ASTM

Artikel 601 bis 800 von insgesamt 1485

Aufsteigende Sortierung einstellen
pro Seite

Liste  Raster 

  • ASTM Research Report RR:E28-1034

    An interlaboratory study was conducted by six laboratories testing one sample (Pyromet 80A) to establish a precision statement for test method E292.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E28-1035

    An interlaboratory study was conducted by eight laboratories testing ninety reference samples of low energy level and ninety reference samples of high energy level to establish a precision statement for test method E2298.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E28-1036

    An interlaboratory study was conducted by nine laboratories testing eighteen Charpy V-notch samples of ERM high energy to establish a precision statement for test method E2298.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E28-1037

    An interlaboratory study was conducted by thirteen laboratories testing sixty-five miniaturized Charpy V-notch samples of JRQ steel to establish a precision statement for test methods E2298 and E2248.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:E28-1038

    An interlaboratory study was conducted by six laboratories testing three samples (an A533B cl.1 reactor pressure vessel steel (tested at two different temperatures) and two 4340 steels with different characteristics (low energy and high energy)) to establish a precision statement for test method E2298.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E28-1039

    Research Report E28-1039 presents the results of the Interlaboratory Study used to establish the precision and bias statement for ASTM E 2248, Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens. The collaborative study included 5 labs that used method E 2248 to analyze 3 samples.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E28-1040

    An interlaboratory study was conducted by eight laboratories testing three samples (an A533B cl.1 reactor pressure vessel steel (tested at two different temperatures) and two 4340 steels with different characteristics (low energy and high energy)) to establish a precision statement for test method E2298.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:E35-1002

    An interlaboratory study was conducted by nine laboratories testing six batches of granular formulations to establish a precision statement for test method E2686.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E56-1001

    An interlaboratory study was conducted by twenty-six laboratories testing five samples to establish a precision statement for test method E2490.
    01.04.2009 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:C16-1035

    Research Report C16-1035 presents the results of the Interlaboratory Study used to establish the bias for the LTTR test procedure CAN/ULC-S770 Standard Test Method for Determination of Long-Term Thermal Resistance of Closed-Cell Thermal Insulating Foams included in ASTM C1289 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board. Ten laboratories participated in the study. The bias is defined as the difference between the predicted and measured thermal resistance values of a product. Two manufacturers supplied 1.0, 2.0 and 3.0 inch products. The thermal resistance of these products were measured after 1, 2, 3 and 5 years and compared to the predicted values. It was estimated that the precision of the measurements and the calculation of LTTR values, and hence the bias, were reasonably good. In general, the test procedure over predicts the actual thermal resistance of the products used in this round robin.
    31.03.2009 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D01-1149

    An interlaboratory study was conducted by twenty-three laboratories testing twenty panels to establish a precision statement for test method D3274.
    01.03.2009 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D15-1025

    An interlaboratory study was conducted by seven laboratories testing ten samples to establish a precision statement for test method D5827.
    01.03.2009 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D01-1047

    An interlaboratory study was conducted by four laboratories testing two pigment samples to establish a precision statement for test method D4487.
    01.02.2009 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1145

    An interlaboratory study was conducted by six laboratories testing eight samples to establish a precision statement for test method D7245.
    01.02.2009 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1146

    An intralaboratory study was conducted by one laboratory testing two samples (Sample A is a waterborne acrylic-modified alkyd stain blocking primer and Sample B is a commercial acrylic latex stain blocking primer) to establish a precision statement for test method D7514.
    01.02.2009 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D01-1147

    An interlaboratory study was conducted by seven laboratories testing four coating samples (Alkyd, Moisture Cure Urethane, Polyurethane, and Waterborne Acrylic) to establish a precision statement for test method D4541.
    01.02.2009 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D16-1036

    An intralaboratory study was conducted by one laboratory testing five materials to establish a repeatability statement for test method D7504.
    15.01.2009 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:c24-1056

    An interlaboratory study was conducted by eight laboratories testing four samples with a targeted value of Delta E of 6.0 for completion of the exposures to establish a precision statement for test method C1501.
    01.01.2009 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E15-1069

    An intralaboratory study for chloride was conducted by one laboratory testing six analyses on two days for two samples of methanol containing approximately 0.1 mg/kg and 0.5 mg/kg chloride using a carbonate based IC system to establish a repeatability statement for test method E2664.
    01.01.2009 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E28-1031

    An interlaboratory study was conducted by seven laboratories testing two metallic materials to establish a precision statement for test method E1875.
    01.01.2009 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E28-1032

    An intralaboratory study was conducted by one laboratory testing forty bars of sintered polycrystalline alumina with nominal dimensions 127 �, 127 �, 3.2 mm to establish a precision statement for test method E1875.
    01.01.2009 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F02-1027

    An interlaboratory study was conducted by three laboratories testing 120 syringe samples used for the study. The syringes were tested in various ways by various methods to achieve varying targeted results to establish a precision statement for test method F2338.
    01.01.2009 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1657

    An interlaboratory study was conducted by seven laboratories testing ten used and ten fresh oil samples to establish a precision statement for test method D7483.
    15.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C07-1007

    Research Report C07-1007 presents the results of the Interlaboratory Study used to establish the precision and bias statement for ASTM C0110-08, Standard Test Method for Physical Testing of Quicklime, Hydrated Lime, and Limestone, Section 19: Wet Sieve Analysis of Agricultural Liming Materials. The collaborative study included 12 labs that used method C110, to analyze 5 samples.
    01.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1654

    An interlaboratory study was conducted by six laboratories testing twenty samples (oil and temperature pairs) to establish a precision statement for test method D4684.
    01.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1655

    An intralaboratory study was conducted by one laboratory testing four (4) bulk samples with varying bioburden (microbial) loads. Each bulk sample was approximately two (2) gallons in volume and consisted of pooled samples of naturally (microbially) contaminated fuels (Marine diesel) to establish a repeatability statement for test method D7463.
    01.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E28-1030

    An interlaboratory study was conducted by five laboratories testing two samples to establish a precision statement for test method E2448.
    01.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E28-1033

    An intralaboratory study was conducted by one laboratory testing two materials at different temperatures to establish a repeatability statement for test method E855.
    01.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F08-1008

    An interlaboratory study was conducted by six laboratories testing one track to establish a precision statement for test method F2157.
    01.12.2008 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1651

    An interlaboratory study was conducted by eight laboratories testing twelve samples to establish a precision statement for test method D6378.
    15.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D02-1653

    An interlaboratory study was conducted by thirteen laboratories testing twelve samples to establish a precision statement for test method D5293.
    15.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D05-1036

    An interlaboratory study was conducted by nineteen laboratories testing eleven samples to establish a repeatability statement for test method D7348.
    15.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1649

    Interlaboratory Study 328 was conducted to establish a precision statement for D6751, Standard Test Method for Determining of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Laboratory Filtration. The prime objective of the Operability Task Force was in part to assess suitability and effectiveness of the proposed ASTM Cold Soak Filtration method in minimizing the risk of filter plugging in biodiesel blends. The data from this Operability Task Force was used to determine an interim Precision for the proposed ASTM Test Method for Cold Soak Filtration. This report is an attempt to supply such an analysis based on well-established methodologies. Subsequent to test method publication a more thorough round robin is planned. Nine laboratories tested seven fuel types.
    01.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D07-1005

    This research report provides information about the ASTM interlaboratory study (ILS) of precision of ASTM D198 test method for the flexural or bending modulus of elasticity (MOE) of lumber under third-pointing loading. The study was conducted during 2006-2007 in sixteen laboratories in the USA and Canada in accordance with Practice E691. The scope of the ILS was limited to determination of the apparent MOE of 2x4 size materials using the deflection of the beam�,s neutral axis at the mid-span measurements of the load head displacement, similar to the D4761 edgewise bending test method under third-point loading. The test materials involved a limited sample from three product families: machine stress rated (MSR) lumber, laminated veneer lumber (LVL) and laminated strand lumber (LSL). Five specimens of each material were tested in a round robin fashion in each laboratory. Four test results were obtained for each piece of material and orientation, edgewise and flatwise. Span-to-depth ratios of 18 and 21were used in the edgewise and flatwise orientations, respectively. In addition, a steel reference bar (RHS) of comparable stiffness was tested to help tracking any possible changes in the stiffness of the wood materials from repeated loading and to serve as a reference for tracking potential changes in the specimen mass from moisture content changes.
    01.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D18-1016

    An interlaboratory study was conducted by six laboratories testing five sets of samples to establish a repeatability statement for test method D7458.
    01.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F04-1011

    An interlaboratory study was conducted by twelve laboratories testing four samples to establish a precision statement for test method F2129.
    01.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:F04-1011

    An interlaboratory study was conducted by twelve laboratories testing four samples to establish a precision statement for test method F2129.
    01.10.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D31-1011

    An intralaboratory study was conducted by one laboratory testing six materials under two different conditions (",as received", and ",dried out",), at one temperature to establish a precision statement for test method D7477.
    01.09.2008 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F40-1000

    An interlaboratory study was conducted by three laboratories testing seven samples (BCR 680, BCR 681, RoHS 0, RoHS 1, RoHS 2, RoHS 3, RoHS 4) to establish a precision statement for test method F2617.
    15.08.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D11-1098

    This study evaluates the performance characteristics (precision, bias, linearity) of immunoenzymetric assays that are designed to quantify 4 major Hevea brasiliensis (Hev b) allergens (Hev b 1, 3, 5 and 6.02) in latex extracts under field use conditions by following American Society of Testing Materials (ASTM) protocols. This report pertains to D7427. Methods: Quantification of latex allergens in 56 latex glove extracts was performed by 6 laboratories using two-site immunoenzymetric assays and reagents (capture and detection antibodies, standards and controls) provided by one commercial source. Ten glove extracts were analyzed for each of four Hev b allergen concentrations on multiple days to evaluate assay precision and bias and 4 extracts were analyzed at multiple dilutions to evaluate assay linearity (parallelism). Data was collated and analyzed at two coordinating sites.
    01.08.2008 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D20-1246

    An interlaboratory study was conducted by eight laboratories testing five polypropylene samples to establish a precision statement for test method D4440.
    01.08.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F02-1026

    An interlaboratory study was conducted by six labs on seven samples which were prepared to three levels of concentration (low, medium &, high) to establish a precision statement for F2714.
    01.08.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1646

    This ASTM Research Report combines data from two different studies supporting ASTM D7416-09. The more recent reproducibility study involves testing thirteen different in-service lubricant samples through seven different five part integrated tester laboratories, each with a different operator. The earlier repeatability study involves testing two different in-service oil samples thirty times each in a single five-part integrated tester laboratory. All samples were tested using the multiple measurement sensors within the five part integrated tester. In addition to reporting of quantified measurements, diagnostic interpretation of that data is also reported in score values for wear status, contamination status, and chemistry status for the each sample data set.
    01.07.2008 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D04-1027

    An interlaboratory study was conducted by eight laboratories testing five samples to establish a precision statement for test method D545.
    01.07.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D04-1028

    An interlaboratory study was conducted by 11 laboratories testing 28 Superpave Gyratory Compactors with 50 different molds to establish a precision statement for test method D7115.
    01.07.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F01-1019

    An interlaboratory study was conducted by six laboratories testing three lamps to establish a precision statement for test method F2360.
    01.07.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E01-1109

    An interlaboratory study was conducted by six laboratories testing a single sample to reflect the new oxygen scope maximum of 0.5% in the precision statement in test method E1409.
    15.06.2008 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F01-1018

    An interlaboratory study was conducted by twelve laboratories testing four samples to establish a precision statement for test method F76.
    15.06.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:C07-1005

    An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for test method C0110.
    01.06.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D01-1143

    An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for test method D4446.
    01.06.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D27-1019

    An interlaboratory study was conducted by one laboratory testing two oil samples to establish a precision statement for test method D2300.
    01.06.2008 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1628

    An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method D1662.
    01.05.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1639

    An interlaboratory study was conducted by eight laboratories testing ten samples to establish a precision statement for test method D5001.
    01.05.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D14-1012

    An interlaboratory study was conducted by eight laboratories which tested three materials to establish the precision statement of standard specification D3930.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D14-1013

    An interlaboratory study was conducted by nine laboratories which tested three materials to establish the precision statement of test method D3931.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E15-1062

    An interlaboratory study was conducted by seventeen laboratories which tested three materials to establish the precision statement of test method E1064.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E15-1063

    An interlaboratory study was conducted by fifteen laboratories which tested four materials to establish the precision statement of test method E2409.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E15-1064

    An interlaboratory study was conducted by seventeen laboratories which tested three materials to establish the precision statement of test method E1615.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E15-1065

    An interlaboratory study was conducted by seventeen laboratories which tested three materials to establish the precision statement of test method E2313.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E15-1066

    An interlaboratory study was conducted by seventeen laboratories which tested two materials to establish the precision statement of test method E2193.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E15-1067

    An interlaboratory study was conducted by seven laboratories which tested one material to establish the precision statement of test method E2469.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F02-1025

    An interlaboratory study was conducted by laboratories testing five samples to establish a precision statement for test method F2622.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F08-1007

    An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method F1446.
    01.04.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1635

    An interlaboratory study was conducted by eleven laboratories which tested twenty seven materials to establish the precision statement of test method D4294.
    01.03.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E01-1108

    An interlaboratory study was conducted by eight laboratories which tested seven materials to establish the precision statement of test method E2575.
    01.03.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1641

    An interlaboratory study was conducted by sixteen laboratories testing sixteen diesel fuel samples to establish a precision statement for test method D7170.
    15.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D01-1141

    An interlaboratory study was conducted by ten laboratories which tested twenty materials to establish the precision statement of test method D7305.
    02.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1142

    An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method D6736.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1634

    An interlaboratory study was conducted by five laboratories which tested three materials to created a precision statement for test method D6973.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1636

    An interlaboratory study was conducted by laboratories testing 117 diesel fuel and jet fuel samples to establish a precision statement for test method D7215.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1638

    An interlaboratory study was conducted by fourteen labs which tested eighteen materials to establish a precision statement for test method D4739.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D04-1029

    An interlaboratory study was conducted by the MTO proficiency sample testing program testing samples that cover a wide range of Ontario aggregate types and values for the different properties establish a precision statement for test method D6928.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D04-1030

    An interlaboratory study was conducted by the MTO proficiency sample testing program testing samples that cover a wide range of Ontario aggregate types and values for the different properties establish a precision statement for test method D7428.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D05-1034

    An interlaboratory study was conducted by fourteen laboratories which tested nine coal samples to establish the precision statement of test method D5373.
    01.02.2008 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D20-1249

    An interlaboratory study was conducted by seven laboratories testing five plastic materials to establish a precision statement for test method D3418.
    11.01.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D11-1097

    An interlaboratory study was conducted by twelve laboratories which tested four materials to establish the precision statement of test method D7426.
    01.01.2008 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E33-1012

    An interlaboratory study was conducted by laboratories testing six samples to establish a precision statement for test method E1050.
    01.01.2008 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D13-1122

    An interlaboratory study was conducted by five laboratories testing nine cotton samples to establish a precision statement for test method D1447.
    01.12.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D27-1018

    An interlaboratory study was conducted by twelve laboratories which tested four materials to establish the precision statement of test method D6786.
    01.12.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D35-1011

    An interlaboratory study was conducted by nine laboratories which tested one material to establish the precision statement of test method D7179.
    01.12.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E28-1027

    An interlaboratory study was conducted by eight laboratories testing two low carbon sheet steel samples to establish a precision statement for test method E646.
    01.12.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F04-1010

    An interlaboratory study was conducted by eleven laboratories testing three samples to establish a precision statement for test method F2516.
    01.12.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F23-1007

    An Interlaboratory evaluation of test method F739 was performed in 2005. Nine independent laboratories participated, each testing in triplicate, two, challenge chemical/clothing material pairs. The challenge chemicals were acetone and ethanol.
    07.11.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1139

    Interlaboratory Study to Establish Precision Statements for ASTM D7358-07, Standard Test Method for Water Content of Water- Reducible Paints by Quantitative Calcium Hydride Reaction Test Kit
    01.11.2007 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1627

    An interlaboratory study was conducted by twenty laboratories testing thirteen samples to establish a precision statement for test method D7397.
    01.11.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D08-1013

    An interlaboratory study was conducted by ten laboratories which tested three materials to establish the precision statement of test method D5147.
    01.11.2007 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D18-1014

    An interlaboratory study was conducted by twenty-four laboratories testing a single sample of rigid polyurethane foam to establish a precision statement for test method D2166.
    15.10.2007 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1624

    An interlaboratory study was conducted by five laboratories which tested sixteen materials to establish the precision statement of test method D7371.
    01.10.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F03-1016

    An interlaboratory study was conducted by seven laboratories which tested three materials to establish the precision statement of test method F2523.
    01.10.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1640

    This interlaboratory study to establish precision statements for ASTM D7347 was performed according to this method with five denatured alcohols run in duplicate at five laboratories.
    01.08.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1619

    An interlaboratory study was initiated using two vapor pressure methods, ASTM D5191 and D6378. This study established a precision and bias statement for D6378 and evaluated the precision and bias statement for D5191. Finally, this report compared the precision statements of D5191 versus D6378.
    20.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1620

    An interlaboratory study was conducted to establish a precision statement for D7346, Standard Test Method for No Flow Point of Petroleum Products.
    15.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1621

    An interlaboratory study was conducted by laboratories which tested thirty three materials to establish the precision statement of test methods D86, D7345, and D7344.
    15.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1622

    The precision of ASTM D2622 was determined by the statistical analysis of results obtained from an interlaboratory study that included 27 samples including gasolines, distillates, biodiesel, residual oils, and crude oils. A pooled limit of quantitation (PLOQ) of approximately 3 mg/kg S, was determined for all sample types. Precision for gasoline and diesel samples, as well as for high- power and low-power source XRF instruments were also determined.
    15.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1623

    An interlaboratory study was conducted by seventeen laboratories which tested seven ester-based and eight non-ester-based automotive transmission fluids to establish the precision statement of test method D7214.
    15.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E28-1025

    An interlaboratory study performed by one laboratory which tested five different materials that spanned a wide range of hardness and modulus to establish an initial precision and bias statement for E2546.
    02.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:C21-1005

    An interlaboratory study which involved seven laboratories testing five materials to establish a precision statement for test method C1028.
    01.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1137

    An interlaboratory study was performed by seven laboratories that tested four samples was conducted to establish a precision statement for test method D2066.
    01.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E12-1003

    An interlaboratory study was conducted using three photo luminescent film samples which were tested by eight laboratories to establish a precision statement for test method E2073.
    01.07.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D01-1135

    An interlaboratory study was performed by seven laboratories testing five materials was conducted in 2006 to establish a precision statement for the test method D4060.
    01.06.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D05-1032

    An interlaboratory study to establish a precision statement for test method D6342 for the determination of major and minor elements in ash from coal, coke, and solid combustion residues.
    01.06.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D05-1033

    The purpose of this interlaboratory test study is to analyze various types of ash from different sources (laboratory, utility processes, etc.) for total sulfur by high temperature combustion using a promoter so that a precision statement for test method D5016 could be established.
    01.06.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D19-1195

    An interlaboratory study was conducted by six laboratories testing five samples to establish a precision statement for ASTM D7283.
    01.06.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D35-1010

    An interlaboratory study which involved ten laboratories testing three materials to establish a precision statement for test method D7056.
    01.06.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E28-1024

    An interlaboratory study performed by one laboratory which tested six materials to establish the precision statement of test method E2492.
    01.06.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:A05-1003

    An interlaboratory study was conducted to establish a precision statement for A90/A90M.
    01.05.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D05-1031

    An Interlaboratory Study was conducted to establish a precision statement for D7348.
    01.05.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D08-1012

    An interlaboratory study was run in which randomly drawn test specimens of three materials (sand-surfaced SBS-modified base sheet, fiberglass-reinforced SBS-modified cap sheet, and polyester-reinforced APP-modified cap sheet) were tested for machine direction (MD) tear strength and cross-machine direction (CD) tear strength in each of ten laboratories to establish a precision statement for the section of tear strength in test method D5147.
    01.05.2007 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D13-1121

    IAn interlaboratory study was conducted by six laboratories testing three samples to establish precision statements for ASTM D7330.
    01.05.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:E28-1023

    An interlaboratory study was conducted to establish a precision statement for E0010, Brinell Hardness of Metallic Materials.
    24.04.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E28-1022

    An interlaboratory study was conducted for test method E18 to represent the change in the precision statement from the use of steel balls to carbide balls for all scales that use a ball indenter.
    20.04.2007 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D19-1179

    This round robin was intended to generate precision and bias data that is representative of the waters coved in the scope of this ASTM method, D7315. This study covered the approximate range of 1 to 4000 turbidity units. The round robin was well represented by a host of different turbidity technologies that varied among the following criteria: Light source, Single versus multiple detectors and Detection angles.
    15.04.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E33-1011

    An interlaboratory study for test method C423 was conducted by ten laboratories to determine whether uncertainty in measuring decay rate contributed significantly to the uncertainty seen in interlaboratory comparison of sound absorption measurements and establish precision statements for the test method.
    11.04.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1617

    Research report D02-1617 describes an interlaboratory study to establish precision statements for ASTM D87, standard test method for melting point of petroleum wax (cooling curve).
    19.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1616

    This report is the analysis of the data from the international round robin tests to establish precision statements for ASTM D5706 organized by the DIN 51834 working group testing in 2005 with 1 mm of stroke and with 2 mm of stroke in 2006.
    15.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1614

    The precision of this test method was determined by the statistical evaluation of the interlaboratory test results. For measuring total chloride, both methods of suppression provided a single precision statement. For total and potential sulfate, the data indicated two distinct statistical populations, reflecting use of the packed bed tri-chamber suppressor regeneration approach and the continuous suppressor membrane regeneration approach.
    12.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D02-1615

    An interlaboratory study was conducted to establish a precision statement for D7318, Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration.
    12.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1613

    The precision of test method D4684 was determined by the statistical examination of results from an interlaboratory program in which 10 to 11 samples were tested in 7 to 9 laboratories at -25, -30, -35 and -40 degrees C utilizing thermo-electric cooled MRV',s.
    07.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C16-1033

    An interlaboratory study was conducted by six laboratories testing five different materials to establish a precision statement and bias statement for test method C0209.
    01.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F17-1049

    An interlaboratory study was conducted by three laboratories which tested six materials to establish the precision statement of test method F2263.
    01.03.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1612

    The precision statement of test method D4684 was determined by the statistical examination of results from an interlaboratory program in which 10 to 11 samples were tested in 7 to 9 laboratories at -25, -30, -35 and -40 degree C utilizing thermo-electric cooled MRV',s.
    20.02.2007 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D01-1140

    An interlaboratory study was conducted by one laboratory which tested five materials to establish the precision statement of test method D7245.
    01.02.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D26-1019

    An interlaboratory test was undertaken to determine the precision and bias of standard test method D2106 Method C in which the amine is determined by gas chromatography per ASTM D6806 and the amine acid acceptance is calculated from the amount of amine present. Two different amines were tested.
    01.02.2007 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C09-1032

    An interlaboratory study was conducted which involved five operators and three concrete mixtures to establish precision values for ASTM test method C403/C403M.
    29.01.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D01-1136

    An interlaboratory study was performed by nine laboratories that tested four different materials to establish a precision statement for test method D4960.
    16.01.2007 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D16-1035

    An interlaboratory study was conducted by 36 laboratories testing eight samples to establish a precision statement for ASTM D7183.
    15.01.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1610

    An interlaboratory study was performed by twelve laboratories on six used railroad diesel engine oils to establish a precision statement for test method D7317.
    10.01.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1611

    An interlaboratory study was conducted to establish the precision statement of test method D7328.
    01.01.2007 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C01-1010

    An interlaboratory study was conducted by seven laboratories which measured chemical shrinkage of a single Portland cement that was distributed in vacuum-sealed bags to establish the precision statement of test method C1608.
    21.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1608

    An interlaboratory study was performed by ten laboratories analyzing nine grease samples to establish a precision statement for test method D7303.
    20.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D08-1010

    An interlaboratory study was run in which randomly drawn test specimens of three materials (sand-surfaced SBS-modified base sheet, fiberglass-reinforced SBS-modified cap sheet, and polyester-reinforced APP-modified cap sheet) were tested in eleven laboratories to establish a precision statement for the selvage thickness test method in ASTM D5147.
    20.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D08-1011

    An interlaboratory study was run in which randomly drawn test specimens of three materials (sand-surfaced SBS-modified base sheet, fiberglass-reinforced SBS-modified cap sheet, and polyester-reinforced APP-modified cap sheet) were tested in eleven laboratories to establish a precision statement for the sheet thickness test method in ASTM D5147.
    20.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:E33-1010

    An interlaboratory study was conducted that had the participation of sixteen laboratories to establish the precision and bias statement of test method C423.
    19.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1648

    An interlaboratory study was conducted by eight laboratories testing four samples to establish a precision statement for test method D7280.
    12.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1607

    An interlaboratory study was conducted to establish precision statements for test method D6895.
    08.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1605

    An interlaboratory study was conducted to establish the precision statement for test method D6549.
    07.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D02-1606

    An interlaboratory study was conducted to establish the precision statement of test method D6482.
    07.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:E01-1061

    An interlaboratory study to justify the revision of the scope of test method E539 to include the elements: chromium, copper, manganese, molybdenum nickel, silicon, tin, and zirconium.
    07.12.2006 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:F11-1018

    An interlaboratory study was conducted by eight laboratories which tested five materials to establish the precision statement of test method F2607.
    16.11.2006 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D34-1018

    An interlaboratory study was conducted by laboratories testing samples to establish a precision statement for test method D7203, Standard Test Method for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor.
    11.11.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1602

    An interlaboratory study which involved 10 laboratories and 15 test samples to establish the precision statements for ID and DCN in test method D6890.
    19.09.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F04-1009

    An interlaboratory study was conducted by six laboratories which tested two different materials to establish the precision statement of test method F2082.
    15.08.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1618

    Long-standing criticism of the relatively poor precision of the important ASTM Test Method D 892 was addressed in a 2003 Interlaboratory Study (Round Robin) in attempts to optimize the operation of the method and improve its precision. The twelve (12) participating laboratories included ten (10) user laboratories, one commercial test laboratory and one foam test instrument manufacturer',s laboratory. Eight of the laboratories used liquid baths and four used air baths.
    01.08.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:F02-1023

    An interlaboratory study was conducted by eighteen laboratories which tested three material combinations with a series of techniques to establish the precision statement of test method F88.
    10.07.2006 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:C01-1008

    Two interlaboratory studies were conducted to establish a precision statement for C-359. Test method C-359 prior to this study lacked a precision and bias statement. Inter-laboratory testing programs conducted in 2004 and 2005 provided data sufficient to construct such a statement using indexes derived from the measured data. This report details the Inter-laboratory results, the derivation of the indexes and the precision statements for those indexes.
    01.07.2006 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:E12-1002

    An interlaboratory study was conducted by one laboratory testing 6 specimens to provide data representative of the precision and bias for measurements made in accordance with test method E991.
    01.07.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F11-1017

    An interlaboratory study which involved five laboratories and four central vacuum cleaning units was conducted to establish the precision and bias statement of test method F2544.
    01.07.2006 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1591

    An interlaboratory study was conducted by eighteen laboratories analyzing five oil samples to establish a precision statement for test method D7214.
    13.06.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E01-1060

    An interlaboratory study was conducted by six laboratories which tested sixteen materials to establish the precision statement of test method E2465.
    30.05.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:B09-1012

    An interlaboratory study was conducted to establish a precision statement for ferrous and copper base sintered parts for ASTM test method B328.
    29.04.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E12-1001

    An interlaboratory study was conducted by two organizations which used sixteen instruments in nine different models to collect three replicate readings of twelve ceramic color standards so a precision statement could be established for test method E1349.
    30.03.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1603

    An interlaboratory study to establish a precision statement for the free and total glycerin in test method D6584.
    01.03.2006 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1604

    An interlaboratory study was performed using 10 used and 5 fresh oil samples (viscosity range 25 to 150 mm2/s at 40�,C and 6 to 16 mm2/s at 100�,C) and 15 laboratories, to establish the precision statement in test method D7279.
    01.03.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D01-1134

    An interlaboratory study was conducted for D1316 using Manual and Automatic (ADM-1) procedures of the test method in which one operator in each of seven labs used both manual and automatic (ADM-1) methods.
    22.02.2006 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1589

    An interlaboratory study was conducted by nine laboratories testing six samples for small vials that ranged from 0.1% to 25% to establish a precision statement for test method D4530.
    15.02.2006 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1587

    An interlaboratory study was conducted by nine laboratories testing six gasoline samples and six diesel fuel samples to establish a precision and bias statement for test method D7212.
    01.02.2006 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D20-1242

    An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for the CIELAB color in test method D7133.
    18.01.2006 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E37-1035

    An interlaboratory study was conducted in which thirteen laboratories using four instrument models from two manufacturers tested calibration slope to establish the precision statement of test method E2206.
    22.12.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E37-1036

    An interlaboratory study was conducted by eight laboratories which tested two materials to establish the precision statement of test method E2403.
    22.12.2005 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1584

    An interlaboratory study was conducted to establish a precision statement for test method D5864. Five laboratories ran this study by testing ten different lubricants and base stocks.
    13.12.2005 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:E28-1026

    An intralaboratory study was conducted by a single laboratory which tested six samples to establish a precision statement for test method E2448.
    01.12.2005 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:F04-1008

    An interlaboratory study was conducted by seven laboratories which tested three materials to establish the precision statement of test method F2004.
    01.10.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:E01-1040

    An interlaboratory study was conducted by ten laboratories which tested three materials to establish the precision statement of test method E1915.
    27.09.2005 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:E37-1034

    An interlaboratory study was conducted by twelve laboratories using six instrument models from three manufacturers to establish the precision statement of test method E2347.
    12.09.2005 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:C16-1032

    An interlaboratory study on the breaking load and flexural properties of block-type thermal insulation was conducted in 2005 to establish precision statements for C203. The eight laboratories participating in the study measured the breaking load/flexural property of five randomly selected samples of four different block-type EPS/XPS thermal insulations at two different cross-head speeds.
    16.08.2005 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D02-1580

    An interlaboratory study was conducted to establish a bias statement for test method D86 by comparing the manual and the automated apparatus and procedures.
    08.08.2005 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D02-1579

    An interlaboratory study was run by laboratories testing lubricating test oils at 80�,C and 120�,C to establish a precision statement for test method D6425.
    25.07.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D16-1034

    An interlaboratory study performed by three laboratories which tested five materials to establish the precision statement of test method D6143.
    20.07.2005 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C09-1031

    An interlaboratory study was conducted to establish precision values for nuclear gages operating in the direct transmission mode when testing unhardened concrete according to test method C1040.
    19.07.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1592

    A round robin was carried out in 2004 involving two EDXRF based methods based on (i) a low-background proportional detector and (ii) polarized source for sulfur determination in the range 1 to 60 mg/kg. This resulted from a recommendation from the 2002 round robin report of CEN TCI9 WG27 to investigate the precision of new generation EDXRF equipment once it became more widely available. Due to the interest in low level sulfur measurement ( 50 mg/kg and less) in fuels was becoming of increasing relevance in both Europe and the USA, it was decided to carry out a joint EI/ASTM exercise using fuels of interest sourced from both areas. Nine laboratories participated in the low-background proportional detector method and eleven laboratories in the polarization method.
    29.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D02-1588

    An interlaboratory study was conducted to establish a precision statement for test method D2624.
    15.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:D02-1586

    An interlaboratory study was run by eight laboratories testing ten samples to establish the precision statement of test method D7224.
    06.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D18-1008

    An interlaboratory study performed by three laboratories which tested three materials to establish the precision statement of test method D698.
    02.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D18-1009

    An interlaboratory study performed by three laboratories which tested four reference soils to establish the precision statement of test method D854.
    02.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D18-1010

    An interlaboratory study performed by three laboratories which tested four reference soils to establish the precision statement of test method D1140.
    02.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D18-1011

    An interlaboratory study was conducted by laboratories which tested soil samples of reference soil SP-1 to establish a precision statement for specifications D4253 and D4254.
    02.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D18-1013

    An interlaboratory study performed by three laboratories which tested three materials to establish the precision statement of test method D4318.
    02.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D19-1184

    Interlaboratory Study to Establish Precision Statements for ASTM D7168, Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
    01.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:D20-1244

    An interlaboratory test was conducted by seven laboratories testing four samples to establish a precision statement for test method D7253. Each laboratory used a colorimetric endpoint titration for the generation of the data used to develop the statement.
    01.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F02-1022

    An interlaboratory study was conducted by eight laboratories which tested five materials to establish the precision statement of test method D3985.
    01.06.2005 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1575

    An interlaboratory study was conducted to determine if a new Digital Conductivity Meter, Model 1153 was equivalent to the Emcee Model 1152 Digital Conductivity Meter. This study demonstrated that the two models were equivalent and the repeatability data that was obtained by this study is in the test method D2624.
    24.05.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1582

    An interlaboratory study was run by nine laboratories testing ten test oils to establish a precision statement for test method D7109.
    19.05.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C09-1029

    Interlaboratory Study to Establish Precision Statements for ASTM C1580, Standard Test Method for Water-Soluble Sulfate in Soil
    04.05.2005 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1599

    In an interlaboratory study, molybdenum was determined by analyzing ten oil and eight additive samples by participating laboratories so that a precision statement could be established for test method D4951.
    01.05.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1577

    This report documents two interlaboratory studies to generate precision data for test method D7171 for the determination of the mass percent of hydrogen in middle distillate petroleum products by low-resolution pulsed nuclear magnetic resonance spectroscopy.
    19.04.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C16-1031

    Research report C16-1031 describes an interlaboratory study performed by four laboratories that reports the warpage results to determine the precision and bias of C411.
    07.04.2005 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1569

    This report documents two interlaboratory studies to generate precision data for test method D7111 for quantitative analysis of trace elements in middle distillate fuels.
    05.04.2005 - PDF - Englisch - ASTM
    mehr dazu
    115,50 €

  • ASTM Research Report RR:C24-1055

    Research Report C24-1055 establishes precision statements for C1635. Two interlaboratory studies were conducted. The first study had five laboratories test five sealants. The second study had five laboratories test two sealants.
    24.03.2005 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D13-1120

    An interlaboratory study was conducted by eight laboratories testing four fabric samples to establish a precision statement for test method D7142.
    04.03.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1593

    An interlaboratory study was conducted involving thirteen laboratories and eight samples comprising three diesel fuels, two kerosines, two JetA/A1 fuels and hexadecane to establish a precision statement for test method D7236.
    20.02.2005 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:F02-1021

    An interlaboratory study was conducted by eight laboratories which tested five materials to establish the precision statement of test method D3985.
    03.02.2005 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:C16-1029

    An interlaboratory study was conducted at six laboratories testing seven samples to establish a precision statement for linear shrinkage tests in test methods C1427 and C534.
    10.01.2005 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D27-1017

    An Intralaboratory Study was conducted to estimate the repeatability by one laboratory for 7 replicates of a fluid containing a nominal 1 ppm by weight.
    01.01.2005 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:D02-1585

    An interlaboratory study was conducted by ten cooperators testing two different solid bonded films to establish the precision statement for test method D7217.
    22.12.2004 - PDF - Englisch - ASTM
    mehr dazu
    81,90 €

  • ASTM Research Report RR:D02-1565

    An interlaboratory study was conducted to establish a precision statement for Procedure B of test method D5706.
    16.12.2004 - PDF - Englisch - ASTM
    mehr dazu
    89,25 €

  • ASTM Research Report RR:C09-1028

    An interlaboratory study was conducted by eleven operators testing two concrete batches at around 75°, C to establish precision statements for test method C1064/C1064M.
    15.12.2004 - PDF - Englisch - ASTM
    mehr dazu
    56,70 €

  • ASTM Research Report RR:C09-1027

    This report consists of analysis of the results from an interlaboratory study conducted to develop precision data for the tests covered by ASTM Test Method C 796. Three laboratories provided data that were analyzed using the ASTM Practice E 691 software.
    09.12.2004 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

  • ASTM Research Report RR:D02-1555

    An interlaboratory study was conducted by twelve laboratories to establish a precision statement for test method D7042.
    03.12.2004 - PDF - Englisch - ASTM
    mehr dazu
    102,90 €

  • ASTM Research Report RR:D19-1177

    An interlaboratory study performed by eight laboratories which tested ten samples to establish the precision statement of test method D5673.
    03.12.2004 - PDF - Englisch - ASTM
    mehr dazu
    95,55 €

  • ASTM Research Report RR:D13-1119

    An interlaboratory study was conducted by five laboratories which tested three materials to establish the precision statement of test method D5587.
    28.10.2004 - PDF - Englisch - ASTM
    mehr dazu
    63,00 €

Artikel 601 bis 800 von insgesamt 1485

Aufsteigende Sortierung einstellen
pro Seite

Liste  Raster