Industrie
-
AIA NAS410:2025
NAS Certification & Qualification of Nondestructive Test Personnel
01.12.2025 - PDF sécurisé - Englisch - NAS
mehr dazu106,00 € -
MSS SP-160-2024
Valves for Hydrogen Fluoride Alkylation Service
01.09.2024 - PDF sécurisé - Englisch - MSS
mehr dazu435,00 € -
33,08 € -
26,54 € -
715,50 € -
626,00 € -
626,00 €
-
ANSI/ASNT CP-105-2024
ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel (2024)
01.01.2024 - Papier - Englisch - ASNT
mehr dazu167,00 € -
ANSI/ASNT CP-189-2024
ANSI/ASNT CP-189: ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel (2024)
01.01.2024 - Papier - Englisch - ASNT
mehr dazu148,00 € -
98,00 € -
147,00 €
-
450,00 € -
630,00 € -
SAE AS 6858:2023-04-21
Installation of Fuel Cell Systems in Large Civil Aircraft
21.04.2023 - PDF - Englisch - SAE
mehr dazu133,00 € -
189,57 € -
NF EN ISO 8062-3, A00-510-3 (03/2023)
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : General dimensional and geometrical tolerances and machining allowances for castings
01.03.2023 - PDF - Französisch - AFNOR
mehr dazu102,33 € -
298,00 € -
NF EN ISO 25178-700, E05-031-700 (01/2023)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 700 : Calibration, adjustment and verification of areal topography measuring instruments
01.01.2023 - PDF - Französisch - AFNOR
mehr dazu102,33 € -
DIN EN 17124:2022-12
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles, German version EN 17124:2022.
01.12.2022 - PDF - Deutsche - DIN
mehr dazu113,27 € -
NF E04-007 (12/2022)
Geometrical product specifications (GPS) - Discrete modal decomposition - Analysis method
01.12.2022 - PDF - Französisch - AFNOR
mehr dazu111,33 € -
NF EN 17666, X60-403 (11/2022)
Maintenance - Maintenance engineering - Requirements
01.11.2022 - PDF - Französisch - AFNOR
mehr dazu111,33 € -
DIN EN ISO 13338:2022-10
Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022), German version EN ISO 13338:2022
01.10.2022 - PDF - Deutsche - DIN
mehr dazu67,85 € -
NF EN ISO 10298/A1, E29-646/A1 (09/2022)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - Amendement 1
01.09.2022 - PDF - Französisch - AFNOR
mehr dazu26,50 € -
BS EN ISO 13338:2022 + Redline
Tracked Changes. Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
15.08.2022 - PDF - Englisch - BSI
mehr dazu235,00 € -
BS EN ISO 13338:2022
Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
10.08.2022 - PDF - Englisch - BSI
mehr dazu180,00 € -
DIN EN 10250-4:2022-08
Open die steel forgings for general engineering purposes - Part 4: Stainless steels, German version EN 10250-4:2021
01.08.2022 - PDF - Deutsche - DIN
mehr dazu82,15 € -
NF EN ISO 41018, X50-302 (08/2022)
Facility management - Élaboration d'une politique de facility management
01.08.2022 - PDF - Französisch - AFNOR
mehr dazu78,00 € -
DIN EN 10250-1:2022-07
Open die steel forgings for general engineering purposes - Part 1: General requirements, German version EN 10250-1:2022
01.07.2022 - PDF - Deutsche - DIN
mehr dazu74,95 € -
UNE-EN ISO 17268:2022
Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2020)
22.06.2022 - - - AENOR
mehr dazuVon: 104,00 € -
ISO 23828:2022
Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen
21.06.2022 - PDF - Englisch - ISO
mehr dazu204,00 € -
NBN EN ISO 13338:2022
Gasflaschen - Gase und Gasgemische - Bestimmung der Ätzwirkung zur Auswahl von Ventilausgängen (ISO 13338:2022)
18.06.2022 - PDF - Französisch - NBN
mehr dazu58,00 € -
NBN EN ISO 13338:2022
Gasflaschen - Gase und Gasgemische - Bestimmung der Ätzwirkung zur Auswahl von Ventilausgängen (ISO 13338:2022)
18.06.2022 - PDF - Englisch - NBN
mehr dazu58,00 € -
BS 669-1:2022 + Redline
Tracked Changes. Flexible hoses, end fittings and sockets for gas burning appliances Strip-wound metallic flexible covers, domestic 1st, 2nd 3rd family gases. Specification
07.06.2022 - PDF - Englisch - BSI
mehr dazu326,00 € -
NF EN ISO 13338, E29-647 (06/2022)
Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets
01.06.2022 - PDF - Französisch - AFNOR
mehr dazu49,33 € -
ASTM D7892-22 + Redline
Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
01.06.2022 - PDF DRM - Englisch - ASTM
mehr dazu75,00 € -
DIN EN 1949:2022-06
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles, German version EN 1949:2021.
01.06.2022 - PDF - Deutsche - DIN
mehr dazu135,89 € -
ASTM D7675-22
Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
01.06.2022 - - - ASTM
mehr dazuVon: 65,00 € -
33,08 €
-
BS EN 17124:2022 + Redline
Tracked Changes. Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
31.05.2022 - PDF - Englisch - BSI
mehr dazu438,00 € -
BS EN 17124:2022
Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
24.05.2022 - PDF - Englisch - BSI
mehr dazu312,00 € -
62,56 € -
NFPA 51:2023
Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes, 2023 Edition
09.04.2022 - Papier - Englisch - NFPA
mehr dazu209,00 € -
416,00 € -
NF X60-301 (04/2022)
Guide for taking into account criteria for maintenability of durables for industrial and professionnal use
01.04.2022 - PDF - Französisch - AFNOR
mehr dazu111,33 € -
100 fiches pratiques de maintenance préventive
Composants industriels courants, plans de préventif
30.03.2022 - Papier - Französisch - DUNOD
mehr dazu28,34 € -
Hydrogen Safety for Energy Applications
Engineering Design, Risk Assessment, and Codes and Standards
25.03.2022 - Papier - Englisch - ELSEVIERUK
mehr dazu203,00 € -
NBN EN 17124:2022
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
19.03.2022 - - - NBN
mehr dazu142,00 € -
Hydrogène-matériaux, corrosion sous contrainte, fatigue-corrosion
Recueil des Journées Jeunes Chercheurs 2021
03.03.2022 - Papier - Französisch - ECOLE DES MINES
mehr dazu39,81 € -
NF EN 17124, M58-006 (03/2022)
Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for road vehicles
01.03.2022 - PDF - Französisch - AFNOR
mehr dazu102,33 € -
NF ISO 10298/A1, E29-646/A1 (03/2022)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - AMENDEMENT 1
01.03.2022 - PDF - Französisch - AFNOR
mehr dazu26,50 € -
DIN ISO 21087:2022-03
Gas analysis - Analytical methods for hydrogen fuel - Proton exchange membrane (PEM) fuel cell applications for road vehicles (ISO 21087:2019)
01.03.2022 - PDF - Deutsche - DIN
mehr dazu82,15 € -
ISO 16573-2:2022
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high-strength steels
28.02.2022 - PDF - Englisch - ISO
mehr dazu75,00 € -
95,00 € -
DIN EN 12405-1:2022-02
Gas meters - Conversion devices - Part 1: Volume conversion, German version EN 12405-1:2021.
01.02.2022 - PDF - Deutsche - DIN
mehr dazu208,04 € -
DIN EN 15609:2022-02
LPG equipment and accessories - LPG propulsion systems for boats, yachts and other watercraft - Installation requirements, German version EN 15609:2021
01.02.2022 - PDF - Deutsche - DIN
mehr dazu130,09 € -
BS 669-1:2022
Flexible hoses, end fittings and sockets for gas burning appliances Strip-wound metallic flexible covers, domestic 1st, 2nd 3rd family gases. Specification
28.01.2022 - PDF - Englisch - BSI
mehr dazu250,00 € -
31,28 € -
DIN EN 12732:2022-01
Gas infrastructure - Welding steel pipework - Functional requirements, German version EN 12732:2021.
01.01.2022 - PDF - Deutsche - DIN
mehr dazu168,69 € -
DIN EN 13611:2022-01
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements, German version EN 13611:2019 + AC:2021
01.01.2022 - PDF - Deutsche - DIN
mehr dazu254,11 € -
760,00 €
-
77,00 € -
80,00 € -
ASM Handbooks Online™ 37 volumes - Corporate 2 Concurrent Users
Abonnement en ligne 1 an pour 2 utilisateurs simultanés
Accès par adresse IP ou Identifiant (adresse email)/mot de passe
ASM Handbooks
⦁ Volume 1Properties and Selection: Irons, Steels, and High-Performance Alloys
⦁ Volume 1ACast Iron Science and Technology
⦁ Volume 2Properties and Selection: Nonferrous Alloys and Special-Purpose Materials
⦁ Volume 2AAluminum Science and Technology
⦁ Volume 2BProperties and Selection of Aluminum Alloys
⦁ Volume 3Alloy Phase Diagrams
⦁ Volume 4ASteel Heat Treating Fundamentals and Processes
⦁ Volume 4BSteel Heat Treating Technologies
⦁ Volume 4CInduction Heating and Heat Treatment
⦁ Volume 4DHeat Treating of Irons and Steels
⦁ Volume 4EHeat Treating of Nonferrous Alloys
⦁ Volume 5Surface Engineering
⦁ Volume 5AThermal Spray Technology
⦁ Volume 5BProtective Organic Coatings
⦁ Volume 6Welding, Brazing, and Soldering
⦁ Volume 6AWelding Fundamentals and Processes
⦁ Volume 7Powder Metallurgy
⦁ Volume 8Mechanical Testing and Evaluation
⦁ Volume 9Metallography and Microstructures
⦁ Volume 10Materials Characterization
⦁ Volume 11Failure Analysis and Prevention
⦁ Volume 11AAnalysis and Prevention of Component and Equipment Failures New Volume
⦁ Volume 11BCharacterization and Failure Analysis of Plastics
⦁ Volume 12Fractography
⦁ Volume 13ACorrosion: Fundamentals, Testing, and Protection
⦁ Volume 13BCorrosion: Materials
⦁ Volume 13CCorrosion: Environments and Industries
⦁ Volume 14AMetalworking: Bulk Forming
⦁ Volume 14BMetalworking: Sheet Forming
⦁ Volume 15Casting
⦁ Volume 16Machining
⦁ Volume 17Nondestructive Evaluation of Materials
⦁ Volume 18Friction, Lubrication, and Wear Technology
⦁ Volume 19Fatigue and Fracture
⦁ Volume 20Materials Selection and Design
⦁ Volume 21Composites
⦁ Volume 22AFundamentals of Modeling for Metals Processing
⦁ Volume 22BMetals Process Simulation
⦁ Volume 23Materials for Medical Devices
⦁ Volume 24Additive Manufacturing Processes New Volume
⦁ ASM Handbook Archived Volumes
ASM Desk Editions
⦁ Engineered Materials Handbook Desk Edition
⦁ Metals Handbook Desk Edition, 2nd Edition
01.01.2022 - Internet - Englisch - ASM
mehr dazu1.298,00 € -
NF EN ISO 12179, E05-056 (01/2022)
Geometrical product specifications (GPS) - Surface texture : Profile method - Calibration of contact (stylus) instruments
01.01.2022 - PDF - Französisch - AFNOR
mehr dazu78,00 € -
NF EN ISO 25178-2, E05-031-2 (01/2022)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 2 : Terms, definitions and surface texture parameters
01.01.2022 - PDF - Französisch - AFNOR
mehr dazu149,00 € -
NF EN ISO 21920-1, E05-016-1 (01/2022)
Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture
01.01.2022 - PDF - Französisch - AFNOR
mehr dazu122,67 € -
NF EN ISO 21920-2, E05-016-2 (01/2022)
Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters
01.01.2022 - PDF - Französisch - AFNOR
mehr dazu159,33 € -
NF EN ISO 21920-3, E05-016-3 (01/2022)
Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators
01.01.2022 - PDF - Französisch - AFNOR
mehr dazu102,33 € -
152,00 € -
NBN ISO 6707-4:2021
Hoch- und Tiefbauarbeiten – Vokabular – Teil 4: Begriffe des Facility Managements
08.12.2021 - PDF - Englisch - NBN
mehr dazu37,00 € -
L'essor accéléré de la filière de l'hydrogène vert et bas carbone
Mobilité, industrie, services réseaux : potentiel des marchés à l’horizon 2050, analyse des risques, cartographie des acteurs européens et français
LES POINTS FORTS DE L'ÉTUDE :
Un scénario prospectif à l'horizon 2030-2050 de la filière hydrogène
Les perspectives de chaque grand marché : mobilité (auto, ferroviaire, aéro et naval), industrie, services réseaux, etc.
Le décryptage des plans de soutien publics
De nombreux exemples et études de cas pour analyser les stratégies des acteurs
La cartographie détaillée des acteurs de l'hydrogène en France et en Europe
Les fiches d'identité de 15 acteurs clés
01.12.2021 - PDF - Französisch - XERFI
mehr dazu3.192,00 € -
ASTM D7650-21
Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
01.12.2021 - - - ASTM
mehr dazuVon: 65,00 € -
UNE-EN ISO 41014:2021
Facility management - Development of facility management strategy (ISO 41014:2020)
03.11.2021 - - - AENOR
mehr dazuVon: 110,00 € -
DIN EN 10253-2:2021-11
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements, German version EN 10253-2:2021
01.11.2021 - PDF - Deutsche - DIN
mehr dazu222,71 € -
DIN 3588-2:2021-11
Gas Tapping Tees - Part 2: With and without shut-off function for pipes made of cast iron and steel - Requirements and tests.
01.11.2021 - PDF - Deutsche - DIN
mehr dazu74,95 € -
74,95 € -
DIN 3588-1:2021-11
Gas Tapping Tees - Part 1: Tapping valves for polyethylene gas pipe systems - Requirements and tests.
01.11.2021 - PDF - Deutsche - DIN
mehr dazu82,15 € -
NBN ISO 19880-8:2019/A1:2021
Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687
22.10.2021 - PDF - Englisch - NBN
mehr dazu20,00 € -
DIN EN 1254-2:2021-10
Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes, German version EN 1254-2:2021
01.10.2021 - PDF - Deutsche - DIN
mehr dazu95,42 € -
DIN EN 1254-1:2021-10
Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes, German version EN 1254-1:2021
01.10.2021 - PDF - Deutsche - DIN
mehr dazu95,42 € -
DIN EN 1254-7:2021-10
Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes, German version EN 1254-7:2021
01.10.2021 - PDF - Deutsche - DIN
mehr dazu102,34 € -
DIN EN 1254-4:2021-10
Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings, German version EN 1254-4:2021
01.10.2021 - PDF - Deutsche - DIN
mehr dazu82,15 € -
DIN EN 1254-5:2021-10
Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes, German version EN 1254-5:2021
01.10.2021 - PDF - Deutsche - DIN
mehr dazu95,42 € -
ASTM G114-21
Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
01.10.2021 - - - ASTM
mehr dazuVon: 72,00 € -
DIN EN ISO 41014:2021-10
Facility management - Development of a facility management strategy (ISO 41014:2020), German version EN ISO 41014:2020
01.10.2021 - PDF - Deutsche - DIN
mehr dazu135,89 € -
NF E10-100-1 (10/2021)
Geometrische Produktspezifikation (GPS) - Messverfahren - Teil 1 : Allgemeine Messbedingungen
01.10.2021 - PDF - Französisch - AFNOR
mehr dazu89,33 € -
46,45 € -
DIN EN 15339-2:2021-09
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units, German version EN 15339-2:2021
01.09.2021 - PDF - Deutsche - DIN
mehr dazu74,95 € -
DIN 13063:2021-09
Hospital cleaning - Requirements for cleaning and disinfection cleaning in hospitals and other health care facilities
01.09.2021 - PDF - Deutsche - DIN
mehr dazu190,09 € -
NF EN ISO 10360-13, E11-150-13 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13 : Optical 3D CMS
01.09.2021 - PDF - Französisch - AFNOR
mehr dazu134,67 € -
NF EN ISO 10360-10, E11-150-10 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 : laser trackers for measuring point-to-point distances
01.09.2021 - PDF - Französisch - AFNOR
mehr dazu122,67 € -
Green Hydrogen Market - GLOBAL:2021
Green Hydrogen Market - A Global and Regional Analysis: Focus on Application, Technology - Analysis and Forecast, 2021-2031
03.08.2021 - PDF - Englisch - BISRESEARCH
mehr dazu7.452,00 € -
Green Hydrogen Market - 1-3 USERS:2021
Green Hydrogen Market - A Global and Regional Analysis: Focus on Application, Technology - Analysis and Forecast, 2021-2031
03.08.2021 - PDF - Englisch - BISRESEARCH
mehr dazu4.830,00 € -
Maintenance des matériels de sécurité incendie - Version numérique
Document technique pour l'installation de systèmes de sécurité ou de sûreté sur un réseau informatique
Droits associés à cet ouvrage numérique : - consultation sur 2 ordinateurs ou terminaux mobiles - copier-coller : 10 pages autorisées par mois - impression : non autorisée
31.07.2021 - E-book - Französisch - CNPP
mehr dazu46,92 € -
52,13 €
-
DIN EN 437:2021-07
Test gases - Test pressures - Appliance categories, German version EN 437:2021.
01.07.2021 - PDF - Deutsche - DIN
mehr dazu140,93 € -
DIN 50450-9:2021-07
Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 9: Determination of oxygen, nitrogen, carbonmonoxide, carbondioxide, hydrogen and C<(Index)1>-C<(Index)3>-hydrocarbons in gaseous hydrogen chloride by gaschromatography
01.07.2021 - PDF - Deutsche - DIN
mehr dazu40,56 € -
DIN 3590-1:2021-07
Gas isolation valves and overpressure protection devices for pressure measuring devices - Part 1: Requirements and tests.
01.07.2021 - PDF - Deutsche - DIN
mehr dazu82,15 € -
DIN 3590-2:2021-07
Gas isolation valves and overpressure protection devices for pressure measuring devices - Part 2: Conformity assessment.
01.07.2021 - PDF - Deutsche - DIN
mehr dazu54,49 € -
ASM Handbook Volume 11A
Analysis and Prevention of Component and Equipment Failures
01.07.2021 - Papier - Englisch - ASM
mehr dazu630,00 € -
NBN ISO 8573-2:2021
Compressed air — Contaminant measurement — Part 2: Oil aerosol content
09.06.2021 - - - NBN
mehr dazu163,00 € -
121,00 € -
DIN CEN/TS 12007-6:2021-06
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U), German version CEN/TS 12007-6:2021.
01.06.2021 - PDF - Deutsche - DIN
mehr dazu82,06 € -
DIN EN 10216-5:2021-06
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes, German version EN 10216-5:2021
01.06.2021 - PDF - Deutsche - DIN
mehr dazu118,79 € -
DIN EN 10217-7:2021-06
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes, German version EN 10217-7:2021
01.06.2021 - PDF - Deutsche - DIN
mehr dazu113,27 € -
ASTM E582-21
Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
01.06.2021 - - - ASTM
mehr dazuVon: 65,00 € -
700,00 €
-
NF EN ISO 2692, E04-555 (06/2021)
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
01.06.2021 - PDF - Französisch - AFNOR
mehr dazu134,50 € -
Technologie des voitures électriques
Motorisations, batteries, hydrogène, interactions réseau
26.05.2021 - Papier - Französisch - DUNOD
mehr dazu72,99 € -
Von: 129,00 € -
BS ISO 6707-4:2021
Buildings and civil engineering works. Vocabulary Facility management terms
26.05.2021 - PDF - Englisch - BSI
mehr dazu312,00 € -
21/30423738 DC:2021
BS ISO 199. Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
25.05.2021 - PDF - Englisch - BSI
mehr dazu24,00 € -
NBN EN ISO 22081:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
24.03.2021 - - - NBN
mehr dazu89,00 € -
99,53 € -
CEN ISO/TR 41013:2021
Facility Management - Regelungsbereich, wichtige Konzepte und Nutzen (ISO/TR 41013:2017)
08.03.2021 - PDF - Englisch - NBN
mehr dazu58,00 € -
469,29 € -
BS EN ISO 22081:2021
Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
22.02.2021 - PDF - Englisch - BSI
mehr dazu266,00 € -
DIN 3389-2:2021-02
Ready-made insulated joint - Part 2: Insulating couplings for gas distribution and transportation - Requirements and tests.
01.02.2021 - PDF - Deutsche - DIN
mehr dazu82,15 € -
DIN 3389-3:2021-02
Ready-made insulated joint - Part 3: Conformity assessment.
01.02.2021 - PDF - Deutsche - DIN
mehr dazu61,40 € -
DIN 3389-1:2021-02
Ready-made insulated joint - Part 1: Insulating couplings for service lines and gas installations - Requirements and tests.
01.02.2021 - PDF - Deutsche - DIN
mehr dazu67,85 € -
NF EN ISO 22081, E04-574 (02/2021)
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Spécifications géométriques et dimensionnelles générales
01.02.2021 - PDF - Französisch - AFNOR
mehr dazu78,00 € -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
27.01.2021 - - - AENOR
mehr dazuVon: 103,00 € -
95,00 € -
DIN EN ISO 25178-72:2021-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017 + Amd 1:2020), German version EN ISO 25178-72:2017 + A1:2020
01.01.2021 - PDF - Deutsche - DIN
mehr dazu108,13 € -
ISO 21663:2020
Solid recovered fuels — Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
24.11.2020 - - - ISO
mehr dazu75,00 € -
NBN EN ISO 10298:2020
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
19.11.2020 - - - NBN
mehr dazu89,00 € -
ISO 15156-1:2020
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production
17.11.2020 - - - ISO
mehr dazu75,00 € -
ISO 15156-2:2020
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production
17.11.2020 - - - ISO
mehr dazu204,00 € -
ISO 15156-3:2020
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production
17.11.2020 - - - ISO
mehr dazu229,00 € -
DIN CEN/TR 15339-6:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter, German version CEN/TR 15339-6:2014
01.11.2020 - PDF - Deutsche - DIN
mehr dazu65,51 € -
DIN CEN/TR 15339-1:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements, German version CEN/TR 15339-1:2014
01.11.2020 - PDF - Deutsche - DIN
mehr dazu49,07 € -
DIN CEN/TR 15339-3:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units, German version CEN/TR 15339-3:2014
01.11.2020 - PDF - Deutsche - DIN
mehr dazu49,07 € -
DIN CEN/TR 15339-4:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply, German version CEN/TR 15339-4:2014
01.11.2020 - PDF - Deutsche - DIN
mehr dazu65,51 € -
DIN CEN/TR 15339-5:2020-11
Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units, German version CEN/TR 15339-5:2014
01.11.2020 - PDF - Deutsche - DIN
mehr dazu37,94 € -
DIN EN ISO 10360-5:2020-11
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020), German version EN ISO 10360-5:2020
01.11.2020 - PDF - Deutsche - DIN
mehr dazu135,89 € -
204,00 € -
370,00 € -
NBN ISO 19881:2020
Gasförmiger Wasserstoff – Kraftstoffbehälter für Landfahrzeuge
22.10.2020 - PDF - Englisch - NBN
mehr dazu184,00 € -
NBN EN ISO 41014:2020
Facility management - Development of facility management strategy (ISO 41014:2020)
22.10.2020 - - - NBN
mehr dazu163,00 € -
NF EN ISO 10298, E29-646 (10/2020)
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets
01.10.2020 - PDF - Französisch - AFNOR
mehr dazu78,00 € -
ISO 23753-2:2019/Amd 1:2020
Soil quality — Determination of dehydrogenases activity in soils — Part 2: Method using iodotetrazolium chloride (INT)
01.10.2020 - - - ISO
mehr dazu21,00 € -
ISO 23753-1:2019/Amd 1:2020
Soil quality — Determination of dehydrogenases activity in soils — Part 1: Method using triphenyltetrazolium chloride (TTC)
01.10.2020 - - - ISO
mehr dazu21,00 € -
BS EN ISO 25178-72:2017+A1:2020
Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
01.10.2020 - PDF - Englisch - BSI
mehr dazu312,00 € -
BS EN ISO 41014:2020
Facility management. Development of facility management strategy
30.09.2020 - PDF - Englisch - BSI
mehr dazu370,00 € -
31,28 € -
23,70 € -
NF EN ISO 41014, X50-093 (09/2020)
Facility management - Development of facility management strategy - Facility management - Élaboration de la stratégie de facility management
01.09.2020 - PDF - Französisch - AFNOR
mehr dazu122,67 € -
NF EN ISO 25178-72/A1, E05-031-72/A1 (09/2020)
Geometrical product specifications (GPS) - Surface texture : areal - Part 72 : XML file format x3p - Amendment 1 - Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 72 : Format de fichier XML x3p AMENDEMENT 1
01.09.2020 - PDF - Französisch - AFNOR
mehr dazu62,33 € -
DIN EN ISO 13385-2:2020-09
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020), German and English version EN ISO 13385-2:2020
01.09.2020 - PDF - Englisch, Deutsch - DIN
mehr dazu88,41 € -
NBN ISO 19880-5:2020
Gasförmiger Wasserstoff – Tankstellen – Teil 5: Zapfschläuche und Schlauchleitungen
27.08.2020 - PDF - Englisch - NBN
mehr dazu142,00 € -
PD ISO/TR 23276:2020
Geometrical product specifications (GPS). Surface texture: Profile method. Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
24.08.2020 - PDF - Englisch - BSI
mehr dazu191,00 € -
ISO 16573-1:2020
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
14.08.2020 - PDF - Englisch - ISO
mehr dazu75,00 € -
48,34 € -
0,00 € -
UNE-EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
01.08.2020 - PDF - Englisch - AENOR
mehr dazu68,00 € -
NBN ISO 22734:2020
Wasserstoffgeneratoren, die das Wasserelektrolyseverfahren nutzen – industrielle, gewerbliche und private Anwendungen
29.07.2020 - PDF - Englisch - NBN
mehr dazu163,00 € -
NBN ISO 21087:2020
Gas analysis — Analytical methods for hydrogen fuel — Proton exchange membrane (PEM) fuel cell applications for road vehicles
29.07.2020 - - - NBN
mehr dazu89,00 € -
43,60 €
-
DIN EN ISO 16610-29:2020-07
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020), German version EN ISO 16610-29:2020
01.07.2020 - PDF - Deutsche - DIN
mehr dazu95,42 € -
UNE-EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
01.07.2020 - PDF - Englisch - AENOR
mehr dazu94,00 € -
UNE-EN ISO 16610-29:2020
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
01.07.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
BS EN ISO 13385-2:2020 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
03.06.2020 - PDF - Englisch - BSI
mehr dazu235,00 € -
ASTM F2476-20 + Redline
Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2 TR) Through Barrier Materials Using an Infrared Detector
01.06.2020 - PDF DRM - Englisch - ASTM
mehr dazu75,00 € -
ASTM F1307-20
Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
01.06.2020 - - - ASTM
mehr dazuVon: 65,00 € -
630,00 € -
BS EN ISO 13385-2:2020
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
01.06.2020 - PDF - Englisch - BSI
mehr dazu180,00 € -
SAE J 2601:2020-05-29
Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles
29.05.2020 - PDF - Englisch - SAE
mehr dazu173,00 € -
72,99 € -
IEC 62282-2-100:2020
IEC 62282-2-100:2020 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
07.05.2020 - PDF - Englisch, Französisch - IEC
mehr dazu325,00 € -
ASTM D2713-20 + Redline
Standard Test Method for Dryness of Propane (Valve Freeze Method)
01.05.2020 - PDF DRM - Englisch - ASTM
mehr dazu54,00 € -
NF EN ISO 13385-2, E11-085-2 (05/2020)
Geometrische Produktspezifikation (GPS) - Längenmessgeräte - Teil 2: Tiefenmessschieber, Konstruktionsmerkmale und messtechnische Anforderungen
01.05.2020 - PDF - Französisch - AFNOR
mehr dazu78,00 € -
DIN EN ISO 16610-61:2020-05
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters: Gaussian filters (ISO 16610-61:2015 + Amd 1:2019), German version EN ISO 16610-61:2015 + A1:2020
01.05.2020 - PDF - Deutsche - DIN
mehr dazu108,13 € -
UNE-EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu72,00 € -
UNE-EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu65,00 € -
UNE-EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
01.05.2020 - PDF - Englisch - AENOR
mehr dazu69,00 € -
BS EN ISO 16610-29:2020
Geometrical product specifications (GPS). Filtration Linear profile filters: Wavelets
28.04.2020 - PDF - Englisch - BSI
mehr dazu266,00 € -
BS EN ISO 10360-5:2020
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
21.04.2020 - PDF - Englisch - BSI
mehr dazu370,00 € -
BS ISO 19880-1:2020
Gaseous hydrogen. Fuelling stations General requirements
20.04.2020 - PDF - Englisch - BSI
mehr dazu399,00 € -
FD X60-150 (04/2020)
Maintenance - Standard questionnaire for preliminary assessment of a maintenance service company
01.04.2020 - PDF - Französisch - AFNOR
mehr dazu62,33 € -
NF EN ISO 10360-5, E11-150-5 (04/2020)
Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 5 : Prüfung der Antastabweichungen von KMG mit berührendem Messkopfsystem im Einzelpunkt- und/oder Scanningbetrieb
01.04.2020 - PDF - Französisch - AFNOR
mehr dazu122,67 € -
NF EN ISO 16610-29, E05-040-29 (04/2020)
Geometrical product specifications (GPS) - Filtration - Part 29 : linear profile filters : wavelets - Spécification géométrique des produits (GPS) - Filtrage - Partie 29 : Filtres de profil linéaires : Ondelettes splines
01.04.2020 - PDF - Französisch - AFNOR
mehr dazu78,00 € -
90,00 € -
BS EN ISO 16610-61:2015+A1:2020
Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
11.03.2020 - PDF - Englisch - BSI
mehr dazu250,00 € -
254,00 €
-
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
04.03.2020 - - - AENOR
mehr dazuVon: 81,00 € -
DIN SPEC 91404:2020-03
Guideline for the standardization of maintenance processes
01.03.2020 - PDF - Deutsche - DIN
mehr dazu0,00 € -
DIN EN ISO 13385-1:2020-03
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019), German version EN ISO 13385-1:2019
01.03.2020 - PDF - Deutsche - DIN
mehr dazu88,41 € -
BS EN ISO 25178-71:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
27.02.2020 - PDF - Englisch - BSI
mehr dazu269,00 € -
BS ISO 464:2015 + Redline
Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
27.02.2020 - PDF - Englisch - BSI
mehr dazu373,00 € -
NBN EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
27.02.2020 - - - NBN
mehr dazu20,00 € -
BS ISO 16111:2018 + Redline
Tracked Changes. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
26.02.2020 - PDF - Englisch - BSI
mehr dazu520,00 € -
BS EN 13269:2016 + Redline
Tracked Changes. Maintenance. Guideline on preparation of maintenance contracts
26.02.2020 - PDF - Englisch - BSI
mehr dazu373,00 € -
BS EN ISO 17450-3:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts Toleranced features
26.02.2020 - PDF - Englisch - BSI
mehr dazu373,00 € -
BS EN ISO 3040:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
26.02.2020 - PDF - Englisch - BSI
mehr dazu438,00 € -
BS ISO 8573-2:2018 + Redline
Tracked Changes. Compressed air. Contaminant measurement Oil aerosol content
25.02.2020 - PDF - Englisch - BSI
mehr dazu454,00 € -
559,00 € -
BS EN 15628:2014 + Redline
Tracked Changes. Maintenance. Qualification of maintenance personnel
25.02.2020 - PDF - Englisch - BSI
mehr dazu438,00 € -
BS EN ISO 14405-2:2019 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
24.02.2020 - PDF - Englisch - BSI
mehr dazu373,00 €
