ASTM

Artikel 801 bis 1000 von insgesamt 1485

Aufsteigende Sortierung einstellen
pro Seite

Liste  Raster 

  • ASTM Research Report RR:D32-1040

    An interlaboratory study was conducted by three laboratories which tested three materials to establish the precision statement of test method D7084.
    27.10.2004 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D05-1029

    An interlaboratory study was conducted to establish a precision statement for test method D6357.
    22.10.2004 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D20-1243

    An interlaboratory test was conducted by seven laboratories testing six samples to develop estimates of data on a precision and bias statement for test method D7252.
    01.09.2004 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:G01-1021

    An interlaboratory study was conducted by six laboratories which tested four materials to establish the precision statement of test method G180.
    12.08.2004 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:C14-1004

    An interlaboratory round robin testing was conducted in accordance with Practice E 691 to establish the precision and bias of edge stress measurement (Procedure B) for C1279.
    01.08.2004 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1562

    An interlaboratory study was run by six laboratories that analyzed forty-six samples to establish a precision statement for test method D7095.
    30.07.2004 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1572

    An interlaboratory study to establish the precision statement for test method D2386 was run by fifteen laboratories testing thirteen samples of fuel consisting of Jet A, Jet A1, JP-5 and JP-8.
    20.07.2004 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D13-1118

    An interlaboratory study was conducted by four laboratories testing four sewing thread and two mattress tapes to establish a precision statement for test method D7016.
    16.07.2004 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D01-1133

    An interlaboratory study of test method D7189 was conducted in which one operator in each of four laboratories participated in round robin testing of five samples of news ink blacks of varying percentages of carbon black pigmentation.
    24.06.2004 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D16-1033

    An interlaboratory study performed by five laboratories which tested five materials to establish the precision statement of test method D7057.
    03.06.2004 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1581

    An interlaboratory study was conducted involving eight laboratories and using two pure chemicals, eleven fuels and four lubricating oils, to establish the precision statement for test method D7094.
    01.06.2004 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F11-1015

    An interlaboratory study was conducted by six laboratories which tested seven materials to establish the precision statement of test method F2105.
    10.05.2004 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:E28-1021

    An interlaboratory study was conducted by fourteen laboratories which tested six materials to establish the precision statement of test method E18.
    03.05.2004 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D16-1032

    This round robin was conducted in support of a revision of an existing test method, D3760, Analysis of Isopropyl Benzene (Cumene) by Capillary Gas Chromatography, to update the components identified and switch to calibration of the gas chromatography system by the external standard technique. The method was found to be applicable to the measurement of impurities such as nonaromatic hydrocarbons, benzene, toluene, ethylbenzene, phenol, cymenes, f-butylbenzene, n-butylbenzene, n-propyl benzene, alpha-methyl styrene, sec-butylbenzene, and diisopropylbenzenes. Five laboratories participated.
    05.04.2004 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E01-1039

    An interlaboratory study was conducted by nineteen laboratories which tested nine materials to establish the precision statement of test method E1335.
    30.03.2004 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E27-1006

    An interlaboratory study was conducted by thirteen laboratories which tested Constant Temperature Stability of 1-phenyl-1H-tetrazole-5-thiol, known to decompose autocatalytically to establish the precision statement of test method E487.
    17.03.2004 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:C16-1026

    An interlaboratory study was conducted by five laboratories testing six different extraction solutions prepared from six different material types of insulation to establish a precision statement for test method C871.
    12.03.2004 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D19-1176

    An interlaboratory study was conducted by 21 laboratories which tested 24 materials to establish the precision statement of test method D7066.
    10.03.2004 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:G01-1022

    An interlaboratory study was conducted by seven individuals which tested three soil samples to establish the precision statement of test method G187.
    29.01.2004 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F02-1020

    An interlaboratory study was conducted by three laboratories which tested non-lidded semirigid (PETE) thermoformed trays, and trays sealed with various porous barrier lidding materials to establish the precision statement of test method F2338.
    20.01.2004 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D30-1005

    An interlaboratory study was conducted by six laboratories testing six sets of twelve individual specimens to establish a precision statement for test method D6484.
    01.01.2004 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E37-1032

    An interlaboratory study was conducted in which eight laboratories characterized a poly(vinyl chloride) sample in to establish the precision statement of test method E2092.
    18.12.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1552

    An interlaboratory study was conducted by six laboratories testing nineteen samples to establish a precision statement for test method D7039. Only the repeatability precision estimate shown in this report is included in the publication of the test method.
    13.12.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1570

    An interlaboratory study was conducted by six laboratories testing seven sooted oils to establish the precision statement of test method D7710.
    12.12.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1568

    A round robin was conducted to support an upgrade to the viscometer head and software used in test method D5133.
    11.12.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1551

    An interlaboratory study was run by nineteen laboratories testing ten samples to establish a precision statement for test method D664.
    04.12.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1567

    An interlaboratory study was performed by eleven laboratories testing five oils to establish the precision statement for test method D7097.
    01.12.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E37-1030

    An interlaboratory study was conducted by fourteen laboratories testing two samples to establish a precision statement for test method E2160.
    25.11.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E37-1031

    An interlaboratory study was conducted by eight laboratories which tested the volatility rates for camphor at 333 K and squalane at 573 K were determined using the isothermal test to establish the precision statement of test method E2008.
    25.11.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:F11-1014

    An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method F608.
    04.11.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D14-1011

    An interlaboratory study was performed by five laboratories which tested one adhesive material according to ASTM D6004 and ASTM D686 to establish precision statements for D6004.
    28.10.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C14-1003

    An interlaboratory study to establish the precision for C1203. Six laboratories performed an analysis on four materials.
    27.10.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F02-1018

    An interlaboratory study was conducted by seven laboratories which tested eight materials to establish the precision statement of test method F2251.
    27.10.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C16-1027

    Research report C16-1027 describes an interlaboratory study that documents the estimate of repeatability in C1574.
    10.09.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1598

    An interlaboratory study was conducted involving nine laboratories and twelve middle distillate fuel samples to establish a precision statement for test method D5304.
    01.09.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D20-1238

    An interlaboratory study was conducted by eleven laboratories testing ten materials to establish a precision statement for test method D5132.
    28.08.2003 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D14-1014

    An intralaboratory study was conducted by one laboratory testing three samples to establish a repeatability statement for test method D1875.
    15.08.2003 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1548

    An interlaboratory study was performed by seven laboratories using two different types of Voltammograms to establish a precision statement for test method D6810.
    28.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1546

    An interlaboratory study was conducted by ten laboratories to establish a precision statement for test method D3120.
    25.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    98,70 €

  • ASTM Research Report RR:D02-1547

    An interlaboratory study was conducted by 56 laboratories testing sixteen samples of gasoline and diesel to establish precision statements for test methods D2622, D3120, and D5453.
    25.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D04-1021

    An interlaboratory study was conducted by laboratories testing five materials to establish a precision statement for test method D3549.
    25.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D04-1026

    An interlaboratory study was conducted by six laboratories to establish a precision statement for the test method, coefficient of luminous intensity, in standard specification D4280.
    25.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D14-1010

    An interlaboratory study was run in which test specimens of one material (latex-based elastomeric adhesive) was tested for Shear and Tensile strength in each of six laboratories with each laboratory testing one set of five specimens for each strength characteristic to establish precision statements for ASTM D6464.
    25.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E37-1029

    An interlaboratory study was conducted by thirteen laboratories which tested five materials to establish the precision statement of test method E2070.
    25.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D20-1236

    An interlaboratory study was conducted by thirteen laboratories testing three materials to establish a precision statement for test method D2578.
    09.07.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D16-1030

    An interlaboratory study performed by six laboratories which tested ten materials to establish the precision statement of test method D5060.
    25.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D16-1031

    An interlaboratory study was conducted by six laboratories testing two samples to establish a precision statement for test method D5135.
    25.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D20-1194

    An interlaboratory study was conducted by six laboratories including eight materials to establish a precision statement for Vicat Softening Temperature Using Loading 2 and Heating Rate A for test method D1525.
    25.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D20-1228

    An interlaboratory study was conducted by nine laboratories testing three materials to establish a precision statement for test method D746.
    25.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D20-1237

    An interlaboratory study was conducted by ten laboratories testing five rigid PVC dry blend compounds to establish a precision statement for the test method in standard practice D2538.
    25.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:E27-1005

    An interlaboratory study was conducted by ten laboratories which tested five materials to establish the precision statement of test method E2046.
    25.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D20-1239

    An interlaboratory study was conducted by seven laboratories testing four materials to establish a precision statement for test method D6979.
    10.06.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F02-1019

    An interlaboratory study was conducted by three laboratories testing samples to establish a precision statement for test method F2338.
    15.05.2003 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1542

    An interlaboratory study was conducted by eight operators testing nine identical samples to establish a precision statement for test method D6824.
    06.05.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1544

    An interlaboratory study was conducted to establish a precision statement for test method D6839.
    06.05.2003 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:F06-1008

    An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for test method F137 and F2055.
    06.05.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D13-1108

    An interlaboratory test was run in 1994 through 1995 in which three randomly-drawn samples were tested in five difference laboratories as directed in D2261. Two operators in each laboratory each tested eight specimens of each material. Four of the eight specimens were tested on one day and four specimens were tested on the second day.
    24.04.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D13-1109

    An interlaboratory study was conducted by eight laboratories testing three woven fabrics and six laboratories testing eight nonwoven fabrics to establish a precision statement for test method D737.
    24.04.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D13-1110

    An interlaboratory test was run in 1994 through 1995 in which randomly drawn samples were tested as directed in the five options of D1777. Six laboratories participated, each testing five materials. Two operators in each laboratory each tested ten specimens of each material. Five of the ten specimens were tested on one day and five were tested on a second day.
    24.04.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D13-1111

    An interalaboratory study was conducted by six laboratories testing five samples to establish a precision statement for test method D1388.
    24.04.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D27-1015

    An interlaboratory study was conducted by twelve laboratories which tested four materials to establish the precision statement of test method D924.
    16.04.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1127

    An interlaboratory study of the iodine value of two tall oil fatty acids using two different solvents, was run in 2000 for test method D5768.
    31.03.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1537

    An interlaboratory study was conducted by nine laboratories performing hydroperoxide analyses on a total of seven different samples to establish a precision statement for test method D6447.
    31.03.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1539

    An interlaboratory study was run at six labs using six oils to establish a precision and bias statement for test method B for D2893.
    31.03.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1540

    An interlaboratory study was run by six laboratories testing twelve samples to establish a precision statement for test method D6426.
    31.03.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D19-1172

    An interlaboratory study was conducted by seven laboratories testing standard turbidity and real world turbidity samples to establish a precision statement for test method D6855.
    31.03.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D22-1030

    An interlaboratory study was conducted by thirteen laboratories testing thirteen sets of glass-fiber filters spiked with four levels of TDIP to establish a precision statement for test method D5836.
    18.02.2003 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C07-1004

    An interlaboratory study, consistent with the guidelines of Practice E 691, was conducted in June 2000, to establish precision statements for C110. The test for specific gravity was conducted in accordance with these test methods, Section 21.
    12.02.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D19-1171

    An interlaboratory study was conducted by seven laboratories which tested three materials to establish the precision statement of test method D6239.
    12.02.2003 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:E37-1028

    An interlaboratory study was conducted by twelve laboratories which tested five materials to establish the precision statement of test method E2041.
    12.02.2003 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:E01-1037

    An interlaboratory study was conducted by eight laboratories which tested six materials to establish the precision statement of test method E2242.
    15.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D27-1016

    An interlaboratory study was conducted by laboratories testing five standard gas-in-oil samples to establish a precision statement for test method D3612.
    14.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D34-1014

    To establish precision statements for ASTM D6418, RR D34-1014 describes 4 studies that were performed to evaluate the performance of the En Core sampler for storage of soil samples spiked with VOCs.
    10.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:F07-1007

    An interlaboratory study was conducted by three laboratories which tested sixteen materials to establish the precision statement of test method F548.
    10.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F07-1008

    An interlaboratory study was conducted by seven laboratories which tested twelve materials to establish the precision statement of test method F428.
    10.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1530

    An interlaboratory study was conducted by eight laboratories which tested nine samples by using filters with pore sizes of 0.8um and 0.65um to establish a precision statement for test method D6824.
    08.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E15-1060

    An interlaboratory study was conducted by six laboratories which tested two materials to establish the precision statement of test method E1787.
    08.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F02-1017

    An interlaboratory study was conducted by seven laboratories which tested thirteen materials to establish the precision statement of test method F2203.
    08.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D04-1020

    An interlaboratory study was conducted by twenty-one laboratories testing twenty-seven samples to establish a precision statement for test method D6752.
    01.01.2003 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D02-1559

    An interlaboratory study was run by ten laboratories testing nine samples to establish a precision statement for test method D7040.
    11.12.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F02-1029

    Research Report F02-1029 presents the results of the Interlaboratory Study used to establish the establish the precision and bias statement for ASTM D3078-02, Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission. The collaborative study included 3 labs who used method D3078 to detect controlled leaks at three vacuum levels. The research report presents summary method performance statistics as well as the measurement data used to calculate results for the study.
    10.12.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1558

    An interlaboratory study was run by nine laboratories testing eight gasoline samples and eight diesel samples to establish a precision statement for test method D7041.
    20.11.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D13-1113

    An interlaboratory study was conducted by two laboratories testing three fabric samples to establish a precision statement for test method D7024.
    18.11.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F06-1007

    An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method F2199.
    27.09.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1594

    An interlaboratory study was conducted to establish a precision statement for test method D6895. This report summarizes two round robins utilizing the same procedure and different materials.
    23.09.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D19-1173

    An interlaboratory study performed by ten laboratories which tested six samples to establish the precision statement of test method D6888.
    10.09.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C26-1011

    An interlaboratory study was conducted by a single laboratory testing three samples to establish a precision statement for test method C1539.
    22.08.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1528

    An interlaboratory study was conducted by six laboratories testing three different anti-wear hydraulic oils to establish a precision statement for test method D4310.
    22.08.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F23-1005

    An interlaboratory study was conducted by six laboratories which tested three fabric samples to establish the precision statement of test method F1868.
    22.08.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E27-1003

    An interlaboratory study was conducted by six laboratories which tested trityl azide in quintuplicate to establish the precision statement of test method E537.
    11.07.2002 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D05-1030

    An interlaboratory study was conducted by six laboratories to establish a precision statement for test method D6721.
    09.07.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1126

    An interlaboratory study of the test method D6762 was conducted by six laboratories to determine precision.
    08.07.2002 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1524

    An interlaboratory study was conducted to establish precision statements for the four standard ASTM Cloud point methods: D2500, D5771, D5772 and D5773. Participants analyzed eleven sample sets comprised of two petroleum distillate fuels, diesel and kerosene, with various biodiesel fuels with a temperature range from +10 to ?45�,C.
    03.07.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1525

    An interlaboratory study was conducted by ten laboratories testing fourteen fuel samples to establish a precision statement for test method D1840.
    03.07.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1518

    An interlaboratory study was conducted by six laboratories testing twelve samples to establish a precision statement for test method D6730.
    02.07.2002 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1527

    An interlaboratory study was conducted by eleven laboratories testing fifteen samples to establish a precision statement for test method D4629.
    19.06.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D26-1018

    An interlaboratory study was conducted by three laboratories testing standards made up in perchloroethylene with components ranging from 2 ppm to 93 wt.% so a precision statement could be established for practice D6806.
    10.06.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D05-1028

    An interlaboratory study was conducted by eight laboratories testing nine coal samples, one coke samples, and one lignite samples to establish a precision statement for test method D5865.
    28.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E01-1035

    An interlaboratory study was conducted by nine laboratories which tested nine materials to establish the precision statement of test method E2209.
    28.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:A06-1002

    An interlaboratory study was conducted with three blended Epstein specimens of ASTM Type 64D430 material that were circulated to 23 participating laboratories to determine precision and bias when testing CRML steel.
    20.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D32-1039

    An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method D6761.
    20.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E15-1059

    An interlaboratory study was conducted by seven laboratories which tested two materials to establish the precision statement of test method E1863.
    20.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F06-1006

    An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method F410.
    20.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1522

    An interlaboratory study was conducted where laboratories used seven instruments to test thirteen middle distillate fuel samples to establish a precision statement for test method D6748.
    13.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D16-1029

    An interlaboratory study was conducted by fifteen laboratories testing samples of Toluene, Xylene, and Cresol to establish a precision statement for test method D850.
    13.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E37-1037

    An interlaboratory study was conducted by ten laboratories testing a single 0.025 mm thick film sample of polystyrene to establish a precision statement for test method E1824.
    10.05.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F17-1048

    An interlaboratory study was conducted by six laboratories testing pellets of polyethylene resin to establish a precision statement for test method F2231.
    22.04.2002 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1521

    An interlaboratory study was conducted where participants analyzed four sets of undyed base fuels and twelve sets of dyed base fuel/color to establish the precision statement for test method D6756.
    18.04.2002 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E15-1047

    An interlaboratory study was conducted by ten laboratories testing three samples containing approximately 80, 90, and 95% mass sulfuric acid to establish a precision statement for test methods E223.
    05.04.2002 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E37-1027

    An interlaboratory study was conducted by seven laboratories. Each laboratory characterized in hextuplicate a commercially available polyethylene Oxidation Induction Time (OIT) reference material to establish the precision statement of test method E2009.
    03.03.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D05-1026

    An interlaboratory study that was conducted to establish a precision statement for two proposed alternative methods for mercury in coal, D6414 and D6722, and to re-evaluate the precision of test method D3684.
    20.02.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D16-1028

    An interlaboratory study was conducted to provide a full thermistor precision statement for ASTM D852. One laboratory determined the solidification point of a benzene sample twelve times. Seven different laboratories determined the solidification point of three different benzene samples in triplicate on two different days.
    20.02.2002 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F07-1006

    An interlaboratory study was conducted by nineteen laboratories measuring computer generated curves and actual photos through aircraft windscreens to establish a precision statement for test method F2156.
    20.02.2002 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:F11-1013

    An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method F608.
    29.01.2002 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F23-1006

    An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method F2298.
    01.01.2002 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1517

    An interlaboratory study was conducted by laboratories to determine the precision of Mini-Rotary Viscometer yield stress and viscosity of highly sooted diesel engine oils for test method D4684.
    07.12.2001 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D14-1009

    An interlaboratory study was run in which test specimens of one material (solvent-based elastomeric adhesive) was tested for Dry Shear strength in each of six laboratories to establish the precision statement of test method D3498.
    21.11.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E01-1033

    An interlaboratory study was conducted by six laboratories which tested two materials to establish the precision statement of test method E248.
    21.11.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1508

    An interlaboratory study was conducted by ten laboratories testing eleven different samples to evaluate the precision of test method D5771.
    11.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1509

    An interlaboratory study was conducted by five laboratories testing eleven samples to evaluate the precision of test method D5772.
    11.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1510

    An interlaboratory study was conducted by ten laboratories testing eleven samples to evaluate the precision of test method D5273.
    11.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1511

    An interlaboratory study was conducted by thirteen laboratories testing eight oils to establish a precision statement for test method D5133. The samples measured in the study covered the viscosity range from 5000 to 40,000 mPa(s).
    11.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1512

    An interlaboratory study was conducted by thirteen laboratories testing six samples to establish a precision statement for test method D6732.
    11.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1514

    An interlaboratory study was conducted by seven laboratories testing twelve fuel samples to establish a precision statement for test method D6728.
    11.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D26-1016

    An interlaboratory study was conducted by seven laboratories to establish a precision statement for Method A and Method B in standard D2989.
    02.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D26-1017

    An interlaboratory study was conducted by laboratories testing a standard of 9.8 ppm olive oil in trichloroethylene to establish a precision statement for test methods D and E of D2109.
    02.10.2001 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D04-1019

    An Inter-Laboratory Study was conducted to establish precision statements for ASTM D6703, Standard Test Method for Automated Heithaus Titrimetry.
    05.09.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D05-1025

    An Interlaboratory Study was conducted to establish precision statements for ASTM D5865, Standard Test Method for Gross Calorific Value of Coal and Coke. A ruggedness test trial (T1) completed in the year 2000 confirmed that disks made of quartz fiber are suitable for this purpose. A modification to the design of the quartz fisks tested in trial (T2), which eliminates contact of the coke sample with the sides of the combustion crucible reduced the variability of the results.
    09.08.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1595

    An interlaboratory study was conducted by six laboratories testing oils at -26�,C and five laboratories testing oils at -40�,C to establish a precision statement for test method D6821.
    06.08.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D05-1024

    An interlaboratory study was conducted by laboratories testing samples of varying coal ranks to establish a precision statement for test method D2961.
    27.07.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D19-1170

    An interlaboratory study was conducted by twelve laboratories testing ten samples in each of 3 matrices: reagent water spiked with KHP, reagent water spiked with KHP and chloride and ASTM substitute waster water, to establish a precision statement for test method D6697.
    27.07.2001 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:E27-1002

    An interlaboratory study was conducted by eight laboratories which tested one material at five heating ratings to establish the precision statement of test method E698.
    27.07.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F16-1000

    An interlaboratory study was conducted by four laboratories which tested square bar specimens at five different conditions, four under different applied potentials and one in air to establish the precision statement of test method F1940.
    27.07.2001 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1507

    An interlaboratory study was conducted by fourteen laboratories testing fifteen samples to establish a precision statement for test method D5762.
    26.06.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C16-1025

    An interlaboratory study done in six laboratories to establish the precision of the density test method C303.
    29.05.2001 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D34-1013

    This research report describes the study that was conducted to generate data on the performance of the En Core sampler to store soils spiked with low level concentrations of VOCs, as well as the study conducted to generate data on the performance of the 25-gram En Core sampler to store samplers spiked with EPA Method 1311 volatile organic analytes. These data are presented in appendices X1 and X2 of ASTM Practice D6418.
    29.05.2001 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:F02-1016

    An interlaboratory study was conducted by five laboratories, each testing three samples to establish a precision statement for test method D2095.
    29.05.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D35-1009

    An interlaboratory study was conducted by five laboratories testing a geonet and a geocomposite material to establish a precision statement for test method D5199.
    20.05.2001 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1506

    An interlaboratory study was conducted by laboratories testing samples in n-butane, isobutane, and a propane/propylene mix to establish a precision statement for test method D6667.
    09.05.2001 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:B09-1011

    An interlaboratory study was performed by nine laboratories testing two tungsten carbide powders in the laboratory-milled condition to establish a precision statement for test method B761. This report has been published in the absence of any other precision estimates for B761, despite not testing enough materials to provide statistically valid results as per ASTM Standard Practice E691.
    23.04.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1503

    An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for test method D6591.
    23.04.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F03-1015

    An interlaboratory study was conducted by eleven laboratories which tested two materials to establish the precision statement of test method F146.
    23.04.2001 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D21-1000

    An interlaboratory study was conducted by six laboratories testing two polish samples to establish a precision statement for test method D2047.
    18.04.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1485

    An interlaboratory study was conducted for test method D6616 to establish a precision statement for the measurement of HTHSV at 100 degrees C.
    04.04.2001 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D19-1169

    An interlaboratory study performed by nine laboratories to establish the precision statement of test method D6592.
    04.04.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D20-1218

    An interlaboratory study was conducted by fifteen laboratories testing eight materials to establish a precision statement for test method D2863.
    20.03.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1499

    An interlaboratory study was conducted to establish precision for test method D6749 using 1 degree C test increments in measuring pour point.
    22.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1500

    An interlaboratory test was conducted by eleven laboratories testing eleven samples to establish a precision statement for test method D3831.
    22.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E37-1026

    An interlaboratory study was conducted by fourteen laboratories testing five samples to establish a precision statement for test method E1952.
    22.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D01-1122

    An interlaboratory study was conducted to determine the precision of the test method D6229 under repeatability and reproducibility conditions.
    09.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1123

    An interlaboratory study was conducted to determine the precision of automatic D1078 under reproducibility conditions. Also included was the determination of D1078 results using manuel distillation to determine the relative bias between automatic and manual D1078 results and whether these results from both are statistically equivalent.
    09.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D02-1498

    An interlaboratory study was conducted by thirty laboratories testing ten samples to establish a precision statement for test method D445.
    09.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D20-1216

    An interlaboratory test was conducted by six laboratories testing four materials to establish a precision statement for test method D4094.
    09.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D15-1020

    An interlaboratory study performed by eight laboratories which tested five coolant materials to establish the precision statement of test method D6660.
    08.02.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1496

    An interlaboratory study was conducted to evaluation precision of the test method D4741 at 100 degrees C on non-Newtonian test oils.
    02.01.2001 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1497

    An interlaboratory study was conducted to evaluation precision of the test method D4741 at 150 degree C on non-Newtonian test oils.
    02.01.2001 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1494

    An interlaboratory study was conducted to generate precision data for the test method D6558.
    20.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1495

    An interlaboratory study was conducted to generate precision data for the test method D6559.
    20.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1487

    An interlaboratory study was conducted by fourteen laboratories analyzing eleven oil samples to determine a precision statement for test method D6595.
    16.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:C08-1018

    An interlaboratory study was conducted by four laboratories testing four refractory materials to establish precision statements for test method C24.
    14.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1493

    An interlaboratory study was conducted for test method D1218 to establish a precision statement for automatic refractometers for measuring the refractive index of liquids at 20 degree C.
    14.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D20-1215

    An interlaboratory study was conducted by nine laboratories to establish a precision statement for Procedure B in test method D5630. The ASTM and ISO test procedures for the determination of ash in polyamides and thermoplastic polyesters are similar but do require different temperatures for the ash analysis. This round robin conducted per ASTM E 691 was designed to determine the equivalency of results at the two ash temperatures, 900 �,C in ASTM D 5630 and 850 �,C in ISO 3451. In addition the ASTM and ISO standards require ashing the sample to a constant weight which adds additional time to the analysis. Therefore, a secondary objective of this round robin was to evaluate the time required to reach a constant weight.
    14.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F17-1046

    An interlaboratory study was conducted by nine laboratories testing four HDPE materials to establish a precision statement for test method F2136.
    01.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F17-1047

    An interlaboratory study was conducted by five laboratories testing DWV sanitary tees to establish a precision statement for specification F2135.
    01.12.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D20-1213

    Research report D20-1213 details an interlaboratory study that was conducted for the test methods in the standard specifications D5857 and D4101 to establish precision statements for D4101. This study was conducted to evaluate the effect of sample preparation on the precision of the data determined by the various testing procedures specified for the Polypropylene callouts in D4101. The study conducted for D5857 was performed to provide possible data for correlation studies and to determine if there were any significant differences in data reproducibility between the two systems.
    28.11.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D01-1119

    An interlaboratory study was conducted by four laboratories testing four paint samples to establish a precision statement for test method D5895.
    07.11.2000 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1486

    An interlaboratory study was performed by eleven laboratories on twelve samples to establish a precision statement for test method D2983.
    16.10.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1489

    An interlaboratory study was conducted by eighteen laboratories testing five oils to establish a precision statement for test method D6200. The oils represented the ranges for the six primary cooling curve characteristics.
    06.10.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D20-1211

    This report describes an interlaboratory study that studies the repeatability of test method D1894 for temperatures other than 23�,C.
    28.09.2000 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F02-1014

    An interlaboratory study was conducted by ten laboratories which tested four packaged sets for each of two material types to establish the precision statement of test method F2054.
    28.09.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D11-1092

    An interlaboratory study was conducted by seven laboratories testing three rubbers, VMQ, FKM, and HNBR, to establish a precision statement for test method D6515.
    19.09.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D01-1118

    An interlaboratory study was conducted in which one operator in ten laboratories tested 2-ethylhexanol with a purity value of 99.653 and which contained 0.203 weight % of ethyl methyl pentanol to establish a precision statement for test method D5008.
    01.09.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D11-1091

    An interlaboratory study was conducted by six laboratories testing twenty-one materials of varying hardness to establish a precision statement for Type M durometers in test method D2240.
    01.09.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E01-1031

    An interlaboratory study was conducted by nine laboratories testing seven samples to establish a precision statement for test method E2209.
    01.09.2000 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D20-1208

    An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D4671.
    18.08.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D20-1209

    An interlaboratory study was conducted by twelve laboratories testing three polyol samples with water contents of approximately 0.03, 0.42, and 1.6% to establish a precision statement for the automated procedure in test method D4672.
    18.08.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D20-1210

    An interlaboratory study was conducted by eight laboratories testing six samples to establish a precision statement for test method D6437.
    18.08.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C16-1024

    An interlaboratory study was run in which randomly drawn test specimens of two materials were tested for moisture sorption to establish precision statements for C1104.
    12.07.2000 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C14-1002

    An interlaboratory round robin testing was conducted in accordance with Practice E 691 to establish the precision and bias of surface stress measurements (Procedure A) for C1279.
    22.06.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1483

    An interlaboratory study was conducted to establish a precision statement for test method D6557.
    22.06.2000 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1478

    An interlaboratory study was conducted by six laboratories testing thirteen samples to establish a precision statement for test method D6550.
    08.06.2000 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:B09-1010

    Research report B09-1010 describes the results of an interlaboratory study to determine the precision for B330 done in five laboratories using tungsten carbide powders in both the as-supplied and laboratory-milled conditions. This report has been published in the absence of any other precision estimates for B330, despite not having enough laboratories to provide statistically valid results as per ASTM Standard Practice E691.
    12.05.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D13-1105

    An interlaboratory study was conducted by a single laboratory testing two fabric samples to establish a preliminary precision statement for test method D6545.
    12.05.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E05-1011

    An interlaboratory study was conducted by six laboratories testing four twin size mattresses to establish a precision statement for test method E1590.
    04.04.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:F02-1013

    An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method F1886.
    04.04.2000 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D19-1168

    This interlaboratory study was performed by seven operators in four laboratories analyzed each of four samples (three cooling tower samples and one spiked control sample) in triplicate to establish the precision statement of test method D6530.
    03.04.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D35-1008

    An interlaboratory study was conducted by nine laboratories which tested four materials to establish the precision statement of test method D4716.
    03.04.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E12-1000

    An interlaboratory study was conducted by five laboratories which tested six materials to establish the precision statement of test method E2073.
    22.03.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D13-1104

    An interlaboratory study was conducted by seven laboratories testing five uncoated fabrics covering a range of permeabilities to establish a precision statement for test method for D6476.
    09.03.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:C26-1009

    An interlaboratory study was conducted to establish a precision statement for C1457.
    29.02.2000 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C26-1010

    An interlaboratory study was conducted to establish a precision statement for C1430.
    29.02.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D22-1029

    An interlaboratory study was conducted by six laboratories testing sets of eighteen spiked samples to establish a precision statement for test method D6494.
    29.02.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E01-1029

    An interlaboratory study was conducted by seven laboratories which tested seven materials to establish the precision statement of test method E2050.
    18.02.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D19-1164

    An interlaboratory study was conducted by twelve laboratories testing eight samples to establish a precision statement for test method D6581.
    14.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D19-1165

    An interlaboratory study was conducted by eleven laboratories testing samples to establish a precision statement for test method D6508.
    14.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D19-1167

    An interlaboratory study performed by nine laboratories which tested eighteen materials to establish the precision statement of test method D6503.
    14.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E01-1028

    An interlaboratory study was conducted by a single laboratory testing two samples to establish a precision statement for test method E1659.
    14.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1476

    An interlaboratory study was conducted for test method D2624 to establish a precision statement for the MLA900 instrument.
    10.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D04-1018

    An interlaboratory study was conducted by six laboratories to establish a precision statement for test method D4792.
    10.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:A06-1001

    Commercially produced dc hysteresigraphs are the predominate method of measurement of the dc magnetic properties of soft magnetic materials. The use of such equipment is covered by ASTM Test Method A773/A773M. The Precision and Bias statement in Method A773/A773M was not established by an interlaboratory study. Consequently, an interlaboratory was initiated under the asupices of committee A06.
    03.01.2000 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

Artikel 801 bis 1000 von insgesamt 1485

Aufsteigende Sortierung einstellen
pro Seite

Liste  Raster