIN
mehr dazu85,79 € -
DIN EN ISO 5436-1:2000-11
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren, Normale - Teil 1: Maßverkörperungen (ISO 5436-1:2000)
01.11.2000 - PDF - Englisch - DIN
mehr dazu107,48 € -
DIN EN ISO 10360-3:2000-08
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmeßgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000), Deutsche Fassung EN ISO 10360-3:2000
01.08.2000 - PDF - Deutsche - DIN
mehr dazu59,63 € -
DIN EN ISO 10360-3:2000-08
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000), Deutsche Fassung EN ISO 10360-3:2000
01.08.2000 - PDF - Englisch - DIN
mehr dazu74,58 € -
NF EN ISO 5436-1, E05-053-1 (08/2000)
Geometrische Produktspezifikationen (GPS) - Oberflächenbreschaffenheit : normaler standard - Teil 1 : Massverkörperungen
01.08.2000 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF EN ISO 10360-3, E11-150-3 (08/2000)
Geometrische Produktspezifitation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3 : KMG mit der Achse eines Drehtisches als vierte Achse
01.08.2000 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
BS EN ISO 14660-1:2000
Geometrical product specifications (GPS). features General terms and definitions
15.07.2000 - PDF - Englisch - BSI
mehr dazu180,00 € -
JIS B 0027:2000 (R2014)
Technical drawings - Dimensioning and tolerancing of profiles
20.03.2000 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0029:2000 (R2014)
Technical drawings - Tolerancing of orientation and location - Projected tolerance zone
20.03.2000 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0631:2000 (R2014)
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters
20.03.2000 - PDF - Japanisch - JSA
mehr dazu36,27 € -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
28.02.2000 - PDF - Spanisch - AENOR
mehr dazu60,00 € -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
28.02.2000 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
21.01.2000 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
21.01.2000 - PDF - Englisch - AENOR
mehr dazu81,60 € -
NF EN ISO 8785, E05-019 (12/1999)
Geometrische Produktspezifikation (GPS) - Oberflächenunvollkommenheiten - Begriffe, Definitionen und Kenngrössen
01.12.1999 - Paper - Englisch, Französisch - AFNOR
mehr dazu90,00 € -
BS EN ISO 8785:1999
Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
15.10.1999 - PDF - Englisch - BSI
mehr dazu250,00 € -
DIN EN ISO 8785:1999-10
Geometrische Produktspezifikation (GPS) - Oberflächenunvollkommenheiten - Begriffe, Definitionen und Kenngrößen (ISO 8785:1998), Deutsche Fassung EN ISO 8785:1999
01.10.1999 - PDF - Deutsche - DIN
mehr dazu59,63 € -
BS EN ISO 3650:1999
Geometrical product specifications (GPS). Length standards. Gauge blocks
15.05.1999 - PDF - Englisch - BSI
mehr dazu250,00 € -
NF EN ISO 3650, E11-010 (03/1999)
Geometrische Produktspezifikation (GPS) - Längennormale - Parallelendmasse
01.03.1999 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
DIN EN ISO 3650:1999-02
Geometrische Produktspezifikationen (GPS) - Längennormale - Parallelendmaße (ISO 3650:1998), Deutsche Fassung EN ISO 3650:1998
01.02.1999 - PDF - Deutsche - DIN
mehr dazu72,80 € -
DIN EN ISO 3650:1999-02
Geometrische Produktspezifikationen (GPS) - Längennormale - Parallelendmaße (ISO 3650:1998), Deutsche Fassung EN ISO 3650:1998
01.02.1999 - PDF - Englisch - DIN
mehr dazu91,12 € -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
11.08.1998 - PDF - Spanisch - AENOR
mehr dazu57,00 € -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
11.08.1998 - PDF - Englisch - AENOR
mehr dazu68,40 € -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
18.06.1998 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
18.06.1998 - PDF - Englisch - AENOR
mehr dazu81,60 € -
UNE-EN ISO 12085:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
27.05.1998 - PDF - Spanisch - AENOR
mehr dazu68,00 € -
UNE-EN ISO 12085:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
27.05.1998 - PDF - Englisch - AENOR
mehr dazu81,60 € -
DIN EN ISO 12085:1998-05
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Motifkenngrößen (ISO 12085:1996), Deutsche Fassung EN ISO 12085:1997
01.05.1998 - PDF - Deutsche - DIN
mehr dazu79,72 € -
DIN EN ISO 12085:1998-05
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Motifkenngrößen (ISO 12085:1996), Deutsche Fassung EN ISO 12085:1997
01.05.1998 - PDF - Englisch - DIN
mehr dazu99,44 € -
DIN EN ISO 3274:1998-04
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Nenneigenschaften von Tastschnittgeräten (ISO 3274:1996), Deutsche Fassung EN ISO 3274:1997
01.04.1998 - PDF - Deutsche - DIN
mehr dazu72,80 € -
DIN EN ISO 3274:1998-04
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Nenneigenschaften von Tastschnittgeräten (ISO 3274:1996), Deutsche Fassung EN ISO 3274:1997
01.04.1998 - PDF - Englisch - DIN
mehr dazu91,12 € -
DIN EN ISO 13565-1:1998-04
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften - Teil 1: Filterung und allgemeine Meßbedingungen (ISO 13565-1:1996), Deutsche Fassung EN ISO 13565-1:1997
01.04.1998 - PDF - Deutsche - DIN
mehr dazu52,90 € -
DIN EN ISO 13565-1:1998-04
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften - Teil 1: Filterung und allgemeine Meßbedingungen (ISO 13565-1:1996), Deutsche Fassung EN ISO 13565-1:1997
01.04.1998 - PDF - Englisch - DIN
mehr dazu66,07 € -
25,00 €
-
25,00 €
-
NF EN ISO 3274, E05-052 (03/1998)
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit : Tastschnittverfahren - Nenneigenschaften von Tastschnittgeräten
01.03.1998 - Paper - Französisch - AFNOR
mehr dazu86,67 € -
NF EN ISO 13565-1, E05-021 (03/1998)
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit : Tastschnittverfahren - Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften - Teil 1 : Filterung und allgemeine Messbedingungen
01.03.1998 - Paper - Französisch - AFNOR
mehr dazu75,50 € -
NF EN ISO 12085, E05-020 (03/1998)
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit : tastschnittverfahren - Motifkenngrössen
01.03.1998 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
NF E11-097 (02/1998)
GEOMETRISCHE PRODUKTSPEZIFIKATIONEN (GPS). LAENGENMESSGERAETE. TIEFENMESS-SCHRAUBE. ANFORDERUNGEN. PRUEFVERFAHREN.
01.02.1998 - Paper - Französisch - AFNOR
mehr dazu99,33 € -
JIS B 0021:1998 (R2013)
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out
20.01.1998 - PDF - Japanisch - JSA
mehr dazu52,91 € -
JIS B 0025:1998 (R2013)
Technical drawings - Geometrical tolerancing - Positional tolerancing
20.01.1998 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0026:1998 (R2013)
Technical drawings - Dimensioning and tolerancing - Non-rigid parts
20.01.1998 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 7451:1997 (R2017)
Instruments for the assessment of departure from roundness - Measurement of variations in radius
20.11.1997 - PDF - Japanisch - JSA
mehr dazu36,27 € -
BS EN ISO 3274:1998
Geometrische Produktspezifikationen (GPS). Oberflaechenbeschaffenheit. Tastschnittverfahren. Nenneigenschaften von Tastschnittgeraeten
15.05.1997 - PDF - Englisch - BSI
mehr dazu180,00 € -
BS EN ISO 13565-1:1998
Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
15.05.1997 - PDF - Englisch - BSI
mehr dazu180,00 € -
NF E11-017 (12/1996) (R2002)
GEOMETRISCHE PRODUKSPEZIFIKATIONEN (GPS). LANGEMESSGERAETE. EICHSTIMASSE. ANFORDERUNGEN. PRUEFUNG.
01.12.1996 - Paper - Französisch - AFNOR
mehr dazu60,67 € -
JIS B 0023:1996 (R2015)
Technical drawings - Geometrical tolerancing - Maximum material requirement and least material requirement
01.01.1996 - PDF - Japanisch - JSA
mehr dazu25,00 € -
JIS B 0403:1995 (R2015)
Castings - System of dimensional tolerances and machining allowances
01.02.1995 - PDF - Japanisch - JSA
mehr dazu35,97 € -
25,00 €
-
25,00 €